Outlook,Word and Excel 2010 slow on first open

I have a 3x users on my Lan with these issues. Windows 7 Pro (32bit) and Office 2010 (32bit) Quadcore 2.6Ghz 2GB Memory Exchange 2003 Cached/non-Cached mode Roaming Profiles When attachments (doc,docx,rtf,pdf,xls,xlsx) are opened from Outlook,Outlook tries
to open document, and displays orange loading line in the middle of screen. After about +30sec the document opens up, if you reopen document again immediately after opening the first time, its instantly open. Excel and Word files does not always open on first
attempt from PC or LAN, but does on second attempt. When opening files from within Word/Excel directly, it seems to be instant. Excel files sometimes open with this error "There was a problem sending command to the programme " then opens blank Excel2010. Things
we have tried: - Repair Office 2010 , no change - Uninstall restart and reinstall Office 2010 , no change - Install SP1 for Office 2010, no change - Swapped Workstation on 1 user, no change - Clear Outlook Cache - Start Outlook as Safemode - Disable DDE -
Moved/Renamed Roaming Profile folder on server, then had workstation recreate Profile I have had no luck

Hi
When you open attachment in Outlook, it will leave a copy to subdirectory under the “Temporary Internet Files” directory, you can empty
the subdirectory and restart outlook.
1.
Click Start, click All Programs, click Accessories, and then click Run.
2.
In the Run dialog box, type the following command (including the quotation marks), and then click OK.
"C:\Users\ username \AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook"
3.
Open the subfolder under the Content.Outlook folder whose folder name is a randomly generated sequence of letters and numbers. For example, FW0B6RID.
Note There may be more than one subfolder with a randomly generated
name under the Content.Outlook folder.
You need check following registry key make sure the value exists, and if the value contains a valid path
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
Data Type: REG_SZ
Best regards
William Zhou CHN
TechNet Community Support

Similar Messages

Unable to save MS Word and Excel 2010 and 2013 onto the network share

Hi,
I have read similar cases, but did not work out on the problems we face.
We are using Office 2010 and Windows 7 and it seems like only this combination will encounter saving problem on the networe share (but local / removable disks are fine) -
Other combinations:
Windows XP and Office 2010 - no problem
Windows XP and Office 2003 - no problem
Windows 7 and Office 2003 - no problem
In Microsoft Word 2010, when saving a new document, it will save but create a 0KB file in the network share drive and I notice the blue menu bar of the Microsoft Word 2010 still displays "Document1" instead the new file name.
And only when I click save icon or exit button, Word actually prompts another "Save As" dialog to save the file, and as a result, I have to save the same file and answer MS Word prompt to replace the existing file - and this is the real time that
the document and its contents really got saved. And the blue menu bar then displays the actual file name.
In Microsoft Excel 2010 (also Powerpoint I suppose so), in saving a new excel file, after typing in a file name for the new file in the network share location, it will prompt a dialog box indicating the "File is currently in use"
Similar to MS Word, it will still create a 0KB file in the network share, and only a second time saving and replace the 0KB file, is able to save the file again.
I have tried a lot of ways from Safe Mode, Disable Add-in, Added Trusted Locations to the network share in MS Word and Excel, Uninstall Antivirus software, redo NTFS permission on the network share server folder, etc but the problem cannot
be solved.
Any help is appreciated. Thank you in advance.
Kind regards,
Daryl

Thank you Max.
I have tried various storage configurations and share the folders out in Windows Servers and grant user accesses with AD.
These drives configuration involves iSCSI drives, using NAS drive, using internal SAS RAID drives in Windows 2008 servers, all having the same errors, but the latter one was having the most errors almost every first time the users
save their files (includes saving from email attachments), the files will get 0KB.
I have tested LAN cables, switch LAN points in panels and switches, and comes to no avail.
I have patched with the latest office updates (the latest being Office 2010 SP2) also to no avail.

Word and Excel 2010 keep asking me to log into SharePoint.

