Output determination in MIGO

Hi,
I would like to print out GR automatically after document saving. I had customize everything what is needed in NACE and in other places in spro. Just one thing has left. I don't know how to customize default value in checkbox "Print via Output Control" in MIGO. I donu2019t want to set this indicator every time during GR creation. How to do it?
Thanks in advance
KG

Hi,
This indicator is preselected if the parameter NDR has been set to X (capital letter!) in the user master record.
Regards,
Shailesh Mackwan

Similar Messages

Output determination for PO and MIGO

HI,
Please provide me complete config of output determination for PO and MIGO.
PO print out.
GR, GI,TP, cancellation and return print out
Uts

Hi,
Please go through these steps you can get the GRN Printout
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

MIGO output determination

Hello MM Gurus,
What is the function of CONDITION RECORDS and ACCESS SEQUENCE for output determination in IM level.
Secondly I am trying to define a new output type for label in Tcode NACE . Can you explain me in detail what are the steps I have to carry to configure this.
Thanks

Hello,,
Pls follow the below steps:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2 for MIGO_GR
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Pr indicator for GR docs, for mvt type 101 maintain Print indicator as 1.
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants and Sto Locations for WE01, WE02 and WE03.
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing GR doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Regards
Mahesh Naik

Output determination for inventory management

hi everybody,
i have gone through total configuration of output determination of invetory management and suceeded in getting printout of GR but the problem is when we post gr in migo with movement type 101 it is no capturing output type we01 or we02 or we03. so when we go to mb90 there is no output type determined. then we have to go to mb02 and manually assign the ouput typ we02 and save it and then again get the printout through mb90. so can anybody tell me regarding the default settings of output type to come in mb 90

Hi
Check following if usefull to u
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Vishal...

Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MG

hi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P

Output Determination @ IM Level

Hi,
We need to print out a label whenever we make a stock transfer from IM Managed S.Loc "A" to IM Managed S. Loc "B" using 311 movement type. Can anyone please explain me the steps for the output determination based on the condition when movement happens only from S.lOc "A" to S. Loc"B".
Thanks,
Sen

Hello,,
Pls follow the below steps:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2 for MIGO_GR
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Pr indicator for GR docs, for mvt type 101 maintain Print indicator as 1.
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants and Sto Locations for WE01, WE02 and WE03.
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing GR doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Regards
Mahesh Naik

Create Good Movements outputs T/C MIGO

Hi, expert
When I try to display T/Code MIGO with X material number and types of outputs (1. Individual Slip 2. Individual Slip with Inspection Text 3. Collective split) show me the message <b>The system could not create any outputs</b>.
On help it says:
Possible resons:
1.- Output determination has not been configured properly in Customizing.
2.- A material document printout is not planned for the movement type.
On NACE -> Application = ME, outputs types I have WA01 on process routines :
Program          ZSAPM07DR
FORM routine ENTRY_WA01
Form               ZWA_SCHEINVERS1
On SPRO -> Material Management ->Inventory Management and Physical Inventory:
On Print Control->Assign Forms (Layout Sets) for Print Reports I have
Report       :     ZSAPM07DR
Report Title:     Module Pool for Goods Receipt/Issue Slips Print
Version     :      1
P              :
Act           :      (checked)
What do I have to do or if something is wrong? Please I need a help as soon as possible, thanks in advance.
gabriela

are u taking print out from which Tcode ?
have u given output type manually ?
are u taking print out from which Tcode ?
A: First I excecute MIGO, message are recorded(now it doesn't work) and after I go to MB90 to watch .
-> here have u seen any output types in output controlshave u given output type manually ?
A: I don´t know
---> try to give output type manuallly then try.
If any issue with Config , here itselg it will raise errorsRegardsPrabhu

How to print the GR tag using customised output in TCode MIGO?

Hi All,
I created one customized output type for transaction MB90, it working fine for this transaction. So now my client want same smartform to be used in MIGO transaction. I confirgured same, whenever we post the document in MIGO it should the print the GR tag automatically, its not happening i.e its not prininting the GR tag.
I want to print the GR tag from migo using z-output type. Pls let me know the solution.

Hi,
Please chek the following.
1. Txn. NACE... Choose "ME" and click on "Output Types" ... check in you output types did you maintained the Form (WE01, WE02,WE03)
2. Txn. NACE....Choose "ME" and click on "condition Records"... here maintain the details
Trans./Event Type: WE
Print Version: 1/2/3
Print iten: 6
Med: 1
Dat: 4
Lang: EN
Under Communication maintain the "output Device" and flag "print immedi" and "release output"
SPRO>MM>Inventory Management and Physical Inventory-->Output Determination..
Here maintain the details
1. Maintain Conditions
2. Assign forms and Program
Regards
GK.
Edited by: Gnana Kumar on Nov 11, 2010 11:46 AM

GR output determination

Hi all,
Can you pls let us know the prerequisites for the output determination of GR. Also pls let us know the process of getting the
"Output tab" in the Material document.
thanks & regards
Chaitanya

Hi,
Check following steps for GR collective printing
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Note:
WE01-INDIVIDUAL SLIP PRINT SELECTION IN MIGO
WE02-INDIVIDUAL SLIP ALONG WITH INSPECTION SLIP
WE03-COLLECTIVE SLIP IN MIGO
For material document ,,,,,Run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03
Regards,
Biju K

