Output assignment.

Dear all,
How to do output assignment for cash receipt, cash payment, cash voucher and cheque printing? i.e., form name for the above items with regard to smart forms.
Thanks in advance,
A.Anandarajan.

Hi
please check following link -
[Print configuration of production order|printing of shop floor papers;
Regards,
Krishna Mohan

Similar Messages

Automatic output assignment for delivery document

HI
Can any bady let me know the pre requisites for automatic output assignment for delivery document with reference of PO(stock transfer order)
As of now i configureded every thing fine, i add manually the output is working fine, and i created condition record also. only the things in this is
i need this output automatically when i save my delivery document
Regards,
Vadivel

Dear Vadivel,
Go to your delivery output procedure control data here you you keep Manual only check box as uncheck for your Replenishment delivery output type.
Also check the Requirement assigned to your Replenishment delivery output type.
I hope this will help you,
Regards,
Murali.

How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce

Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
Bibhu

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

Smartforms PO - output type external send - for purchase order

Dear
I want to define a specific output type for example ZPOM, with medium 'External Send'. The communication Strategy is SMTP (MAIL).
The configuration of the Processing Routine is the following:
Program: - FM06P
Form Routine: ENTRY_MEU
SMARTFORM: Z_MM_PURCHASEORDER.
When we create this mesage in the PO, no mail is send. There is also no processing log available.
Is it possible to use the same smartform with print program that is used for Medium 'Print Output' for medium 'External Send'?
Best regards
Luc

What you need to do is to create in SPAD Output device for E-mail ( in the Host Spool Access Method define M:E-Mail to Receiver/Owner) and then in the 'Print Output' assign this device.
Hope this helps.
Thanks,
Naveed

Handling unit output determination questions

I have configured a new output type for a custom label we need to implement for handling units.   It is assigned as V6, for Ship-to Party/Shipping Material.
In VL01N or VL02N, I am able to create the handling units and pack the delivery line item materials into them.
I am able to manually assign the output type to the handling unit in VL01N/VL02N, but have not been successful in getting the output type to auto populate. I have verified that it is not populated after packing the HU and saving from VL01N, or when doing from VL02N, or after PGI.
I have been searching the forums and have not found the answers I need.
1. Is it possible for the output type to automatically populate for a handling unit? If so, at what point should this happen? I would think based on how our custom label output types for delivery documents behave, it would assign after save from either VL01N or VL02N.
2. When I create the HU, I specify a VERP packaging material number that represents the carton in order to create the HU. I do not have the material on the sales order or delivery as a line-item, and I am not getting any error messages indicating that it should be.
If this should work the way we expect it to, any suggestions on what I have overlooked that would prevent my output type from automatically assigning?
Thanks in advance for your help.
Dave

Hi Joan,
Thank you for your answers. They were most helpful. I was finally able to get the new Output Type to assign after I created the HU's and saved the delivery.
Hopefully you won't mind if I ask some related questions.
1. If I went to VL02N for a delivery where I had already created the handling unit, it did not automatically get the Output Type assigned when I saved. (Like it does for our delivery based labels when I add a user in NACE that previously wasn't identified to get the label.)   Is this the normal behavior for HU-based output or am I still missing something in my setup?
2. I did the VHAR step and specified both the Output Determination Procedure and the Output Type of my new label,as suggested.   This did work once I finally tested by creating a new HU for a delivery, rather than checking an existing delivery/HU. Is entering the Output Type here critical? If another customer has a different label format, I think assigning the Output Type here this will cause a problem for us. (I haven't had a chance to change the config to remove this and see if the Output assigns based on references elsewhere, now that I know it seems to assign only when the HU is initially created.)
Thanks again!
Dave

How to send the output of one step as input to next step

Hello All,
I have a question that how to send the output of the first step as the input to the next step.
for e.g
consider a test sequence as below,
1.battery ON.
2. read Voltage
3. Check battery voltage.
as initially the battery gets ON when ever the test starts. in the second step it reads the voltage. let us assume that the voltage is 11.5V,
in the third step we r checking/validating that battery voltage in the range 11V to 12 V. . I mean if the vloltage value is less than 11V or greater than 12V te test has to FAIL.
so in order to check that voltage we need to send the voltage read from the second step.
so how can I send the voltage read from the second step to the third step so that I can check the battery voltage test.
kindly suggest me this using LabVIEW/Test stand.

