Outlook Safe Senders List GPO not working

Hi
I followed These instruction
https://social.technet.microsoft.com/Forums/office/en-US/c0714d7d-2a42-4b0f-9f1d-63234c7278a0/appending-outlook-safe-senders-list-via-gpo
but my Safe Senders List still not applied
Any ideas?
My Environment Office 2010,Exchange 2010, Windows 7x64

Hi Ben,
Please close Outlook and only use OWA (Outlook Web Access) to receive the messages from
[email protected] and check whether the messages are going to Junk E-mail folder or not. If it is listed in junk e-mail folder in OWA, it indicates the message is marked as Spam by Exchange server
instead of Outlook side.
If it is marked as Spam by Exchange server, please add this email address to the server safe sender list.
Create a domain or user-based safe sender or blocked sender list using transport rules
http://technet.microsoft.com/en-us/library/dn198251(v=exchg.150).aspx
Safe sender and blocked sender lists FAQ
http://technet.microsoft.com/en-us/library/dn133608(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Appending Outlook safe senders list via GPO

I am trying to append a known safe email address to my list of 'Safe Senders' in Outlook 2007 and 2010.
In our GPO I went into the ADM file for Office 2010, edited the Options > Preferences > Junk Email > Specify path to safe senders list
In there I put the UNC of our server which would be similar to \\comboi\home$\admin\SafeSenders.txt
But when I get my new policy, and then start Outlook the email address isn't added.......could it be a permission issue on the admin folder? What would it need to be set as?
Has anyone done this and maybe offer a direction to look in? Or if you know what it is, that would be great! :)
Thanks

Hi,
Here are the steps to publish a safe senders list through group policy. The first two steps are not required, but recommend for this solution.
1) Set expectations that even after implementing this policy, you cannot guarantee that the issue will never happen again.
2) Allow domain.com through any centralized spam filtering systems.
3) Create a .txt file that stores a list of safe senders (domains or addresses) each on a new line
4) Save the .txt file to a file share that is accessible by all clients. I put it on \\DC\Netlogon
5) Add the Office 2010 Administrative Template (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=64b837b6-0aa0-4c07-bc34-bec3990a7956&displaylang=en)
to group policy.
6) Create a new GPO for customizing Outlook or Office.
7) In the GPO go to User Configuration>Policies>Administrative Templates>Microsoft Office Outlook 2010> Options > Preferences > Junk Email
8) Open Specify path to Safe Senders list
9) Set this policy to enabled and specify that path to the .txt file you saved in step 4.
10) Now, here was the catch. This setting indeed tells Outlook where to locate the import file. It does not, however, tell Outlook to actually go import the file. This is done through a registry key. So in the same GPO navigate to User Configuration>Preferences>Windows
Settings>Registry
11) Right Click Registry and select New Registry Item.
12) Set the properties to the following:
Action: Update
Hive: HKEY_CURRENT_USER
Key Path:Software\Policies\Microsoft\Office\14.0\Outlook\Options\Mail
Value Name: JunkMailImportLists
Value Type: REG_DWORD
Value Data:1
Base: Decimal
Apply the group policy, and the next time GP is updated on the client and Outlook is restarted, the safe sender list will be imported.
Hope it helps.

Outlook Safe Senders list misses random emails.

Hi There,
I am experiencing a strange issue with the Outlook safe list in our environment.
We use a GPO to enforce a global Safe Senders list, and set a GPO to push out the required registry key to ensure that list is imported into users Outlook 2010 Client.
The problem we are experiencing is that email addresses specified in the safe senders list are occasionally being put in the Junk E-mail folder.
To reproduce the issue I set myself up with a subscription from our SharePoint server that emailed me a report every 15 minutes. The fromaddress was
[email protected] . This address is in the safe senders list as verified when I check in Outlook. Throughout the day 90% of these emails will arrive in my inbox. 10% will go into the Junk mailbox..
It's got me stumped, does anyone have any ideas?
We are using a singled Exchange 2010 server with Mail/Hub/CAS roles
Ben Taylor MCITP

Hi Ben,
Please close Outlook and only use OWA (Outlook Web Access) to receive the messages from
[email protected] and check whether the messages are going to Junk E-mail folder or not. If it is listed in junk e-mail folder in OWA, it indicates the message is marked as Spam by Exchange server
instead of Outlook side.
If it is marked as Spam by Exchange server, please add this email address to the server safe sender list.
Create a domain or user-based safe sender or blocked sender list using transport rules
http://technet.microsoft.com/en-us/library/dn198251(v=exchg.150).aspx
Safe sender and blocked sender lists FAQ
http://technet.microsoft.com/en-us/library/dn133608(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support

Safe senders list

we started to notice that our safe senders list was getting filled up, we would remove everything and then in a couple days we would see new ones getting added. Yes we do have company group policies that do add some but these are not those, and we do not
have the "add people I email to safe sender list" checked.
Any ideas?