I had Office 2010 beta running on Windows 7. At one point, I opened a file from a SharePoint site by mistake. I got the Beta to stop asking me about logging
into this SharePoint site.
Last week, I un-installed the beta and installed the released version of Office 2010.
Now, when I have any documents opened in either Word or Excel, I am being asked to log into the old SharePoint site - every 5 minutes.
The only place I have been able to find anything related to SharePoint is under Outlook, file, info, account settings. The old site was listed under SharePoint
lists - I deleted that. There was also a Data File that had the SharePoint site as the location - I deleted that.
Word and Excel are still asking me to authenticate to the SharePoint site - I don't use any SharePoint sites.
HOW DO I MAKE IT STOP?
Thanks!

Hi,
Thank you for using
Office 2010 Setup and Deployment forum.
From your description, I understand that you had Office 2010 beta and opened a file from a
SharePoint site by mistake. Then you set Office 2010 beta stop asking for log in in this SharePoint site. Now you installed the RTM version of Office 2010. However, when you open any documents in Word or Excel, you are asked to log in the old SharePoint site.
If there is any misunderstanding, please feel free to let me know.
If SharePoint Shared Workspace is enabled in Word or Excel, this may prompt users with a Windows login if users do not have permissions to access or create a Shared
Workspace. We can do the following steps to turn this off:
===============
1.
Open
Word
2.
Click
Files > Options > Advanced
3.
Under
General, click Service Option.
4.
Click
Shared Workspace.
5.
Uncheck box that says
“The document is part of a Workspace or SharePoint Site.”
6.
Click
OK to save the settings.
Similar steps to do this in Excel.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang

Using MS Word and Excel on Ipad Air

I use MS Word and Excel 2010 on my PC and I work from home copying data (copy and paste) from an internet web site into these programs. I have ordered an iPad Air and want to go to the internet with it when I'm away and copy formatted data from a web page into a program on my iPad, then put these files (one a text file in Word and one a data file in columns in Excel in idrop box where they will stay until I get back home and copy them to my PC in Word and Excel. Can I do this? How?

Thank you, that looks like the answer, now all I need to know is if the iPad will allow me to cut and paste.
The web site I use is an online newspaper that I get information for mailing advertising. I sign in and go to text files and data lists and from there I open the office program and select, copy and paste. The Excel workbook page accepts the paste of the columns data exactly as they appear on the web page. Also the text section allows me to select just what text I need, then copy and paste into Word. They are not large files. I can fine tune the data later on my PC Office 2010 when I retrieve it from Drop Box.
Up to now I have been doing it from my PC Office 2007 laptop when I'm away and it works fine and put them in Drop Box. Now I want to use an iPad, as my laptop is heavy and the battery is dead. I also plan on using iCloud. The apple world is all very new to me.

Adobe photoshop,word, and excel won't open on my 2010 air mac

adobe photoshop,word, and excel won't open on my 2010 air mac. Message says I have lost my power pc connection. this happened while in Mexico

Adobe Photoshop CS2, MS Word 2004 and other PPC apps running in Snow Leopard Server installed into Parallels for use in Lion or Mt. Lion:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439

PC Windows, Office 2010, Acrobat X Standard - how to configure Acrobat that PDF documents are generated in PDF version 1.4 by default for word and excel (already tried to change the pre-adjustment for word and excel)

PC Windows 7 Pro
Office 2010
Acrobat X Standard
Ich habe bereits in den Voreinstellungen von Acrobat X Standard für Word und Excel die Einstellungen dahingehend geändert, dass PDF Dateien mit der PDF Version 1.4 generiert werden - jedoch funktioniert dies nicht.

Edit:
The description above was erroneously written in german - sorry for that - please find the english description below:
PC Windows 7 Pro
Office 2010
Acrobat X Standard
I alrady tried to change the pre-adjustment in Acrobat X Standard for Word and Excel, that PDF files should be generated in PDF Version 1.4 out of these applications - but it did not work.

