Output Determination - Goods receipt for Subcon PO

Hi experts,
I have configured output for Goods receipt for PO. Its working fine for standard PO.
But not working for Goods receipt for Subcon PO.
In MN21 - i maintained condition record -
Trans / Event Type - WO
Print Version - 3
Could you help me to resolve this issue.
Regards,
Jackie

Hi,In MN21 you need to do the settings for Output types 'WLB1' for Individual Slip or 'WLB3' for Collective Slip for the Subcontracting Mat Doc. for 541,
Similarly for 101 you need to do the settings for output type WA01, also check in MIGO the 101 document in display, the tick is marked for getting the output. without that tick you will not be able to see & print the Mat. Doc. in MB90.

Similar Messages

Automatic Batch determination at time of Goods receipt for production order

Hi SAP experts,
Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
I have done the following settings:
1.Specified batch level at material level
2.External batch number assignment
3.Defined production order condition table '501' (plant/material)
4.Defined production order access sequence (order type-plant -material)
5.Defined Production Order Strategy type.
6.Defined Batch search procedure in Production Order.
7.Assigned Batch search procedure to Production order type for a particular plant , batch check not activated.
Please let me know of any more settings to be checked for the same.
For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components is taking place for 1 EA qty. from 5 different batches.
So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
It is desired that the system should do GR for the qty. 1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
Thanks in advance. good day.
Best regards,
RB

HI Rahul,
As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
I am not sure if i understand your requirement 100%.
But let me explain you standard behaviour.
When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
Check and Revert,
Santosh Sarda

SAP how to determine the account in Goods receipt for purchase order?

We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?

HI
This is again based on the movement type which SAP has created a link internally.
So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
Good luck
Hari

Problem for Goods Receipt for Subcontracting Purchase Order

Dear all,
Presently, we are using SAP version 4.6C and we need to introduce GR for
Subcontracting Purchase Order. We have developed a ABAP program to handle
subcon Goods Receipt by uploading flat-files from our subcontractor. The
scenario is as follows :
Goods Receipt for Subcontracting Purchase Order
1. In the ABAP program, function BAPI_GOODSMVT_CREATE will be used for goods
movement.
2. Data provided to the function are as follows :
- Posting date
- Document date
- Material number
- Plant
- Storage location
- Batch
- Movement type (101)
- Quantity
- Purchase order number
- Purchase order item
- Movement indicator (B - Goods receipt for purchase order)
3. The function will do data verification and automatically determine GI
item for subcon stock:
- Movement type (543)
- Special stock (O - parts prov. vendor)
- Material
- Quantity
- Plant
Our problem is that :
Only the GR item in the interface is to be transferred and the GI item is
determined by the system. So, the quantity for subcon stock cannot be
changed using this BAPI. Then the system will continue processing the goods
receipt and create material document.
Manually, by using transaction code MIGO, the user can display the subcon
stock data and then change the quantity.
By using transaction code MB01, after the user fills in all the GR fields,
the system comes to line item 002 (subcon stock data) and then quantity can
be changed.
As per user requirement, quantity for GI item must be same with the quantity
that has been transferred to subcon vendor in Delivery for Subcon
(transaction code VL02N).
We cannot achieve this requirement by using the BAPI mentioned above. Would
appreciate any valuable help from anyone who is able to help us on this
matter. Are there any other BAPI's that can help us to achieve the same
result ?
Thank you in advance and best regards.

As far as i understood the problem I suggest u to create the
BDC according to user actions that are performed in he manual
operation.
I can't say that the BAPI performs the exac solution what you want.
I have done some BDC work using MB01 and suggest you to be careful
and try to keep the complete in the logic as some chages in rows in BDC will
change the complete scenario.And throw correct quantity val in correct
material
row.
This methodology will help u even in mass uploads.
Or in case of automation u can perform the call transaction BDC in
background mode.
so As per my understanding bdc program is the solution. pls try and let me
know.

