Outlook - Receiving Email Problem

1. Receiving emails very slow in Outlook. It is much slower than receiving it on my mobile phone.
2. Also keep receiving the following error message. The name/account mentioned in this error message is no longer in use.
"Task "Vickie Wong Arrowcap - Receiving' reported error (0x80CCC92): 'Your e-mail server rejected y our login. Verify your user name and password for this account in Account Settings.The server responded: -ERR authorization failed Check your sever
settings.' "
Thanks

Hi Yu888,
Solution:
1.)
Check plug-ins (third party) in your Outlook via using safe mode.
Note: Use, the “outlook.exe /safe” command in search box.
And see the result, it will hopefully boost the sending/receiving speed of emails.
2.) 0x80CCC92 error in MS-Outlook commonly can cause due to number of reasons such as:
*Wrong inputs of server details for Outlook (especially POP3)
*Improper synchronization between Outlook and Server
*Corruption in PST File
To fix Outlook error 0x80CCC92, once check the inputs of server details and if you find it correct then apply scanpst.exe to know the exact reason behind this error.
You can also try the free Outlook PST Recovery Software, If you do not find any relevant solution for this error from the above given manual methods.
For more: http://gallery.technet.microsoft.com/Outlook-PST-Recovery-37c163d7
Thanks
Clark Kent

Similar Messages

TS3276 receiving email problem

This what works fine: I can send email out fine. I recieve solicitor emails/junk mail (i.e., Shutterfly). I recieve email from private senders(friends), even if it in a group message.
This where the proble is: I cannot receive emails when the sender responds by choosing "reply or reply all" and a day or two passes and that person recieves a response that the message failed or was not delievered. It lists an email address that is not our
I have trouble shooted to see if emails are receieved from our servers wedsite and all is delivered correctly.
The problem onle seems to be if I use my email from the Mac "stamp" icon.
<Email Edited by Host>

If you are sending and receiving some mail with the Mail.app tool ("the stamp icon" tool) and having issues receiving certain mail from certain senders, then your local settings are likely correct.
If you're not running your own mail server here, you'll want to contact whomever is providing your mail services for assistance with this. (Given Mail.app is working, this is likely the mail server that's involved.)
If you are running OS X Server as your mail server, then this would imply either a mail server configuration issue or a DNS configuration issue, or possibly both. If you post your public domain, folks here can verify the DNS configuration, or you can perform the same checks with the dig command:
Launch Terminal.app from Applications > Utilities and...
dig +short example.com MX
dig +short mail.example.com
dig +short -x returned.ip.address
If DNS is correct, then the dig MX record for your domain (first command) will return the host name of your mail server. The forward translation of your mail server host name (second command) will provide the IP address, and the third command should return the same name as your MX record and the input to the second command.
You'll also need to look at the mail server logs, to see if you can determine why some of the mail is bouncing. (Getting the wrong host name for your mail server — the so-called MX record — from public DNS will definitely cause messages to be misrouted, so that'd be one of the first details to investigate.)

Receiving email problem

Hello,
I need to be able to receive emails with a pdf attachment in them.
Sending emails from the transaction SO01 works, but how can I configure the inbox?
I read in a few blogs that I need to ask the Exchange guys to make a subdomain and link that to the SAP system. But what exact information should I give them and what exactly should I change in the system to make this work?
Please give me some detailed information cause I can't seem to get it working with blogs/other posts.
Thanks upfront
Regards,
PJ

Hi,
Try using FM "SO_NEW_DOCUMENT_ATT_SEND_API1".
this FM helps us to send the files/data/text anything in SAP inbox, outbox and in Internet email id as well.

