Outlook send issues with Linksys router

I am on my brother's Linksys router with my own laptop. I can't send email from Outlook 2007, but I can receive it. Any ideas?

Make sure that under Outlook send receive settings ..... the Outgoing Mail Server ... should be in the form of .... mail.Domainname.xyz .... the same as in Incoming Mail Server ....
Click on More Settings and select the Outgoing Server Tab....
Check My outgoing server (SMTP) requires authentication......
Use same settings as my incoming mail server.....
Click Ok. Click Next. Click Finish
See if the Outgoing Mail is working or not ....

Similar Messages

Issue with Linksys Router and Modem with Vonage Device

Hello,
I have a Linksys Router and Cable Modem. Plus I have Vonage for my home phone. I have been having several problems and now, my Vonage phone will not work at all. I have cable internet and my ISP is Cox Commuication. I do not know how to connect my Vonage device with my Router and Modem. People have been giving me advice, but nothing has worked.
Does anyone know how to intergrate all three of these items together? Basically which plug goes where. Currently my phone is not working. The only thing that is in use right now is my linksys cable modem. I have the power cord plugged in, the blue cord from the modem plugged into my laptop, and the cable from the modem to the wall jack. Please help. Thank-You!
Linksys Router: WRT54G version 6
Linksys Cable Modem: BEFCMU10
Vonage (Motorola): VT2143-VD
Message Edited by preshe79 on 03-16-2008 03:56 PM
Message Edited by preshe79 on 03-16-2008 03:58 PM

The router should be online first. Can you get into the router's configuration page?
The box said windows xp or better... So I installed Linux!

Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

Hi all,
we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
Exchange Server.
We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
Timestamp Sender Recipients MessageSubject
25.02.2015 16:48:52 [email protected].. {}
25.02.2015 17:04:43 [email protected].. {}
25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
25.02.2015 17:13:45 [email protected].. {}
25.02.2015 17:13:55 [email protected].. {}
We can still reproduce the issue on different Mac computers.
Thanks for any help in advance!
Thanks and best regards
Reto

Here is the mailheader form the successfully sent email:
Date: Wed, 25 Feb 2015 17:08:25 +0100
Subject: test 3
From: sender <[email protected]>
To: "'[email protected]'" <[email protected]>
This mailheader is from an email which was not sent out:
User-Agent: Microsoft-MacOutlook/15.6.0.150113
Date: Wed, 25 Feb 2015 16:48:52 +0100
Subject: test 1
From: sender <[email protected]>
To: [email protected] <[email protected]>
Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

Comcast Cable Modem - Motorola SB5120 with Linksys Router issues

Anyone have the comcast typical inet setup with the SB5120, I also use the LinkSys WRT55AG but only hardwired...
I can't get inet access, I've tried numerous suggestions...
When most folks said to clone the MAC addy, when you check the tab in the routers config, does it update itself or do you have to physically enter it.
Message Edited by Tony1969 on 03-05-2010 09:27 AM

On your Router setup page click on the Sub tab "MAC Add Clone" and below check the box "Enable" and below click on "Clone My PC's MAC" and click on Save Settings..... It will automatically update the MAC add of your Computer on the Router.
Once you done with this settings you need to unplug the power from the Router and Modem, wait for 30sec and then first plug the power to the Modem and once all the lights are lid, then you can plug the power to the Linksys Router.
Now check if you are able to go online.

Time Capsule slow internet with Linksys router

I has issues with slow internet page loads. I have a Linksys WAG325N router connect to Telstra ADSL 2 with a Time Capsule. I use two wireless network one broadcasted from Linksys and the other wireless network from the Time Capsule. When i'm connected to the time capsule i had slow internet page loads and the Time Machine backups fail.
When connected to the wireless network from the Time Capsule i get 10% to 30% packet loss when i pinged the Linksys router and 0% packet loss when i pinged the Time Capsule.
I then connected to the Linksys router then i has packet loss with i pinged the Time Capsule and 0% loss when i pinged the Linksys.
I used the Airport Utility and changed the "Ethernet WAN Port" from automatic to "10 Mbps/Full Duplex".
This seem to fix the problem. I think there is some issue with the port speed negotiation between the Linksys and Time Capsule.
Time Capsule 7.4.2
LinkSys V1.00.13(01)

The same thing is happening to me, exactly. Although my top speed is lower than yours (I'm on FiOS). Unplug it for a second, and you're back to normal. Otherwise, it will slowly and inexorably degrade until you have something worse than dial-up.
This is completely unacceptable, and it's far too typical of the current state of Apple's quality control and support that there is no official acknowledgment of this screamingly obvious and annoying problem, which happens every single time I use my Time Capsule, which is to say every day, and no recommended fix.
Sometimes I feel as if I could really hate this company!

