Output determation from delivery doc

Ok I feel retarded for asking but here goes.
On a delivery I can go up to extra\delivery output\header and then manual add an output type to print it.
I just need to add that output type so it can just be selected from the displayed list, with out having to add it.
The output type selection will be based on delivery type.
Thanks

OK let try to reword this.
From a delivery that has already been created, then go to the menu extra\delivery output\header
Ok on this screen there can be several output types that have been assigned to this delivery type.   There may be an EDI that has been processed and shows a green light.
Then there maybe a couple of yellow light output types that are ready to print, like a bill of lading, or a packing list.   These items will be manually printed when needed.
Then you can select other output types by clicking on the green + button at the bottom.   Say a different type of bill of lading.
Ok what I want to do as add one of the output types, that can be selected by pressing the green + button, to the opening screen.
Or how do I assign a output type to a delivery type?
Thanks
Now you can also add

Similar Messages

Output Determination for Delivery doc

Hi Friends,
I am not able to see any output types maintained for delivery documents.......LD00 is the output type for delivery..so whr the setup exists in IMG?.....thanks in advance.....

Hi
You can go to NACE t-code to check for your output type. On the main screen, select "Shipping" and click on "Output Types" icon on top.
Search for your output type say LD00. You will be able to see what is the driver program against it and what form (standard SAP or customized) is attached to it for printing purpose.
Go to VV23 T-code and input your condition type LD00 and click on "condition info" and execute it. You will be able to see what condition records are maintained against that output type. If you dont get any entries then condition records have to be maintained. For this you can go to VV21 T-code and maintain the condition type LD00 for printing against any access sequence available in your system.
Hope this helps
Regards,
Syed Nasir

Create IDOC by output type from delivery

Hello,
I have an output type that comes out by a delivery, what I create this delivery from any plant
beside a new one, the output is created and sent as it should be to the XI as an IDOC,
But when I'm trying to do so from a new plant that was created here, this output is not created.
Do anyone know if there is any link between an output type and a plant (werks) ?
Thank you,
Kind Regards,
Amit Berku

hi,
>>>Do anyone know if there is any link between an output type and a plant (werks) ?
I don't think so - as plant it always on line level in the delivery
and access sequence usually works only on header fields
but there might be a custom made requirement attached to your output type
which checks the plant - this is for sure possible
but it's pretty easy to check in TCODE NACE and access sequence can be checked
from the delivery - header output tab
Regards,
Michal Krawczyk

How to get Picking List Output EK00 from delivery?

Hi All...
I have created a delivery..and picked completely.
The shipping point is attached to the output type correctly..
Still I am not getting Output Type EK00 in the Delivery-> Extras-> Picking Output
And also how to get the print preview of picking list from the delivery?
Thanks

Hello my friend
If the condtion record is not maintained in VV21 then the output type will not appear in the delivery output.
If the record is maintained then check the delivery in VL02N and then goto the delivery output and then Goto--> Determination analysis to find out the issue

STO: item sequence in PO is different from delivery doc

Dear All,
Issue is regarding STO.
Once we create the purchase order then do the delivery.
What we observe is the item entered in PO is not in the same sequence while creating the delivery, due to which client is facing the problem at invoice level.
For ex: Material in item no. 1 in PO is item no. 10 in delivery document.
For further clarification, please revert back.
I/p's will be of great help and rewarded too.
With regards,
Vijayshree

closed

Output type for Proforma Invoice for return delivery from delivery type RLN

Client require Output type Proforma Invoice for return delivery to vendor. As such return item category is not relevant for pricing so from delivery to proforma invoice can not have with p-ricing. I got quantity correct but pricing is coming Zero.
Client have ZPAC as packing list output type from delivery which shows quantity and pricing. So decided to use the same logic to pull pricing for proforma invoice from delivery.
Here delivery has standard output ZPAC as packing list with access sequence Z002 as Delivery Type.
I want to pop up output type for all return delivery so using access sequence with delivery type/vendor.
Vendor filed does not exist in delivery output type so brought that firld LIFNR.
It is assigned to procedure and maintained ZPRO output type for Proforma invoice. Asigned VV21 on front end.
Problem Still automatic output type ZPRO is not poping up. What type of access sequence will help me to pop up or what in configuration am I miising?
Appreciate help for solution at earliest.

Hi Padamsree,
I know Pricing & output very well. I need profomra invoice to be printed with quantity & value for return goods to the vendor. Pricing is associated with Item category RLLN for delivery type RLL which is return type delivery.
I need to have pricing in my Proforma invoice which is copied from delivery to billing document VTFL. Just check well how it is working in the system & if you know please answer so that it should be workable on the system. As theoretical answer may not be helpful. Appreciate for your time.
Thanks

Delivered Qty in SO differ from the actual delivered qty in Delivery Doc

Hello,
I have a situation where in the delivered qty in Schedule line of the sales order is complete and when we check the delivery document i have still to complete the delivery.
Eg. I have a qty for 20 in sales order.
now the schedule line shows 2 line item
1st for 17 qty and the other for 3 qty,
first delivery is created for 15 qty the second is created for 1 and the third one is created for 3 qty.
now when i look in the sales order schedule line i see two schedule line item for 17 and 3 and completes the line item.
and when i check the delivery doc i see 15, 1 and 3 qty's
but when i see the document flow i see it shows 16 qty instead of 15.
I am not sure how to rectify this 16 qty to 15 qty.
Is there any program which can rectify this discripency in the qty in the flow.
regards
Abhilash Mangatt

Hi Shiva Ram,
This is not helping me out. I had tried this but with not correction.
I have also used the correction program SDRQCR21 and RVV05IVB, but with no success.
Kindly suggest some other way out for this issue.
I appreciate your effort
regards
Abhilash Mangatt

How get Material Doc. From Delivery

Hi experts,
How can i get Material Document No. from Delivery No. when PGI Complete.
What is the Proper way to find the material document no. from delivery no.
with best performance.

