Output alignment in SMARTFORMS Output!!!! Need Help!!!!

Hi All,
The requirement is something like this...
Consider i have an internal table with a fixed text field length of 30 characters!
Line 1 of internal table: My name is Sundar   - 17 chars
Line 2 of internal table: and my age is 26      - 16 chars
Line 3 of internal table: and my native is Madurai - 24 chars
Line 4 of internal table: and I live in Singapore      - 23 chars
Now my requirement is, while generating the output using smart forms...
I get the output something like this...
My name is Sundar
and my age is 26
and my native is Madurai
and I live in Singapore
I want my output justified..
Something like...
My    name     is     Sundar(30 chars)
and    my   age    is       26(30 chars)
and my native is Madurai(30 chars)
and I live in       Singapore(30 chars)
This looks justified and aligned!!!
I want the output of each line of internal table to use all the 30 defined characters and spread.. irrespective of how many characters are there in each line!!!
Hope am clear!!!!
Condense removes all the spaces!!!
But i want something like i illustrated above.. please help!!!
Cheers,
Sundar.

Hi Sachin,
Sorry... i've ammended my required output in BOLD!!!
It is something like the "JUSTIFY" option in Microsoft Word!!!!
When u type a para... and you press on justify... you'll see the output screen aligned right?
Something similar!!!
Thanks!!!!
The requirement is something like this...
Consider i have an internal table with a fixed text field length of 30 characters!
Line 1 of internal table: My name is Sundar - 17 chars
Line 2 of internal table: and my age is 26 - 16 chars
Line 3 of internal table: and my native is Madurai - 24 chars
Line 4 of internal table: and I live in Singapore - 23 chars
Now my requirement is, while generating the output using smart forms...
I get the output something like this...
My name is Sundar
and my age is 26
and my native is Madurai
and I live in Singapore
I want my output justified..
Something like...
My    name     is     Sundar(30 chars)
and   my    age    is       26(30 chars)
and my   native is Madurai(30 chars)
and   I live    in    Singapore(30 chars)
This looks justified and aligned!!!
I want the output of each line of internal table to use all the 30 defined characters and spread.. irrespective of how many characters are there in each line!!!
Hope am clear!!!!
Condense removes all the spaces!!!
But i want something like i illustrated above.. please help!!!
Cheers,
Sundar.

Similar Messages

Background image won't align properly in IE7, need help...

Heya,
I am working on a website that is using the following CSS to
display a shadow effect for an image. It's calling a background
image and using margins to align it properly but IE7 refuses to
render it yet Safari, FF and even IE6 display it properly no
problems.
.img-shadow-wrapper { /* Drop Shadow */
*background: none;
_background: url(/themes/ocp/images/shadow.gif) no-repeat
bottom right;
.img-shadow-wrapper img { /*Drop Shadow Positioning */
border: 1px solid #777;
padding: 1px;
margin: 0px 5px 5px 0px;
HTML
<div class="img-shadow-wrapper">
<img src="
http://web.ocp.org/products/12244_t.jpg"/>
</div>
Can anyone help me find the solution?? Thanks

Why are you hacking?
.img-shadow-wrapper { /* Drop Shadow */
*background: none;
_background: url(/themes/ocp/images/shadow.gif) no-repeat
bottom right;
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Spencer Hill" <[email protected]> wrote in
message
news:f1vvuk$b3p$[email protected]..
> Heya,
> I am working on a website that is using the following
CSS to display
> a
> shadow effect for an image. It's calling a background
image and using
> margins
> to align it properly but IE7 refuses to render it yet
Safari, FF and even
> IE6
> display it properly no problems.
>
> .img-shadow-wrapper { /* Drop Shadow */
> *background: none;
> _background: url(/themes/ocp/images/shadow.gif)
no-repeat bottom right;
> }
> .img-shadow-wrapper img { /*Drop Shadow Positioning */
> border: 1px solid #777;
> padding: 1px;
> margin: 0px 5px 5px 0px;
> }
>
> HTML
> <div class="img-shadow-wrapper">
> <img src="
http://web.ocp.org/products/12244_t.jpg"/>
> </div>
>
> Can anyone help me find the solution?? Thanks
>

