Output Detemeination type for VT02N
Hi Gurus,
I have smartforms and on the basis of output type i need to print different smartforms.
Please advise for same.
Regards
Hi Venkateshwarlu ,
Thaks for reply,
SPRO>Logistics Execution>Shipping>basic functions>output control>Output Determination>Maintain Output Type .
Is that path ok??
There are some parameters already defined for same Under papplication V6 like MALB - Material Label etc..
so where we need to defined our smartforms name for particular output type like ALTR ..etc.
Regards,
Similar Messages
-
Creation Output Message Type for Scheduling Aggrement
Hi,
Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
Regards,
PankajHi,
Output determination process for Scheduling aggrement.
SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
1)First create condition table based which becomes condition record for accessing the data.
2)Create access sequence to access the data or search the based on the conditoin record in sequence of the condition table.
3)Define your message type like print,fax etc.
Maintain the conditon record for the MN07 for the output type which new one you created.
Regards
Ravi Shankar. -
Naive Bayes Training - CLOB as output data type for JSON string?
Hello everyone,
My training model outputs a large JSON string that doesn't fit into one row, so the string is split across multiple rows. Default - or only possible output data type for that matter - is varchar according to the official documentation on PAL. Is there any chance I could use CLOB for the output?
Regards
HenryThe property you provided is for applying an NB model, not for building one.
For build, you should have used Sample_NaiveBayesBuild property file.
I ran the NB apply sample program with your property, and was able to get past the point where you have problem.
Please double check if you really used the property you provided and if it matches to the program you wanted to use. -
Message output condition typ for PO not getting defaulted during PO create
Hi,
I have created a ZNEU output type for purchase order print out for ZNB purchase document type by copying the stndard NEU output type ,
I have mainatined the condition record in NACE for ZNEU out put type against the Purchase docuemnt type ZNB, but when i create a PO and save i am not getting the ZNEU message output type as default in PO,
Kindy provide your valuable input.
My requirement is to default z output type in POHi
SPRO-MM-Purchasing-messages-ouput control-message type-define message type for PO-Fine tuned control PO
Here you can define which message type needs to be defaulted
Regards
Sandeep -
Hi,
The following code works perfectly for me and give me a list of users for a specific OU and their respective logon types :-
$logFile = 'c:\test\test.txt'
$_myOU = "OU=ABC,dc=contosso,DC=com"
# LogonType as per technet
$_logontype = @{
2 = "Interactive"
3 = "Network"
4 = "Batch"
5 = "Service"
7 = "Unlock"
8 = "NetworkCleartext"
9 = "NewCredentials"
10 = "RemoteInteractive"
11 = "CachedInteractive"
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0""
or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>" -ComputerName
"XYZ" | ForEach-Object {
#TargetUserSid
$_cur_OU = ([ADSI]"LDAP://<SID=$(($_.Properties[4]).Value.Value)>").distinguishedName
If ( $_cur_OU -like "*$_myOU" ) {
$_cur_OU
#LogonType
$_logontype[ [int] $_.Properties[8].Value ]
#Time-created
$_.TimeCreated
$_.Properties[18].Value
} >> $logFile
I am able to pipe the results to a file however, I would like to convert it to CSV/HTML When i try "convertto-HTML"
function it converts certain values . Also,
a) I would like to remove duplicate entries when the script runs only for that execution.
b) When the script is run, we may be able to search for records after the last run and not search in the same
records that we have looked into before.
PLEASE HELP !If you just want to look for the new events since the last run, I suggest to record the EventRecordID of the last event you parsed and use it as a reference in your filter. For example:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[(EventID=4624 and
EventRecordID>46452302)]]</Select>
<Suppress Path="Security">*[EventData[Data[@Name="SubjectLogonId"]="0x0" or Data[@Name="TargetDomainName"]="NT AUTHORITY" or Data[@Name="TargetDomainName"]="Window Manager"]]</Suppress>
</Query>
</QueryList>
That's this logic that the Server Manager of Windows Serve 2012 is using to save time, CPU and bandwidth. The problem is how to get that number and provide it to your next run. You can store in a file and read it at the beginning. If not found, you
can go through the all event list.
Let's say you store it in a simple text file, ref.txt
1234
At the beginning just read it.
Try {
$_intMyRef = [int] (Get-Content .\ref.txt)
Catch {
Write-Host "The reference EventRecordID cannot be found." -ForegroundColor Red
$_intMyRef = 0
This is very lazy check. You can do a proper parsing etc... That's a quick dirty way. If I can read
it and parse it as an integer, I use it. Else, I just set it to 0 meaning I'll collect all info.