Outlook sending Emails Problem

Dear Team,
We have problem with ms outlook2010.
we are using pop accoun,When we are sending any mail from outlook2010 some time 3mb file will sending immediately and sometimes i will send 1mb file it will take long time,
Kindly let me know is there any setting is there in outlook for sending mails
Regards
Audi
9035904148

Hi Audireddy,
Yes, I am totally agree with
Anil’s suggestion (as you should first check it). But, it seems that you are using third party plug-ins or add-ins in Outlook and it is one of the common causes of slow sending/receiving of emails.
Open
Outlook in safe mode by using the “outlook.exe /safe” and then try to send an email if it works properly, then immediately turn off those additional plug-ins.
I would like to suggest you the given link, which is based on how to optimize Outlook’s performance:
http://support.microsoft.com/kb/2695805/en-us
Hope it will work!!!!
Note: Improve community discussions by marking the answers helpful.
Thanks
Clark Kent

IMS 5.2 IMAP and keep copy on server / receive emails problem

Hi everyone,
Here is my problem: I ve installed iMS 5.2 Patch 1 with NDS 4.16 on a Windows 2000 server env.
I configured one main domain and 2 other domains. Everything was going perfectly, but I remarked a strange problem early: I ve my outlook configured to keep a copy of my emails on the server and sometimes I connect to my account via the webmail and thee is no more emails. The mailbpx is empty. I have to reconnect 10 min. later and there, my emails are back...
I have the same problem with my outlook. I am using IMAP protocol and sometimes my outlook says there is no emails in my folder. I ve to wait the next day to recover my emails (or I have to connect via my webmail). If I use the POP protocol, Outlook (or another email client) consider that the new emails received are not new and then it doesn't recover them in my local mailbox.If I wait some time, then, it recovers EVERY email in my webmailbox (even if they already existed in my local mailbox, that creates a lot of double copies of each emails). Is there a way to avoid this and to make sure that it doesn't download every old email each time ? I tried this on a PC with outlook as the client and on a Mac with Entourage as the client and it does the same on both machines.
Could please someone light my lantern because I am a bit lost. I searched a lot for an explanation but did not found any.
Thank you very much, Fr�d�ric

In your imta.cnf:
In the channel blocks, tcp_local now reads:
! tcp_local
tcp_local mailfromdnsverify smtp mx remotehost inner switchchannel identnonelimited subdirs 20 maxjobs 1 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth sourcebrightmail backoff "pt30m" "pt1h"
I just added "sourcebrightmail" to the line.
In the option.dat, I added these lines. You will need to use the actual path/filenames on your system:
BRIGHTMAIL_CONFIG_FILE=/usr/iplanet/server5/msg-dusty/imta/config/SpamAssassin
BRIGHTMAIL_LIBRARY=/usr/iplanet/server5/bin/msg/imta/lib/libspamass.so
BRIGHTMAIL_NULL_ACTION=data:,require "fileinto"; fileinto "SPAM"
After making the changes,
imsimta cnbuild
imsimta restart dispatcher.
I made one other change, in the start-msg script, by adding this line:
/usr/download/spamassassin/spamd -a &
so that spamd is started whenever I start iMS.

Outlook Sent Email Problem!

I use Outlook 2010 and use two accounts one is btinternet and the other a gmail. Over the last few days when I send a gmail it posts a copy in the gmail "Sent Box" and also posts the same copy in the btinternet "Sent Box" - this does
not happen if I reverse the process. I have trawled Microsoft and other help sites and have not come across any reference to this particular problem or solution only the problem of saving emails twice in one "Sent Box" can anyone help please?
Keith_53 at Home.

Hi,
Have you checked if you have set any Outlook rule to move a copy of sent items to the other account? To check this, please go to Home tab > Rules > Rules & Alerts.
If you have any antivirus or third-party add-in installed, please temporarily turn off the antivirus and open Outlook in safe mode to test the issue again. To open Outlook in safe mode, press Windows key + R to open the Run command, type
outlook.exe /safe and press Enter.
If above doesn't make any difference, please try to create a new mail profile in Control Panel and reconfigure your email accounts to check the result.
Thanks,
Steve Fan
TechNet Community Support

