Output device is locked

Dear all,
GRIR Clearing background job was cancelled due to the following error.
Output device LPxx is locked in the SAP system.
Could you please let me know how to find out this error?

Discuss with your basis team about opening the printer.
Sounds like it was in use before.
Regards
Hein
P.S. trasnaction spad for printer maintenance, but better to check with oyur colleagues

Similar Messages

Output device is locked by R/3

Dear All,
While trying to take print in spool.I am getting the following error""Output device is locked by R/3"
Thks in advance,
With Rgds,
Babu

Hi,
U might not be having authorisation for SU3 .Kindly contact basis consultant for Su3 rights and then assign the printer.
Regards,
AM

Output device DKRDSP029 is locked in the SAP system - RFC error

Hi,
One user of the system has got the following error when he is loading his "Change Office and communication" iView in the portal. This is the SAP standard DK used iView!
No one else has this error in the system as far as we know and the DKRDSP029 is a printer. I had no idea that a printer was connected to this information but apparently there is.
Does anyone has any input to what the problem actually is?
Thanks :-)...
Start of the stacktrace:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Output device DKRDSP029 is locked in the SAP system , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCGetDetails(FcCodBusinessLogicComp.java:472)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onInit(FcCodBusinessLogicComp.java:228)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onInit(InternalFcCodBusinessLogicComp.java:512)
at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onInit(FcCodBusinessLogicCompInterface.java:115)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.onInit(InternalFcCodBusinessLogicCompInterface.java:147)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.onInit(InternalFcCodBusinessLogicCompInterface.java:227)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)

Please check if this user has any default output device configured in the corresponding backend system. (from SU01)
If the printer/output device configured for this user is DKRDSP029, there might be a problem with the printer setup.
You can try and change the printer to a different one if required.
Thanks,
Shanti

Printer problem "Output Device LP01 is Locked by R/3"

Hi BASIS Experts,
user is printed
Spoolrequest showing Status="-" , outputrequest is not generated,
in SP01 listof spoolrequest
selecting the Spool no(Check box) and Clicking PrintDirectly
it is showing message "Output Device LP01 is Locked by R/3"
I checked Printer Q it is in Ready Stage, there is no changes to the printer from BASIS side.
my Environment is AIX,DB2,R3
I appreciate the Quick & helpful response.
Thanks & Regards,
Kishore Reddy

Hi ,
It will show ... running ... but try to trace ... and check .. .
it will show running ... but you need to check ..
Does it reading writing to database ?
Analyses the job... what exactly it is trying to do ..
.... I never seen the job running this much long time ....
Regards
Ben.

Output device locl is locked by R/3

Hi Gurus,
can anybody tell me how to unlock the printer in SPAD?
Thanks in advance.
Thanks & Regards,
Lata Borannavar

Hi Lata,
Best solution will be resetting the output device by the basis guys.
Normally all the output devices are stored in table-SSFPP and in the field - TDDEST.
So go to Sm12 and see if table is locked then remove lock there itself.
If you are not having authorization to SM12 write program using function ENQUEUE_E_TABLE
call function 'ENQUEUE_E_TABLE'
exporting
tabname = 'SSFPP'
varkey = varkey
exceptions
foreign_lock = 1
system_failure = 2
others = 3
Cheers!!
VEnk@

"No audio output device is installed" on Satellite C655D-5120 running Windows 7 64-bit

Ever since I installed Windows 7 Professional 64-bit on my C655D-5120 laptop, I keep getting the message "no audio output device is installed." I have tried all the suggestions I have been able to find on the internet to install any audio output device to correct this situation but without any success whatsoever. If I go to Control Panel and click on Device Manager, there is no entry for "Sound...." so there is nothing to delete there to start things over again. So, does anyone have some new suggestion that I should try?
Solved!
Go to Solution.