The same ones keep showing as junk no matter how many time I click not junk. I also get a lot of email in the day so it is hard to check all of them. I was just hoping there was a easy way. I just don't want my contact list to get overloaded by added all of the email from stores and stuff.

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

How do you do anchors - the three ways listed did not work. I am using the jQuery mobile template 11. I want to link to a spot on the same page.

How do you do anchors - the three ways listed did not work. I am using the jQuery mobile template 11. I want to link to a spot on the same page.

How do you do anchors - the three ways listed did not work. I am using the jQuery mobile template 11.
You have aroused my curiousity, what are three ways listed that do not work? At risk of being labeled as an ignoramus, could you also tell me where to get the other 10 templates?
I usually give an element an ID and use that in my link as in
<a href="#mySpot">Go to my spot</a>
<div id="mySpot">
</div>

Firefox 3.6.3 does not save any history, does not save passwords. I have read the forum and checked my settings (ok), started in Safe mode (still does not work).

Firefox 3.6.3 does not save history, nor passwords. I have read the forum and checked my settings in Privacy (all ok), I restarted Firefox in Safe mode (it still does not remember history or passwords). Running on XP. I think these problems started when I upgraded to 3.6.3.

I had the same problem after an upgrade to 3.6.3.
I was using password manager for a number of web sites before. Not using cookies but password manager.
After 3.6.3 auto upgrade it did not work.
I could not enter private browsing mode.
When I looked in tools>options>security at my saved passwords the list was blank. The button in the saved passwords dialog that normally says "Show saved passwords" was actually blank (the button was there but there was no text on it).
I did have my old bookmarks and was able to create new ones but oddly the bookmark all tabs menu function wouldn't work.
I decided to reinstall firefox 3.6.3. There is no way something with that many bugs got out!
I was able to get the full firefox executable from http://mozilla.com
I closed all firefox windows and ran the installation.
After re-running the install and starting firefox everything was fine. It must have been a bad download or the original install got messed up somehow.
I hope you have the same good fortune I had!

Yahoo mail new style - My contact list will not work on FIREFOX anymore but does on IE

on Firefox 5 my contact list will not load and cannot be used
the address bar goes haywire if you make a mistake , making it difficult to amend or correct - ie. sends mail to draft's box - will it be fixed anytime soon or do i need to use IE for Yahoo Mail now they have cancelled old classic version that worked reasonably well on firefox

Me too, 23 July 2011. Can get YahooMail contacts in IE but not in Firefox. What is going on and who will fix it?

LOV single selection list is not working in my JDeveloper 10.1.2.3

Hi!
I'm stumped with this. I'm also new to JDeveloper. I used the sample tutorial from the OTN website entitled "JSPDataBoundLists.jws" to learn how to create drop-down lists in JDeveloper.
My problem is I created a single selection list LOV from DepartmentListView Data Control and pasted it into an EmployeesView Input form. This is so I can just select the Department names to populate the DepartmentID field in Employees table. I setup the data binding in the UI Model of my jsp using the "List Binding Editor". I checked the UIModel file and it looks as follows:
<DCControl
id="DepartmentId2"
SubType="DCListSingleSel"
IterBinding="EmployeesViewIterator"
DTClass="oracle.adf.dt.objects.JUDTCtrlListLOV"
ApplyValidation="false"
isDynamic="false"
ListOperMode="0"
ListIter="DepartmentsListViewIterator" >
<AttrNames>
<Item Value="DepartmentId" />
</AttrNames>
<ListAttrNames>
<Item Value="DepartmentId" />
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="DepartmentName" />
</ListDisplayAttrNames>
</DCControl>
I run the jsp, selected a value from the drop-down list, do a submit and do a commit, but the DepartmentId from the DepartmentsListView was not stored in Employees. What is wierd here is that there is an exact same single selection list defined a row above mine which is working fine. How come that one is working and mine is not?