Merging Smartform Output and Adobe Form Output in a single PDF File

Hi All,
My Requirement is as follows -
I have multiple Smartforms and a single Adobe Form.
I want to merge the Smartform Outputs and Adobe Form output in a single PDF.
I am able to merge multiple Smartform Output in a PDF , but not able to find any way to merge smartform and adobe form output as the Smartform output is in OTF Format and Adobe form output is in PDF Format itself.
I have tried few ways , but could not find any success.
Request you all to give me some direction to this problem.
Thanks & Regards
Bhavika

Kumar,
I am afraid this is not possible using SAP functionality. There are probably 3rd party tools which allow you to merge several PDFs into one, but SAP itself does not offer such a mechanism. There is an internal SAP function, though, which can merge several "parts" (=several PDFs) within an Adobe-created spool request into a single PDF, intended for downloading this PDF from SP01.
This is described in note 1717357.
Best regards,
Alexander

Need help in printing text in footer

Hi Friends,
I need help from all you guys. I am working on SmartForms, and need help. Please look into the below situation, and appreciate if you can help me out.
The Literal **DATA CONTINUED ON NEXT PAGE** is to be displayed at the bottom of the
page in the Footer only if the data rolls onto second page.
Thanks,
Nikhil

Hi,
define the two variables in the global definition as
g_cnt type sy-tabix.
g_flg type c .
->in the initialization tab pass the internal table that is the main window.
g_cnt = lines( the table name which you are using in the main
window before the footer).
Now you have the total no of lines in the g_cnt.
in the loop which is in main window create the program line pass the output parameter as g_flg.
in the condions tab give the condition as g_cnt = sy-tabix.
in the source code of that program lines
g_flg = 'X'.
now for the footer where you are displaing the text coutinued on next page for in codition tab give the condition as g_flg = space.
Thanks,
NN.

Need help adobe bridge cc output module

I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!

oh,my system is windows 8.1. sorry, lol.

Need help to draw a graph from the output I get with my program please

Hi all,
I please need help with this program, I need to display the amount of money over the years (which the user has to enter via the textfields supplied)
on a graph, I'm not sure what to do further with my program, but I have created a test with a System.out.println() method just to see if I get the correct output and it looks fine.
My question is, how do I get the input that was entered by the user (the initial deposit amount as well as the number of years) and using these to draw up the graph? (I used a button for the user to click after he/she has entered both the deposit and year values to draw the graph but I don't know how to get this to work?)
Please help me.
The output that I got looked liked this: (just for a test!) - basically this kind of output must be shown on the graph...
The initial deposit made was: 200.0
After year: 1        Amount is: 210.00
After year: 2        Amount is: 220.50
After year: 3        Amount is: 231.53
After year: 4        Amount is: 243.10
After year: 5        Amount is: 255.26
After year: 6        Amount is: 268.02
After year: 7        Amount is: 281.42
After year: 8        Amount is: 295.49
After year: 9        Amount is: 310.27
After year: 10        Amount is: 325.78
After year: 11        Amount is: 342.07
After year: 12        Amount is: 359.17
After year: 13        Amount is: 377.13
After year: 14        Amount is: 395.99
After year: 15        Amount is: 415.79
After year: 16        Amount is: 436.57
After year: 17        Amount is: 458.40And here is my code that Iv'e done so far:
import javax.swing.*;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.RenderingHints;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.lang.Math;
import java.text.DecimalFormat;
public class CompoundInterestProgram extends JFrame implements ActionListener {
    JLabel amountLabel = new JLabel("Please enter the initial deposit amount:");
    JTextField amountText = new JTextField(5);
    JLabel yearsLabel = new JLabel("Please enter the numbers of years:");
    JTextField yearstext = new JTextField(5);
    JButton drawButton = new JButton("Draw Graph");
    public CompoundInterestProgram() {
        super("Compound Interest Program");
        setSize(500, 500);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        amountText.addActionListener(this);
        yearstext.addActionListener(this);
        JPanel panel = new JPanel();
        panel.setBackground(Color.white);
        panel.add(amountLabel);
        amountLabel.setToolTipText("Range of deposit must be 20 - 200!");
        panel.add(amountText);
        panel.add(yearsLabel);
        yearsLabel.setToolTipText("Range of years must be 1 - 25!");
        panel.add(yearstext);
        panel.add(drawButton);
        add(panel);
        setVisible(true);
        public static void main(String[] args) {
             DecimalFormat dec2 = new DecimalFormat( "0.00" );
            CompoundInterestProgram cip1 = new CompoundInterestProgram();
            JFrame f = new JFrame();
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.getContentPane().add(new GraphPanel());
            f.setSize(500, 500);
            f.setLocation(200,200);
            f.setVisible(true);
            Account a = new Account(200);
            System.out.println("The initial deposit made was: " + a.getBalance() + "\n");
            for (int year = 1; year <= 17; year++) {
                  System.out.println("After year: " + year + "   \t" + "Amount is: " + dec2.format(a.getBalance() + a.calcInterest(year)));
          @Override
          public void actionPerformed(ActionEvent arg0) {
               // TODO Auto-generated method stub
class Account {
    double balance = 0;
    double interest = 0.05;
    public Account() {
         balance = 0;
         interest = 0.05;
    public Account(int deposit) {
         balance = deposit;
         interest = 0.05;
    public double calcInterest(int year) {
           return balance * Math.pow((1 + interest), year) - balance;
    public double getBalance() {
          return balance;
class GraphPanel extends JPanel {
    public GraphPanel() {
    public void paintComponent(Graphics g) {
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
        g2.setColor(Color.red);
}Your help would be much appreciated.
Thanks in advance.

