Output device configuration

Hi All,
I need to configure output device i have lexmark LXT44 model. when i check for LXT644 in SPAD i cannot find ,so can i use ZSAPWIN instead of LXT644. I have 4.6c HP-UNIX. Please let me know what needs to be done from my side.
Thanks &Regards
Shams

Hi
Please go through the below mentioned links:
1) Output devices in SAP Spool System : http://help.sap.com/erp2005_ehp_04/helpdata/EN/fa/7620dea7c111d18dff0000e83dd9fc/frameset.htm
2) Defining a New Device Type
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d9/4a956e51ea11d189570000e829fbbd/frameset.htm
3) SAP notes :i) 1103422 - SAP Printer Vendor program: Installing device types, etc.
ii) 1135058 - Printer Vendor Wizard Note: Lexmark
4) Also, for model & device type combinations: http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/1015a496-94d5-2b10-3c8e-845ff55480c0&overridelayout=true
Ravi
Edited by: ravi raj on Nov 5, 2009 7:38 AM
Edited by: ravi raj on Nov 5, 2009 7:40 AM

Similar Messages

Output device DKRDSP029 is locked in the SAP system - RFC error

Hi,
One user of the system has got the following error when he is loading his "Change Office and communication" iView in the portal. This is the SAP standard DK used iView!
No one else has this error in the system as far as we know and the DKRDSP029 is a printer. I had no idea that a printer was connected to this information but apparently there is.
Does anyone has any input to what the problem actually is?
Thanks :-)...
Start of the stacktrace:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Output device DKRDSP029 is locked in the SAP system , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCGetDetails(FcCodBusinessLogicComp.java:472)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onInit(FcCodBusinessLogicComp.java:228)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onInit(InternalFcCodBusinessLogicComp.java:512)
at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onInit(FcCodBusinessLogicCompInterface.java:115)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.onInit(InternalFcCodBusinessLogicCompInterface.java:147)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.onInit(InternalFcCodBusinessLogicCompInterface.java:227)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)

Please check if this user has any default output device configured in the corresponding backend system. (from SU01)
If the printer/output device configured for this user is DKRDSP029, there might be a problem with the printer setup.
You can try and change the printer to a different one if required.
Thanks,
Shanti

How to assign an output type to an Output Device?

How to assign an output type to an Output Device?
I'm using SSF_GET_DEVICE_TYPE to get the device type. But for that device type there is no output device configured. How to do that one. I'm getting the output type as PDF1.
Please help me.

Hi,
Guess u need to maintain it in SPAD transaction.
Cheers
VJ

How to configure output device option

DEAR ALL ,
                  I have been facing problem in taking printout in line printer(lp04) with page dimension 305 mm * 215mm for transaction mb90--> output type -->we03 which is not giving the option to choose output device type before print preview option. how will i configure output device for standard output types.

Hi sonu sonu,
   For Your concern you have to discuss with BASIS whehter printer(lp04) with page dimension 305 mm * 215mm is present or not.
   Or else go thru SPAD and check whether that printer has that Page Format or not ???
Regards,
Suneel G

For m.type 261 goods issue output device need to be configure

Hi All,
As above said in the subject line is there any way to configure output device for m.type 261 goodsissue
I want to configure output device only for m.type 261 not for other m.types so kindly let me know the configuration settings.
regards
sapmm

The configuration steps are under:
IMG \ Materials Management \ Inv. Man. and PI \ Output determination . . .
Condition Tables
Access sequence
Output Types
Procedure
You want a small Requirement (an ABAPer could create in minutes) for your Procedure that limits the output according to Movement Type 261.
Regards,
Nick

Test report to check output devices?

Hi,
Is there a test report that will print a page so I can check if the output device is working OK and printing like it should? I have create a output device with a device type but now I would like to check if it's configured OK. Is there something I can print to check that? So resolution, margins etc.
Thanks!

Hi,
Just go to SM50 and press the printing icon there. Is not a large report but you can see the resolution and margins there.
Hope this helps you.

Is there a way to have Firefox respect the default audio output device when it has been changed while Firefox is open?

I have been a Firefox user for many years and I still use it as my primary browser. One problem that has bothered me for years is the fact that when Firefox is open and I change my default audio output device, Firefox doesn't respect that change and continues playing audio through the device that was originally being used. Even if you stop the audio and continue playing, the output device doesn't change.
Is there any way this can be configured in Firefox? Now if I listen to music online (e.g. Soundcloud) I always use Chrome since it's respects the default audio output device change even while in the middle of playing audio.
Reproduce:
1. Start playing audio (e.g. from a YouTube video; HTML5 and Flash are affected)
2. Change your default audio output device
3. Audio will continue to play from original output device
Thanks!

This is the same issue that has plagued me for years. I always thought that this was a Flash plugin issue, but it does occur on HTML5 as well. A friend of mine verified that this does not occur in Linux, but only on Windows. It would be great to have this fixed, as it's honestly the only thing that's making me use Chrome all the time, as I don't want to have multiple browsers open.

Output device not defined error while saving the quotation

Hi all,
We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1. Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is displaying an error as 'Output device not defined'. If i remove all the output types while changing the quotation in VA22 from header, it is processing.
I checked with all other output types combination. The error is trigerred only when we have ZJT output type along with ZQTO.
We are not able to recognise the error. Please help out to solve this issue. Its very urgent.
Thanks.

