Outlook's active view isn't working anymore

I can't preview an attachment anymore in Outlook using Firefox. It does work with Internet Explorer though. Just started having this problem the last couple of days.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.
I think that it is the <i>Stylish</i> add-on.

Similar Messages

I just updated my mac book air with the OSX and now my ethernet adapter isn't working anymore

I just updated my mac book air with the OSX and now my ethernet adapter isn't working anymore
Help!

Hi daisy_riggs,
To restore the Back button to your Safari Toolbar, you can go to the View menu and select Customize Toolbar. Drag the Back/Forward button to the actual toolbar. See this article -
Safari 6 (OS X Mountain Lion): Customize the Safari window
Thanks for using Apple Support Communities.
Best,
Brett L

My iPod's headphone jack isn't working anymore, when i put my headphones in , the left l, My iPod's headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

Hi Mr.Acevedo329!
I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
Specifically, you will want to take note of this section:
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top. The fading on and off light isn't working anymore either. Does anyone know anything about this?

I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right. The fading on and off light on area surrounding the screen isn't working anymore either. Has anyone else had similar problems? Any solutions? Thanks!

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Hi there, Wondering if you might know? I don't have enough space to update the new software on iPad. So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so. Will I lose the progress data/

Hi there,
Wondering if you might know? I don't have enough space to update the new software on iPad. So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so. Will I lose the progress data/levels in the games? But how do I back up the games data?
Please help. Scared to delete them to update and then not have the space to restore them and if I get them again will the levels/progress be gone?
Thanks Rachel

Connect your device to iTunes and do the update through iTunes. Using a computer takes much less space on your device than doing the update on your device.

I got creative suite 6 design standard and bridge isn´t working anymore.

i got creative suite 6 design standard and bridge isn´t working anymore.
it says I should delete the cache in order to get started but it always breaks down while doing it.
I tried to reinstall but also this didn´t work.
what can I do?

Without proper system information nobody can tell you anything specific. You can always delete the Bridge cache at the operating system level - it is, after all, merely a file/ folder.
Mylenium

My internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well

my internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well and took about 4 hours to finally be able to shut down and close everything. Does anyone know how to fix this? Im going into exams and need my internet to work
Thanks

I dont know if your allowed to show images here but if you are then these pictures will show you what happens.
This is what happens when I turn on my iMac (normal)
This is what happens a few seconds after I turn on my iMac
Here it is up close
Hopefully these pictures will help you understand what's been hapening on my iMac when I turn it on.
Thanks

X isn't working anymore since the last system update.

Hi there,
I'm using Arch for a couple of months and didn't need a forums login until now. But currently I've broken somehow my system and can't get it working anymore. So I need some help of you.
The Problem:
Arch Linux is running on my computer at work as a virtual machine inside VMWare Player 6.0.2-1744117. Host ist Win 8.1. After the system-update xorg didn't start anymore. Neither with kdm nor with plain X. When I start the X-Server (X as user or systemctl start kdm), the cursor of the tty console appears in the upper left corner, but isn't blinking. That's all. Only a black screen. It seems, X itself isn't starting. There's no process in ps and no graphics mode switch. In journalctl there's no (error) message.
What I've done:
Last week I made a system update, xorg-server was a part of it:
yaourt -Qi xorg-server
Name : xorg-server
Version : 1.15.1-1
Description : Xorg X server
Installed on : Do 12 Jun 2014 11:16:46 CEST
I've also updated xf86-video-vmware. xf86-video-vesa was last updated on 23th of January.
What happens (xf86-video-vesa)
/var/log/Xorg.log looks normal:
[ 43.168] (II) VESA(0): initializing int10
[ 43.168] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 43.169] (II) VESA(0): VESA BIOS detected
[ 43.169] (II) VESA(0): VESA VBE Version 2.0
[ 43.169] (II) VESA(0): VESA VBE Total Mem: 32768 kB
[ 43.169] (II) VESA(0): VESA VBE OEM: V M ware, Inc. VBE support 2.0
[ 43.169] (II) VESA(0): VESA VBE OEM Software Rev: 2.0
[ 43.169] (II) VESA(0): VESA VBE OEM Vendor: VMware, Inc
[ 43.169] (II) VESA(0): VESA VBE OEM Product: VMware virtual machine
[ 43.169] (II) VESA(0): VESA VBE OEM Product Rev: 2.0
[ 43.169] (II) VESA(0): virtual address = 0x7fa613360000,
physical address = 0xe8000000, size = 33554432
[ 43.173] (II) VESA(0): Setting up VESA Mode 0x148 (1856x1392)
[ 43.179] (==) VESA(0): Default visual is TrueColor
[ 43.184] (==) VESA(0): Backing store enabled
[ 43.185] (==) VESA(0): DPMS enabled
[ 43.185] (WW) VESA(0): Option "RenderAccel" is not used
[ 43.185] (==) RandR enabled
[ 43.889] (II) AIGLX: Loaded and initialized swrast
What happens (xf86-video-vmware)
Starting X gives me:
VMware: No 3D enabled (0, Success).
(EE)
(EE) Backtrace:
(EE) 0: X (xorg_backtrace+0x48) [0x584b08]
(EE) 1: X (0x400000+0x1887f9) [0x5887f9]
(EE) 2: /usr/lib/libpthread.so.0 (0x7f6befdc8000+0xf4b0) [0x7f6befdd74b0]
(EE) 3: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f6beb64e000+0x14848) [0x7f6beb662848]
(EE) 4: X (xf86DisableUnusedFunctions+0xa2) [0x4aa722]
(EE) 5: X (xf86SetDesiredModes+0x106) [0x4aae76]
(EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f6beb64e000+0xe8c0) [0x7f6beb65c8c0]
(EE) 7: X (0x400000+0xa7b9e) [0x4a7b9e]
(EE) 8: X (0x400000+0x39966) [0x439966]
(EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f6beea35000]
(EE) 10: X (0x400000+0x2507e) [0x42507e]
(EE)
(EE) Segmentation fault at address 0x8
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
Segmentation fault
I've tried a downgrade to xorg-server 1.5.0.5, but it didn't help.
I would prefer the vmware graphics driver, but temporary the vesa driver would do the job too. I can access the system via ssh from outside. Inside the VMWare after starting X I can't switch to the tty consoles anymore.
Any ideas?
Thanks so far.