Compatibility OS X Lion with Linksys router E4200

Do OS X Lion is now compatiable with Cisco router Linksys E4200 which I use now with OS X Snow Leopard and I like upgrade to Lion.

You can use it without a problem, and you can edit the settings by going to http://192.168.1.1 or 192.168.1.254.
I haven't seen any issues with the E series from Cisco

Trying to set up Time Capsule for WiFi access with Linksys router

Problem: I must use a Linksys router to connect to internet, since I have my telephone connected to this router (Vonage). I have set up a Time Capsule and connected it to the Linksys router, which is NOT wireless. I would like to use the wireless capability of the Time Capsule to provide wifi connection for laptop computers. The Time Capsule's wireless network is visible to these computers, but they do not connect to the network, since the Time Capsule is not the source of dynamic IP addresses; rather, the Linksys router is the source for IP addresses on my network. What must I do to get IP addresses supplied to computers attached via wifi?

The Time Capsule was set up using bridge mode. My initial error was to use the WAN port. After switching to a LAN port to connect with the Linksys router, the laptop computer was able to connect to the network wirelessly, but it could not obtain web page from the internet.
The laptop is a Dell Inspiron 6000; with an ethernet cable attached to the Time Capsule, it receives an IP address AND it can obtain web pages from the internet. The command "ipconfig /all" issued at the DOS prompt yields approximately the following:
Broadcom... (this is the ethernet card) ... IP address 192.168.15.104, with the gateway 192.168.15.1 (which is the Linksys router)
Intel(R) PRO/Wireless... (this is the wireless card) ... IP address 192.168.15.103, with the same gateway.
I can ping the iMac from the Dell laptop; the iMac is connected directly to the Linksys router. Running ping 192.168.15.104 from Terminal on the iMac succeeds, while ping 192.168.15.103 does not.

Outlook 2010 issue with .pub attachments and read-only

Hello,
Just starting this week per users they can't open a .pub(publisher) document from Outlook 2010, then edit the document click save or click the send to email button without being prompted to save the file to their my doc's or some where. Tested
it out and get the same error. I can click forward, then click on the publisher attachment, then edit and save or click the X to close the document and the attached document includes the changes. Then I can email out. So it works that way
but not the way they did it before.
Also we did install updates last week so could be an recent update that is causing the issue.
Appreciate any idea's or suggestions.
Thanks,
Nathan

Workstations are on a domain
Also it may appear to be more of a issue with 2000 .pub type of files. As users can create a 2010 .pub file and it works great fine. But every time a user opens a 2000 .pub file via outlook and tries to edit and save it requests the
user to do a save as, vs. save to outlook temp location.

Sending issue with Mac Mail

I use Mac Mail for all my accounts and I am having an annoying issue with my Yahoo Mail. About 75% of the time, it sends right when I hit send, but then 25% of the time, the send icon just has the spinning wheel and nothing goes through and I don't see the outgoing bar in the bottom left. Eventually, I get an error message that it didn't send and if I hit Try Later, it usually sends. If I shut down Mail and re-start it, the messages in the Outbox then send right away.
My settings are all correct as it does send most of the time before getting hung up.
Has anyone else experienced this? Is there anything i can do besides switching to Outlook or Entourage? I don't want to do that as I have read MobileMe does not work with Outlook.
Thanks for any help,
SJ

I have the same problem. Around one time in five the gear will spin, no blue progress bar shows, nothing shows up in the Outbox or Sent box. My solution is to quit Mail and relaunch it immediately. Now any of the following may happen:
1) It may show in the Sent box, having actually been sent successfully (this is rare).
2) It will show in the Outbox and Mail tries to send it automatically, in which case it may or may not go normally; if not I have to go thru the quit/boot cycle again.
3) It will show in the Outbox and I have to send it again manually, in which case it will probably go normally; if not I have to go thru the quit/boot cycle again.
At least it won't be lost.
It is not my account settings. It is intermittent. I think it started after I upgraded to 10.6.7 (I can't remember if that is when I got Mail 4.5)
This is clearly a bug and I wish Apple would fix it.