Doing a goods receipt for a customer material that is ASEQ status

We are needing to find a way to be able to do a goods receipt for a child part in ASEQ status. Most of our customers will send in their part after disassembling it themselves. Since we can not receive the part our present process is to dismantle so the system status changes to ESTO and we can receive. The problem with this is that the end user forgets to assemble the part back and we end up breaking the linkage.
We have looked into using User Status in the equipment master and have configured that. However the user status button, nor name shows up in the equipment master. I have looked at the field selection in IMG and it is not hidden. I am assuming it is being supressed by a user exit we have.
Can anyone give me any suggestions on how we can improve the process using SAP for material that is ASEQ status and being able to create an inbound delivery so we can receive in our warehouse for this status without dismatling the unit?
We are on ECC

Hello Kimberly
You lost me while describing your current process, so please provide more details as to how you dismantle and reinstall etc. Also how the part goes back to the customer.
However I can provide you clarifications to some questions you raised..
You see both system and user statuses in the field 'Status' itself. This is the 3rd row in the Equipment display screen under Equipment number and Description. If you see carefully you will see 2 sections, the one on left is system status and the one on right is User status. If you click on the i (info) icon, you will be taken to a screen where you see more info like status and business processes etc.
ASEQ is a system status and it is determined by what you did ( example dismantling) and can't be changed by you (user). If you see the 'Business Processes' tab, you will also see the this won't allow assignment to a Delivery and so on. So my point is having a user status will not help you. Based on the combination of system and user statuses, some processes are permitted, some not. For example if Goods Receipts are allowed, may be you can receive without an Inbound delivery. I am mentioning this as a thought initiator, I know you will have a Return/Repair order process including a return delivery.
I guess you have to systematically prevent the user from doing whatever they are doing out of turn, e.g., forgetting to reassemble (install?) and for this User statuses can help.
Let us know your process more in detail and I am sure SAP will have a standard way to receive a child part of a big assembly. Other members will share their practices also.
Take care.

Problem in picking base value from PO while doing goods receipt for multiple POs

Hi,
Our user is trying to post goods receipt for two purchase orders which have same vendor. After the materials of two POs are allocated in the item detail screen and checked the item ok, system throwing error as "Please check the base value of the item is zero" ( also excise tab does not appear for last three line items). This error does not occur when we are trying to do the goods receipt separately for each POs. Only when we do goods receipt for both the POs together, we are facing this error.
Please let us know what could be the reason. Is there an issue with standard CIN? Any notes to be applied? Please help!

Refer these notes for the issue.
1528009 - MAA: incorrect distribution of goods receipt
quantities
and
1677707 - Determining the valuation type for stock transport orders
at the time of GI
For Excise tab not appearing, you have to check J1ID for "Material-ChapterId combination" and "Cenvat Determination".
Regards
Binoy

Partial Goods Receipt for Inbound Delivery

Hello Frends,
We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible -
1. Goods Receipt in Inbound Delivery - Transaction VL32N : In this transaction,ssytem allows goods receipt for complete quantity but not for partial quantity
2. Goods Receipt reference to Inbound Delivery - Transaction MIGO : In thsi transaction, there is a provision to generate partial goods receipt however system not updating the status in inbound delivery document.
In this regard, requesting your support on what is possibility to fulfill our requirement, is there any standard SAP approach for this.
Appreciate your support. Thanks
Best Regards,
Goutham

Hi,
Thanks for your quick reply..
I have a outbound delivery with 100 EA, now system automaticallly generates a Inbound delivery for 100EA using output message. Now we need to generate partial goods receipt for the inbound delivery, mean first 20, then 40 and the remaing.
What are the best practices available since when I check from the Inbound delivery,we cannot make partial goods receipt.
Best Regards,
Goutham

Movement type for a goods receipt for u201CRelease order for a PRqRel"

There is an intercompany sales at our case. Plant B enters the customer order by VA01. The requirements rooting from the customer order are bought from plant A by Plant B. u201CRelease order for a stock transfer requisitionu201D is created automatically by entering the customer order and later using the TCode MD02. By this way Plant A can see the reauirements fort he customer order at Plant B. For the test purposes, I want to make a goods receipt for the u201CRelease order for a stock transfer requisitionu201D. The receipr will be at the Plant A but the customer order is at the Plant B. By the way, I have to point out that Plant A and Plant B are assigned to different company codes. How can I make the goods receipt? I cannot use 561 E. Because customer order belongs to differen company code. I fact, production should be done for this aspect but I donu2019t have enough experience for producing the goods by myself. Which movement type should I use for making a goods receipt for the u201CRelease order for a stock transfer requisitionu201D at Plant A?
Thanks in advance fort he answersu2026

Hi,
This is controlled by the schedule line category In VOV6.
Just check which category is used in your scenarion and change the movement type here. (I think your entry is NC)
They are determined by the item category and MRP type in SPRO - SD > Sales > Sales Documents > Schedule lines
Steve B