Then include it in your filter. You Get-WinEvent becomes:
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624 and EventRecordID>$_intMyRef)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0"" or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>"
At the end of your script, store the last value you got into your ref.txt file. So you can for example get that info in the loop. Like:
$Result += $LogonRecord
$_intLastId = $Event.RecordId
And at the end:
Write-Output $_intLastId | Out-File .\ref.txt
Then next time you run it, it is just scanning the delta. Note that I prefer this versus the date filter in case of the machine wasn't active for long or in case of time sync issue which can sometimes mess up with the date based filters.
If you want to go for a date filtering, do it at the Get-WinEvent level, not in the Where-Object. If the query is local, it doesn't change much. But in remote system, it does the filter on the remote side therefore you're saving time and resources on your
side. So for example for the last 30 days, and if you want to use the XMLFilter parameter, you can use:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[TimeCreated[timediff(@SystemTime) <= 2592000000]]]</Select>
</Query>
</QueryList>
Then you can combine it, etc...
PS, I used the confusing underscores because I like it ;)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
PO Output message types for different document types
Hi,
I wanted the system automatically generate the messages whenever a PO is created for different document types like NB,UB,Blanketorder, Pilot run.
These are the steps i did...plz advice any more steps to make this work
1. the output type I am using is NEU-purchase order
2. I have created condition records for document types NB,UB,PR etc
I was sucessfull in getting the messages automatically for the standard(NB) PO..but not for the other document types
Plz advice me how I can achieve this with further configurations
Thanks
SKidIf you have created conditin record for all the document type in MN04 then it should work becuase doc type has nothing to do for printing config.
this is basically a condition record.
check your condition record -
Best output file type for further editing
Hi - I was hoping someone could help me with this. I'm making shots which composit various source material (cgi, still images, video from a Canon 7D, etc) which I intend to then edit in premiere for a final output which is as lossless as possible. The trouble is shots which are even a few seconds long render out at several Gb (thus making the final edit enormous - 30Gb+ for two minutes of footage).
I started outputting with quicktime (animation codec) but was advised to switch to targa sequences but these are pretty huge as well.
What would be the recommended output for most lossless quality?
Thanks in advanceWelcome to the world of video compositing, where quality and file size go hand in hand. I'm working on a project today that is a 7 minute promo video, and the current job folder is just under 1 Terabyte. If you are serious about quality work in this field you need plenty of hard drive space. Hard drives are ridicuously cheap these days - I can buy an uncased 2TB drive for about $80, or a USB 3 2TB for $95ish.
Quicktime Animation, Quicktime PNG and Uncompressed are common intermediate formats. Apple users also commonly use Pro Res formats, and the Apple Intermediate Codec. -
PO Output message triggering for change in PO
Hi,
We have configured a output message type for PO create . The output message is defiend for condition record doc type, partner as LS and medium A(ALE) and partner name.
Once PO is created the output is getting triggered and idoc created.If I make any changes in PO agai the same output message type si getting triggered and new idoc created. This shud not happen.
I checked , the idoc message type ORDERS n its assigned to only ME10 code .
Cheked all the settings of message type and fine tuned is also not maintaiend.
Please suggest .Hi
under SPRO > MM > Purchasing > Messages > Output Control > Message Types > Define Message Types for Purchase Order > Fine-Tuned Control: Purchase Order - check whether your output type is added with operation 2 (change)
Thanks !
E.Avudaiappan -
Update LIKP table while saving the output type in VT02N transaction
Hi All,
I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.This could be a result of one of the following reasons:
1: Incorrect smart form/routine assigned in the output configuration (NACE)
2: Serial number range of the delivery expired
3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
Hope this is helpful
Manish -
Output type for tcode : F150
Hi ,
I am working with customer dunning letter - tr. F150
I want to attach a modified zform to it .
( acopy of standard dunning into z with some layout changes )
How to configure it / what is the output type for it / what is the application type for dunning form?
Regards
RajeshHi,
Assign in the IMG (SPRO) menu....
Financial Accounting
Account Receivable and Accounts payable
Business transactions
Dunning
Printout
All req configuration is done here...
Regards
Stu -
Delivery Schedule output type for change
Hi all,
i have created a custom output type for delivery schedule. i am using this output type to send IDoc. For create it is working fine. i have maintained condtion record as well.
whenever the delivery date and qty is changed, change output type is triggered but it fails there. the error shows no IDoc could be generated as there are no changes releveant to that.
i checked the configuration field relevant to printout changes, in that for table EKET-EINDT and menge i have checked the scheduling agreement. but here i could not find delivery schedule.
Can you please help on this..
ThanksHi
You need to confiugre output determination. Please check the below link.
Re: Email output of PO
output determination
Regards
Antony -
Is there a way to change the output type for Email Remittance Program?
Hello,
We are trying to implement Separate Remittance Program.The seeded output type is PDF( I have checked the output type for send separate remittance concurrent program) however the
email which we receive looks like a regular email I mean with a normal text . Is there a way to get the output in different type like excel,attachment,pdf.
Any inputs would be highly appreciated.
