Output determination for billing type

hi,
can somebody answer this ,i have a question that,during invoice output determination i need more than one output type to get displayed for selection automatically for a same billing type.
for e,g if i have three output types rd00,xxxx,yyyy.
when i go to vf02 and press issue output then i need all these three output type come automatically,so that i can select from that.
i need the config part pls its urgent.

Hi Ranjeet,
It will be really helpful if you can send me the document to [email protected]
Thanks in advance
Srikkanth

Similar Messages

Output determination for shipment types

Hi SD gurus,
I am new to SAP. I am unable to configure o/p for shipment documents. I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place. an some1 help me through this.
Thanks in advance.

Dear VGR,
Do the configuration settings for the shipment output determination through this IMG path
IMG>Logistics Execution>Transportation>Basic Transportation Functions>Output Control-->Maintain Output Determination for Shipments
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functions
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place.
For he above requirement you take help of ABAPer to develop the output program in such way and assign that program to your shipment output type.
Maintain the condition records through VV71 transaction with Transm. Medium EDI and Email
I hope this will help you,
Regards,
Murali.

Filtering Output Types during Output Determination (for Billing)

Hi Gurus,
My requirement is to filter out a few output types at the time of output determination from the procedure so that performance can be improved. Can you point out the specific place I can code for this?
Is there some FM which is called for output determination,, which I can enhance for my requirement? Or any user exit that I can use for this? Please help!
Regards,
Rahul

Hi Rahul,
In that case you gotta use a new requirement inside your procedure.
Go to Tx NACE, select your procedure and create a requirement rutine which compares the sales organization in your Z table. Using sy-subrc = 0 in case the query finds a value and sy-subrc = 4 if don't.
This way you can determine the output types according to your relation in your Z table.
Then use this requirement in all the output types of your procedure.
I hope this helps
Regards
Edited by: John Smith on Jul 22, 2011 12:04 PM

Out put determination for billing

pls send me output determination procedure and also send screen shots ,pls send its urjunt

hi
GOTO--->IMG--->-SALES &DISTRIBUTION-->BASIC FUNCTIONS>OUTPUT CONTROL--
>Define Output determnation for Billing
OUTPUT DETERMINATION FOR BILLING:
1)first you need to maintain the condition tables
2) maintain access sequence in that you maintain the conditiopn tables
3)Maintain the out put types and uin that you need to assigm the forms for taking the print out after that the above access sequence has to maintain in the condition types with certain settings
4) Assign out put condition types to Partner functions
5)Define the output procedure in that you maintain the Condition types
6) Assign the Output procedure to Billing types

Output determination for Customer Account group - A brain teaser

At the place of configuration for Account groups, there is a field called Output Determination which has values like DB001, DB002 etc which says output for sold to, ship to and so on...
What is the purpose of maintaining output determination procedure at the account group level?
And also, where can i do the complete output determination for it? Like i could see Output determination for sales activities, sales documents, billing documents and shipping...But no where in the img screen, i found a place where i can configure these? Any ideas?

In SAP, we send different output types(read documents) for Inquiries, quotations, orders etc. to relevant partners (read contact persons) sold-to party, ship-to party etc. thru various transmission mediums like ex. Print, Fax, e-mail etc.
Output can be determined by using component output determination procedure. System should know from where the output is to be determined whether from IMG or from customer A/C group. This is depended upon the control that we can activate or deactivate in "Check access for condition type" in definition of the output type (T.Code: NV03)
Output Determination:
IMG > Sales and Distribution > Basic Functions > Output Control > Output Determination Output Determination Using the Condition Technique > Maintain Output Determination for Sales activities/ Sales Documents etc.
Regards
AK
Reward points if helpful

Output determination for partner function in PO

Hi MM Gurus.....
<b>How to determine the out put type for a freight vendor in PO ?</b>
Business scenario : We have a regular vendor from whom we procure material. Also we have different freight vendor which we maintain in condition type for freight.
Now , I want two different output types to be generated for these two different vendor ?
I tried using partner functions, maintained condition records for both vendor with different condition type ..but , system determines the output for only regular vendor and not for freight vendor.
Can anyone please help me resolve this issue ?
Many Thanks in Advance,
Vidyadhar.