Goods Receipt for PO using BAPI

Hello,
I need to do a goods receipt for a purchase order using bapi_goodsmvt_create for movement type 101. My function module does not return the material document number. Can someone help me with my code?
Thanks,
A.P.
FUNCTION Z_GR_BAPI.
""Local interface:
*" IMPORTING
*"     REFERENCE(I_CODE) TYPE GM_CODE
*"     REFERENCE(I_MOVE_TYPE) TYPE CHAR3
*"     REFERENCE(I_EKKO) TYPE EKKO
*" EXPORTING
*"     REFERENCE(E_DOCUMENT) TYPE BAPI2017_GM_HEAD_RET-MAT_DOC
*"     REFERENCE(E_RETURN) TYPE BAPIRET2
*" TABLES
*"      T_EKPO STRUCTURE EKPO
Structures for BAPI
data: gm_header type bapi2017_gm_head_01.
data: gm_code    type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item    type table of
                   bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
data: x_ekpo type table of ekpo with header line.
   x_ekpo[] = t_ekpo[].
clear: gm_return, gm_retmtd.
refresh gm_return.
gm_code-gm_code = i_code.
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_header-pr_uname = sy-uname.
loop at x_ekpo.
    gm_item-material = x_ekpo-matnr.
    gm_item-plant = x_ekpo-werks.
    gm_item-stge_loc = x_ekpo-lgort.
    gm_item-move_type = i_move_type.
    gm_item-mvt_ind = 'B'.
    gm_item-stck_type = space.
    gm_item-entry_qnt = x_ekpo-menge.
    gm_item-entry_uom = x_ekpo-meins.
append gm_item.
endloop.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      GOODSMVT_HEADER             = gm_header
      GOODSMVT_CODE               = gm_code
     TESTRUN                     = ' '
    IMPORTING
      GOODSMVT_HEADRET            = gm_headret
      MATERIALDOCUMENT            = gm_retmtd
    MATDOCUMENTYEAR             =
    TABLES
      GOODSMVT_ITEM               = gm_item
    GOODSMVT_SERIALNUMBER       =
      RETURN                      = gm_return.
e_document = gm_retmtd.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
         WAIT          = 'X'.
     IMPORTING
        RETURN        =
ENDFUNCTION.

Hi,
This piece of code may be helpful.
Structures for BAPI
data: gm_header type bapi2017_gm_head_01.
data: gm_code    type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item    type table of
                   bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear: gm_return, gm_retmtd. refresh gm_return.
Setup BAPI header data.
gm_header-pstng_date = sy-datum.
gm_header-doc_date   = sy-datum.
gm_code-gm_code      = '06'.                              " MB11
Write 551 movement to table
clear gm_item.
move '551'        to gm_item-move_type     .
move '000000000040001234' to gm_item-material.
move '1'        to gm_item-entry_qnt.
move 'EA'       to gm_item-entry_uom.
move '0004'     to gm_item-plant.
move '4000'     to gm_item-stge_loc.
move '201'      to gm_item-move_reas.
Determine cost center per plant
case xresb-werks.
    when '0004'.
      move '0000041430' to gm_item-costcenter.
    when '0006'.
      move '0000041630' to gm_item-costcenter.
    when '0007'.
      move '0000041731' to gm_item-costcenter.
    when '0008'.
      move '0000041830' to gm_item-costcenter.
endcase.
append gm_item.
Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
       exporting
            goodsmvt_header = gm_header
            goodsmvt_code    = gm_code
       importing
            goodsmvt_headret = gm_headret
            materialdocument = gm_retmtd
       tables
            goodsmvt_item    = gm_item
            return           = gm_return.
   call function 'BAPI_TRANSACTION_COMMIT'
       exporting
            wait = 'X'.
regards,
keerthi.

