Output determination configuration
Hi Expert,
Please give me the all steps for Output determination configuration for SHIPMENT (txn VTO2N).
Since I am technical guy I am not aware with this configuration, so please consider it and please provide me from scratch.
As I create one output type ZAV7 it is similar to ZA02 existing one.
i copied existing program that is running for ZA02.
AND ASSIGNED THIS COPIED PROGRAM TO NEW FORM i.e. ZAV7(output type).
After that I transfer it to 220 client.
when I run Txn VT02N. for ZA02 the form is coming properly.....but for ZAV7.....
it gives the message
You have specified an output category which has not been defined according to the output determination procedure.
After this message i am not able to do the configuration.
thanks
Babbal
Hi Babbal,
You have to assign ouput type to the ZAV7.
Please follow the following configuration:
Go to SPRO> Logistics execution> Transportation> Basic transportation functions> Output control> Maintain output determination for shipments
Steps-
1. Maintain condition table or u can use the existing table 017 "Shipment type" or 022 "transport planning point and shipment type".
2. Maintain access sequence: Here you can use standard access sequence 0001 or 0002 based on the condition table you have maintained.
3. Maintain output type- Add new entry ZAV7, give description. In general data tab page assign the access sequence you used. Check the access to conditions. For default values tab page- maintain the dispatch time as 4 Send immediately, transmission medium as 1print output, partner function as CR. in storage system tab page maintain the storage mode as 1Print only. In Print tab page maintain the parameter as 8Transportation planning point.
Double click on Processing routines and maintain the program, form entry and form name program.
Double click on Partner function and maintain medium as 1Print output and functional partner as CR. Save it.
4. Maintain output determination procedure: Standard procedure will be already maintained V70001 "Transportation Output". Select the procedure and double click on control data. Click on new entries and maintain the step as 30, counter 1 and enter the output type ZAV7. Save this.
5. Assign output determination procedures: maintain the shipment type, the output determination procedure and output type. Save this.
Please reply for any further clarification.
Regards
Suvankar
Similar Messages
-
GR,GI and Transfer Posting Output Determination configuration settings
Hi All,
Please explain the output determination configuration settings for GR,GI and TR.
Thanks in advance.
regards
sapmmPlease check this link out for details:
Output dertermination for GR/GI
Output type configuration for GR : MB90
Edited by: Afshad Irani on Apr 19, 2010 3:24 PM -
Output Determination Configuration Setting for GoodsIssue(Transfer Posting)
Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MGhi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P -
Output determination configuration for SHIPMENT (txn VTO2N)
Hi Expert,
Please give me the all steps for Output determination configuration for SHIPMENT (txn VTO2N).
Since I am technical guy I am not aware with this configuration, so please consider it and please provide me from scratch.
As I create one output type ZAV7 it is similar to ZA02 existing one.
i copied existing program that is running for ZA02.
AND ASSIGNED THIS COPIED PROGRAM TO NEW FORM i.e. ZAV7(output type).
After that I transfer it to 220 client.
when I run Txn VT02N. for ZA02 the form is coming properly.....but for ZAV7.....
it gives the message
You have specified an output category which has not been defined according to the output determination procedure.
After this message i am not able to do the configuration.
thanks
BabbalHi Babbal,
You have to assign ouput type to the ZAV7.
Please follow the following configuration:
Go to SPRO> Logistics execution> Transportation> Basic transportation functions> Output control> Maintain output determination for shipments
Steps-
1. Maintain condition table or u can use the existing table 017 "Shipment type" or 022 "transport planning point and shipment type".
2. Maintain access sequence: Here you can use standard access sequence 0001 or 0002 based on the condition table you have maintained.
3. Maintain output type- Add new entry ZAV7, give description. In general data tab page assign the access sequence you used. Check the access to conditions. For default values tab page- maintain the dispatch time as 4 Send immediately, transmission medium as 1print output, partner function as CR. in storage system tab page maintain the storage mode as 1Print only. In Print tab page maintain the parameter as 8Transportation planning point.
Double click on Processing routines and maintain the program, form entry and form name program.
Double click on Partner function and maintain medium as 1Print output and functional partner as CR. Save it.
4. Maintain output determination procedure: Standard procedure will be already maintained V70001 "Transportation Output". Select the procedure and double click on control data. Click on new entries and maintain the step as 30, counter 1 and enter the output type ZAV7. Save this.
5. Assign output determination procedures: maintain the shipment type, the output determination procedure and output type. Save this.