Dear Vidhadhar,
OUTPUT DETERMINATION:
Output is a form of media from business to one of its business partners. The output can be sent to any of the partners defined in the document. Outputs are usually in the form of Order Confirmations, Freight List, Delivery Notes, Invoices & Shipping Notifications. Determining form of output is output determination
Types of Output: Print Output, Fax, Telex, E-Mail & EDI (Electronic Data Interchange)
PRINT OUTPUT:
SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents & output det for billing documents.
Create Condition Table: select the field Sales Doc Type from field catalog & Save
Maintain Access Sequence: 4-digits code & description. Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table.
Give the same 4-digit code as given to acc seq to output type.
You Can Maintain:
Languages of Output
Partners (to whom we want to send output)
Print Program- print specification
Sap Script- layout
Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions.
Maintain Output Determination Procedure: Go to new entries & create your own 6-digit code with descp. Select the procedure & go to Control Data. Here mention the output type i.e. cond type & leave requirement and manual only columns as blank.
Determination Rule: link the 6-digit procedure code to doc types.
Create Condition Records: Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name, Suffix 2: order_confir & flag on print immediately.
Once you press enter you will come across 2 key combinations:
During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.
Medium, Time & Language.
Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language.
Reward points if this is helpful.
Regards,
Naveen.

Output determination for ordering address

Hi
In our business, more than one ordering address might be available for the same vendor. Therefore, we need to send Purchase Orders to different Ordering Address for the same vendor.Kindly help how to maintian the output determination for this.
-Prabu

Hi Prabhu
Output determination
What is output?
Output is communication. When we create a transaction in sales & distribution, and save the transaction we may have to communicate to the concerned business partner about the transaction.
Example;
Customer--Purchase Order-VA01 (Create sales Order)- save the sales order- send the order confirmation to the customer
Here the output is Order confirmation
This output is sent to business partner-Customer-Sold to Party
Other Examples: Quotation, Invoice, Delivery note, Packing List
Output determination happens through Condition Technique.
Condition records are very important here. And these records contain answers to following questions.
a)     What is the Output Type? Order confirmation or Invoice etc
b)     Who is the recipient? A Sold-to-party or Payer etc.
c)     What is the media? Take print out and send, or as email? Or Fax? Or EDI (Electronic data Interchange)
d)     When output to be processed? Immediately when the transaction saved or scheduled to happen at particular Time etc
e)     In which language the output to be prepared
Customization:
IMGSDBasic functionsOutput Control
Output Determination
Output Determination using Condition technique
Maintain Output Determination for Sales Documents
Maintain output types
SAP provides standard Output types for sales, shipping, transportation and billing
Sales:
AF00                    Inquiry
AN00                    Quotation
BA00                    Order
RD03                    Cash sales invoice
Each of this condition type has Repository data called Routines
a)     Program---Program that reads data from tables (VBAK / many tables storing data pertaining header etc)
b)     Form routineProgram used for creating layout
c)     Form---Layout
The Output type has an Access sequence
Example: BA00 has access sequence 0010
Access sequence uses sales document type as the field under table 7
SAP provides standard Procedures, Copy the procedure and assign it to the Sales document Type
Select maintain output determination procedure
Position               V10000 (Order Confirmation)
Select V10000 and Copy as
ZV1000 Kirlosakr Order Confirmation
Save
Assign output determination Procedure
Allocate Sales Document Header
Position ZKOR
Sales document Type               Procedure
ZKOR                              ZV1000
Save
Now maintain Condition Records
SAP menuLogisticsSales & DistributionMaster data-Output--sales document
Create VV11
Sales Doc=ZKOR
Partner function=SP
Media=1 Printout
Date=4 immediately when saving transaction
Lang=EN
Now select Communication Tab
Printer= A000 virtual Printer
Save the Record
Create an order and check the Order Confirmation
Create VA01
Save
VA02- sales documentissue output to
Select BA00 and select Print review to see the Output
Outputs for shipping processes customization carried out under Logistics Execution
IMG MenuLogistics executionShippingBasic shipping Functions-Output Control-Output determination---
Maintain output determination for outbound deliveries
Std Delivery outputs
LD00                    Delivery document
PL00                    Packing List
Follow the same procedure, like in sales, Copy the std Procedure and assign to respective documents like Delivery document etc
Output determination for Groups---Used for picking list generation
Output determination for handling unitsfor packing
Reward if useful to u

Output determination for PO

Hi, I don't have much knowledge,waht are the steps and settings required to maintain output determination for purchase order and material document.
Thank you.

