Output Control and Copy Control

I have the following problem.
My client has a copy control for transfering data from a quotation to a different type of quotation. The quotation (old one) has a sold-to-party and a ship-to-party. These two partners are copied to the new quotation. If for any reason the ship - to - party is changed, then while printing an output for the quotation, the old ship - to - part is being printed.
What should I do?

Hi Stilianos,
Please go to NACE t-code and check your output condition records regarding of your access sequence and output type.  condition record may effect your ship-to  like your problem.
Moreover, check your routines maintained properly your copy control partner item routine and copying requirement to your copy control item level from SD>Sales and distribution>Sales>Maintain Copy Control for Sales Documents > Copying control: Sales doc to sales doc.
I hope these will be helpful for your issue. Additionally, please share with us the progress about it.
Regards,
Sinan

Similar Messages

  • Controlling and Ent Controlling Settings in R/3 before activation of DS

    Hi GURUS,
    I have been asked to activate the Controlling and Enterprise controlling DS in R/3. Please let me know what are all the settings I need to do before activating DS for Controlling Module.
    Would definitely assign points and requesting you to explain it step by step. Thanks in advance.

    Hi GKKR,
    For Payroll Setting See SAP Note 697225 - Revisions to the DS 0HR_PY_1 for PlugIn 2004.1
    Please look at thread
    Data load problem in Payroll Cube - BW 3.5
    Also look at SAP Notes - 672514,964569,397208,329961 for problems.
    <u>For Time Management</u>
    Set Up Customer Enhancement
    You can use a SAP enhancement to access a Customer Exit. A customer exit will complete the info source fields with data you specify for the Personal Work Schedule Hours 0HR_PT_01 during the data transfer.
    See the documentation available on the customer exit before carrying out this step. Choose the "Utilities" menu option to access the online manual.
    Requirements
    To use the customer exit successfully, you should have sufficient knowledge of the ABAP programming language. You can insert your own coding at specific points in the program that are reserved for this purpose, however, SAP does not offer service or support for the content of your coding. Any data that you make available to the application using the defined interface is stored consistently in the R/3 System. If data cannot be processed correctly in the system, the data is ignored.
    Standard Settings
    The customer exit is not activated in the standard R/3 System.
    Activities
    1. Create an enhancement project.
    2. Assign the enhancement HRPTDW01 to this project.
    3. Edit the customer exit EXIT_SAPLHRMS_BIW_PTDW_001.
    4. Document your project (provide long text).
    5. Activate the project. Your enhancement must be activated before it takes effect.
    Further Notes
    When maintaining the customer exit, insert your coding in the Include ZXPTDWU01. Enhancements, in contrast to modifications, are basically independent of release. Enhancements are not made in the standard R/3 System but in a name range specifically reserved for customers.
    For more information on SAP enhancements, see the documentation on HRPTDW01 Time Data Extractor: Customer-Specific Fields.

  • Difference between data control and grid control

    Hello, All:
    When I installed my 10g database, the OEM data control was also installed, I can use it to manage my database perfectly. now I see there is a seperate product for OEM grid control that need to be installed from different CD, Can someone tell me what's the difference between this Data Control and Grid Control?
    Thanks in advance

    DBconrtrol is for monitor only one database but from Enter prise manager Grid Control you can monitor and manage all the database in your enterprise basically
    Oracle Enterprise Manager Grid Control is a single, integrated product for monitoring and managing Oracle software infrastructure as well as applications and business services in diverse IT environments

  • Run Singlular Database Control and Grid Control Agents at the same time????

    Hello,
    I have walked into a new job where one of my 1st tasks is installing and configuring EM Grid Control version 10.2.0.3. Most of the individual databases already have singular EM/Database Control also set up for basic monitoring - some are 10.2.0.1 databases; some are 9.2.0.7 databases.
    Can I continue to run the existing singular EM Database Controls for monitoring and managing the databases while I am getting connected, the new agents up and running, and the Grid Control templates and alerts and notification fully set up?
    Or will I have to shut down those agents fully prior to installing the new 10.2.0.3 agents???
    I am hoping so since they use different communication ports of 1158 for the singular Database Controls versus 4889 for Enterprise Wide Grid Control.
    Thanks for any help in clarifying this.
    KL

    OK, so as long as I keep the homes separate & straight, I could conceivably allow them both (Database Control and Grid Control Agent) to run AND be used at the same time - even when using secured grid control (https), correct? Just have the separate homes for separate agents and use separate ports for the different consoles?
    Of course I might still run into an issue with this, ass I am also in the process of securing Grid Control... The current Database Console used by the app users to monitor is NOT an https url...
    The real reason for this is because some app users are used to using the EM Database Control for application monitoring. I would like to not take that away from them while I am in the process of setting up all of the users, roles, alerts, groups, etc. on Grid Control.