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

Outputing to an external mixer

Hi, I have just upgraded to an 1820 sound card
(emulator x studio). I want to output each channel in my DAW as seperate inputs in my mackie desk. I've got the hardware part sorted and I can route out of my sequencer fine, But in Patchmix even though I have enough ASIO cahnnels the final audio gets exported just as Stereo,(I hope I've explained it right). Does anyone know to configuire the output assignment so I get 8 seperate channels?
Thanks

Have you checked those guides @ E-MU support?
http://www.emu.com/support/files/dow...760&Platform=1
jutapa

Assigning Printers to Specific Shipping Points

Hi,
Our system has multiple Sales Organisations, within each - one plant/warehouse/shipping point.
I have added additional plants to a few of these sales orgs, along with the relative warehouse and shipping point.
Sales users now have the option of selecting a plant when in a sales order - depending on stock availability at each. We successfully have multiple deliveries generating for differnt plants, under 1 sales order.
However:
I don't know how to assign a separate printer device to each shipping point/plant. The plants are separate warehouse locations therefore it needs to be automatic.
I've tried VP01SHP, however all 60 shipping points that alreeady existed showed the same data, there must be somewhere else that defines them to a separate device?
Any help greatly appreciated.
Dan

Go through this IMG path to find the settings about LD00 output type (as shipping point related data will be maintain in appl V2).
SPRO path
IMG - LE - Shipping - Basic Shipping Functions - Output Control - Output Determination - Maintain Output Determination for Outbound Deliveries - Maintain Output Types, here you can find the LD00 Output type.
For more settings go through this IMG steps
-Maintain Condition Tables, 21-DlvType/Shipping Point
-Maintain Output Types, LD00 (Std Access sequence 0005-SalesOrg/Customer), so, to modify create Z Output type by copying LD00 and .
-Maintain Access Sequences, try 0010-DlvType/Shipping Point
-Maintain Output Determination Procedure, V10000-Header Output
-Assign Output Determination Procedures
Hope this can assist you in understanding or refer [output determination|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=ERPLO&title=outputdeterminationusingconditiontechnique&decorator=printable] for the same.
Thanks & Regards
JP

Fax output for multiple recipients

Hi All,
Please help me to figure out how can I get the fax output for order confirmation and invoices. I have done config part necessary in the nace by creating fax output , assigning medium and all. We are able to get PDF attachment for out email output. But I am not sure what changes i need to ask abaper to make in there program in order to generate PDF for fax output.
Please give me some suggestions.
Thank you.

hi
please convey to your abaper to a Z table with a maintaince view which has to store email id of the group when ever that particular is getting triggering it has to trigger to all the group you mentioned in Z table.
or
if you are having any authrization group to which you have to trigger the mail say abaper to write a code on the group.
regards
balajia

Outputs from customs declaration

Hi guys,
Have a question. My clients wants to have this kind of output flow.
export declaration created> IDOC sent to ATLAS> inbound msg comes from atlas with approval status-->printout triggered.
How do I configure this output flow?
what is the normal output assignment that I can do for a simplified declaration from export declaration.Can you please help me with the configuration steps.
regards

Hi Subhrajit,
Please take a look at the documents available in Service Market Place for GTS, reference to your version
Path: service.sap.com/swdc --> Installations and Upgrades" -->SAP Solutions for Governance, Risk and Compliance" --> SAP GLOBAL TRADE SERVICES" --> SAP GTS XX
(XX= your version)
Regards,
Prarit
Edited by: Prarit Sehgal on Mar 27, 2009 7:00 PM

Reg:Delivery Output-

Hai,
Thanks to all for their interest to contribute/share knowledge.
Let me put my req:
I have created delivery, ( am using Packing process in delivery)
I have done packing ,its working fine.
When I take the output ( output type:LD00- delivery note) , main item & sub item ( packing item ) also appearing in delivery note.
am not sure, is it right practice to print packing item in delivery note?
( all this packing items can be printed on PL00- Packing list including Handling Unit Numbers)
Can anyone have any idea?