Use table VBFA.
select <fields> from VBFA
where vbelv = <delno>
and posnv = <del line item>
and vbtyp_n = 'R'.
Regards
Vinod

Why Delivery doc. printed when we release credit check at VKM5.

Hi
when user1 create delivery doc. delivery note gets printed with output type WMTA after that user2 releases delivery through credit check (VKM5) this time again delivery doc. printed.
why delivery doc gets printed when user2 releases the delvery doc from credit check.
need your input
thank you

check in output procedure against your output - WMTA any routine is assigned, take help of abap and ask him t check the routine. Next check output program where system is not checking the processing status from NASt table before printing.
May you need to write logic as above.

Which table I can get sales order no from delivery numbar.

Hi,
I want sales order no from delivery no. right now I am using table VBFA where I am passing VBELN and POSNN and geting sales order no. but performance of select query is very poor bcouse I am not passing first two key fields in the select query.
Is there any other tablefrom where we can get sales order no. from delivery no. so that performance of report can be improved.
Thanks,

hi,
sales doc header ( table VBAK ) copy to Delivery header table( LIKP)
sales doc item table ( VBAP) copy to Delivery item table( LIPS)
you can see this in copy control VTLA ,
now u want slaes doc no. from dilv doc. no.
so go to t-code se11.....
fill table LIKP u will get VBELN field for deliv doc no, & TERNR field for sales doc. no.
so if u want to call sales doc no from dilv doc no.. u can use table LIKP in ur report.
i hope it will help u.

Remove Header and footer from Word Docs

Is it possible to remove the header/footer from Word docs?
The html output from ctx_doc.markup gets the header/footer and (specialy)page numbers all messed up.
[]'s
thanks

Please define 'messed up'. I'll reproduce here and then try to find a cause/solution. I checked a couple of other forums and Metalink with no good discussion on the topic.
-Ron

SAP Output as MS word doc.

My requirement is to get the output as a MS word format ..
without using any third party toool? Can we really achieve it or not ?
What we propsed is a solution is to get the output to a PDF file then to use
the PDF to word converter which cost them some amount but they were not satisfied to that .
they need the output directly from SAP .
Can we do this in SAP or not ?

>> NO experts are replying for this Question ....
Hm... I don't think you will get very far with comments like this
But anyway...
I don't think there is a way to convert any output to MS Word format natively using only ABAP. It is possible using OLE but that requires MS Word to be installed on the workstation, plus due to OLE, this doesn't work in programs running in the background.
The situation is similar to generating an Excel spreadsheet (and now I'm not talking about DAT and tab delimited format but real native Excel output). It is also not possible without involving OLE or some other third party tool as far as I'm aware.
I'm sure there is a reason for this - probably related to licensing or something like that.
It'd be certainly nice to have a way to create .DOC or .XLS files natively from ABAP... just nobody developed it yet

Copying Exchange rate from sales Doc to billing doc

Hello,
I have an issue with the update of the exchange rate in the billing document.
In fact when i create a sales order then the delivery associated. then i change the exchange rate in the sales order.
When i go to create the billing doc, the exchange rate is not updated in the billing document.
I guess because it is not defined in the copy rule requirement from Sales doc to delivery, and from delivery to billing doc? can you please confirm if it is the case?
Thanks
Regards

Hi
First of all check weather exchange rate has been maintained between the currencies from which you are changing (Ex : INR to EUR). If the currency conversion has been maintained then check in VTFL copy control weather PricingExchange rate type field has been maintained or not. If not maintained then maintain the PricingExchange rate type feild as per your requirement and then do the complete cycle again.
Regards
Srinath

Trigger output on Inbound Delivery Type

Hello,
I'd like to know if it's possible to trigger output on Inbound Delivery Item in SAP ERP. Reason I ask is that we want to trigger a label printout for every delivery item during goods receipt of the inbound delivery.
I know I can trigger output on Inbound Delivery Header, but not sure how to get a printout per delivery item.
Can anyone let me know if it's possible, and if so, how to set this up?
Regards,
Oliver

Hi,
I am not experienced in printing, and at first glance this does look difficult...
Because in customizing you have two separate paths...
The path given above from Warren, and then it splits:
- Maintain Output Determination for Outbound Deliveries
- Assign Output Determination Procedure
- Maintain Output Determination for Inbound Deliveries
- Assign Output Determination Procedure
Now the difference in these two paths is that:
- if you select the first one, you get a pop-up giving you a choice to "Assign Deliveries (header)" and "Assign delivery items",
- if you select the second one, there is no further selection, you only see delivery types, and this is also filtered, only inbound deliviery types are shown.
So it seems not possible.
BUT: if you select the "Assign delivery item" option in the first path, you see ALL item types; also for inbound. So test it there, hope it works. (I suppose now that you know how to print, have all the determination, etc - yes, you wrote that you know it for outbound).
Brgds
Juergen

Changes in Delivery doc effect in which table

Hi all,
iam chaneing the deliveryquantity in delivery order, that changes iun which table that will be stored.
i know likp,lips this tables are stored the delivery details.
but i want in which table that delivery doc effect will be stored.
pls help me
regards,
dhanush

Hi dhanush
Apart from LIPS, LIKP tables check in VEPO table where the delivery item (POSNR) is stored
Regards
Srinath

Output determation from delivery doc

Similar Messages

Maybe you are looking for