Taskbar Jumplist anomalies for Word 2010 and Excel 2010

I am having problems with missing jumplists for Office 2010 products (Word and Excel) pinned on the Windows 7 taskbar, **BUT** have no problems with jumplists for Notepad and IE pinned on the taskbar.
Observation 1: I just upgraded from Office 2010 Starter to full Office 2010 by getting a product key. Full Office 2010 was installed on my laptop when I purchased it but only Starter was licensed. Full Office 2010 was unusable until the upgrade. I suspect
the leapfrog from Starter to full Office 2010 might have a part in this jumplist issue.
Observation 2: I can see from a DOS prompt that the AutomaticDestinations and CustomDestinations folders exist under Recent. However, from Windows Explorer I cannot see the 2 folders under Recent. (That may be a clue…if other people CAN see the 2 folders
from Windows Explorer.)
Observation 3: In DOS, I can see that both directories have files ending in -ms. I can also see updates (new files with fresh timestamps) from opening Word and Excel files in those 2 directories. It’s almost like Word and Excel don’t understand to go look
in those 2 directories after the Office upgrade, even though Windows 7 (?) generates the -ms files for the jumplist function.
Observation 4: Again, no problems with Notepad and IE jumplists. I can remove the files from the AutomaticDestinations folder and cause Notepad to have no jumplist items, and then restore them and Notepad has jumplist contents again.
Observation 5: I had no problem using jumplists with Word Starter and Excel Starter. All references to Office/Word/Excel Starter are now gone from the Starter button and All Programs - sent to Recycle bin. I deleted the Word Starter
and Excel Starter entries when I upgraded, but I just deleted the Microsoft Office Starter (Englisgh) entry under All Programs today...I thought it was a benign entry and wouldn't hurt since I wasn't using it. Maybe there's some corruption in registry
as a result of the mixture. Interestingly, I can drag a file created in Word Starter to the taskbar and it will try to pin it to the Word Starter taskbar "ghost" that's in the Recycle bin.
Any clues anyone? I have no large files in the two destination folders, and have only about 20 files total in each folder...far fewer than the 999 threshhold mentioned in one of the updates for Office 2010.
Thank you!

I encountered exactly the same problem, and under exactly the same circumstances as the original poster (upgraded from Office Starter to Home and Business; jump lists worked fine in Starter, then stopped working for Excel and Word after upgrading).
Like the original poster, none of the various fixes found online corrected the problem, nor did re-installing Office.
I also tried what was suggested by Max Meng and created a new User Account. The problem occurred for the new account, just as it did with the old one.
After about 6 hours of fighting, I have finally solved the problem. The solution is not easy, fast or pretty.
What I did was uninstall Office (again) using the Control Panel. Then I ran a FixIt utility found here:
http://support.microsoft.com/kb/290301 (method 2)
My hope was that this would do additional registry clean-up. I knew from earlier attempts that this alone would not fix the problem, though.
Despite uninstalling twice, there were still a lot of references left in the registry to "Word Starter" and "Excel Starter". Likewise, there were still references to "WINWORDC.EXE" and "EXCELC.EXE", which are the starter versions of the executables.
So I went through the registry using RegEdit, and manually deleted every key which included those strings. The largest number of cases were file type definitions for various Word and Excel file extensions. When in doubt, I deleted entire tag
hierarchies for Word and Office file types, figuring that they would be restored when I reinstalled Office. In the process, I removed pretty much every reference to Word or Excel that I could find in the registry.
I also deleted any directory on my hard drive (in c:\Program Files(x86), c:\Program Data, and c:\Users\<name>\AppData which appeared to be related to Office.
Having done this, I reinstalled again, and the jump lists for Word and Excel now work.
In debugging the problem, I found that .automaticDestination-ms files (which contain the data behind the jump lists) were not being created when I opened Word or Excel documents; they *were* being created when I manually pinned individual files to the
taskbar, however.
I suspect that this might be due to the long hexadecimal filename being based on a hash of the application name, or what the system thinks is the application name based on the file type. Removing the references to "Word Starter" and "Excel Starter",
and the corresponding WINWORDC.EXE and EXCELC.EXE in the registry might have cleared up this problem.
Obviously this fix is potentially risky, and should only be attempted if you are comfortable editing the registry. Making a full system backup beforehand would be a wise precaution. For this specific case, however (broken jump lists after
upgrading from Starter to full Office) it would appear the only alternative is a clean install of Windows (to wipe the registry completely).