Production operation external processing goods receipt for subcontract PO

Hi PP/MM experts,
I searched for existing forum entries but no luck or final answer.
I have a question about the goods receipt for a subcontracting PO that is account assigned to an operation of a production order (external processing for operation).
The following situation:
Production order type PP02 - external processing
There is only one operation in the production order with control key PP02 - external processing. I marked the control key PP02 in configuration for 'Automatic goods receipt'.
I created a PO for the PR is the operation
When I'm doing the goods receipt of the subcontrating PO a 101 posting is triggered for the finished product and components are consumed by 543 O movements. So far so good. But the inventory for the finished style is not increased. In MIGO I even see that even a batch number for the finished product is determined. Looks like that only the service is posted but not the inventory. I assumed when I mark the operation contol key for 'goods receipt' that the MIGO will also post the inventory for the finished style.
Reason for PP order and not only subcontract order is that we want to manage capacities of external suppliers with PP capacity planning.
Is that a bug in our system or normal behaviour? We use SAP ERP 6.5 with IS AFS.
Thanks in advance for your answers.
Best Regrads,
Harry

Hi Rizzi and all others,
thanks for your replies.
I'm using a production order for the following reasons:
We want to use capacity planning for external suppliers. At least to have some overview of work they have to do in a month
The external assembly can also be changed to internal assmebly and for that reason we will start always with the same kind of document -> production order.
But one more thing what is really confusing. In the materials document list MB51 the 101 movement for the service is listed even if the inventory was not increased. That is really confusing for the users.
Best Regards,
Harry

Goods Receipt for Account-assigned Purchase Orders

Hello,
We want to make Goods Receipt for Account-assigned Purchase Orders. When we try, SAP gives the error 'Account determination for entry PCOA KBS 0001 not possible'. According to SAP online help, account assignment is adopted from the purchase orders for the transaction/event 'KBS' and we cannot assign transaction key 'KBS' to an account using transaction OBYC. How do you make it work? Any solution pointers will be appreciated and rewarded.
Thanks,
Venu

create an implicit enhancement point in function module CKMV_AC_DOCUMENT_CREATE.
IN STRUCTURE IT_ACCIT U CAN MODIFY THE gl ACCOUNT IN RUN TIME .

Batch number issue when posting goods receipt for Subcontracting PO

Dear expert,
I always heard there will be issues while posting goods receipt for subcontracting PO. If the component is managered by batch.
No batch number will be proposed during PGR in MIGO...
I dont quite understand where is the issue??
My understanding:
We have batch managered components and End Product. All have batch numbers, then we PGI the stock to 'SC stock' via 541 movement type.
Then Vendor will finish the end product and send us back the end product.
We consumption the components use 543 O movement type? And GR the end product..
So while goods receipt, the sytem just need pick the existing batch number for both components and finish products..
Where are the issues???
Thanks.

Hoo Laa wrote:
I have questions for people always mentioning there are issues with batch determination while post goods receipt for subcontracting orders.
>
> I am thinking maybe they didnt active the batch determination for 543 movement type..
>
> Thanks.
Hi Hoo,
You are right!!
Setting of batch number determination has its importance in Mvt Type be it 541, 543....
The issue you might have observed would be with Batch Determination in Goods Issues which folks find it bit tough to achieve n make it work for them.
Cheers!!
Shiva

Goods Receipt for Subcontracting PO

Hi,
I got an issue like this....User has Created and posted Sub contracting PO.
and when we tried to enter Goods Receipt for this SUbContracting PO system is giving an error like this
<b>"No special stock O of the material (batch ) exists in storage location for 0000000333 331/18237".</b>
Any one can tell me how to resolve this issue....
Thanks and Regards

Dear MK,
Once Subcon PO is created, we have to send the child components to vendor. This can be done either by MB1B or ME2O.
Once these components are issued to the vendor, we can view them at MMBE stock over view as 'material provided to the vendor' OR by T-code MBLB.
In your case, probably user has not followed the above two steps and hence the error.
Regards
Ravi

User Exit for MSC2n( Batch) while doing a Good receipt for an order

Is ther any exit to update the Date1 field(MCHA-FVDT1) in MSC2n( Batch) while doing a Good receipt for an order
Thanks in advance

Hi Varsha,
Try these User Exit.
BATCHCHK Function Module Exits for Check in Case of Batch Change
MBCFC010 Propose batch number on Inventory Management item scree
SAPLCHVW Batch where-used list
SAPLMHD1 Shelf life expiration date
SAPLV01D Determining the initial status of a batch
SAPLV01P Function Module Exits at Time Batches Are Updated
SAPLV01Z CFCs for internal batch number assignment
SAPLV1ZE CFCs for external batch number assignment
SAPLV1ZN CFCs for batch valuation in VB_CREATE_BATCH
Regards,
Vijay

Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MG

hi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P

Output Determination - Goods receipt for Subcon PO

Similar Messages

Maybe you are looking for