Output Condition for Zebra Labels
Hello Guys,
Can i get some instructions to create Output Condition for Zebra Labels? This is the first time we are going for a Zebra printer to print labels at the time of GR. I did create new output conditions for print/fax/email in the past but never created one for labels. Label and sapscript are already created.
Thanks
Ronnie
Hi Joyce,
You can set the printing of production order automatically in the production scheduling profile (at the time of release). I do not think there is output type for printing production order.
Hope this help you.
Regards,
PSS
Edited by: PSS on Jul 22, 2009 10:36 PM
Similar Messages
-
Set up output condition for billing document.
Hi, experts,
I wanna email billing document to our customers, how can I set up this output condition for billing document?
Thanks for your help.You can maintain masterdata for the email outputs for billing application in VV31.
You can change the same or display in VV32 and VV33 respectively.
Tcode for maintaining output masterdata
For sales orders, VV11, VV12, VV13
For deliveries VV21, VV22, VV23
For invoices VV31, VV32, VV33
Reward points please!!!
Message was edited by:
Navaneetha Krishnan -
Output Conditions for Header- with Item criteria
Hi!
We want to set up the Output conditions for delivery note per storage location.
SAP has problems with reading it on the header level- as it is only on LIPS. Is there any easy workaround so it picks up the item field?
Thanks!!
Cheers
BeaHello Bea
You may be able to acheive this by doing the following:
1) Add the field 'Storage Location' (LGORT) to the filed catalog for output with the following activities:
SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/System Modifications for Output/New Fields
For Output Control
2) Then create a condition table for the new access:
SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/Output Determination/Maintain Output
Determination for Outbound Deliveries/Maintain Condition Tables
3) Then add the new condition table to the requisite access sequence:
SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/Output Determination/Maintain Output
Determination for Outbound Deliveries/Maintain Access Sequences
Please review OSS note 756688 which says that you need to 'go to the item output screen before saving the document the header output is found'.
It may be worthwhile to remain an output at item level with the same access also.
OSS note: 756688 - Access sequence with item and header fields
Hope this helps. -
How do we enable cutter option in the SAP Script for Zebra Label Printer
Hi Gurus,
We use Zebra Label(ZM400) printers to print the material documents(SAP Script). Could someone please tell me how do we enable the cutter option in the Zebra printer for the SAP Script?
Your vaulable answers will be highly appreciated.
Thanks in advance.
Regards,
Manoj.Hi Manoj,
In Script you dont want to add any logic for Label Cutter, It should be in the Zebra printer settings if the printing is over it should cut the paper. If the print area is predefined for your material label then you can make use of standard label papers (Like 2"x4", 3"x4"....)
Regards
GK. -
Transaction to maintain output conditions for material Doc
Please help me with transaction code to " maintain output condition records" for material documents
Hi,
You can use tcode NACE to almost access any area for output conditions.
MdZ -
Goods Issue output condition for extra prints
Hi All
How can i increase the standard number of GI slips for the output document.
The output is a SAP standard form (Y002)
I only need 2 output copies for a particular movement type (351)
How can i link 2 output copies for movement type 351 only
Regards
DarrenHi,
When you define the message conditions in MN21 / MN22(Change), In communication page where we enter the Logical destination there you have number of copies there you give the number and save.
Number of messages (original + copies)
Total number of copies of a message sent.
Thanks & regards,
Kiran -
Trigger Output Condition for EDI Medium
I need to trigger output for one Z Order Type which is having the medium as EDI.
I am aware of FM WFMC_MESSAGE_SINGLE which could trigger output for print medium (Doesn't work EDI medium 6) .
I need a similar FM but for EDI.
Thanks
AnandHi
Check the following fun Modules
WFMC_MESSAGES_SELECT_PA
WFMC_MESSAGES_EXTEND
WFMC_MESSAGES_PROCESS
WFMC_MESSAGES_SELECT
WFMC_MESSAGES_SELECT_ALL_FALSE
WFMC_MESSAGE_SINGLE_NO_UPDATE
WFMC_MESSAGE_SINGLE_SCREEN
Reward points for useful Answers
Regards
Anji -
Hi Sapfans,
We created one form in PDF-based forms for print in Zebra printers. This form has ZPL code.
After we have created in SAP one output device for this printer with all steps of the note 685571, XDC file AZPL203.
Now, when I run this form for one laser printer, we don't have any problem, if I choose the output device for zebra, I have the below error message:
ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
Message no. FPRUNX001
I have tested other forms with others printers, run without errors. So my ADS definitions and connections seems to be ok.
Can you help me on zebra output device???
All ideas/comments are welcome.
Ana MoreiraHey
Have you solved the problem by now???
Please post any solution if you have one
Thanks ahead
Eyal -
Zebra Label Printing - DPI issue.