watertownjordan wrote:
http://www.jgraph.com/jgraph.html
The above is also good.Sorry but you need to look a bit more closely at URLs that you cite. What the OP wants is a chart (as in X against Y) not a graph (as in links and nodes) . 'jgraph' deals with links and nodes.
The best free charting library that I know of is JFreeChart from www.jfree.org.

Need smartform output in different languages

Hi expert,
Can you please let me know how can I see the output of a smartform in different languages. I'm seeing the output of a sales order. I have three output types . ZZAC,ZZ00, ZZ01. The smarform is developed with the language attributes of Translate into all languages. Is it required to convert the forms in SE63? or there are other ways we can see it.
I need the output in all the languages like FR,EN,DE,IT,ES ,EN etc.
Thanks in Advance,
Abhi

HI,
Try This... hope it will solve your problem....
To maintain the translations:
1. Go to transaction SE63 in R/3. Go to menu Translation->R/3 Enterprise->Other Long Texts.
2. Select the object type in the pop up. Smartform (SSF) object type is found under Forms and Styles(FS).
3. Enter the name of the Smart form and choose the source and target language(Let the Source Language be 'EN'). Now Click on 'EDIT'.
4. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom. Find the text for which you need to maintain the translation and insert the translation in that place.
As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this language).This will give the smartform in the required language.
Regards,
Shri