  • Diference between view controler and navigation controler

    Hello,
    please what is the diference between view controler and navigation controler.
    Thank you for your answer

    a Navigation Controller is a Subclass of a View Controller. It has some additional Functionality. Please read the Apple Documentation for further information
    https://developer.apple.com/library/ios/#DOCUMENTATION/UIKit/Reference/UINavigat ionController_Class/Reference/Reference.html
    https://developer.apple.com/library/ios/#DOCUMENTATION/UIKit/Reference/UIViewCon troller_Class/Reference/Reference.html

  • Controlling and Enterprise controlling

    Hi Experts,
    Could anyone of you explain me  the difference between Controlling and Enterprise Controlling?
    Thanks..
    Jyothi

    Hi,
    Controlling:
    Controlling provides you with information for management decision-making. It facilitates coordination, monitoring and optimization of all processes in an organization. This involves recording both the consumption of production factors and the services provided by an organization.
    As well as documenting actual events, the main task of controlling is planning. You can determine variances by comparing actual data with plan data. These variance calculations enable you to control business flows.
    Income statements such as, contribution margin accounting, are used to control the cost efficiency of individual areas of an organization, as well as the entire organization.
    check this link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/1e/e9293504e1fd77e10000009b38f889/frameset.htm
    Enterprise Controlling :
    The following sections describe the single roles for the component Enterprise Controlling (EC).
    1.Consolidation (EC-CS)
    2.Profit Center Accounting (EC-PCA)
    check this link:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/6a/df293581dc1f79e10000009b38f889/frameset.htm
    Thanks,
    Rau

  • Differences between EM Database Control and Grid Control/Cloud Control

    Hi everybody,
    just a short question: To show my colleagues and my boss, which one is the better one I would like to have a view about what the differences between Database Control and Cloud Control Versions of EM are and which functions would like the monitoring work more comfortable for us DBA's. Does anybody know a link or document for that?
    Thanks a lot!
    Regards,
    David

    Is this the own advantage of between Cloud Control and DB Control, that Cloud Control can monitor more than one instance?Someone that are using Grid control will tell you that it is a great avantage.
    We've just one database instance. But I've read about SNMP functions, that are only supported in Cloud Control. Are there more advantages?if you only have one database instance, Enterprise Manager is your best way at this moment.
    At some time, for example when 12g arrives, will Cloud Control be the standard installation?for the moment...nobody knows what is coming with 12c database...

  • What are the uses of table control and tabstrip control

    can anyone tell me the uses of table control and tabstrip control

    Hi,
    table control is more comfortable for customizing.scroll bars all possible in this.where as it is not possible in step loops.
    check this example.
    PROGRAM ZBHTCTRL.
    TABLES: LFA1, EKKO.
    DATA: OKCODE1 LIKE SY-UCOMM,
    OKCODE2 LIKE SY-UCOMM.
    CONTROLS TABC TYPE TABLEVIEW USING SCREEN 1001.
    DATA: BEGIN OF ITAB OCCURS 0,
    MANDT LIKE EKKO-MANDT,
    EBELN LIKE EKKO-EBELN,
    BSTYP LIKE EKKO-BSTYP,
    BSART LIKE EKKO-BSART,
    END OF ITAB.
    MODULE USER_COMMAND_1000 INPUT.
    CASE OKCODE1.
    WHEN 'BACK'.
    SET SCREEN 0.
    WHEN 'NEXT'.
    SET SCREEN 1001.
    SELECT * FROM EKKO INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE
    LIFNR = LFA1-LIFNR.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_1001 INPUT
    MODULE MOVE_DATA OUTPUT.
    EKKO-MANDT = ITAB-MANDT.
    EKKO-EBELN = ITAB-EBELN.
    EKKO-BSTYP = ITAB-BSTYP.
    EKKO-BSART = ITAB-BSART.
    ENDMODULE. " MOVE_DATA OUTPUT
    MODULE USER_COMMAND_1001 INPUT.
    CASE OKCODE2.
    WHEN 'BACK'.
    SET SCREEN 1000.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_1001 OUTPUT
    MODULE STATUS_1001 OUTPUT.
    SET PF-STATUS 'MENU'.
    SET TITLEBAR 'TIT'.
    ENDMODULE. " STATUS_1001 OUTPUT
    MODULE STATUS_1000 OUTPUT.
    SET PF-STATUS 'DMENU'.
    SET TITLEBAR 'xxx'.
    ENDMODULE. " STATUS_1000 OUTPUT
    FORM ON_CTMENU_FORM1 USING CMENU TYPE REF TO CL_CTMENU.
    CALL METHOD CMENU->LOAD_GUI_STATUS
    EXPORTING
    PROGRAM = ' ZBHTCTRL'
    STATUS = 'CMENU'
    MENU = CMENU.
    CALL METHOD CMENU->ADD_FUNCTION
    EXPORTING
    FCODE = 'RX'
    TEXT = 'RECIEVE'.
    ENDFORM.
    FLOW LOGIC:
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_1000.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_1000.
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_1001.
    LOOP AT ITAB WITH CONTROL TABC CURSOR TABC-TOP_LINE.
    MODULE MOVE_DATA.
    ENDLOOP.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_1001.
    LOOP AT ITAB.
    ENDLOOP.
    for more info check this link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
    thanks
    Ashu.