Please reply for any further clarification.
Regards
Suvankar -
Steps for output determination
Hi
Can any one give me steps for output determination
Thanks
Rajeshhi
Output Determination Configuration
Sales order confirmation
1. Maintain output types (Transaction: V/30 or Sales & Distribution -> Basic Functions -> Output -> Output determination -> Output proposal using the condition technique -> Maintain output determination for sales document -> Maintain output types)
1.1. Select and copy BA00 to ZA00
1.2. Access sequence 0003 (Sales org / customer). If one of these is not suitable then you need to maintain condition tables
1.3. Change Transm. Medium to 6 (EDI), partner function SP (Sold to), Time (4 = immediate)
1.4. Check access to conditions and check off multiple issuing
1.5. Save
2. Assign output determination procedure (Transaction V/47 or Sales & Distribution -> Basic Functions -> Output -> Output determination -> Output proposal using the condition technique -> Maintain output determination for sales document -> Assign output determination procedure)
2.1. Create a new entry for ZA00, medium 6, function SP and order confirmation.
3. Maintain output determination procedure (Transaction V/32 or Sales & Distribution -> Basic Functions -> Output -> Output determination -> Output proposal using the condition technique -> Maintain output determination for sales document -> Maintain output determination procedure)
3.1. Check Assign output determination procedures -> Allocate sales document header (Transaction V/43) for the Output procedure being used for order OR and BA00 and youll find that it is linked to V10000
3.2. Select V10000 (Transaction v/32) and choose control
3.3. Add a new step for your new output type. Eg. Step 40 (Next Step in sequence), Counter, Type = ZA00 and requirement 22 (Requirement tells when the output is required to be fulfilled. Ie. After order confirmation, after goods issue, )
4. Create condition records (Menu path: Logistics -
> Sales & Distribution -> Master data. Output -> Sales document Create)
4.1. If required select the appropriate key combination (in this case the Sales org / customer relationship)
4.2. Enter the customer number (QWM000 in this case) and enter. The rest of the values should be read in except the partner number.
4.3. Enter the required partner number (QWM000 in this case). This is the partner that will be EDId the data. It is usefull when you have multiple SAP customers that need to send messages to 1 partner. Eg. All the Wal-Marts send their invoices to 1 office. You would then have a list of customers, relating to each Wal-Mart, pointing to 1 Wal-Mart partner that will receive all the EDI docs.
Advance shipping notification
Similarly the output type was copied from LALE to ZALE and linked to partner QWM000
Based on when a delivery note is created (Transaction V/36)
Invoice
Similarly the output type was copied from RD00 to ZD00 and linked to partner QWM000
Based on when a delivery goods issue is posted. (Transaction V/42)
=====
also Refer to the links below. can get useful info..
Output Determination
http://help.sap.com/saphelp_46c/helpdata/en/30/c6853488601e33e10000009b38f83b/frameset.htm
http://help.sap.com/saphelp_crm40/helpdata/en/b3/58bf39f7568648e10000000a11402f/content.htm
http://www.sap-img.com/materials/purchasing-tips.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/output-determination-572556
=======
Screen Shots OUtput Determination Enhancing
http://www.saptechsolutions.com/pdf/EnhancingOutputDetermination.pdf -
Configuring Output Determination to use a SMARTFORM
I am in the process of trying to configure the output determination for a billing document to use a SMARTFORM. Has anyone ever done this, and what fields in the proceesing routines of the output types do I need to populate.
Hi Mazurek,
Welcome to SDN.
You can use the following in processing routine for application V3 (Billing) in transaction code V/40.
- Medium = 1 (Print Output) or 2 (Fax)
- Program = RLB_INVOICE
- Form Routine = ENTRY
- SmartForm = LB_BIL_INVOICE
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
How could I configure Email in output determination
hi
The client wants to send the Output to cusotmers Email , can u pls tell me how could i configure the E mail in output determination
Thanks in advance
Regards
DineshHi
SAPconnect provides a standard interface for external communication, which supports sending using telecommunication services, such as FAX, pager (SMS), Internet and X.400, as well as sending to printers and between several SAP Systems. It enables external communication components to be connected to the SAP System.
As of Release 6.10, SAPconnect also provides a direct connection to the Internet using the SMTP plug-in of the Web application server. This enables you to send messages directly to Internet addresses, without using an additional external communication system. As a result, it is also possible to communicate with SMTP-compatible fax gateways or paging gateways, which do not have to be set up specifically for the SAP System, as well as external fax and paging service providers.