Subquery results need help with output

Requirements:
There is request to dump every days data from one table into text file.
Tables:INSPECTION_RESULTS
NJAS
Primary Key: RES_SYS_NO
Parent table: INSPECTION_RESULTS
Child table: NJAS
Purpose:
1. obtain output results for the MIN and MAX RES_SYS_NO from INSPECTION_RESULTS table for yesterdays date.
2. Create comma delimited file for following columns using above table data output.
Script thus far:
SELECT NJA_RES_SYS_NO||','||NJA_TEST_REC_NO||','||NJA_LIC_ST_ID||','||NJA_ETS_ID||','||NJA_SW_VER||','||NJA_TECH_ID||','||NJA_VIN||','||NJA_LIC_NO||','
||NJA_LIC_JUR||','||NJA_LIC_SRC||','||NJA_MODEL_YR||','||NJA_MAKE||','||NJA_MODEL||','||NJA_VHCL_TYPE||','||NJA_BODY_STYLE||','||NJA_CERT_CLASS||','||
NJA_GVWR||','||NJA_ASM_ETW||','||NJA_ETW_SRC||','||NJA_NO_OF_CYL||','||NJA_ENG_SIZE||','||NJA_TRANS_TYPE||','||NJA_DUAL_EXH||','||NJA_FUEL_CD||','
|| NJA_VID_SYS_NO||','|| NJA_VRT_REC_NO||','|| NJA_ARMSTDS_REC_NO||','|| NJA_RSN_F_N_TESTABLE||','|| NJA_DYNO_TESTABLE||','||
NJA_CURR_ODO_RDNG||','|| NJA_PREV_ODO_RDNG||','|| NJA_PREV_TEST_DT||','|| NJA_TEST_TYPE||','||
NJA_TEST_START_DT||','|| NJA_TEST_END_TIME||','|| NJA_EMISS_TEST_TYPE||','|| NJA_TEST_SEQ_NO||','
||NJA_LOW_MILE_EXEMP||','||NJA_TIRE_DRY||','|| NJA_REL_HUMID||','|| NJA_AMB_TEMP||','||NJA_BAR_PRESS||','|| NJA_HCF||','||
NJA_GAS_CAP_ADAP_AVL||','|| NJA_GAS_CAP_REPL||','|| NJA_OVERALL_GAS_CAP_RES
FROM NJAS
WHERE NJA_RES_SYS_NO IN (SELECT MIN(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS WHERE NJA_RES_SYS_NO IN
(SELECT MAX(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS, (SELECT SYSDATE-1 FROM DUAL))
It works but not sure if I am getting accurate results. Can anyone help me fine tune this subquery script? Thanks!
Scott

Duplicate post
See my answer in your other posting here Re: need help with script

Need Help regarding text Output

Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.Nisar

DATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
    from t503t
    into itab_odoe-grade
    where persk eq pernr-persk
    AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets.

Need Help with Output Routing...

Ok, I've spent a few hours trying to figure this out and I give up....here's my question:
I've got a MOTU Traveler and I'd like to have the Logic Output 1-2 feed its signal to both MOTU Analog Output 1-2 (Main Out) and Analog Output 3-4. I want the same signal going to both places. Basically I have two different sets of speakers I use when I'm finishing up a track and like to A/B between the different speaker sets. I've tried everything in Logic and other then setting up another output in Logic labeled 3-4 and manually switching each channel and bus to that new output, nothing works. I also tried the cuemix console and didn't see anyway to do it in there. The only other thing that seemed to work was using an I/O plugin sending output 1-2 to output 3-4, but the signal was super distorted going into 3-4. Anyone know how to have a single Logic Output (1-2) go to multiple Outputs on a MOTU?

Hi,
You can set up another output (3+4) and feed it from a buss that is at unity gain,from the main output 1+2
Then in your cuemix you can calibrate that output to be the same level as the mains,so when you compare the speakers,the levels stay the same when switching.
Just make sure to check the physical outputs on your traveler are set to the correct impedance (+4 or -10) to match the main outs.
Cheers