Thanks,
SushmaCurrently there is a bug raised
Bug 8208646 : R12 UNABLE TO SEND SEPARATE REMITTANCE ADVICE AS EMAIL ATTACHMENT IN PDF.
If you want to customize this process you need to create data definition,new rtf template and bursting program to send pdf as attachment. -
Output type for the managed codes cut letter is hard coded
Hello,
Very Good afternoon!
I have a requirement to create new Output Types for a Smart Form.
The already existing Output types are hard coded as shown Below :
CONSTANTS : c_kschl_order LIKE nast-kschl
VALUE 'ZUS0',
c_kschl_order1 LIKE nast-kschl
VALUE 'ZUS1',
Now they do not want to use ZUS1. Insted they wnat to use New Output Types.
u2022 Remove ZUS1 as we no longer use this one.
u2022 Add ZAU0
u2022 Add ZNZ0
u2022 Add ZJP0
u2022 Add ZCN0
u2022 Add ZKR0
How to add these Output types without Hardcoding as shown ABove.
Any Suggestions will be appreciated.....
For reference..I will paste the code of the Program here.
Here is the code :
PROGRAM DECLARATION
PROGRAM ID Z_RVADOR01_SALES_CUT_LETTER
TABLES: vbak, "Sales Document: Header Data
vbap, "Sales Document: Item Data
vbpa, "Sales Document: Partner
vbep, "Sales Document: Schedule Line Data
kna1, "General Data in Customer Master
MARA, "Material Master
KOMK, "Communicationarea for conditions
KOMP, "Communicationarea for conditions
KOMVD, "Communicationarea for conditions
VBCO3, "Communicationarea for view
VBDKA, "Headerview
VBDPA, "Itemview
VBDPAU, "Subitemnumbers
CONF_OUT, "Configuration data
SADR, "Addresses
TVAG, "Reason for rejection
VEDKA, "Servicecontract head data
VEDPA, "Servicecontract position data
VEDKN, "Servicecontract head notice data
VEDPN, "Servicecontract pos. notice data
RISERLS, "Serialnumbers
KOMSER, "Serialnumbers for print
TVBUR, "Sales office
TVKO, "Sales organisation
ADRS, "Communicationarea for Address
FPLTDR, "billing schedules
WTAD_ADDIS_IN_SO_PRINT, "additional
WTAD_BUYING_PRINT_EXTRA_TEXT, "texts belonging to additional
adrc,
adr6,
t247.
INCLUDE RVADTABL.
INCLUDE RVDIREKT.
INCLUDE VEDADATA.
data for access to central address maintenance
INCLUDE SDZAVDAT.
TYPE-POOLS: ADDI.
DATA PRICE_PRINT_MODE(1) TYPE C. "Print-mode
DATA: RETCODE LIKE SY-SUBRC. "Returncode
DATA: REPEAT(1) TYPE C.
DATA: XSCREEN(1) TYPE C. "Output on printer or screen
DATA: BEGIN OF STEU, "Controldata for output
VDKEX(1) TYPE C,
VDPEX(1) TYPE C,
KBKEX(1) TYPE C,
KBPEX(1) TYPE C,
END OF STEU.
DATA: BEGIN OF TVBDPA OCCURS 0. "Internal table for items
INCLUDE STRUCTURE VBDPA.
DATA: END OF TVBDPA.
DATA: BEGIN OF TKOMV OCCURS 50.
INCLUDE STRUCTURE KOMV.
DATA: END OF TKOMV.
DATA: BEGIN OF TKOMVD OCCURS 50.
INCLUDE STRUCTURE KOMVD.
DATA: END OF TKOMVD.
DATA: BEGIN OF TVBDPAU OCCURS 5.
INCLUDE STRUCTURE VBDPAU.
DATA: END OF TVBDPAU.
DATA: BEGIN OF TKOMCON OCCURS 50.
INCLUDE STRUCTURE CONF_OUT.
DATA: END OF TKOMCON.
DATA: BEGIN OF TKOMSERVH OCCURS 1.
INCLUDE STRUCTURE VEDKA.
DATA: END OF TKOMSERVH.
DATA: BEGIN OF TKOMSERVP OCCURS 5.
INCLUDE STRUCTURE VEDPA.
DATA: END OF TKOMSERVP.
DATA: BEGIN OF TKOMSERVHN OCCURS 5.
INCLUDE STRUCTURE VEDKN.
DATA: END OF TKOMSERVHN.
DATA: BEGIN OF TKOMSERVPN OCCURS 5.
INCLUDE STRUCTURE VEDPN.
DATA: END OF TKOMSERVPN.
DATA: BEGIN OF TKOMSER OCCURS 5.
INCLUDE STRUCTURE RISERLS.
DATA: END OF TKOMSER.
DATA: BEGIN OF TKOMSER_PRINT OCCURS 5.
INCLUDE STRUCTURE KOMSER.