Receive email problem

Hello,
I try telnet email test but i have this error. How i can fix it?
451 4.7.0 Temporary server error. Please try again later. PRX4
i tried DNS settings , Host file update , ReCreate Receive Connectors but all failed.
Detailed logs ;
D:\Exchange\TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpReceive
Message or connection acked with status Retry and
response 451 4.4.0 Primary target IP address responded with: ""501
5.5.4 Required arguments not present."" Attempted failover to
alternate host, but that did not succeed. Either there are no alternate hosts,
or delivery failed to all alternate hosts.
D:\Exchange\TransportRoles\Logs\FrontEnd\Connectivity
2013-11-29T11:04:36.130Z,08D0BB050818EAC4,SMTP,internalproxy,-,Messages: 0 Bytes: 0 (Retry : Required arguments not present)
2013-11-29T11:05:12.724Z,08D0BB050818EAC6,SMTP,internalproxy,+,Undefined 00000000-0000-0000-0000-000000000000;QueueLength=<no priority counts>

Hi Longbow,
I would like to clarify the following things for troubleshooting:
1. Please make sure that "Exchange server authentication" on receive connector "Default SERVERNAME" is enabled.
2. Run ipconfig/flushdns to flush local DNS resolver cache.
3. If the issue persists, please restart Hub Transport service and check the result.
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Receive Email Problems - Might Help?

I have read a few posts about email having stopped working. I use my IPhone 4S to access all of my email accounts and very rarely do I log in using web-mail. On Monday just passed, I noted that my IPhone had started reporting errors when trying to access my primary BT email and I havent received one since Monday. Web-mail seemed to function fine and I have received various email nearly every day.
Anyhow, just got around to looking into the problem. On the IPhone email account settings, I tried all the usual setting chnges etc but none worked. Became very frustrated with it!
In the end I deleted the primary account settings from the phone and re-created the account from scratch. Success! The first mail that arrived was a 'Welcome' to the new BT Mail system - I had been migrated. Curiously, when I logged in to the web-mail, no 'Welcome' email. Start with this link and follow the buttons to where you need to be:
BT Email Set up, advice etc
Obviously, it worked for me and can't gaurantee it will work for you. Delete accounts/change settings at your own risk!!
Keyser

Keyser
I have tried that a few times over the last couple of days with no luck, will try again, will try anything to sort this issue out
Cheers

IPad / iPhone / Outlook 2003 email problems

Hi,
I have an issue with btinternet emails being available on all 3 devices.
Having changed the iphone and ipademail accounts to yahoo accounts the "account in use on another device" issue has now been resolved. However the issue i am now facing is that once outlook downloads all emails those emails then disappear from the iphone and ipad leaving the inboxes empty.
I have read through a number of suggestions and it seems that Outlook 2003 needs to be set up as an Imap account for incoming mail to synchronize with btinternet and ensure the same emails remain on the iphone / ipad.
Does anyone have any details or can the MODs help me with setting up my outlook 2003 account to imap in order to resolve this problem?
regards,
LP

My android phone has an option to remove messages from the phone when they are deleted from the server. If the iphone has similar maybe you just need to uncheck it.
You can click the white star next to this message if you think it was helpful.

Sending and receiving email problem

for three months I have been unable to receive and send emails. Is this just a storage problem and if so is there an alternative to buying more storage space?
Thanks,
not happy iCloud customer

Hello iCloudsti"ks,
Thank you for contacting Apple Support Communities.
It's hard to say from the limited information what could be causing your issues. You can use the following article to troubleshoot your send/receive issues with iCloud mail:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
Regards,
Jeff D.

Outlook 2007 email problem

I've got lots of old emails from 2005 through 2014 on my Comcast server, in various folders such as "sent" and other named folders there. I can't download any of those emails into my Outlook 2007 program on my desktop computer, where I keep all my other old emails stored essentially forever. Does anyone know how to get those emails (presently "trapped" on the Comcast server) downloaded? I have successfully "moved" some other more recent emails from my Comcast "sent" folder to my Comcast "inbox" folder, and then those have automatically been downloaded to my Outlook folder; however, this process does not work with those older email files. Any ideas, anyone? Thanks!