I upgraded everything today including open-vm-tools-dkms and it still does not work.
MickeyKnox has the same problem: https://bbs.archlinux.org/viewtopic.php?id=182971
This is his codebin, same errors I have: http://codebin.org/view/53bcafc9
Could this be related to this report: https://bugs.archlinux.org/task/40781?
How could I install the version from the git?
[EDIT] I also tried downgrading mesa and mesa-libgl to Version 10.1.4-1 to no avail. (see bug report FS#40781 above)
[EDIT2] At least I can now use [ALT]+[F2] to log into the system without arch-chrooting from a live medium. So it hangs "less bad" ...
I also get the following error (as does MickeyKnox):
[ 42.709] (EE) Failed to convert pixmap to scanout.
[ 42.709] (EE)
[ 42.709] (EE) Backtrace:
[ 42.726] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x584b08]
[ 42.726] (EE) 1: /usr/bin/X (0x400000+0x1887f9) [0x5887f9]
[ 42.727] (EE) 2: /usr/lib/libpthread.so.0 (0x7f324d915000+0xf4b0) [0x7f324d9244b0]
[ 42.727] (EE) 3: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f324879b000+0x14848) [0x7f32487af848]
[ 42.727] (EE) 4: /usr/bin/X (xf86DisableUnusedFunctions+0xa2) [0x4aa722]
[ 42.727] (EE) 5: /usr/bin/X (xf86SetDesiredModes+0x106) [0x4aae76]
[ 42.727] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f324879b000+0xe8c0) [0x7f32487a98c0]
[ 42.727] (EE) 7: /usr/bin/X (0x400000+0xa7b9e) [0x4a7b9e]
[ 42.727] (EE) 8: /usr/bin/X (0x400000+0x39966) [0x439966]
[ 42.727] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f324c582000]
[ 42.727] (EE) 10: /usr/bin/X (0x400000+0x2507e) [0x42507e]
[ 42.727] (EE)
[ 42.727] (EE) Segmentation fault at address 0x8
[ 42.727] (EE)
Fatal server error:
[ 42.727] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 42.727] (EE)
[ 42.727] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 42.727] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 42.727] (EE)
Last edited by garunkel (2014-06-17 17:37:07)

Macbook Pro (Late 2011) Keyboard Light isn't working anymore.

I reinstalled Macintosh OS since then my keyboard lights stopped working.
I have tried :
1. I have tried pressing F5 , F6 keys but they don't even show the icon of light dim and high on screen it didn't worked .
2. I have tried every single option/shortcut in Preferences --> Keyboard pannel still didn't worked.
3. I have tried installing windows using virtual box still it doesn't even work on Windows.
4. I have tried create a guest user it didn't worked there as well.
5. I have tried deleting a file from Library -> Prefrences --> com.apple.iokit.AmbientLightSensor.plist still not working.
6. I have updated my Operating system to Mavericks still it isn't working.
Keyboard pannel in preferences looks like attached image, which has less options then other people's. anyone having any idea about how to resolve this issue?
Any application or anything which may resolve this issue please let me know
Please help.

Dear leroydouglas,
I have tried that as well, resetting the SMC. still it does not work

My Thunderbolt to HDMI connection isn't working anymore.