Hi,
PO Output
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
GR Output
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Regards,
Biju K

Output determination for PO and MIGO

HI,
Please provide me complete config of output determination for PO and MIGO.
PO print out.
GR, GI,TP, cancellation and return print out
Uts

Hi,
Please go through these steps you can get the GRN Printout
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

Output Determination for Sales Documents distributed by fax/email

Hi Experts,
Can some one guide me regarding what all need to be done to maintain output determination for Sales documents to be distributed by fax/email.
Thanks in advance...
Regards
Vamsi

Hi Vamsi,
Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
I hope it will help you,
Regards,
Murali.

Output Determination for inquiry

Hi,
Can anybody plz tell how do i make Output determination for
1.) Inquiry
2.) Quotation
3.)Contract

set the condition records for all these sales document types using VV11 t.code. ie create condition records for sales documents.
like for example incase of OR we use BA00.
inquiry AF00
thanks
sadhu kishore

Output Determination for Material movement

Hi All,
I am configuring output Determination for Material movement.
In my case, am doing the config when the movement type is 311, we want to generate IDoc.
i have configured everything, output type,output Determination schema..
When i am trying to maintain the condition record for the same through MN21,
here i am facing one problem on Partner Function.
Here what partner functuion i'll give.
waiting for all valuable response.
Regards
Indrashish

Hello Indrashish,
Maintain that output type as partner independent.
This will help.
Regards
Arif Mansuri

Output determination for Shipping order confirmation

Hi,
Im new to the SD module.
I want to send the BOL information to XI as idoc DESADV.DELVRY03.
How am i supposed to do this? Should i create a new Output type?
I guess since im sending this to XI i should maintain the partner function as LS right?

Ive uploaded a document on the steps i have done for setting up a Output type at:
http://www.scribd.com/full/16969034?access_key=key-1tw12d6pow1xa4r6afcs
or
http://www.scribd.com/doc/16969034/Output-Determination-for-Delivery
Still im not successfull in generating the IDOC. Please help.

Output determination for Transfer Order(WMTORD)

Hi Friends,
My Requirement is to send an idoc to an external warehouse when i save Transfer Order.
For that i have created a Partner Profile with message type WMTORD.
When i save the transfer Order if the warehouse number and storage type matches to specific numbers then it has to trigger the given partner profile..for this usually we will do output determination.
Please help in doing the output determination for the above case..i know normal output determination procedure from NACE transaction.But warehouse mangement it would be defferent.please help me,,
Thanks a lot.
regards,
Ravimacha

Hello Ravi,
I would like to generate an outbound idoc (using Message Determination/Control) when a delivery is created (via tcode VL01N). I created a Partner Profile with message type WMTORD.
In setting up the Partner Profile: Outbound Parameters, I didn't find a standard SAP Process Code. Did you find one, if so, what would that be?
(I've found process code WMT1 but it is for inbound.)
Thanks in advance,
Millie

Output Determination For Posted Invoice

When an invoice is posted against a purchase order I need the system to create an IDOC for external transmission.
I already have a partner profile setup for the external party (vendor). How do I go about setting up the output determination?
Thanks - points will be rewarded.

Hello, Brian
To setup the Output determination for Invoice Verification, follow the steps:
You can configure these settings through t.code: NACE
or NACT
By specifying the Application: MR (this is for INVOICE)
Select -> Application MR -> Press Output types
then -> Select your Output type
(choose LIEF, if Output is for External Vendor).
-> goto Details
then
-> choose the relevent fields in Default values Tab (i.e, mainly Dispatch TimeTransmission medium Ex: 5-External send and 6-EDI similarly Partner function Ex: VN-Vendor,etc )
then
-> Processing routines
-> Partner functions
Suggestion: You can use NACE or NACT (either)
Hope this will clarifies you,
Reward, if it helps,
Regards,
Srin.K

Output determination for billing type

Similar Messages

Maybe you are looking for