Mac book pro running slow and word and excel from Mac not opening

Mac book pro running slow and word and excel from Mac not opening

Call it Monday morning humor.... ALL the MacBook Pro owners we see asking the same thing (more than once a day, too) are slower since 10.10.x so we can assume something. Heard the very same story with every new OS in the past decade from laptop owners, heard a lot especially with Snow Leopard back in Aug-Sept 2009.
A new OS goes better if you do a clean install / checked Roaringapps.com for compatibility / wait for vendors to have updates
About the only things that can be done in addition - if you have like many posting those symptoms have minimal 4GB RAM is to upgrade to 8GB+ and throw in a new 250GB+ SSD (the most recent MBP have to be bought with and cannot add RAM later).
Even the MacBook Air 2014 though with 4GB RAM have PCIe-SSDs that helps, plus 4th gen Intel i5's and an IG of 5000 or later all help.
Try including more details. Model year and configuration at least.

Outlook 2013 won't open Word and Excel attachments

Had a new PC set up with MS Office 2013 programs. Outlook 2013 Word and Excel attachments do not open. Program opens, but to a blank screen. This includes my attachments created on the same computer. Boxes in "Trust Center"
are unchecked. Problem persists. It is possible to save the attachment, then open Word or Excel and see the saved file, but this is time consuming and annoying. Outlook 2013 should just open its attachments from the message without a thousand
extra steps. Thank you.

Hi Gish,
Thank you for your question.
Did this issue occur in OWA?
We could open outlook->File->option->Trust Center ->Microsoft Outlook Trust Center->Trust Center Setting->Attachment Handing->Attachment and Document Preview…
Then we make sure all option have check. And didn’t uncheck “Turn off Attachment Preview”, or rebuild the profile to check if the issue persist.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

The dock in Maverick is doing strange things to word and excel files

For years (and Mac operating systems), I have kept Microsoft word and excel documents on my doc. I use these documents frequently...click on the file icon in the dock, it opens, I edit and save. Click on the icon again and the saved document opens. so simple.
Since upgrading, I click on the icon, the file opens with a number following the file name (version number I assume) but before docx or xlsx. I edit and save, but get a "save as" box. Now I have to edit the file's name, find the original and replace the original with the new version. Not so simple.
Since I open and close my daily billing log many times a day, this has slowed me down (and irritated me).
I have had no other problems with my Maverick installation and these files are in Word and Excel 2008. This does not happen to powerpoint or any other file I tried so far.
Any suggestions on how to solve this?

Your Mac will generate a new .plist file automatically after restart.
Deleting the .plist file shouldn't delete any app icons from the dock.
Check the startup disk just in case.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys.
From there you can access the built-in utilities to repair the disk using OS X Recovery

How do i get word and excel on my mac

Hi,
I have recently bought a Mac book pro. Till now have been using a acer laptop.
can any one help with the following
I want to transfer all my data( mostly word, excel and photos) to my Mac
what software do i use to in Mac to be able to use the word and excel.
Please help. Iam not computer savy so going nuts now.

Welcome to the Apple Forum, sujithna!
sujithna wrote:
...a Mac book pro. Till now have been using a acer laptop.
can any one help with the following
I want to transfer all my data( mostly word, excel and photos) to my Mac
Take a look at the options to Transfer data from a PC to a Mac. Consider the first option with Migration Assistant.
HTH

I am thinking of changing to a IMaC for my computer and Want to know if I will be able to upload documents from my old computer and all my photos. Everything is in Microsoft Word and excel. I have a iphone and ipad so that is why i am thinking of changing

If I change to a IMAC will I be able to upload all my photos and word and excel documents? Also does it have USB ports like I have already used?
Is there a DVD player on IMACS? It is scary making the move until I am sure I can use everything I already have. I also have NEAT for all my recepits also.