See the Useful Note for configuration and setup
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Note 455127 - E-mail (SMTP) in different SAP releases
Note 634006 - ICM messages explanatory note
Note 517484 - Inactive services in the Internet Communication Framework
Note 63480 - R/3 and MS Exchange linking
Note 633265 - SMTP PlugIn: Multi-codepage ability
Regards
Anilsai -
Configuration of output determination
dear sap gurus
i want to know the output determination step by step configuration , thanks in advanceHi,
<b>OUTPUT DETERMINATION:</b>
Output is a form of media from business to one of its business partners. The output can be sent to any of the partners defined in the document. Outputs are usually in the form of Order Confirmations, Freight List, Delivery Notes, Invoices & Shipping Notifications. Determining form of output is output determination
Types of Output: Print Output, Fax, Telex, E-Mail & EDI (Electronic Data Interchange)
PRINT OUTPUT:
SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents & output det for billing documents.
Create Condition Table: select the field Sales Doc Type from field catalog & Save
Maintain Access Sequence: 4-digits code & description. Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type.
Maintain Output Types:
AF00: Inquiry
AN00: Quotation
BA00: Order Confirmation
LD00: Delivery
Select BA00 & Copy & Rename. Give the same 4-digit code as given to acc seq.
You Can Maintain:
Languages of Output
Partners (to whom we want to send output)
Print Program- print specification
Sap Script- layout
Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions.
Maintain Output Determination Procedure: V10000 (Standard Procedure). Go to new entries & create your own 6-digit code with descp. Select the procedure & go to Control Data. Here mention the output type i.e. cond type & leave requirement and manual only columns as blank.
Determination Rule: link the 6-digit procedure code to doc types.
Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately.
Once you press enter you will come across 2 key combinations:
Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. {It contains: Sales Orgn, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.}
Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language.
Reward points if it helps -
Purchase Order and GR document Output Determination and creating own logo o
Can anyone let me know the process of output determination of PO and GR documents.
Also let me know the way to incorporate my own logo on the documentsHi sudip
For the logo on documents, you have to take help of ABAP ppl.
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document.
Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02 -
Output type configuration for the Goods Receipt without the PO.
Hi,
I have a scenario whereby I want two Smartform(s) to fire from the MIGO Transaction. It is for Goods Recepit / others . Movement type '501'. Now we have created a new output type ZWE1 and configured in the system in the Transaction SPRO as follows:
Materials Management Inventory Management and Physical Inventory Output Detaremination Output types
ZWE1 is configured along with the Program and the Routine name but no Smartforms has been specified since there are two smartforms to be triggered via this Z program and via MIGO based on the material type which would be decided by the Program internally.
We have also configured the Material Output Determination and the Procedures fin the Ciondition Procedures for the Control data ME0001 mentioning this output type without the requirement code 173.
We have also configured the Output type ZWE1 with the Program name and the Routine in the link Assign Forms and Program
but somehow the Program still does not get trigerred.
Can anyone please tell me what is the reason for this and how this Prpblem should be addressed.
Any help on this front would be appreciated.
Suitable eward points would be awarded if Your solution works.
Thanks,
Regards,
Deepak.Answered.
-
Hi, I don't have much knowledge,waht are the steps and settings required to maintain output determination for purchase order and material document.
Thank you.Hi,
PO Output
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
GR Output
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Regards,
Biju K -
Line Item fields for output determination?
Hi Gurus,
we are having this dilemma. we want to create an output type for Purchas Orders which will be automatically triggered thru condition records. however, the criteria should include PLANT and MATERIAL GROUP which we all know as part of Line Item Details.
our problem now is that when the output types are created, our output is not created because the PLANT and MATERIAL GROUP criteria is not satisfied. it is empty.
is there a way to fix this? i'm thinking maybe some abap code or badi to force the value to the kompbea structure can do the trick (as the criteria came from this) but we have tried this and the kompbea field does not get populated.
any ideas? abap fix and configuration is most welcome. <removed by moderator>
thanks.
Edited by: Thomas Zloch on Nov 22, 2010 5:12 PM - please do not offer ..., read rules of engagementDear Guru's,
we just facing the already discussed issue that a PO within PLANT from PO-item-level should be part of the PO-output determination. Which userexits have to manipulated to get field PLANT into structure KOMKBEA_FILL especially when PO is still not saved (NO EKKO/EKPO information available) but message is already determined with status "NOT PROCESSED"???