DATA: END OF TKOMSER_PRINT.
DATA: BEGIN OF TFPLTDR OCCURS 5.
INCLUDE STRUCTURE FPLTDR.
DATA: END OF TFPLTDR.
DATA: TADDI_PRINT TYPE ADDI_SO_PRINT_ITAB WITH HEADER LINE.
TYPES:BEGIN OF ty_orders ,
xblnr LIKE mkpf-xblnr, "delivery number
erfmg LIKE mseg-erfmg, "goods issue quantity
custname LIKE kna1-name1, "customer name
bstnk LIKE vbak-bstnk, "purchase order number
ean11 LIKE vbap-ean11, "upc
kdmat LIKE vbap-kdmat, "customer material code
arktx LIKE vbap-arktx, "description
csrno LIKE kna1-kunnr, "customer service rep number
spras LIKE kna1-spras, "customer language key
csrname LIKE kna1-name1, "customer service rep name
csremail LIKE adr6-smtp_addr, "csr email
csrphone LIKE kna1-telf1, "csr telephone
csrext LIKE adrc-tel_extens, "csr extension
csrfax LIKE kna1-telfx, "csr fax
total LIKE lips-lfimg, "cut quantity
ldate(18) TYPE c,
END OF ty_orders.
CONSTANTS: c_kschl_order LIKE nast-kschl
VALUE 'ZUS0',
c_kschl_order1 LIKE nast-kschl
VALUE 'ZUS1', c_parvw_shipto LIKE vbpa-parvw
VALUE 'WE',
c_parvw_csr LIKE vbpa-parvw
VALUE 'ZS',
c_eng(1) TYPE c VALUE 'E',
c_sep(1) TYPE c VALUE '/',
c_sale(25) type c VALUE 'Sales Order'.
DATA: WA_VBAK TYPE VBAK,
tbl_ord TYPE ty_orders OCCURS 0 WITH HEADER LINE,
w_csrname(30) TYPE c,
w_csrno(30) TYPE c,
w_email LIKE adr6-smtp_addr,
f_shipto_found TYPE c,
w_custname(30) TYPE c,
w_month(2),
w_ldate(18),
w_total LIKE lips-lfimg,
w_lines TYPE i VALUE 0,
f_mail(1) TYPE c,
cnt_1 TYPE i VALUE 0,
cnt_2 TYPE i VALUE 0,
tbl_otf LIKE itcoo OCCURS 0 WITH HEADER LINE,
w_type(25) TYPE c,
st_doc_data LIKE sodocchgi1,
tbl_objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
tbl_line LIKE tline OCCURS 0 WITH HEADER LINE,
tbl_attach LIKE solisti1 OCCURS 10 WITH HEADER LINE,
tbl_objhead LIKE solisti1 OCCURS 10 WITH HEADER LINE,
tbl_proc_para LIKE soparai1 OCCURS 10 WITH HEADER LINE,
tbl_maillist LIKE somlreci1 OCCURS 10 WITH HEADER LINE,
tbl_pack_list LIKE sopcklsti1 OCCURS 10 WITH HEADER LINE,
tbl_cpo LIKE itcpo OCCURS 0 WITH HEADER LINE,"SAPscript output
" interface
tbl_cpp LIKE itcpp OCCURS 0 WITH HEADER LINE,"SAPscript output
" parameters
tbl_smtp TYPE szadr_adsmtp_line OCCURS 0 WITH HEADER LINE,
tbl_cdhdpos LIKE cdshw OCCURS 0 WITH HEADER LINE,
tbl_cdpos LIKE cdshw OCCURS 0 WITH HEADER LINE,
wrk_lines LIKE sy-tabix,
hltlines TYPE i,
off1 TYPE p,
fle1(2) TYPE p,
fle2(2) TYPE p,
htabix LIKE sy-tabix,
hfeld(500) TYPE c.
FORM ENTRY USING RETURN_CODE US_SCREEN.
if sy-tcode = 'VA01'.
IF nast-kschl = c_kschl_order.
SELECT SINGLE * FROM VBAK INTO WA_VBAK WHERE vbeln = nast-objky.
IF SY-SUBRC = 0.
CLEAR RETCODE.
XSCREEN = US_SCREEN.
PERFORM PROCESSING USING us_screen.
IF RETCODE NE 0.
RETURN_CODE = 1.
ELSE.
RETURN_CODE = 0.
ENDIF.
ELSE.
retcode = sy-subrc.
syst-msgid = 'ZVERROR'.
syst-msgno = '000'.
syst-msgty = 'E'.
syst-msgv1 = NAST-KSCHL.
syst-msgv1 = 'Sales Order cut letter
for this order already issued'.
syst-msgv2 = ' '.
PERFORM protocol_update.
ENDIF.
ELSE.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDIF.
endif.
ENDFORM.