  • My mouse now has 2 modes. I must constantly reset it (open/close StartMenu) between webpage control and Firefox control. How to fix?

    Once a Firefox control (toolbar button, URL entry, Searchbox Entry) is invoked, the mouse will no longer operate in the web window (other than moving around) or move scroll bars. Can't select anything, enter data, click links, etc.
    To switch to the "other mode", it's necessary to "reset" by opening/closing Windows Start Menu.
    In this "mode", it's not possible to use Firefox controls (Toolbars, Back/Forward, URL addressing, Search Box entry) without performing the same "reset" procedure.
    Once "reset" it's possible to do anything once but whatever is done will "set" the mode in 1 of those 2 modes where it will remain until the next5 time the start menu is opened/closed.
    Using drop-down menus in webpages (like this one) requires that the choice in the drop menu be selected using up/down arrows and [Enter] key. The mouse will drop the menu, but will not "select" the chosen item.

    As it turns out I didn't find the cause of this issue as the next day the issue came back when I restarted my MBP.
    Two days later I have found a working solution so I can limp back to Australia in a month's time, but continue working.
    If I start my MBP (with the Shift stuck) it wires 6GB or RAM just at start up and I have to disable the keyboard via terminal (sudo kextunload /System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyb oard.kext/) and then use an external USB keyboard. Very annoying to say the least.
    My solution is during restart press the Control and Option keys so that they override the start up with Shift function in OSX. When I attempt to log in I the shift is still stuck so normally my password wouldn't work (so I have changed my password to one that will). Once logged in the Shift is no longer stuck although the Left Shift key does not work so typing takes an extra few hundred milliseconds to use the Right Shift for all capitals (annoying but bareable).
    Not an ideal situation, but it is workable until I can get it fixed.

  • Modpool Tabstrip control and Table control

    Hi All,
    pls mail me step by step procedure fo rmodule pool programming using Table control and Tabsrip.
    Thanks in Advance.

    hi,
    check the below links
    http://www.sapgenie.com/abap/example_code.htm
    http://www.sap-img.com/
    http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
    http://www.sapgenie.com/links/abap.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
    http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
    check these links
    http://www.allsaplinks.com/dialog_programming.html
    http://sappoint.com/abap.html
    http://www.sap-img.com/abap.htm
    http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
    http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
    http://www.sap-img.com.
    http://www.sap-img.com/abap/
    http://sap.mis.cmich.edu/sap-abap/abap09/
    http://www.sapbrain.com/TUTORIALS/default.html
    steploops
    http://help.sap.com/saphelp_nw04/helpdata/en/d1/801c13454211d189710000e8322d00/content.htm
    http://sap.niraj.tripod.com/id28.html
    If you need further info on this shoot me a test mail to [email protected] i will farward the material to you
    If you find it useful mark the points
    Regards,
    Naveen

