Outlook won't send messages

my outlook 2007 suddenly won't send emails. I can receive them just fine but get an error message saying:
Task  Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
HELP!!!!!

Hi,
Please first check if you can send email from web mail. If problem continues in web mail, you'll need to contact your ISP to get further assistance.
If it works as expected in web mail, it means the problem is related to Outlook side. In this situation, please make sure your SMTP settings is set correctly. See:
http://support.microsoft.com/kb/287532
If you installed any antivirus software, please try to temporarily turn off them and test again.
Besides, this issue may be caused by some other reasons, please refer to the following KB article for more details:
http://support.microsoft.com/kb/813514
Hope this helps.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • Why won't my iPad won't send messages?

    My iPad2 won't send message to person I just received from.  The send button is blue but not active. When I try to send to send a new message to another person their name is red marked with ! and the send button is gray. It won't accept any new name - alwayas in red with !.

    Figured it out. The iPad message box has two lines. The first says "Subject" in gray. If you type something into the "Subject" line, but don't type anything on the next line (which is for the message), the send button remains inactive. Try typing the message on the second line. Send button then becomes active.
    Now why couldn't Apple tell us that?

  • My I phone 4 won't send messages

    Hi I have an iPhone 4 on iOS 6 and my carrier is Verizon, I'm having trouble with sending messages. For some reason it won't send messages , I also have a keyboard case thats bluetooth if it matters. It's starting to become really frustrating.

    Settings > Messages > MMS messaging > ON??
    If yes, contact your carrier.

  • Outlook won't send since installing icloud

    I need to send items via outlook then open them to add other recipients but after doing this they won't send. how can I fix this?

    Hi,
    Please check storage quotas for your mailbox by the following steps.
    In the console tree, navigate to Recipient Configuration >
    Mailbox.
    In the result pane, select your mailbox.
    In the action pane, under the mailbox user's name, click Properties.
    In Properties, click the Mailbox Settings tab.
    Click Storage Quotas, and then click Properties.
    In Storage Quotas, please increase the limit of
    Issue warning, Prohibit send and Prohibit send and receive,
    the value range is from 0 through 2GB. If the
    Use mailbox database defaults check box has been chosen, then we should configure the quotas for the Mailbox Database.
    Here are steps to configure the quotes for Mailbox Database.
    In the console tree, navigate to Organization Configuration > Mailbox.
    In the result pane, on the Database Management tab, select the database you want to configure.
    In the action pane, under the database name, click Properties.
    Use the Limits tab to specify the storage limits, the warning message interval, and the deletion settings for a mailbox database.
    Please increase the limit of Issue warning,
    Prohibit send and Prohibit send and receive, the value range is from 0 through 2TB.
    Click OK to close windows and apply the changes.
    If this issue persists, please let me know.

  • Outlook won't send for any of us....says cannot send themessage user has exceeded

    outlook keeps popping up the password box.....it won't send mail....says smtpout.secureserver.net  says send test email message: cannot send themessage...verify the email address in your account properties...the server responded 550 jwilson@.     
    has exceeded their send quota

    Hi,
    Please check storage quotas for your mailbox by the following steps.
    In the console tree, navigate to Recipient Configuration >
    Mailbox.
    In the result pane, select your mailbox.
    In the action pane, under the mailbox user's name, click Properties.
    In Properties, click the Mailbox Settings tab.
    Click Storage Quotas, and then click Properties.
    In Storage Quotas, please increase the limit of
    Issue warning, Prohibit send and Prohibit send and receive,
    the value range is from 0 through 2GB. If the
    Use mailbox database defaults check box has been chosen, then we should configure the quotas for the Mailbox Database.
    Here are steps to configure the quotes for Mailbox Database.
    In the console tree, navigate to Organization Configuration > Mailbox.
    In the result pane, on the Database Management tab, select the database you want to configure.
    In the action pane, under the database name, click Properties.
    Use the Limits tab to specify the storage limits, the warning message interval, and the deletion settings for a mailbox database.
    Please increase the limit of Issue warning,
    Prohibit send and Prohibit send and receive, the value range is from 0 through 2TB.
    Click OK to close windows and apply the changes.
    If this issue persists, please let me know.

  • My Apple ID won't send messages to other people through my ipad

    I had changed the email for my Apple ID and ever since I've done that every time I send a message to someone through Imessage on my iPad It won't deliver

    Good afternoon Maemz,
    If you are having an issue with sending messages from your iPad, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Messages - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My 5s iphone won't send messages

    My 5s iphone won't send messages

    Hi Laura2282,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like the iPhone is not sending messages. I would recommend that you read this article, it may be able to help the issue.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    Mario

  • Mail app won't send messages out

    I am logged into gmail on my iPhone 4 mail app. I tried to reply to a message yesterday and it wouldn't work. The message sat in my outbox saying "unsent" because I needed to go to my mail account settings and enter a password. Well I went to settings, mail, account, and my password was stored there. I re-typed it anyway to see what would happen. I went back to the mail app, and the message still has not sent. But now I don't have an Outbox folder on the main page either! The only way I know it's still unsent is because when the app refreshes, it says 1 Unsent Message on the bottom of the screen.
    So my question is, what is going on, where did my outbox go, why did it tell me to enter a password, and most importantly, why won't my message send?!
    I was connected to wifi, if that makes a difference. And does it make a difference if it was a reply versus a new message? I just tried a test email, connected through 3G, and it says it sent.