Thanks for an answer.
Regards,
Bernd -
Output determination for Customer Account group - A brain teaser
At the place of configuration for Account groups, there is a field called Output Determination which has values like DB001, DB002 etc which says output for sold to, ship to and so on...
What is the purpose of maintaining output determination procedure at the account group level?
And also, where can i do the complete output determination for it? Like i could see Output determination for sales activities, sales documents, billing documents and shipping...But no where in the img screen, i found a place where i can configure these? Any ideas?In SAP, we send different output types(read documents) for Inquiries, quotations, orders etc. to relevant partners (read contact persons) sold-to party, ship-to party etc. thru various transmission mediums like ex. Print, Fax, e-mail etc.
Output can be determined by using component output determination procedure. System should know from where the output is to be determined whether from IMG or from customer A/C group. This is depended upon the control that we can activate or deactivate in "Check access for condition type" in definition of the output type (T.Code: NV03)
Output Determination:
IMG > Sales and Distribution > Basic Functions > Output Control > Output Determination Output Determination Using the Condition Technique > Maintain Output Determination for Sales activities/ Sales Documents etc.
Regards
AK
Reward points if helpful -
Handling unit output determination questions
I have configured a new output type for a custom label we need to implement for handling units. It is assigned as V6, for Ship-to Party/Shipping Material.
In VL01N or VL02N, I am able to create the handling units and pack the delivery line item materials into them.
I am able to manually assign the output type to the handling unit in VL01N/VL02N, but have not been successful in getting the output type to auto populate. I have verified that it is not populated after packing the HU and saving from VL01N, or when doing from VL02N, or after PGI.
I have been searching the forums and have not found the answers I need.
1. Is it possible for the output type to automatically populate for a handling unit? If so, at what point should this happen? I would think based on how our custom label output types for delivery documents behave, it would assign after save from either VL01N or VL02N.
2. When I create the HU, I specify a VERP packaging material number that represents the carton in order to create the HU. I do not have the material on the sales order or delivery as a line-item, and I am not getting any error messages indicating that it should be.
If this should work the way we expect it to, any suggestions on what I have overlooked that would prevent my output type from automatically assigning?
Thanks in advance for your help.
DaveHi Joan,
Thank you for your answers. They were most helpful. I was finally able to get the new Output Type to assign after I created the HU's and saved the delivery.
Hopefully you won't mind if I ask some related questions.
1. If I went to VL02N for a delivery where I had already created the handling unit, it did not automatically get the Output Type assigned when I saved. (Like it does for our delivery based labels when I add a user in NACE that previously wasn't identified to get the label.) Is this the normal behavior for HU-based output or am I still missing something in my setup?
2. I did the VHAR step and specified both the Output Determination Procedure and the Output Type of my new label,as suggested. This did work once I finally tested by creating a new HU for a delivery, rather than checking an existing delivery/HU. Is entering the Output Type here critical? If another customer has a different label format, I think assigning the Output Type here this will cause a problem for us. (I haven't had a chance to change the config to remove this and see if the Output assigns based on references elsewhere, now that I know it seems to assign only when the HU is initially created.)
Thanks again!
Dave -
Output determination and output type?
hi all,
wat is meant by output determination and output type?how and y we use it?
regards,
keerthiHi Keerthi,
Output determination is used in message control. You can read more about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
to configure it please use transaction: NACE
best,
Wojciech
<i>please reward points for helpfull answer</i>
Maybe you are looking for
-
Group degradation in perceived performance
Hi there, We recently upgraded to SDK 4.5.1 and noticed that our application took a hit in perceived responsiveness in the process. After digging around a bit I ran into a change in the Group class that is responsible for this degradation, the change
-
Place specific page of multiple InDesign docs in InDesign?
Hello. I have 100 2-page InDesign documents. I would like to place page #2 of all 100 documents into a new document. I'm placing these documents into InDesign at once (via the ability to place multiple documents), but when I choose "Show Import Optio
-
Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?
-
Transfering ppurchased music to other computer
i purchased several albums from itune store to my laptop. and burnd audio CD to import to tower computer. when put CD in tower, it's said "song names not be found online." and playlist information did not show, shows only track number. why music info
-
I cannot use the "Send Contact Request" feature and can't find anything on this problem anywhere. Does anyone know how I can resolve this frustrating issue? Let me know.