  • VGA output problem and catalyst control start up link

    I do not know whether the problems are linked or whether I have made things worse.  It started with an error message on start uo saying that there was a problem with Catalyst Control failing to start.  It still alowed me to run normally until, in front of an audience, the VGA o/p link to a projector did not work.  I had a spare cable which did not remedy the situation so my class sat around the laptop.
    Another symptom is that the HDMI output does not work.  I do not ko wif this is a separate issue.
    With the notion that this was linked I set about attemping to delete and reinstall AMD drivers and blindly assumed this was where I would get the Cat Control update.
    I used AMD's compatability checker and installed for display adapter  AMD M880G with ATI Mobility Radeon HD 4250.  The driver version is 8.770.2.1000 dated 19/09/2010 
    I cannot duplicate the display or use projector only however when I attach an external monitor the laptop changes resolution as if to accommodate the additional display.
    I either need help to verify the applicability of the changes that I have made or I need help to plan a way out of the mess that I have made.

    Hello @g_david,
    I have read your post on how the Catalyst Control Center program is not working very well on your computer, and that you are not able to view your display on your HDMI connected monitor. I would be happy to assist you in this matter!
    To ensure that your graphics drivers are working correctly, I recommend installing the original software and hardware drivers that first came with your notebook. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). Once installed, please follow this resource on Using HP Support Assistant (Windows 7) to update the drivers on your system.
    If you are able to successfully use the Catalyst Control Center again, the next step is to re-connect the monitor to your computer using an HDMI cable. To do this, please follow the steps in this document on Troubleshooting HDMI display and sound issues. 
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Org data determination and copy control

    Experts,
    I have a scenario where service orders are created automatically form a service contract.  The same service order can also be created manually.
    Org determination in service contract is based on the Sold-to-party.
    Org determination in service order is based on the ship-to- party.
    When service order are manually created - org data is determined based on ship-to-party  -
    But when automatically created form Service contract the Org data is copied from Service contract.
    Or  how can I redetermine the org data in the service order??????????
    Thanks and Regards,
    Ram

    Thanks for the reply guys,
    The service order is determining the Org data as expected using the Org data profile and parter function for org values assigned to the the transaction type.  This is working as assigned for manually created service orders. This is not the problem.
    But when the same service order is automatically created from a Service contract -- Org data is copied form Service contract.
    I want it to be determined as it happens when they are created manually.
    Any thoughts...
    Thank you
    Ram

  • Item Category Completion rule and Copy Control for contract reference

    Hi
    We are creating sales document wrt contract. The item category completion rule for item category WVN is C i.e. item is completed after target quantity is fully referenced.
    We dont want to change this but we want that even if the target quantity is fully referenced one particular type of sales document should still be allowed to be created with reference to this contract.
    Please guide how can I achieve this.
    Thank You
    Brajendra Shrivastava

    Hi
    Is it possible to remove the item category completion rule and then restrict one particular document type or item category for only one time reference . In other words to apply completion rule at document type or tiem category level.

  • My ActiveX Controls that i downloaded (APTLaser Control and APTTEC Control) are not showing up

    I got a new computer and im trying to bring over all of my files from my previous computer, however after downloading everything i was unable to use my ActiveX controls for the above objects. When i try to reinsert the object, they are not there, how to i bring in new controls to insert into the ActiveX container? Labview
    -Danny

    Hi zhuangd1,
    Did you try registerin the  ActiveX control manually, as described here?
    Cheers!
    TJ G

  • Perspective Control and Distortion Controls in Camera Raw

    I love ACR 4.1. Thanks for a fine product.
    For a future release of ACR, is it beyond the bounds of possibility to include the Perspective, Vignette and the Distortion controls directly into ACR?
    Thanks

    >PTLens will get all the info from the EXIF data to select the right camera/lens/FL combo
    The Exif data contains only the actual focal length and the maximal aperture value of the lens. These are not enough to identify the lens.
    The MakerNote tag may or may not contain some more lens related information, but
    1. in most images this is not present (it is not part of the Exif tags),
    2. the structure of that data is not published,
    3. there is a DNG tag, LensInfo, Adobe's DNG converter creates this tag from the MakerNote, but it contains only the min/max focal lengths and the respective max. apertures. This is still not enough to identify the lens, apart from the fact that the max aperture values are not filled for example in case of Canon lenses and Tamron/Sigma lenses on Canon body (I can state this with certainty only re Canon 20D and 1DsMarkII). Nikon's D100 and D2X shows the max. aperture values.
    4. all this is still not enough to identify the lens.

Maybe you are looking for