Smartforms output as HTML in email

Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
        Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSF_SAMPLE_HTML'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS     TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = CONTROL_PARAMETERS
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = OUTPUT_OPTIONS
USER_SETTINGS              = 'X'
IMPORTING
   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
      L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
      HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
      HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
    INBUFF                   = HTML_XSTR
INBUFFLG                 = 0
   INCODE                   = '4110' "utf-8
OUTBUFFLG                = 0
OUTCODE                  = '0000'
   CSUBST                   = 'X'
SUBSTC_HASH              = ' '
SUBSTC_DOT               = ' '
   SUBSTC_SPACE             = 'x'
SUBSTC                   = '00035'
IMPORTING
INUSED                   =
   OUTBUFF                  = HTML_STR
OUTOVERFLOW              =
   OUTUSED                  = HTML_LEN
SUBSTED                  =
INPUT_ENDS_IN_CHAR       =
ERRMSG                   =
EXCEPTIONS
INVALID_CODEPAGE         = 1
INTERNAL_ERROR           = 2
CANNOT_CONVERT           = 3
FIELDS_BAD_TYPE          = 4
OTHERS                   = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
      L_LENGTH TYPE I,
      L_DIFF TYPE I,
      LT_SOLI TYPE SOLI_TAB,
      LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
    CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
    CONTENT     = LT_SOLI
   FILENAME    =
   DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
      GR_XSTR TYPE XSTRING,
      L_GR_RAW TYPE BAPICONTEN,
      L_CONTENT_ID TYPE STRING,
      L_CONTENT_TYPE TYPE W3CONTTYPE,
      L_OBJ_LEN TYPE SO_OBJ_LEN,
      L_FILENAME TYPE STRING,
      LT_SOLIX TYPE SOLIX_TAB,
      LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
    CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
    L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
    IF L_DIFF > L_LENGTH.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
    ELSE.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
    ENDIF.
    APPEND LS_SOLIX TO LT_SOLIX.
    ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
    EXPORTING
      CONTENT      = LT_SOLIX
     FILENAME     =
     EXTENSION    =
     DESCRIPTION =
      CONTENT_TYPE = L_CONTENT_TYPE
      LENGTH       = L_OBJ_LEN
      CONTENT_ID   = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
      P_SUBJECT TYPE SO_OBJ_DES,
      LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
      LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
      LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
    EXPORTING
      I_SUBJECT          = P_SUBJECT
      I_LANGUAGE         = SY-LANGU
      I_IMPORTANCE       = '5'
      I_SENSITIVITY      = 'F'
      I_MULTIREL_SERVICE = LO_MIME_HELPER
    RECEIVING
      RESULT             = LO_DOC_BCS
   CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
   CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
   CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
      RECEIVER TYPE SOMLRECI1,
      L_MAIL_ADDRESS TYPE AD_SMTPADR,
      LO_BCS TYPE REF TO CL_BCS,
      LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
      L_USERNAME TYPE UNAME,
      SEND_PARTNER TYPE BU_PARTNER,
      LI_SENDER TYPE REF TO IF_SENDER_BCS,
      LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
      LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
    RECEIVING
      RESULT = LO_BCS
   CALL METHOD LO_BCS->SET_DOCUMENT
     EXPORTING
       I_DOCUMENT = LO_DOC_BCS
   CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
    L_USERNAME = SEND_PARTNER.
    TRANSLATE L_USERNAME TO UPPER CASE.
    LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
    DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
    L_FROM_MAIL_ADDRESS = L_USERNAME.
    LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
    EXPORTING
      I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
   EXPORTING
     I_ADDRESS_STRING = L_MAIL_ADDRESS
    I_ADDRESS_NAME   =
    I_INCL_SAPUSER   =
   RECEIVING
     RESULT           = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
   EXPORTING
     I_RECIPIENT = LO_RECEPIENT
    I_EXPRESS    =
    I_COPY       =
    I_BLIND_COPY =
    I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
    I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
   I_WITH_ERROR_SCREEN = SPACE
RECEIVING
    RESULT              = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK.

Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
        Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSF_SAMPLE_HTML'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS     TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = CONTROL_PARAMETERS
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = OUTPUT_OPTIONS
USER_SETTINGS              = 'X'
IMPORTING
   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
      L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
      HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
      HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
    INBUFF                   = HTML_XSTR
INBUFFLG                 = 0
   INCODE                   = '4110' "utf-8
OUTBUFFLG                = 0
OUTCODE                  = '0000'
   CSUBST                   = 'X'
SUBSTC_HASH              = ' '
SUBSTC_DOT               = ' '
   SUBSTC_SPACE             = 'x'
SUBSTC                   = '00035'
IMPORTING
INUSED                   =
   OUTBUFF                  = HTML_STR
OUTOVERFLOW              =
   OUTUSED                  = HTML_LEN
SUBSTED                  =
INPUT_ENDS_IN_CHAR       =
ERRMSG                   =
EXCEPTIONS
INVALID_CODEPAGE         = 1
INTERNAL_ERROR           = 2
CANNOT_CONVERT           = 3
FIELDS_BAD_TYPE          = 4
OTHERS                   = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
      L_LENGTH TYPE I,
      L_DIFF TYPE I,
      LT_SOLI TYPE SOLI_TAB,
      LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
    CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
    CONTENT     = LT_SOLI
   FILENAME    =
   DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
      GR_XSTR TYPE XSTRING,
      L_GR_RAW TYPE BAPICONTEN,
      L_CONTENT_ID TYPE STRING,
      L_CONTENT_TYPE TYPE W3CONTTYPE,
      L_OBJ_LEN TYPE SO_OBJ_LEN,
      L_FILENAME TYPE STRING,
      LT_SOLIX TYPE SOLIX_TAB,
      LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
    CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
    L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
    IF L_DIFF > L_LENGTH.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
    ELSE.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
    ENDIF.
    APPEND LS_SOLIX TO LT_SOLIX.
    ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
    EXPORTING
      CONTENT      = LT_SOLIX
     FILENAME     =
     EXTENSION    =
     DESCRIPTION =
      CONTENT_TYPE = L_CONTENT_TYPE
      LENGTH       = L_OBJ_LEN
      CONTENT_ID   = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
      P_SUBJECT TYPE SO_OBJ_DES,
      LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
      LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
      LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
    EXPORTING
      I_SUBJECT          = P_SUBJECT
      I_LANGUAGE         = SY-LANGU
      I_IMPORTANCE       = '5'
      I_SENSITIVITY      = 'F'
      I_MULTIREL_SERVICE = LO_MIME_HELPER
    RECEIVING
      RESULT             = LO_DOC_BCS
   CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
   CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
   CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
      RECEIVER TYPE SOMLRECI1,
      L_MAIL_ADDRESS TYPE AD_SMTPADR,
      LO_BCS TYPE REF TO CL_BCS,
      LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
      L_USERNAME TYPE UNAME,
      SEND_PARTNER TYPE BU_PARTNER,
      LI_SENDER TYPE REF TO IF_SENDER_BCS,
      LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
      LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
    RECEIVING
      RESULT = LO_BCS
   CALL METHOD LO_BCS->SET_DOCUMENT
     EXPORTING
       I_DOCUMENT = LO_DOC_BCS
   CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
    L_USERNAME = SEND_PARTNER.
    TRANSLATE L_USERNAME TO UPPER CASE.
    LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
    DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
    L_FROM_MAIL_ADDRESS = L_USERNAME.
    LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
    EXPORTING
      I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
   EXPORTING
     I_ADDRESS_STRING = L_MAIL_ADDRESS
    I_ADDRESS_NAME   =
    I_INCL_SAPUSER   =
   RECEIVING
     RESULT           = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
   EXPORTING
     I_RECIPIENT = LO_RECEPIENT
    I_EXPRESS    =
    I_COPY       =
    I_BLIND_COPY =
    I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
    I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
   I_WITH_ERROR_SCREEN = SPACE
RECEIVING
    RESULT              = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK.

Smartforms output in Duplex mode

Hello Gems,
I have defined 3 pages and i had set all the pages to duplex mode.
I need to print set of instructions in my smartform output in duplex mode (front & back of page)
Page1 : next window is Page 2 and i have a command to print Instructions (page INST)
Page2 : next window is blank(or page 2) and i have a command to print conditions (page INST)
Page INST : Does not has main window and next page is Page 2.
My pages flow in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows.
I need to see the INSTRUCTONS on every page that is printed with data. But i am getting an extra page that is blank
with no INSTRUCTIONS at the back.
when i print, i am 1st page properly but also getting an xtra blank page with no INSTRUCTIONS on the back.
Can some one suggest me ?
Thanks
Dan

Hi,
Define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
For more details please refer to the below limk
http://help.sap.com/saphelp_nw70/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
Thank U,
Jay....

SAPFM06P - Can this program be used for triggering a Smartform Output??