Purchase Order and GR document Output Determination and creating own logo o

Can anyone let me know the process of output determination of PO and GR documents.
Also let me know the way to incorporate my own logo on the documents

Hi sudip
For the logo on documents, you have to take help of ABAP ppl.
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document.
Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02

Output determination ----Urgent

Hi , I got a problem regarding Output determination in SD.
There is credit memo , created based on an invoice. When iam taking the "Print preview " at the header level of the credit memo, " the Reference no./Date "
is not showing anything.
When Iam checking the "Edit" button at the header level and then clicking on the "Processing Log", it is showing the following information:
    1. Object 0062000080
     2. Output type: Order Confirmation
     3. Processing log for program RVADOR01 routine ENTRY
     4. Appl. V1 - Problem during data retrieval -
         Table/structure   VBAK
     5. Window TITLE is not defined for form RVORDER01
     6. Element HEADER_DATA window MAIN is not defined
        for form RVORDER01
     7. Element HEADER_TEXT window MAIN is not defined for
         form RVORDER01
So, plz help me resolve this issue . What is the error and how to resolve this error?? Its an urgent case
Thanks with regards
Sourav Bhaumik

Dear Sourav,
          Chect the output type program RVADOR01 with the help of the ABAPer then debug the program then you can come to know what is the exact problem.
-->Before you Check the output determination assignment to the Creditmemo and output type assignment.
I hope it will help you
Regards,
Murali.
Edited by: Murali Mohan.T on Mar 31, 2008 8:34 AM

Print HU label from Outbound delivery using output determination

Hi,
We have a business requirement to print HU labels from outbound delivery. The steps followed are
1) User executes VL02N
2) User clicks on packing
3) Material is entered to pack. HU is automatically generated.
4) After saving the delivery, output message is triggered.
Output determination is as follows
1) An Z output type is created.
2) Form entry and smartform name is assigned to this output type
Issue:
The issue is when the output message is triggered and the code in the form entry is executed, the handling unit (from nast) is not yet committed in the database. Since it is not updated in the database table, we cannot get any handling unit data to be printed.
Any inputs on how to print HU labels using output determination from outbound delivery is appreciated.
Thanks,
Sandeep

Hi Surya,
Thanks for the reply. But, my question was how to print labels from VL02N when i pack a material on this delivery.
Regards,
Sandeep

How to re-run output determination after goods issue through idoc

Hello,
i've got a question about output determination. We are currently in a process to automate picking, packing and goods issue through a 3rd party software. The software creates DELVRY03-Idocs including picking, packing and goods issue-information. Picking, packing and goods issue work just find and after submitting the idoc, the delivery is updated as needed.
The problem arises when it comes to printing the shipping document on the printer belonging to the picking station that just processed the delivery. To determine the correct printer, the external software includes the picking station number inside the idoc. A user exit in idoc_input_delivery puts the number (3 digits) into likp-traid. The customizing for using this field inside output determination is complete and seems to be working.
The problem is: as the number of the picking station is not known before goods issue, the LD00 message must not be generated before goods issue. I used the appropriate condition insinde the message scheme, the message is not generated until goods issue is complete. After processing the DELVRY03-Idoc, the message should be found and generated, but it isn't. When i take a look at the delivery after submitting the idoc, goods issue is complete, picking and packing is done - and no sign of an header message of type LD00. First i thought about a misconfiguration inside my customizing for output determination, but when i access the delivery via vl02n (change delivery), output determination seems to be processed again and without making any changes or actions, LD00 is generated and waiting for processing. After saving the delivery, LD00 is processed and the shipping document is printed exactly where it should be.
So, as my customizing seems to work and everything else around idoc processing doesn't make any problems either, i conclude that, after processing the idoc, R/3 just needs a little kick to re-run the output determination, find the now fitting condition for LD00, find the appropriate entry in the condition table and print the document.
I already tried report rsnast00, but this one just seems to run already created messages.
Any ideas how to automate this little "kick in the butt"?
Thanks in advance!

I'm working on a similar issue with ws_delivery_update. I'm not using the IDOC as you are, but I'm using the function in a program of mine to PGI the delivery, but the output isn't being added to the delivery. I've tried to run the function twice as you suggested, but that doesn't seem to work. Do you have any suggestions or ideas on things to try?
Thanks,
Eric

Email PDF file name issue via output determination - order confirmation etc

Hi,
I can email pdf files via output determination. Unfortunately the file name is same as sapscript name. How do I change it to the name I want for example document number.
Thanks,
Jai

Hi Jaideep,
You can change the mail title at Output determination.
T/code NACE--> Application > Outputtype> Select O/P --> select Mail title and texts --> specify your text( with language) in "title" .
Whenever Script send via e-mail the text you have entered will apear as mail title.
Hope this may help you.
Lanka

Field catalog not appearing in the condition table for output determination

Hello,
I wanted to include WBSTK as a condition table entry in the output determination for outbound deliveries, WBSTK is available as field catalog , but not available during condition table creation.
Can you pls help me out?
Regards
Vaidee

Check OSS Notes
379619 - Preference process in SD order: Prefrnc ID missing
595984 - Preference indicator in SD order
379269 - Preference in SD doc: User exit: Set pref. indicator PREFE
Regards

Output determination in MIGO

Similar Messages

Maybe you are looking for