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

Default output device not coming

I made one PDF form and attached it in List LG01 in CB85 to print process order through COR2 output device is mentioned as LP01 in list Lg01, but while printing, output device is coming as which is mentioned in user profile.
I want that output device which i mentioned in configuration should come as default during printing through COR2....Pl. help
Edited by: lisa harley on Feb 26, 2010 11:09 AM

Hello,
Please check the below settings at "Printer Specification" for CB85,
If output device = 1 ,then it will select the output device for user profile
if output device = 2 , Output device from configuration, ie CB85
Regards
Pradeep

The device is in use by another process - error - cannot select Multi Output Device - Mac OSX 10.8.2

Dear Adobe Users!
Please help!
I'm using Adobe Audition CS5.5 on a Mac - OSX 10.8.2 (latest version of Mountain Lion) and I'm trying to select a Multi-Output device.
This was working FINE last few days - today, I get an error. I've tried to re-install Adobe Audition and that hasn't fixed the problem. When it first started up it said it couldn't find any audio devices at all.
Please can you help? I'm getting a message saying the device is being used by another process - but it's not being used by anything else at all!
Hope you are able to help! I use the multi output device option so I can record what I can hear. I spent two days trying to sort that out after it all-of-a-sudden didn't work last Thursday.
Now just spent last two hours trying to get Adobe to recognise the Multi Output device - it's been working fine last few days!
Many thanks if you're able to help!
- Rory

Durin,
May have sussed it! It seems that Built-in output was the way to have it for Audition CS5.5 to record what I'm hearing! Yes, the multi-device needs to be used - but in another settings.
Here's how I have each section configured and it now works!
First of all, in Audition > Preferences > Audio Hardware:-
Then, on the Mac's OS - System Preferences > Sounds (input settings)
Then Output settings :-
Then Midi Settings found in Finder > Applications > Utilities > Audio MIDI set up
All now seems to be working! I'll let you know if anything further happens!
I was certain I had the output device as Multi Device Output on Adobe before, perhaps it should've been set to Built-in Audio all along. Anyway, I re-installed my Mac from Time Machine, logged in as another user and it worked under that profile, then logged back in as me - and am using the settings in the pics above and all seems to be working!
It's been a long week, perhaps I was just going around in circles and didn't actually test these particular settings yesterday in this order after all.
Thanks again for your help! Sorry if I've caused any confusion!

Switching audio output device without pulseaudio

I frequently use a USB sound card with a pair of headphones, which had been playing nicely with Gnome and Pulseaudio. Gnome provides a GUI to switch between output devices which seems to work well, but requires Pulseaudio. Long story short, I'm in the middle of switching away from Gnome to a lighter WM setup and I have everything working but am not able to figure out how to switch between sound cards on the fly. I don't want to keep a bunch of Gnome dependencies just for this.
I tried a "slots" configuration (http://alsa.opensrc.org/MultipleCards#T … .22_method) which set my USB card to slot 0 and my built in Intel audio to slot 1. This got my USB card working when it's plugged in, but now I get no sound at all when it's unplugged. I've checked the volume settings with "alsamixer -c 1" and everything is unmuted and loud, but still nothing.
Shouldn't the system fall back on card 1 if card 0 is unplugged? How can I make this happen?
Thanks.

GogglesGuy wrote:I use asoundconf: http://aur.archlinux.org/packages.php?ID=23382
That still requires restarting running applications for the change to take effect, no?

Output device-adobe doc services

Hi ,
i need an output device to be configured for adobe document services in SAP ECC 6.0. this output device is used for adobe forms. tell me which printer need to be configured in SAPD transaction.
with regards,
ravi valluri.

Hi,
I do not see much relation between configuring a printer and the Forum "SAP on Oracle"
I think you should post this question on the "SAP NetWeaver Administrator" Forum

Output Device LOCL is not type PDF1

Hi
I can see the payment specifications waiting to be sent in SOST. But I am getting the error message (below) when I try to print them off. I cannot print. I need to be able to print out the payment specifications by batch. these payment specifications are in .pdf format
Output device Output Device LOCL is not type PDF1
Message no. TD429
Diagnosis
You have selected an output device that does not have device type specified.
System Response
The system will not accept this output device.
Procedure
Please enter an output device of the proper device type. The possible values pushbutton allows you to display a list of devices you can enter here.
Please help me,
Al Mamun

Hi,
check this link:
http://help.sap.com/saphelp_nw04/helpdata/EN/38/5bc3f2e4bd11d18e2b0000e83dd9fc/content.htm
and configure LOCL printer in tcode SPAD correctly.

Output Device FTP

Hi All,
In SPAD there is output device FTP defined by SAP. I am trying to use this output type to send report output to FTP server.
When I run the report, I choose option List--> Print. In the pop up box I can enter printer name or E-Mail or FTP.
Does anyone know what is the configuration setting in SPAD for FTP output type? Do I have to enter a command that will trigger the FTP server.
Thanks and Have a great day.

Do you mean your optical drive is not listed? What is listed…for example, Hard Drive?
What are your system specs?
Russ

Output device for adobe forms

Hi,
Pls let me know which ouput device should be used for adobe document services documnet(adobe froms). I'm unable to view the ouput.
Also pls tell me how to configure the output device in SPAD.
regards,
ravi valluri

Hi Ravi,
Please refer to the note - <a href="https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/no_display_pdf/sapnote.pdf?numm=685571&vers=0000000000&language=E&sap-language=E">685571</a>
Hope this helps :).
- anto.

Output device configuration

Similar Messages

Maybe you are looking for