Dear Friend,
As you know, the Output (Print out) is generated by a ABAP program that the system calls.
All you need to do the give the requirement to your ABAPer & he would do the needful changes the Printing Program.
In the said Printing Program you can also set certain condition Customer-wise or Sales Orgn-wise. E.g. Some Customers would like to Print specific details on the print out.
To see the Printing Program use T_Cide V/83 - Enther the Output type i.e. LD00 & Application as V2 & continue. Here you can see the Smartform (Printing Program) that the system uses to Print the output.
You can also develop Customised Output & assign it in V/83.
Hope this helps...
Give points if Useful...
Thanks,
Jignesh Mehta

EXS24 - Multiple Output settings...

Hey guys,
I apologise for this question, I know it's an easy one, but I can't for the like of me remember how to do it!
All I want to do is use the Multiple Output function of EXS24 - it's a drum instrument and want to separate the tracks out to mix individually.
Help!

Hi there,
Click on the edit button above the level fader >the instrument editor window will open
There by selecting the zone that each sample is layed that zone will be highlighted...
Under the Mixer you can select the output from Group to 3-4,5-6...etc
Then you need to create some Auxiliary tracks at the Environment and assign each drum track seperately by clicking on the input of each Aux channel.... if your output assignment is correct you'll be able to see the EXS24 inst and select the outputs for each part to each aux you want it to send e.g. Kick assigned to output 3-4 >Aux 1 etc...if you're sending the output in stereo 3-4 click on the Aux Channel to be a stereo channel as well ,if not you won't see the stereo assignment but only the mono ones for that Aux.
A

Output type beside the output procedure while asigning to sales doc header?

Hi All,
T-Code v/43   (Sales Doc Header - output assignment )
Please can any one elaborate why do we need to specify output type beside the output procedure while asigning to sales doc header.
please explain me its use and significance.
thanks and regards/ashu

Hi Ashutosh,
            1. The output procedure will be one for total sales documents but if you want to assign different output types to different sales document types which are in same output procedure you can use this.
             2. You can restric the output type based on the document type.
I hope it will clear for you,
Regards,
Murali.

Please help! XML output needed for OBIEE report.

Hi,
I need an xml output of the OBIEE report. I have tried extrating the xml result using GO url but the xml format is not satisfactory. The default output assigns C0,C1..column names to each column data while on the other hand I need the name of the column and not C0 or C1.
Hence, can anyone please suggest as to how can I format the OBIEE xml output internally i.e. without doing it manually.
Please let me know if more explanation is required.
Thanks in advance!!

Hi,
Thanks for the response but unfortunately Bi Publisher is even not giving the required output.
The output of Bi Publisher is like
<_170627_>170627</_170627_>
<_TRADES_._TRADE_ID_>2996</_TRADES_._TRADE_ID_>
<_FALSE_>FALSE</_FALSE_>
<_N_>N</_N_>
<_170627_>170627</_170627_>
<_R_>R</_R_>
and the output of OBIEE is
<C0>170627</C0>
<C1>2996</C1>
<C2>FALSE</C2>
<C3>N</C3>
<C4>170627</C4>
<C5>R</C5>
<C8>B</C8>
In both the cases I get leading and trailing tags which are not required. Ideally according to the requirement C0 should have been Trade ID, C2 - Cancellation option and so on.
The BI Publisher does give the output to some ectent but lans up capturing the table name also as u see it is Trades.Trades Id. I even reuire few extra tags which caary report information and this data is not being pulled from database.
Hence please help!! I am really very much confused!!
Thanks!!!

Setting output for monitoring playback

I have FCS 2 and something that bugs me in Soundtrack Pro now is that my output for playback seems to have to be the same as for my system. I have other things going on my Mac that might generate sounds while I am working in Soundtrack Pro and don't like hearing it all while editing. I generally use my optical jack for general purpose listening but when editing I use a firewire 410 going out to either headphones or a set of monitors. Is there a way to set Soundtrack Pro to use the firewire 410 for playback without having to change my system audio output in the system preferences? The only settings I could find in Soundtrack Pro were for recording.
Thanks,
D.J.

I use a Layla 3g audio interface, 8 analog I/Os, which connects via SPDFI optical to a LavryBlack DA 10 converter. In Logic Pro to hear my audio tracks I therefore set their output to Output 9-10.
I can find no way to do this in STP. I have the Layla 3g chosen as default both in my System Prefs and in Audio Midi Setup.
If STP only allows output assignment of a track to 1-2 this is extremely lame but perhaps i simply do not know how.

Output assignment.

Similar Messages

Maybe you are looking for