    Something stuck in the cache? Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt).

  • Messages on my MacBook Air won't send messages over iMessage. Anyone know how to fix this?

    In preferences, under accounts, it claims that my Apple iD is hooked up to messages, including my phone number and email address...yet it isn't sending messages they always fail. Does anyone know how to fix this problem? It would be a great help.

    Read this whole message before doing anything.
    Back up all data.
    Quit Messages if it’s running.
    Step 1
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Move the following items from the Library folder to the Trash (either may not exist):
    Caches/com.apple.Messages
    Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
    Leave the Library folder open. Log out and log back in. Try Messages again. If it works now, stop here. Close the Library folder.
    Step 2
    If you still have problems, quit Messages again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
    Messages
    Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
    Test. If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
    Step 3
    In the Preferences subfolder, there may be several files having names that begin with "com.apple.iChat". Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
    Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
    Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
    If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
    If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

  • Nokia 6120 won't send messages

    I've had my 6120 for about 3 months now. Been working fine for the whole time until today when i tried to send a message. Was stuck in my outbox for a while until is comes up with and error, something like:
    'General Error: Memory Full; close applications and try again'
    I've tried everything i can think of but nothing seems to be working to fix this problem. I can make calls and recieve message fine; but no sending message which is what i mainly use the phone for.
    Any help or guidance would be greatly appreciated!
    Cheers

    Try clearing your log out, and set it to record for a shorter time.
    iPhone 5 32GB
    MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

  • 6120 won't send message - please help!

    I've had my 6120 for about 3 months now. Been working fine for the whole time until today when i tried to send a message. Was stuck in my outbox for a while until is comes up with and error, something like:
    'General Error: Memory Full; close applications and try again'
    I've tried everything i can think of but nothing seems to be working to fix this problem. I can make calls and recieve message fine; but no sending message which is what i mainly use the phone for.
    Any help or guidance would be greatly appreciated!
    Cheers

    I've tried everything i can think of
    such as????
    Would that include deleting old messages, clearing logs and removing large music files/images and all the things you have done in 3 months. I am not saying remove them all but a little housekeeping may release some memory. Worth a try perhaps.
    I would love to know what you have tried
    6120c (3uk) and 6300 (Orange), LD-3W

  • Won't send messages

    Suddenly my 750i has stopped sending messages...well, it shows they are sent, but no one is receiving them. There is one message which wasn't received which refuses to be deleted. Please help.

    I think the problem with messages not being received is probably a problem with your network rather than being a fault with the phone.

  • Email outbox won't send messages??

    Not sure what is up but there is some sort of a "connection" error when I send an email from my Droid phone and it won't send the emails?

    The settings to send mail from your phone is different than from your home PC. Who is your ISP?

  • 6085 won't send messages

    This phone had been working great for a couple of years and I stopped using it for a while.  And because I hadn't used it, I had to get a new sim card. After I put the new sim card in, everything works except sending messages.  I get this error msg: "content not supported."  Any ideas?  thx

    First ensure you have the correct message center number,next try free up your message folders and last try a factory reset type in *#7780# if asked for code its 12345
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • IPhone won't send messages only to other iphnes

    I have turned the SMS button on but still can only send messages to other iPhone users

    When I was on orange I had to contact their customer service center and they had to unlock the ability for me to contact internationally. I suggest you contact orange customer service.

Maybe you are looking for

  • How to single sign off from all integrated forms with application server

    Hi! I deployed two forms form1 and form 2 on oracle application server 10g. The i created user in oid and created two data sources for these two forms to have data from database . I enabled single sign on on the formsweb.cfg file ,Now single sign on

  • How to add languages to the "Correspondence language" in People form

    Hi, Can anyone help me how we can add languages to the "Correspondence language" Navigation will be as follows People form > Other tab Thanks

  • Discolored panel

    im sure this issue isnt unique, but i cant seem to find the thread so ill just have to ask. how would one go about cleaning the gray panelling on the inside of the macbook, namely the area around the trackpad that seems to get darker spots after lots

  • Dblink to SqlServer using more than one user...

    Hi All, I'm in a migration project, SqlServer to Oracle. I'm using the Transparent Gateway to connect from Oracle to SqlServer, using the database link process. When I created the dblink I used the SA (SqlServer sysdba user), and in the future tests

  • Replication of user Id and Passwords Across Servers

    I am in the process of replicating our production application server to a Disaster Recovery site server. I am using Goldengate Software as the tool for bi-directional replication. What Application Express tables do I need to replicate to the support