Hi Guru's,
I have a script for Zebra label printing. its an old script working fine. Now the issue is:
The above script is printing labels for 200 dpi printers as per the requirement.
Now one of the Markets have purchased 300 dpi printer. When the print the same label using the new printer using the script, they are getting the Label compressed.(i.e.. the Script is now much smaller and aligned to the left top corner, no data is missing but the Lettering is compressed and not occupying the total space alloted on the label).
I have chcked the manual for Zebra label printers, but could not solve my issue. Can any one of u help me. Thank you.
Here is extract of script used for initialisg the label:
/: NEW-PAGE
/ ^XA
/ ^PW1200
/ DFI128FS
/ ^PRC
/ LH0,0FS
/ ^LL1500
/ ^LT12
/ ^MD0
/ ^MNY
/ CW1,B:CGTRI_NCW2,B:CGTRI_ICW3,B:CGTRI_BCW4,B:CGTRI_J^CW5
= ,B:CGTRCO_NCW6,B:CGTRCO_ICW7,B:CGTRCO_J
/ LH0,0FS
Can anyone of you check this code & tell me where exactly the 'DPI' issue is handled in the script. Also any additions to the above script to acheive the solution....
regards,
Chaitanya LHi Balakrishnachaitanya,
i've made just a couple of sapscript whit the ZPL language, and i dont't think that you can set the DPI of print,
maybe you have to set the printer' settings.
Regards,
Davide -
MN04. Output condition record
I need to uplaod Output conditions for PO into sap in MN04 tcode Using LSMW / BAPI.
What will be the best method? Is there any BAPI avaliable for this?how u did handle the table control?
Edited by: Gautam Totekar on Jun 22, 2010 11:52 PM -
Create/Change output conditions - sales VV11
Hi all,
I just want to know is there any BAPI or function module to create/change the output conditions for sales (VV11, VV21, VV31).
Thanks in advance.
PranavHi Pranav,
I am providing you a [List of BAPI's|http://mysap.wordpress.com/2008/07/29/list-of-bapis/]. Please search them according to your requirement.
Regards,
Swapna. -
SAP Script : Control Commands for printing Label (barcode) by Zebra Printer
Hello,
I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
Sample script code:
Initialization and reset Barcode
XAMCY^XZ
Start
^XA
Barcode setup
^BY3,2.7,2.2
Set label home position
^LH
^FWN
FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
FO385,725A0R,40,50FD&VBAP-ARKTX&FS
FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
^XZ
Thanks in Advance,
RamasamyHI
GOOD
GO THROUGH THIS
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
GO THROUGH THESE LINKS
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
THANKS
MRUTYUN -
Maintain output condition table for billing documents
Hi
I need to create new output condition table for billing document with the key combination of "Billing type and Export Indicator". In Field catalog: Messages for billing documents I am able to find field Export Indicator but the same field i am not able to find creation of new condition table (V/63).. Kindly let me know is there any settings required to show the same in V/63.
Thnaks
SrinivasHi Ram
The filed already is there in in structure" KOMKBV3" ....
Thanks
RAO -
Output device for output condition record
How can i make an output device a required entry when creating a new output conditon record?
Example: When going into VV31 and setting up new output condition record, I am trying to force user to specify an output device.
Can some one let me know if it is possible to do?
Thank you.Hi
Write a Field Exit for that field
and trigger a error when it is not filled , such that the user always enters it.
Reward points if useful
Regards
Anji -
Maintain output condition record for KONS
Dear all friends,
Anybody help me to maintain output condition record for KONS during consignment cycle.
when,where and how i can maintain the output condition record for KONS
thanx in advance.
best regards,
Rajeshuse MRM1 t-code for KNOS.
Maybe you are looking for
-
Excel Sheet Upload: Program reads file for a long time
Hi All, I'm using the function modules GUI_UPLOAD and TEXT_CONVERT_XLS_TO_SAP to upload data from an excelsheet on the presentation server into a table in SAP. The call to the TEXT_CONVERT_XLS_TO_SAP function takes too long. The task bar says "Conver
-
Can i use the lightning to usb camera adapter for sony cybershotdsc-w380
DDoes anyone know how to use a lightning to sub camera adapter for a Sony cyber shot doc-w830
-
Hi all, Can anyone tell me what is the use of findObject() method can i use it to find and replace actual pageItems. Thanks
-
Duplicate table and Alias Table
Hi, What is the Differnce between duplicate table and Alias table?which Situation we use these table ? Plz tell me . Thanks
-
ITunes 10.5.2(11) Podcast Download Trouble
I upgraded iTunes to 10.5.2(11) and I am having trouble downloading podcasts. The downloads all start but stall and never complete. I rarely get any errors from itunes, but, occasionally I will see one that indicates a firewall issue. To make sure, I