To answer your question, it's a rather long story. I bought the computer used and already out of warranty more than two years ago and sent it to the Philippines with my son to give to a friend there. Because it did not get forwarded, it just sat unplugged for a very long time, likely more than a year. When I suggested that my son plug it in, he informed me that the battery had failed, the keyboard was unreliable, and there might be problems with the hard drive. So when I visited the Philippines in March, I took along a newly purchased battery, a newly purchased keyboard, and a spare hard drive that I already had. In the process of swapping out the keyboard, something slipped and it broke loose the on/off power socket from the motherboard. So I just brought it back to California in April. When I could not repair it myself, I took it back to the man from whom I bought it. He discovered that there was something else seriously wrong with the motherboard and replaced it and the entire lower half of the case, which it turns out was not an exact replacement. The trade unanticipatedly converted my C655D-S5120 to a C655-S5082. When I attempted to boot the computer, it kept asking me for the HDD password, which I had never set or changed and therefore was unknown to me. What caused this to happen I do not know, unless it was because the internal battery completely discharged. Internet research convinced me that this locked HDD was now trash, and I replaced it with a spare WD HDD that had been previously wiped clean, loaded a new installation of Windows 7 64-bit onto it, and started using it again. All research I have done since then and the multiple attempts I have tried indicate that this C655 has no functioning hardware audio device installed and therefore trying to load an audio driver is futile. Not knowing the history of the C655-S5082 replacement definitely complicates things. I have resigned myself to using it without any audio capability. (It is not my only computer.) Because I am severely hearing impaired (I'll be 78 later this year), functional audio is not particularly necessary anyway. So I believe that this case can now be considered closed, even though not to my complete satisfaction.

Help, no sound, no sound output devices

Hi all,
I tried this over in the Tiger section with little help. About a week ago I told my grand-daughter she could plug her iPod headphones into the headphone jack on the the front of the G4. Now, I have no sound at all except for through the headphones and only the headphones show up as an output device. I have tried trashing the "com.apple.soundpref.plist" and rebooting thinking that the OS would creat a new one during startup but that didnt work (there was TWO of them in there). I also tried trashing "com.apple.audio.AudioMIDISetup.plist" but that didnt help either. I put them both back where I found them later. Those files both belong in library-preferences right? I tried zapping the Pram but having no sound I didnt get a "bong" I just listened for it to rev-up twice, still no change. I also tried the PMU reset switch. I can change the volume level with no effect except for the headphones and the sound is not muted.
System Profiler does not recognize apple pro speakers that are plugged in, I do have sound sticks to try but they are boxed up in the garage.
So I am wondering if the phone jack got messed up by the iPod plug, a hardware issue, or does this seem to be software related problem? I did an archive & install today with still no sound so now I am thinking that the plug is messed up inside and still thinks the headphones are plugged in.
Does anyone out there have any advice to offer?
I am going to do surgery next to explore the headphone jack and the tiny speaker above it.

Slimtech,
I don't have a solution for this, but maybe some comments might help a bit...
com.apple.soundpref.plist and com.apple.audio.DeviceSettings.plist should be at /Library/Preferences.
com.apple.audio.AudioMIDISetup.plist should be at ~/Library/Preferences.
The "Audio (Built In)" section under System Profiler for my QS G4 shows no attached devices, but merely shows information about the sound card itself, with three generic outputs listed as "Internal Speaker, External Speaker, and Headphones".
Normally, you should get a startup Chime from your internal speaker even with headphones plugged in, unless perhaps the sound setting is on Mute at shutdown, which sometimes will affect/mute the startup chime at the next startup.
I would think that if the Mac thought that the headphone were still plugged in after removal, your Sound Preference Pane Output window would indicate this. If the Headphones appear in the Output window when plugged in, then disappear when removed (refresh the window by clicking another Tab then going back to the Output Tab), the System obviously recognizes their removal. Apparently, it doesn't recognize the internal speaker that it's supposed to switch back to though, for reasons unknown to me.
You might try vigorously and repeatedly plugging/unplugging the headphone plug into the headphone jack, which helped clean up the jack and restore the sound on my G3 some time back.
Sorry I couldn't be of more help.
Gary

Help! No Audio Output device is installed

My speaker in bottom right for My sound say "No Audio Output Device Is Installed" and i have tried to go through many things to solve such as go into device manager and enable or update through there etc...to no avail.
I stumbled across a thing that worked for most people. Recovery Manager. but. I don't have it on my computer to try so i have no other options to turn to. Can someone please help on how to fix this issue

Dear Customer,
Welcome to the HP Consumer Support Forum!!
To isolate the issue please perform the steps below:
1. Restart the computer.
2. Check the Sound icon in the taskbar.
3. If the icon has an X in the lower corner, click the Sound icon in the taskbar or
4. Right-click the icon, and then click Troubleshoot sound problems.
5. The audio troubleshooter checks for sound problems. When the troubleshooter finishes, it displays the results.
6. If the computer has sound, the issue is resolved.
Install Original Realtek High Definition Audio Driver from the link below:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-Slimline-s5000-Desktop-PC-series/3942804...
From the above link click on Driver-Original > Original Realtek High Definition Audio Driver > Download and install the same.
In case the issue still persists and if the audio was working fine earlier, you may perform system restore to previous working condition using the steps mentioned in the link below:
http://bertk.mvps.org/html/restoresysv.html
Hope this helps, for any further queries reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GR1
Although I am an HP employee, I am speaking for myself and not for HP