I've had my MacBook Pro for about a year now (2.4 GHz i5), and I've been using a Thunderbolt to HDMI adaptor to connect to my Sharp 32" LCD with no problems since I bought it...until this week when I updated all my software/OS. Now, I can connect, the displays prefs see the monitor, but all I get is black. No sound either...even though the sound prefs recognize the HDMI connection.
I know the problem isn't the cable. It used to work, and it still actually connects this same laptop to my projector...but it won't display on my TV anymore. I even get sound on my projector. It works like my TV used to. The problem started with the update, so I want to know what changed...and when Apple plans on fixing it. These are not cheap computers...I am kind of embarassed that I have to use my gf's $350 Acer to play Netflix on our TV when I have this multimedia monster gathering dust.
This problem is extremely frustrating, and I've been doing some research on it. It seems like quite the problem for a lot of people! There are multiple unresolved discussions on here about it (some of them over 40 pages long!) and I can't really believe Apple isn't dealing with this. It's been years now since this started happening, I guess.
We're mac users...we need multiple displays, and we need this stuff to keep working when we update! That's why we've made Apple into the richest corporation in the world. Step up superstars...fix this!
Again (just to be clear) I know the problem isn't the cable, so don't tell me to go get a different one, or that it's the issue. Me and my gf basically wore out Netflix with this very laptop and cable up until this week, and I've never had an issue with it..ever, until this update (to OS 10.7.5). Everything is in good shape, and if the laptop/computer is still feeding to my projector just fine...there's something else going on here, and I think a lot of people would love to know what it is. I am not the only person this is happening to, and it's been years since people have been begging Apple to fix this!
I hope that Apple looks into this and puts these discussions to rest. There are a lot of them! Do a search! The "More Like This" box on the right here is FULL of very similar UNRESOLVED discussions. This should be a priority. You've all made enough money off us...now make your stuff work like it's supposed to and close these threads!

No, I am a media professional who uses his MacBook Pro to connect to external monitors, and needs to continue to do so. I don't want Apple TV. I want my laptop to work again, like it's supposed to. Like it used to.
I have a demonstration this week at work that requires me to plug into an LCD screen and I am hoping to have this resolved by then. I am trying to convince my department to buy a Retina Mac and thousands of dollars worth of video software for live shows, and if I can't make it work, then I can't exactly convince them (or myself) to buy what I have been researching.
Again, I don't want wireless video or Apple TV. I don't want to buy any more stuff. I want to know why my Thunderbolt to HDMI cable stopped working after my update, and how to fix it...preferably before this meeting.

Activity window isn`t working

HEY
I have tried to download videos from Youtube, Putlocker and Facebook, trough the activity window,
but every time, i try to download the relevant video, it opens up in a new tab with only the video and
isn´t downloading it, like it usually do in the downloading window.
This really bugs me, because all the sites Youtube, putlocker (except for facebook) i tried before
and at that time it worked. I really hope you can help me!
(Mac OS X version 10.7.3)

Hi..
Might be corrupted preferences (.pllist)
Quit Safari.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Safari
Click Go
Move the Downloads.plist file from the Safari folder to the Trash.
Relaunch Safari to test.

Activation code doesn't work anymore

Hi! I've bought Quicktime Pro some years ago. Since then, I changed my computer and didn't need the software anymore. I nom need it, but my activation code is not accepted by Quicktime.
What can I do?
Best regards,
Patrick

The update was automatic. I don't need QT 7. Is it possible to dowload former versions of the software in order to have it work with this code?
Patrick

My home button on my iPod touch isn't working anymore... Help???

My home button does not work at all anymore. Any suggestions on how to fix it?

Has the iPad been dropped?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

After 7.3 update I get an error in outlook 2000 and it doesn't work anymore

I upgraded itunes 7.2 to 7.3 and now when I open outlook 2000 I get a microsoft error outlook has to close. Everything was working fine before the itunes & quicktime update? Everything points to the itunes update??? I do a system restore to before the update and everything works again??

First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
decision to download and update. Once you man up - think if you still under warranty. If that is not security
software according to the link provided, it is hardware. So second try another network, may be your network
has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
Unless your 3gs under warranty.

My Outlook Express email account isn't working any more in the Mail app.

In the Mail app, I'm getting a circle with a triangle and an exclamation mark inside it. I can't receive or send my from this (Outlook Express) account. It's a work email account, but it has been working fine until now. I clicked Rebuild from the app menu (trying to fix it!), but that only removed all existing emails in the mailbox.
Help!!

In mail, if you lick on window and Connection Doctor, what does it tell you about that connection? It may have a red dot next to the incoming and outgoing servers. If you click on the problem statement, it will take you where you need to go to fix it.

Outlook's active view isn't working anymore

Similar Messages

Maybe you are looking for