Problem with Linksys Router Model WRT110 Not Assigning IPs With DHCP?

Hello,
I recently purchased this router (WRT110) to take the place of my old Belkin that was continually dropping connections (which was a real pain when trying to download stuff off the Internet).
However, I cannot get this router to assign IPs to wired or wireless computers. I spent around 2 hours talking to Linksys support technicians (two total) before they finally told me the router was defective.
So, I went back to the store and got an exchange. But, it's the same story with this router, the connections can't get past the "acquiring network address" stage in the connection process.
I would like to think that this has more to do with my ISP than the router, but if I set up a static IP on the wired computer I can connect to the Internet and the router through its default gateway. Setting up a static IP on the wireless computer doesn't seem to work, however. If the ISP was a problem, wouldn't the router not detect the Internet connection at all?
DHCP is definitely enabled on the router also.
My ISP is a small town owned company. I have a wireless broadband connection, which works similarly to satellite, only the connection is broadcast via a tower and is received with an outside antenna.
I still need to contact them about this, but I figured it could hurt to ask here and see some of your suggestions.
Thank you!
~RJG

UPDATE: I contacted my ISP today and the technician I spoke with said he didn't know of any problems any routers would have with their wireless broadband. I tend to agree with him, as I've configured two routers previously using my connection and I've never had any difficulty until now. He suggested changing the ethernet cable and releasing/renewing my IP address, both of which I did but I continued to have the same issues.
But, after doing some more research I found some settings that actually allowed my wireless computer to connect. There was a post in these forums referring to modifying the MTU, changing it from Auto to Manual and changing the value to 1458 actually seemed to work, as well as strengthening the connection by changing the beacon interval. Anyway, I can connect wirelessly now.
Also, I connected my Linux computer (Ubuntu 8.04 Hardy Heron) to the router and was able to connect instantly, no problems whatsoever. So, out of my three computers, two are connecting, but my wired Windows computer is still having issues. However, if I set a static IP for that computer, I can connect fine.
I'm thinking maybe there is something wrong with the NIC card in that computer, but how would one test something like that?
It doesn't make sense to me, I would really appreciate any input. Thank you!

IPhone 4S - Wi-Fi Speed issues with Linksys 4500

I have a Linksys 4500 and have extremely slow wifi speeds. I've changed every setting, channel and anything else that was editable. However, I can never get very good download speeds (typically below 1Mbs) but the strange thing is that uploads are usually around 5Mbs. I finally tried a Ruckus 7363 AP and I consistently get close to 20Mbs so I know it is the wi-fi with the linksys router. Has anyone else had the same experience and did you find a fix? Again, I've tried everything and the problem only appears on ios devices. Macbook has no issues nor does my android devices. thanks

I'm having the same issue. My old iPhone 4 and the iPad 2 both connect seamlessly to iTunes (on WIndows 7), but the iPhone 4S doesn't sync automatically when plugged in to power. Also it doesn't maintain a connection to iTunes over wifi. For instance, right now iTunes isn't showing the iPhone 4S (but is showing the iPhone 4 and iPad 2) even though the iPhone 4S is on the same network, and is even connected to power.
When I try to sync from iTunes (when the phone shows up) or from the iPhone 4S, it fails saying that it failed to start the sync process.
Since the process works with the iPhone 4 and iPad 2, I'm assuming there must be some issue with the 4S, or another setting somewhere that isn't completely obvious.
Any assistance is greatly appreciated.