HELP ASAP! no audio output device installed with hp pavilion dv2500

product name: hp pavilion dv2000
model number: dv2710us
product number:2CE75228LJ
windows vista home premium 32bit
my hp keeps telling that have no audio output device installed and theres the the image for volume with a large red circle with a white x in it.
this is not true because i have contexant (i think that's what it is called) speakers installed.
Lately when i would restart my computer the sound would work intermittently but for the past two days whether i restart my computer or not the image for volume with a large red circle with a white x in it is still there and says no audio output device installed. PLEASE HELP!
This question was solved.
View Solution.

Hi, you can try the below steps to resolve the issue :
Step 1 : Re-install audio drivers from HP Recovery Manager.
1. Click Start, in the Start search box, type recovery . Then click Recovery Manager .
2. In the Recovery Manager window that displays, click Next. On the Reinstall software programs that came with your computer screen, click No, I would like to see other options . Then click Next .
3. In the Reinstall hardware drivers screen, click Yes . Then click Next. On the Welcome to Hardware Driver Reinstaller screen, click Next .
4. In the driver list, select the name of the sound adapter installed on the system. Then click Next. When complete, the Reinstallation is complete screen displays. Click Finish to restart the computer. After the computer starts, test for sound. If the issue persists perform step 2.
Step 2 : Re-install audio drivers manually
If there is no sound and the error still displays, update the audio driver from the weblink below :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1&cc=us&dlc=en&lc=en&...
Step 3 : Restart the Windows Audio Service.
1. Click Start , type services.msc into the search field, and then select services.msc from the list when it becomes available to open the Programs window.
2. Scroll down to and select Windows Audio , right-click to open the drop-down menu, and then click Start .
3. Right-click Windows Audio , click Properties , and then verify that Startup Type is set to Automatic .
Restart the Notebook and check for the issue.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Help Please!! no audio output device installed?

Hi. I have a satellite A215-S4757 last night I installed some windows updats went to bed because it was going to take awhile. When I got it had finished and was in sleep mode. When I turned it on I noticed the sound was on mute. Or I thought it was. When I attempted to turn the sound on I recieved the message "No audio output device installed". I updated BIOs 2.30 but that didnt work. If anyone could help me out I would greatly appreciate it!
Thanks

Try this! Looks like you have Realtek audio. I was having the same problem until I installed the updated Realtek driver directly from Realtek site.
As many users have posted, I was having this problem with my Satellite L505-S5990. I tried most of the suggestions I could find here and on the 'net to no avail. I was surprised to see that this problem affected many laptop brands - even as far back as Windows XP!!
Last week I think I finally found the answer (or at least Realtek did). My laptop has Realtek HD audio, and the drivers that came with laptop seemed to be the culprit. I checked the Realtek site last week, and they have an updated driver, dated 3/30/2010, for Windows 7 as well as other versions of Windows. It is Version 2.46.
I downloaded and installed these drivers, switched back to going into sleep mode rather than hibernate and - so far - the computer wakes from sleep with sound intact!!!
Hopefully these drivers will work for others.

Audio icon in upper right menu disappears and there is no sound Went to Apple preferences which says there is no output device. I can't figure out what to do. Help!

There is a sound icon in the upper right menu which disappears and reappears. When it disappears there is no sound. Went to Apple preferences for sound preferences. When the sound icon is off, this page is not active. Says "mute" is activated and that there is no output device. Cannot fix this problem. How do I retrieve the sound icon and get sound back?

Hi Ronnie, anything in particular going on when this happens?
Long shot, but...
Next time it happens... Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

How can I get my audio input and output devices back? I have no sound and cannot see any of the devices in Audio MIDI Setup..??

Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
Thanks in advance for any help anyone can give me!

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

Test report to check output devices?

Hi,
Is there a test report that will print a page so I can check if the output device is working OK and printing like it should? I have create a output device with a device type but now I would like to check if it's configured OK. Is there something I can print to check that? So resolution, margins etc.
Thanks!

Hi,
Just go to SM50 and press the printing icon there. Is not a large report but you can see the resolution and margins there.
Hope this helps you.

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Background job step - Printer - Output device table

Hi,
When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ?
Thanks.

Hi Raj check table TBTCP

Output device is locked

Similar Messages

Maybe you are looking for