FORM PROCESSING *
FORM PROCESSING USING proc_screen.
CASE nast-kschl.
WHEN c_kschl_order.
PERFORM get_orders.
CHECK retcode = 0.
PERFORM openform USING proc_screen vbak-landtx.
CHECK retcode = 0.
PERFORM layout.
CHECK retcode = 0.
CHECK proc_screen NE 'X'.
w_type = c_sale.
PERFORM send_email USING proc_screen.
WHEN c_kschl_order1.
PERFORM get_orders.
CHECK retcode = 0.
CHECK proc_screen NE 'X'.
w_type = c_sale.
PERFORM send_email USING proc_screen.
WHEN OTHERS.
retcode = 1.
syst-msgid = 'E0'.
syst-msgno = '430'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDCASE.
IF retcode EQ 0.
syst-msgid = '69'.
syst-msgno = '254'.
syst-msgty = 'S'.
syst-msgv1 = nast-kschl.
PERFORM protocol_update.
ELSE.
syst-msgid = 'CKCC'.
syst-msgno = '036'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
ENDFORM.
FORM PROTOCOL_UPDATE *
The messages are collected for the processing protocol. *
FORM PROTOCOL_UPDATE.
IF xscreen EQ space.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
MSG_ARBGB = SYST-MSGID
MSG_NR = SYST-MSGNO
MSG_TY = SYST-MSGTY
MSG_V1 = SYST-MSGV1
MSG_V2 = SYST-MSGV2
MSG_V3 = SYST-MSGV3
MSG_V4 = SYST-MSGV4
EXCEPTIONS
OTHERS = 1.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
*& Form get_orders
text
--> p1 text
<-- p2 text
FORM get_orders.
DATA : f_csr_found TYPE c.
SELECT SINGLE vbeln vkorg vdatu bstnk kunnr
FROM vbak
INTO (vbak-vbeln,vbak-vkorg,vbak-vdatu,vbak-bstnk,vbak-kunnr)
WHERE vbeln EQ nast-objky.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'VN'.
syst-msgno = '203'.
syst-msgty = 'E'.
syst-msgv1 = 'VBAK'.
syst-msgv2 = sy-subrc.
PERFORM protocol_update.
ENDIF.
SELECT vbeln posnr matnr pmatn arktx abgru kdmat werks
FROM vbap
INTO (vbap-vbeln,vbap-posnr,vbap-matnr,vbap-pmatn,
vbap-arktx,vbap-abgru,vbap-kdmat,vbap-werks)
WHERE vbeln = vbak-vbeln
AND abgru NE space "select items havng Rejection Reason
and PSTYV NE 'ZHDR'.
to check whether the reason for rejection was picked from the
managed codes tables
data: war_abgru type abgru,
w_exist type c.
clear : war_abgru, w_exist.
select single abgru from ZMAT_REJ002
into war_abgru
where vkorg = vbak-vkorg
and kunnr <> vbak-kunnr
and MATNR = vbap-matnr
and datef <= vbak-vdatu
and datet >= vbak-vdatu.
if sy-subrc <> 0.
select single abgru from ZMAT_REJ003
into war_abgru
where vkorg = vbak-vkorg
and kunnr <> vbak-kunnr
and MATNR = vbap-matnr
and datef <= vbak-vdatu
and datet >= vbak-vdatu.
if sy-subrc <> 0.
select single abgru from ZMAT_REJ001
into war_abgru
where vkorg = vbak-vkorg
and werks <> vbap-werks
and matnr = vbap-matnr
and datef <= vbak-vdatu
and datet >= vbak-vdatu.
if sy-subrc <> 0.
select single abgru from ZMAT_REJ004
into war_abgru
where vkorg = vbak-vkorg
and matnr = vbap-matnr
and datef >= vbak-vdatu
and datet <= vbak-vdatu.
if sy-subrc <> 0.
else.
w_exist = 'X'.
endif.
else.
w_exist = 'X'.
endif.
else.
w_exist = 'X'.
endif.
else.
w_exist = 'X'.
endif.
if w_exist = 'X'.
end for check from managed codes table
*to find the quantity fields
SELECT SINGLE wmeng bmeng
FROM vbep
INTO (vbep-wmeng,vbep-bmeng)
WHERE vbeln EQ vbap-vbeln
AND posnr EQ vbap-posnr.
*to get info about the customer
SELECT SINGLE kunnr
FROM vbpa
INTO vbpa-kunnr
WHERE vbeln EQ vbak-vbeln
AND parvw EQ c_parvw_shipto.
IF sy-subrc EQ 0.
f_shipto_found = 'X'.
SELECT SINGLE name1 spras
FROM kna1
INTO (kna1-name1,kna1-spras)
WHERE kunnr EQ vbpa-kunnr.
IF sy-subrc EQ 0.
w_custname = kna1-name1.
CLEAR kna1-name1.
ENDIF.