When the new Mac first starts up, you get the opportunity to migrate your files from another computer, including a PC. This link tells you how to do it from Windows.
As for the iMac's features, you can look through this website to get all the details.
It is possible to install Windows on a Mac and run your Windows applications within it. It's also possible to use programs that are for the Mac which can work with most MS Office files. One good example is LibreOffice.
Welcome to the Mac.

.pdf, Word, and Excel email attachments are not recognized

I have something very weird happen. For the past 2 weeks or so, when I recieve a pdf file as an email attachment, and I try to open it I get a message that the file is corrupt. If I go to my husband's PC, I can open the file, which means it is not corrupt. I have tried with Preview (and Acrobat Adobe Pro 9.2.0) to double-click the file, no result. I have also saved on the desktop, and double-clicked; lastly, I tried to open from within both Preview and Acrobat. Nothing makes the files open. I had some of the files resent, as I wanted to make sure, nothing works.
Does anyone have an idea what's going on? Also, files I have saved on the HD a while back open without any problems whatsoever.
Thanks for any feedback.

If they're really PDF files have whoever's sending them zip them first. BTW, what's with the Word and Excel files in the title? You didn't say anything about those.

Exporting pdfs to word and excel file formats and translating

Hello, I am new to this forum and came here because I am a professional translator. Although we should be given documents in their original file format, in the real world translators have to convert pdfs such as manuals or annual reports into word or excel files. Given the fact we often work for agencies, and/or do not work directly with the people who created the original files inthe first place, with the best will in the world we normally have to make do with converting the pdf file, or lose the job.
I would like advice on the best way to learn more about pdf to word and excel conversion and ways of keeping formatting when it is helpful and removing what is not.
The general problem is (well the problem is really ignorance on my part!) of course getting the "look and feel" similar in the converted document and knowing more about manipulating the formating and elements which get converted.
Any help or pointers to online tutorials whether multimedia or text much appreciated.
David Hardisty (david1610)

Thank you Lori, this is so clear! I am a teacher as well and there are clear presentations and wonderfully clear presentations and this is in the latter category.
A tiny suggestion. You would not believe how many pdf files exported to word I have received that are Portuguese content and the sender has not set the language to Portuguese! So in your text entry you might want to mention the language setting. I know it is obvious, but as we know sometimes we cannot see the obvious!
I will need to look far more carefully at the final things in your video.
Are there any special considerations for exporting pdf files as Excel? My original doubt was I had to translate some accounting documents. 95% of the document was numbers which did not changing (except for commas to periods and vice versa due to different separator conventions). I did not now how to just select e.g. the vertical column with text. I will go back and try with this suggestion because in this case the look and feel of the numbers was important and the precise fonts etc. seemed to cause problems. But now I am getting out of my depth!
Thank you again!
DavidHardisty

Problem in opening of word and excell files downloaded from email attachment in MS office professional 2013 paper licence

Hi,
I am facing the problem in opening the word and excel files received through email in my MS office professional 2013 paper licence, Microsoft Windows 8.1 enviornment. please help in this matter
regards
Rajeev Bhagwat
Administrative Officer-I
Purchase and Store Section
UGC-DAE Consortium for Scientific Research,
University Campus, Khandwa Road, Indore (M.P.), India.
Telefax-+917312361546

I should further say the files I sent are .xlsx and .docx files. They look fine my end and I send such files all the time without problems.
However, I did try to cheat by going in via the Safari onto my 'live' online email account and the Safari automatically transfers them to winmail.dat files with the same result.
Ahh - have just been on using my PC this time and you are right, it seems that the service provider does the transfer and then when my outlook opens the file (on the PC), it must reconvert to .xlsx etc again.
Very strange.
Ergo, I guess the question should be how I open wimail.dat files ??

Outlook,Word and Excel 2010 slow on first open

Similar Messages

Maybe you are looking for