Eureka! I finally found the answer to my own question!
This simple problem of adding a drop-down list into a jsp page cost me 3 whole days (around 24 full working hours) to find the answer. Normally it only takes me a few minutes with the other web app languages I've learned. And I just stumbled into the answer just a few minutes ago (maybe all thanks should be given to God whom let me stumble into the answer since me and my wife have been praying for several weeks now ever since I started trying to learn Oracle JDeveloper. It is really very very difficult and time consuming to learn compared to other web app languages and tools).
Anyway, the reason why my LOV does not work in my jsps using JDeveloper 10.1.2.3 is because JDeveloper 10.1.2.3 seems to allow only one input-form-element for the same field of the input table!
For example, what happened to me was I had an input form created for the Employees table in the HR schema. I did this simply by drag-and-drop from the "Data Control Palette". This feature I like very much with JDeveloper. It is really easy and works instantly. And then, I drag-and-drop the departmentname field from the Departments table as a "single selection list" into the jsp and setup its bindings. So when I run the jsp, viola! The drop-down list does not populate the DepartmentId field of the Employees table. IT DOES NOT WORK! I've tried reinstalling both JDev and Oracle db and JDKs to no avail! I tried posting in this forum to no avail! I tried experimenting with newly created jsps to no avail! Then suddenly after repeatedly experimenting on this on different tutorials, guides and my own web app, it works! Why did it work? It was because I tried to add an LOV-single-selection-list on another sample tutorial with a READ-ONLY FORM on the jsp! Thus only the LOV is the input-form-element in the jsp for the table's field.
So why can't you find such a simple and basic fact anywhere in the web, the tutorials, guides or the forum? I do not know. Maybe only I am using such an old version of JDev? But what about the users who used it when it just got out a couple of years ago? Didn't they have the same problem? Anyway, it seems like the answer to a lot of my simple basic questions about JDeveloper is not documented, or is buried very deep beneath all the other words of all these documents. Hopefully JDeveloper's documentations would get a lot easier to use very very soon!

Installing Flash Player 11.8.800.94 via GPO not working properly

Hello,
i've installed Flash Player 11.8.800.94 via GPO.
Installation works fine, but there is no flash player available in Firefox or Internet Explorer.
Deployed both Flash Players.
Tried to reinstall Flash Player 11.8.800.94 for Firefox, but it's still not active.
Windows 7, 64bit
Greetings,
Michael

Hello Comvel.
RE:
Hello,
i haven't fixed it yet.
I've deployed the last few version of flash player without any problems.
I haven't found any new things in the admin guide.
The plugins don't show up in both browsers. I can't enable them.
On the most importent clients, i've installed flash player manually.
I know it has been a few months since your post but, I was wonderingif you were able to find a solution for this that didn't involve manual installations. I've recently deployed 11.8.800.175 and am running into the same problems. Some work stations are just fine. But others, (both windows 7 and xp, all IE8) are not working. When navigating to a site like youtube, theres a banner that says update is needed. When you go to manage add-ons there is no shock object/add on.

Apple List Servers Not Working

The Apple list servers seem to be not working. Can someone at Apple please give update as to whether this is being resolved?
For example:
http://lists.apple.com/archives/webobjects-dev is definitely not working.
Also cocoa-dev list seems to have no archives since the turn of the year.
5 days later and the lists are still down. Anyone got any idea what is going on?
-Kieran

That link worked for me...
maybe a DNS issue somewhere, perhaps your ISP or LAN?
Jeff

Custom lock screen GPO not working for domain users

I have a WS2012 standard server with W8 Pro clients. I'm trying to force the lock screen to a .jpg however it's not working, it leaves the users with just a standard blueish screen.
I have the "force a specific default lock screen image" enabled with the path \\MRS-DC\WP\mrc_lock_screen.jpg
The GPO is being applied according to the results wizard, however no image. What gives?

Hi,
Please refer to the below articles:
Win8: How to Manage the Lock Screen Image on Windows 8 and Windows Server 2012
http://support.microsoft.com/kb/2787100
Here is a similar thread:
Change default logon/startup/lock screen in windows 8 pro
http://social.technet.microsoft.com/Forums/windows/en-US/2590f111-7709-40b9-acee-c2aeaa9a48f8/change-default-logonstartuplock-screen-in-windows-8-pro
In addition, please check your below policy:
Prevent changing lock screen image under Computer Configuration\Administrative Templates\Control Panel\Personalization
Disable it and check the result also.
Regards,
Yan Li
Cataleya Li
TechNet Community Support

The Downloads Clear List Button Not Working In Firefox 19.0

Hello,
After upgrading Firefox to version 19.0 today, I noticed that the Downloads Clear List Button does not work & is always grayed/greyed out, and so you can not clear all downloads; and so you have to remove them each one-at-a-time.
I did not have this problem until upgrading to version 19.0
Screenshot:
http://www.use.com/showoriginal.pl?set=1c0659d1946249dc69dc&p=1
Thank you,
-John Jr

I made a bug report:
https://bugzilla.mozilla.org/show_bug.cgi?id=845450

Outlook Safe Senders List GPO not working

Similar Messages

Maybe you are looking for