ENDIF.
SELECT SINGLE kunnr
FROM vbpa
INTO vbpa-kunnr
WHERE vbeln EQ vbak-vbeln
AND parvw EQ c_parvw_csr.
IF SY-SUBRC EQ 0.
f_csr_found = 'X'.
SELECT SINGLE kunnr name1 name2 adrnr
FROM kna1
INTO (kna1-kunnr,kna1-name1,kna1-name2,
kna1-adrnr)
WHERE kunnr EQ vbpa-kunnr.
IF sy-subrc EQ 0.
w_csrno = kna1-kunnr.
w_csrname = kna1-name1.
CLEAR kna1-name1.
SELECT SINGLE tel_number tel_extens fax_number
FROM adrc
INTO (adrc-tel_number,adrc-tel_extens,
adrc-fax_number)
WHERE addrnumber EQ kna1-adrnr.
CLEAR: adr6, w_email.
SELECT SINGLE * FROM adr6 WHERE addrnumber = kna1-adrnr.
IF sy-subrc = 0.
w_email = adr6-smtp_addr.
ENDIF.
ENDIF.
ENDIF.
*to get the date format in french
IF kna1-spras NE c_eng.
w_month = sy-datum+4(2).
SELECT SINGLE ltx
FROM t247
INTO t247-ltx
WHERE spras EQ kna1-spras
AND mnr EQ w_month.
CONCATENATE sy-datum+6(2)
t247-ltx
sy-datum+0(4)
INTO w_ldate
SEPARATED BY space.
ELSE.
CONCATENATE sy-datum+4(2)
sy-datum+6(2)
sy-datum+0(4)
INTO w_ldate
SEPARATED BY c_sep.
ENDIF.
w_total = vbep-wmeng - vbep-bmeng.
IF w_total GT 0.
PERFORM fill_orders.
ELSE.
IF vbap-abgru NE space.
w_total = vbep-wmeng.
PERFORM fill_orders.
ENDIF.
ENDIF.
CLEAR vbap.
endif. " check for w_exist for Managed Codes entry
ENDSELECT.
IF tbl_ord[] IS INITIAL.
retcode = 1.
syst-msgid = 'FZ'.
syst-msgno = '027'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
IF f_csr_found IS INITIAL.
syst-msgid = '8B'.
syst-msgno = '127'.
syst-msgty = 'W'.
syst-msgv1 = c_parvw_csr.
PERFORM protocol_update.
ENDIF.
IF f_shipto_found IS INITIAL.
syst-msgid = '8B'.
syst-msgno = '127'.
syst-msgty = 'W'.
syst-msgv1 = c_parvw_shipto.
PERFORM protocol_update.
ENDIF.
ENDFORM. " get_orders
*& Form layout
text
--> p1 text
<-- p2 text
FORM layout.
SORT tbl_ord BY bstnk kdmat.
LOOP AT tbl_ord.
AT FIRST.
PERFORM writeform_text.
ENDAT.
PERFORM writeform.
AT LAST.
PERFORM writeform_footer.
ENDAT.
ENDLOOP.
CLEAR : cnt_1,cnt_2.
PERFORM closeform.
ENDFORM. " layout
*& Form openform
text
FORM openform USING us_screen us_country.
DESCRIBE TABLE tbl_ord LINES w_lines.
IF w_lines EQ 0.
retcode = '1'.
syst-msgid = 'FE'.
syst-msgno = '078'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
CHECK retcode EQ 0.
INCLUDE zrvadopfo.
ENDFORM. " openform
*& Form send_email
text
-->P_PROC_SCREEN text
FORM send_email USING PROC_SCREEN.
f_mail = 'X'.
PERFORM openform USING proc_screen vbak-landtx.
LOOP AT tbl_ord.
AT FIRST.
PERFORM writeform_text.
ENDAT.
PERFORM writeform.
AT LAST.
PERFORM writeform_footer.
ENDAT.
ENDLOOP.
CLEAR cnt_2.
PERFORM closeform.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF' "'ASCII'
IMPORTING
bin_filesize = st_doc_data-doc_size
TABLES
otf = tbl_otf
lines = tbl_line
EXCEPTIONS "DEVK912166
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'OA'. "DEVK912166
syst-msgno = '186'. "DEVK912166
syst-msgty = 'E'. "DEVK912166
PERFORM protocol_update.
ENDIF.
REFRESH tbl_objtxt.
CLEAR tbl_objtxt.
CLEAR tbl_proc_para.
REFRESH tbl_proc_para.
CLEAR tbl_maillist.
REFRESH tbl_maillist.
CLEAR tbl_pack_list.
REFRESH tbl_pack_list.
st_doc_data-obj_name = 'Sales Order Cut Letter'.
st_doc_data-obj_langu = 'E'. "DEVK905849
st_doc_data-sensitivty = 'F'. "DEVK905849
st_doc_data-obj_prio = 1. "DEVK905849
CONCATENATE w_type 'Cut Letter' INTO "#EC NOTEXT
st_doc_data-obj_descr SEPARATED BY space.