Need Help with Linksys router broadband-b

I have a Linksys wireless-B broadband router for some reason it just went crazy on me. My wireless card is a wireless - G . Now when i had Verizon DSL i got this router and a USB wireless adaptor from verizon. I had the usb adaptor on my wife computer and the router and modem on my notebook for six months we had there dsl service until we moved to a nother city. Once we had all of our service's transfered to the new home we could not get verizon DSL there.
So for a nother six months we had to use dial up and being that we run a home business dial up was just not up to the task. Well we got rid of dish network just to get cable T.V. just to get the cable broadband service. That's when i got a wireless card for my notebook anyway for six months the network was working just fine with the router and my wireless card.
Until Sept this year just a few weeks ago the router started going crazy. Before my note book was config for windows to connect linksys was connecting and i would see all conection in the site survey, and my own network also. Until a few weeks a go my network would not show .
So i call linksys the have me download some up dated firmware that would not install on my notebook or my wife computer after being on the phone for hours with linksys they come to tell me that the router is ok and working alright after all the test and steps they took me through with the router. Linksys tells me that there is something wrong with my PCM slot on my notebook or either my linksys wireless card. Ok First of all i can pick up signal on other networks and go on line like the Hilton Hotel when i go in there parking lot, Second i can pick up othr networks and get on line that are not secured sometimes so this tells me that there is Nothing wrong with my PCMI slot or the wireless card.
Now i took my router across the street to a friend house and guess what he gets a signal off the router with his notebook but i can not and when we plug the router in the AC outlet the internet light was flashing like crazy and my wireless card was not even in my notebook so that tells me that someone close was pulling signal off my router but i cant.
Can someone please explain this to me i want to get another router wireless - G this time but if there is something that can be done to get this one working like it should that would really help.
The Notebook has been checked out and config and that works well when i hook the either net plug in from the modem the router was config as well but i just can't get a connected to the router when i use the wireless card.

Yes press and hold the reset button in back for 30 seconds and release. Wait 10 seconds and power cycle the router. Now connect to 192.168.1.1 username blank, password 'admin'. Now try.

Issues with second router disconnecting and reconnecting

My second wireless router keeps disconnecting... it reboots then becomes availble after a minute.
The second wireless router is a Netgear WNDR3400v2 and is connected to a Actiontec MI424WR via an ethernet wire. I changed the settings as noted in a forum post to hook up a second router... the setting changes fixed the issues with IP address conflicts that I was having. The issue is that the Netgear router keeps disconnecting. The Actiontec router never disconnects.
There are 16 devices connected to the internet.
Parts of my house don't get a signal from the Actiontec router.
Please let me know if you have any suggestions on enabling more wireless coverage throughout my house from my Actiontec router and/or how to stop the Netgear router from disconnecting. I can't find any specific information that isn't confusing.
My Actiontec router is on the main floor in a cabinet, which prevents the signal from reaching to parts of the house... there is an ethernet cable that runs from the cabinet to a room upstairs, which is where the Netgear router is located... that signal reaches most of the house.

Hi Clueless777,
Most likely if your Netgear router is randomly disconnecting but the Actiontec is not, it's going to be an issue with your settings in the router. There is a post over at http://www.dslreports.com/faq/12506 that will tell you exactly how the settings should be in both routers for this to work properly.
As to increasing the signal from the Actiontec router, a couple of things come to mind but you may have already did these things. First, make sure to change the wireless channel in the Actiontec to something like 8. Also, make sure that no cordless phones are located nearby the Actiontec router as much as you can. We mention this because many cordless phones operate in the 2.4ghz range which is the range of most WiFi routers and devices. You could also look into getting a range extender but I wouldn't recommend it because your Netgear router is essentially doing the same function without sacrificing service. Other than these suggestions, take a look at the link above and make sure your settings match. That should help you out more so than changing the channel in the Actiontec router and/or relocating cordless phones.
We hope that this helps.
CJ

Using Airport Extreme with Linksys Router/Modem

I was just told that my Mac mini is excruiatingly slow on the internet because I am using a Linksys router with Xfinity and that Airport Extreme will be much faster. And that I should plug Airport Extreme into the modem. When I checked, I don't have a separate modem. My Linksys is a combined router/modem. What should I do? Do I plug the Airport Extreme into the Linksys box, or do I get a completely different modem that is only a modem? And, if I plug Airport Extreme into the Linksys box, how do I configure the network for Airport Extreme, and what else do I need to do? All help greatlly appreciated...I can barely get onto the Apple website!

When I signed up with Xfinity one of the stipulations was that they would not install a router/modem but only a modem. I had heard of problems with their router/modem and I didn't want to go down that path.
I don't but you mighht be able to get them to change out your router/modem for a modem. I would start there by asking them.
Allan

Outlook performance issues with mountain lion

I have latest updates for Mountain Lion (10.8.2) and Outlook (14.2.5). I continue to have outlook performance issues where the ball just spins and rules aren't working as before. I tried disk doctor and still have same problem.s My MAC is less than a year old with 8 gig of memory. Some performance issues with fusion and safari too but nothing like outlook.

I am not sure if this is still an issue but I wanted to share that it has been resolved. Here is how to do it
https://discussions.apple.com/thread/4197578?start=30&tstart=0

Outlook send issues with Linksys router

Similar Messages

Maybe you are looking for