Hi Experts!
I researched a lot and came to a conclusion that Program SAPFM06P can only be used trigger either a SAP SRIPT Output or a PDF FORM output. It cannot be used to trigger a SMARTFORM output directly as there is no code in it to trigger a SMARTFORM.
My understanding:
I will have to either create an Enhancement to the Program or a Zcopy of SAPFM06P where I need to write the logic in form routine ENTRY_NEU to call a SMARTFORM.
Please tell me if my understanding is correct and please guide me if there is any easier way to achieve the same functionality.
Thanks for help!
Greetings,
Amit

Hi,
U can Copy this standard Program to ZProgram and Insert the FM SSF_FUNCTIONMODULE_NAME and call ur smartform and assign the same combination to the Output type Given to u in NACE Transaction..
This is the Driver Program which I used for PO Smartform
[http://vjkvijaya.blogspot.com/2009/03/puchace-order-smartform-driver-program.html]
Regards,
Vijaya Lakshmi.T

VF03 smartform: Output could not be issued

Hi All,
Ive created a custom invoice print program and associated smartform.
These two run perfectly together when standing alone.
However Ive created a custom output type to call this program from VF03.
This output type appears in the "Issue Output To "options in VF03.
But it returns the message "Output could not be issued" when trying to print.
In debug mode the Print Program and smartform execute perfectly when calling from VF03 in the same way, but the output fails to appear.
In the Header -Output section inside the status of the output type is "Not Processed".
Any ideas guys??

Hi
It seems that the Output determination is not taking place correctly
the link between the Output type and Program and smartform is not established peoperly
You have to assign this in SPRO for the billing documents
And most of the times it won't work we assign our custom program to the custom output type
it is better to use the std output type and the Std program(you copy the std and can change it but the same copied ZPeogram to be attached) and Copied/modified smartform.
check this.
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Output Determiantion :
You can use output control to automate either messages or subsequent processing of partner-specific messages"
This means, it provides a method for you to perform subsequent processing once a document is saved in the system. This subsequent processing is normally to print the document, but can also include activities such as:
- Faxing the document
- Emailing the document
- Sending an idoc of the document
- Sending an EDI message for the document (via an Idoc)
- and so on.
In general, it uses the condition technique to determine what, if any, output is to be produced. The condition technique works by selecting key fields from the document (document type, plant, etc.) and matching them to master data records you have previously set up. If there is a match, then output is produced.
You can use transaction NACE for the output determination settings for all applications.
1. When you start transaction NACE, a list of all represented applications appears.
2. From this initial screen, you can access all the individual processing screens for output determination from the EDIT menu.
3. Select the relevant application. This transaction does not have a menu path in customizing.
Refer the following links.
http://help.sap.com/saphelp_crm40/helpdata/en/b3/58bf39f7568648e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/c0/4e4746497d11d385ee0000e81ddea0/content.htm
<b>Reward points for useful Answers</b>
Regards
Anji

Converting Smartforms output content into HTML File

Hi,
I have a requirement, Smartforms output contents needs be converted as HTML File and it should be sent as email.
I am able to get the Smartforms output in html format but the output is shown as binary format.
After the fm call the job_output_info parameter is holding the smartforms output content in
job_output_info-XMLOUTPUT[]           (xsf content)
job_output_info-XMLOUTPUT-STSHEET[]   (css content)
job_output_info-XMLOUTPUT-TRFRESULT[] (html content)
Help me out how to handle the job_output_info details to html format.
Code
DATA v_fm_name TYPE rs38l_fnam.
DATA v_tdsfname TYPE tdsfname VALUE 'ZVR39_SF'.
DATA output_options TYPE ssfcompop.
DATA job_output_info TYPE ssfcrescl.
DATA document_output_info TYPE ssfcrespd.
DATA job_output_options TYPE ssfcresop.
DATA w_control TYPE ssfctrlop.
*-Finding the Smartform Layout Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = v_tdsfname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
*-Defining the output to HTML Format
*-Activating XSF Output
output_options-xdfcmode   = 'X'.
output_options-xdf        = space.
output_options-xsfcmode   = 'X'.
output_options-xsf        = 'X'.
output_options-xsfoutmode = 'A'. "
output_options-xsfoutdev = 'P863'.
output_options-xsfformat = 'X'.
*-Calling the Smartform Layout
CALL FUNCTION v_fm_name
EXPORTING
    output_options       = output_options
    user_settings        = 'X'
IMPORTING
    document_output_info = document_output_info
    job_output_info      = job_output_info
    job_output_options   = job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
Giri

Hi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf

Output alignment in SMARTFORMS Output!!!! Need Help!!!!

Similar Messages

Maybe you are looking for