DATA w_line(3) TYPE c.
PERFORM format_pdf. "DEVK905849
concatenate VBAK-VBELN '.PDF' into tbl_objhead.
tbl_objhead = 'Sales Order Cut Letter.PDF'.
APPEND tbl_objhead.
"DEVK905849
CLEAR wrk_lines.
DESCRIBE TABLE tbl_attach LINES wrk_lines.
fields needed for email
tbl_maillist-com_type = 'INT'.
tbl_maillist-receiver = w_email.
tbl_maillist-rec_type = 'U'.
APPEND tbl_maillist.
send email
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
STARTING NEW TASK 'MAIL'
EXPORTING
document_data = st_doc_data
document_type = 'PDF'
COMMIT_WORK = 'X' " added after ECC6.0 upgrade
TABLES
object_header = tbl_objhead
object_content = tbl_objtxt
receivers = tbl_maillist
EXCEPTIONS "DEVK912166
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'ZA_G'. "DEVK912166
syst-msgno = '922'. "DEVK912166
syst-msgty = 'E'. "DEVK912166
syst-msgv1 = sy-subrc. "DEVK912166
syst-msgv2 = tbl_smtp-adsmtp-smtp_addr. "DEVK912166
PERFORM protocol_update.
syst-msgid = 'VW'.
syst-msgno = '001'.
syst-msgty = 'E'.
syst-msgv1 = 'Print successful:email Recepient Invalid'."#EC NOTEXT
PERFORM protocol_update.
ENDIF.
ENDFORM. " send_email
*& Form fill_orders
text
--> p1 text
<-- p2 text
FORM fill_orders.
tbl_ord-bstnk = vbak-bstnk.
tbl_ord-kdmat = vbap-kdmat.
tbl_ord-xblnr = vbak-vbeln.
tbl_ord-ean11 = vbap-pmatn.
tbl_ord-arktx = vbap-arktx.
tbl_ord-csrno = w_csrno .
tbl_ord-csremail = w_email.
tbl_ord-spras = kna1-spras .
tbl_ord-csrphone = adrc-tel_number.
tbl_ord-csrfax = adrc-fax_number.
tbl_ord-csrext = adrc-tel_extens.
tbl_ord-total = w_total.
tbl_ord-custname = w_custname.
tbl_ord-csrname = w_csrname .
tbl_ord-ldate = w_ldate.
APPEND tbl_ord.
CLEAR tbl_ord.
CLEAR w_total.
CLEAR w_ldate.
ENDFORM. " fill_orders
*& Form writeform_text
text
--> p1 text
<-- p2 text
FORM writeform_text.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'WTEXT'
window = 'WINDOW2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'EBR'.
syst-msgno = '056'.
syst-msgty = 'E'.
syst-msgv1 = 'WTEXT'.
syst-msgv2 = 'WINDOW2'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform_text
*& Form writeform
text
--> p1 text
<-- p2 text
FORM writeform.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMAIN'
window = 'MAIN'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'EBR'.
syst-msgno = '056'.
syst-msgty = 'E'.
syst-msgv1 = 'WTEXT'.
syst-msgv2 = 'WINDOW2'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform
*& Form writeform_footer
text
--> p1 text
<-- p2 text
FORM writeform_footer.
IF nast-spras = 'N'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'FOOTER'
window = 'MAIN'
EXCEPTIONS
element = 1
window = 2.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'WFOOTER'
window = 'WINDOW12'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'EBR'.
syst-msgno = '056'.
syst-msgty = 'E'.
syst-msgv1 = 'WFOOTER'.
syst-msgv2 = 'WINDOW12'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform_footer
*& Form closeform
text
--> p1 text
<-- p2 text
FORM closeform.
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = tbl_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
OTHERS = 3.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'PS'.
syst-msgno = '005'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " closeform
*& Form format_pdf
text
--> p1 text
<-- p2 text
FORM format_pdf.
FIELD-SYMBOLS <fs>.
DESCRIBE TABLE tbl_line LINES hltlines.
DESCRIBE FIELD tbl_line LENGTH fle1 IN BYTE MODE . Defect#1579-
DESCRIBE FIELD tbl_objtxt LENGTH fle2 IN BYTE MODE . Defect#1579-
Start of Defect#1579+
DESCRIBE FIELD tbl_line LENGTH fle1 IN CHARACTER MODE.
DESCRIBE FIELD tbl_objtxt LENGTH fle2 IN CHARACTER MODE.
End of Defect#1579+
CLEAR tbl_objtxt.
REFRESH tbl_objtxt.
LOOP AT tbl_line.
htabix = sy-tabix.
MOVE tbl_line TO hfeld+off1.