You cannot move FOLDERS from Xfinity Connect, but you can move the emails themselves. The directions are below.
Are you currently using POP for your other email programs or devices? If you are, I would recommend that you switch to the IMAP server. With Imap, you can have emails sent to specific Folders, say, in Outlook, that you create there, and set the email program to save copies of emails on the Comcast server.
Settings for IMAP are:
Server name: IMAP.comcast.net
Port 993 with SSL on
Outgoing Server remains: SMTP.comcast.net
Port remains 465 with SSL on
This server requires authentication must be checked too.
I strongly suggest that you save important email in an email program, not on the Comcast server.
Moving email from Comcast's webmail (aka Xfinify Connect) to your computer.
People want to do this for a variety of reasons, the main ones being to backup the email, or to get local copies prior to switching ISPs.
Notes
You have to do this with an email client (like Outlook Express, Outlook, Windows Mail, Thunderbird, etc.).
You can only do this via POP3, and POP3 can only download email that's in the webmail Inbox.
IMPORTANT The default behavior of almost all POP3 email clients is to delete messages after downloading them. If you want copies of your email to still be available via webmail you have to configure the email client to "leave messages on server".
Different email clients have different ways of storing email. Although it's generally possible to export/import the various formats from client to client, viewing the downloaded email conveniently will always require using an email client.
Setup
Empty out the Inboxes of both webmail (unless you're only interested in what's in the webmail Inbox) and the email client. Create Temp folders and move messages in the Inbox to the Temp folder if necessary.
Create folders in the email client that correspond to the webmail folders.
Email client config: port 995, SSL, Leave messages on server; detailed configuration steps for some common email clients can be found here: http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/E-Mail-Client-Settings-customer-generated/td-p/778889 . That doesn't address the "Leave messages on server" aspect. Best bet there is to Google on "'your email software' 'version number' + leave messages on server" (without the single or double quotes).
How to do it
Move a folder's worth of messages into the webmail Inbox.
Download via email client
Move messages in the client Inbox to the appropriate folder (should be as simple as CTRL-A > Move)
Move messages in the webmail Inbox back to where they were.
Move another folder's worth of messages into the webmail Inbox.
Etc.
CC

Outlook express email problem sending emails

Hello, I am afraid I am a novice with the new iPad I have just acquired but I have followed the instructions on connecting to the internet and setting up my email but everything works but although my email messages arrive I cannot send a message. I have checked the input and applied my mail.btconnect.com server details with my name and password on Port 25 but the mailboxes show my inbox only and no outbox? can anyone help. Thank you.

I really can't be of much help. Try the following links, they suggest that you remove your username and password from the outgoing server settings:
http://hintsforums.macworld.com/archive/index.php/t-52720.html
http://www.malcolmcoles.co.uk/blog/btconnect-pop3-smtp-email-settings-setup-appl e-macs/

Personal security/receiving email problems

Why am i not getting an email on how I can reset my personal security?

Try #2 below
From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:

Outlook stuck receiving email while owa works ok.

we have windows 2008 r2 domain controller, exchange 2013 installed on windows 2012 member server. Email is working fine. people move old personal folder email back to exchange after we switch cpanel to exchange server, then people have problem to open
outlook. receiving email never finish. owa is working very well. Iphone is ok, android phone has problem. Anybody know why? Thanks
gary zhou

Hi,
From your description, OWA works well, only Outlook and android phone can't receive emails normally. Then the configuration of Exchange server side is ok. I recommend you use Exchange online mode on Outlook to check the result. If Outlook works well using
Exchange online mode, you need to create a new profile.
If the issue persists, please use Outlook safe mode to determine whether the problem is caused by add-ins.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Having a problem receiving email with Outlook

Hello all:
Just installed a WRT54GS.
I am having a problem receiving email. Sometimes it comes through but most of the time I'm getting am error message 0X8004210A which is a timeout error. I can send email OK.
I have port forwarded 25 and 113 as well as trying to port trigger these.
Using Outlook for my email.
TIA
Message Edited by Segwin on 09-05-2006 04:45 AM

Sir,
Try to check on your outlook properties...
make sure you have to make sure that you have the correct incoming server..

Outlook - Receiving Email Problem

Similar Messages

Maybe you are looking for