IF htabix = hltlines.
fle1 = strlen( tbl_line ).
ENDIF.
off1 = off1 + fle1.
IF off1 GE fle2.
CLEAR tbl_objtxt.
tbl_objtxt = hfeld(fle2).
APPEND tbl_objtxt.
SHIFT hfeld BY fle2 PLACES.
off1 = off1 - fle2.
ENDIF.
IF htabix = hltlines.
IF off1 GT 0.
CLEAR tbl_objtxt.
tbl_objtxt = hfeld(off1).
APPEND tbl_objtxt.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " format_pdf
ANy Suggestion or help will be appreciated!
Regards,
Kittu
Edited by: Kittu on Jun 30, 2008 12:32 PMHello Julie Waller,
Very Good evening!
Thank you very much for your response!
Sometimes...I miss the basic things and start concentarcting on typical ways to fix the issue. ....which will only make my issue critical.
Hello Sathya,
Thank you for your response!
POints are rewarded..
Have a great day ahead!
Regards,
Kittu -
Output type for Proforma Invoice for return delivery from delivery type RLN
Client require Output type Proforma Invoice for return delivery to vendor. As such return item category is not relevant for pricing so from delivery to proforma invoice can not have with p-ricing. I got quantity correct but pricing is coming Zero.
Client have ZPAC as packing list output type from delivery which shows quantity and pricing. So decided to use the same logic to pull pricing for proforma invoice from delivery.
Here delivery has standard output ZPAC as packing list with access sequence Z002 as Delivery Type.
I want to pop up output type for all return delivery so using access sequence with delivery type/vendor.
Vendor filed does not exist in delivery output type so brought that firld LIFNR.
It is assigned to procedure and maintained ZPRO output type for Proforma invoice. Asigned VV21 on front end.
Problem Still automatic output type ZPRO is not poping up. What type of access sequence will help me to pop up or what in configuration am I miising?
Appreciate help for solution at earliest.Hi Padamsree,
I know Pricing & output very well. I need profomra invoice to be printed with quantity & value for return goods to the vendor. Pricing is associated with Item category RLLN for delivery type RLL which is return type delivery.
I need to have pricing in my Proforma invoice which is copied from delivery to billing document VTFL. Just check well how it is working in the system & if you know please answer so that it should be workable on the system. As theoretical answer may not be helpful. Appreciate for your time.
Thanks -
Regarding Creation of Output types for SAP SCRIPTS
Hi All,
I want to create new output types for my SAP Script.
What is the procedure for creating new <b>Z - Output Type</b>.
Like <b>ZA01 for Sales Order</b>.
What is the procedure can any body help me in this regard.
It is not to use <b>ZA01</b> in <b>NACE</b> & connect Print Program & Layout set against Form Entry.
It is for creation of <b>ZA01 Output</b> Type itself.
If anybody knows the procedure please post the steps.
Also please mention will there be any diffrence in creation from <b>Module to Module</b> (or) <b>Transaction (Vs) Transaction</b>. Just like <b>Sales Order (Vs) Purchase Order (Vs) Production Order</b>.
Thanks in advance.
Thanks & Regards,
Rayeez.hi Shaik,
Steps for output type:
Go to NACE Transaction
Select V1 - Sales.
Click Output type
In edit mode , click on new entries.
Give output type as ZA01 with some descp.
Then enter , then u need to give the Access seq. as 0010
Rest proprties are more and less similar to the BA00 standard output type in V1 only.
After that u need to give the processing routines.
In that u need to give the Program name
followed by Form routine name
In this way u can create the output from NACE tran.
Let me know if u want anything else.
Cheers
Rewrd points, if found helpful
Maybe you are looking for
-
Need to Disable field in Table maintenance generator
Hi Frds, I have created a custom table .But i stuck at one point. In the TMG one field is User ID and next field is filled with Full name of this User ID(made it noneditable). To get user name i implement '01' event in TMG. and its working fine. But
-
How do I configure the mixed signal graph property node to set the plot names
I have a mixed signal graph displaying digital and analog data in two groups. I would like to programmatically set the names of individual plots i.e. rather that the digital graph displaying 'Digital 0->Line 0' I would like to set it to 'Signal 1'
-
Quicktime 7 OS status error -50 when opening a movie.
Have reinstalled quicktime 7, think there's some conflict. Have tried rereinstalling, updating, copying application from another computer. But quicktime 7 just won't play anything! Think there's a file corrupted somewhere.... not sure where to check.
-
Hi, I have a question. If I import a model I must use a JCo user. After the import I can look the project-properties -> Web Dynpro References -> JCO References. But there I can only see the Name of the Connection, but I want to see the used User. Do
-
My camera icon showing some problem
My camera icon showing some problem, i still can access and see it, but the problem is, my camera's icon on the home menu is not showing properly, it is just a empty grey icon, how i can solve this?