Output device not changing in Spool

Dear Fellows,
I am having problem in the printing of purchase contracts. Users want to keep the output proposed in contract creation in pending status and keep on using it through ME9K by trial  print out.
Original output is proposed with output medium of printout OK. Now if I change it to output medium fax in ME9K and do a trial fax it does not work. SP01 shows the original printer as output device and not the fax machine.
I am not sure where the problem is. Please help why output device is not changing when the output medium is changed ?
Tkx
IMJ

Dear,
When in NACE tcode, you must be selected Application EV, then select output types button. Then select the output type for Fax->then branch to detail , go to default value tab: then you''ll find transmission medium.You can select "fax" or "external send".
If you're using external send, u need to maintain the "communication strategy"in
IMG-Application serverbasis servicesmessage controlDetermine Comm.Strategy,then name it and maintain the comm,typethen select the comm.method=fax.
Regards,
w1n

Similar Messages

  • Output device not defined error while saving the quotation

    Hi all,
    We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1.  Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is displaying an error as 'Output device not defined'.  If i remove all the output types while changing the quotation in VA22 from header, it is processing.
    I checked with all other output types combination.  The error is trigerred only when we  have ZJT output type along with ZQTO.
    We are not able to recognise the error.  Please help out to solve this issue.  Its very urgent.
    Thanks.

    Hi Remi
    Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
    Thanks a ton.
    Regards
    Prakash Bhave

  • BPM_DATA_COLLECTION fails with (Output device "" not known) error

    Hi all,
    I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system  failing with 'Output device "" not known error.  Since it is collecting data for Solution Manager system why does is it trying to find an output device.
    It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
    Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2.  _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
    Thank you very much for your help!

    I am experiencing this same issue in our ECC 6.0 system.  We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system.  These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
    When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
    Does anyone know if it ok to change the user for this job? Should it be run by DDIC?  I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

  • Output device "" not known

    Hi Expert,
    I try to execute SWU3 for automatic customizing workflow on ECC 6.0.
    I have got error Output device "" not known and no background job is executing in my system .
    This error I am getting for this activities
    Schedule Background Job for Missed Deadlines
    Schedule Background Job for Work Items with Errors
    Schedule Background Job for Condition Evaluation
    Schedule Background Job for Deadline Monitoring
    I search in other topic, it mention that basis guy do something bot not clear how to solve it.
    Please help me.
    Thanks in advance.

    Hi Karri,
    Thanks for the reply.
    Yes I do have authorization for execute SWU3. My user ID have same authorization as sap*.
    WF-Batch User Exist, RFC for workflow localXXX also set.
    From thread : Error activating  SWU3 -   output device "" unknown
    I see this issue solve by basis, they adding some parameters to start and instance profile.
    But I have no idea which parameters.

  • Output device not listed.

    What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed. 

    Very well stated.  And, sometimes I do forget that there is still such a thing as celluloid.  Not to mention all the new "K"s that RED is coming up with (aren't they working on something like 27 or 28k now?)  When I look at it from that point of view, what you say makes perfect sense.
    But then why does preferences>video preview in After Effects give me the "output device" option of IEEE 1394 at NTSC 720x480?  This leads me to believe that I could plug a deck into 1394 and get a video preview.  If this is the case, then my way of thinking says it should offer other options for "output device".
    When I first set up Premiere Pro CS4, the playback settings did not list the HDMI HDTV as an external monitor option.  It wasn't until I fooled around with the system's display settings and turned the HDTV into an extention of the desktop that suddenly Premiere Pro listed it as a possible external monitor.  So, my history there (and my goofy sense of logic that makes perfect sense to me) has me wondering if a similar sequence of messing with the display options is suddenly going to make AE see the HDTV as an "output device".  I am not interested in realtime playback, merely the closest reference possible as to what my video image looks like in HD on an external monitor.  I ask "why do I need a separate video card like my old Matrox card, when standard graphics cards these days can handle HD & even have HDMI out?"
    Admittedly, I know next to nothing about the complexity & inner workings of software and computer components.  Why, I was ready to throw a party just because I successfully installed an additional hard drive in my new computer.  I must be like one of my own clients who don't understand why we can't easily separate a voice track from a music track when it's been rendered as one .mp3 file...or why we can't quickly cut a person out of a video layer and make them seamlessly interact with footage of JFK, Zemekis-style.

  • Output device not detected

    My Mac Air is in mute mode with no output device detected and I cannot move it out of that mode in system prefs.

    I just realized I posted this in the wrong place. I moved it here. http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/monitor-on-secondary-display-output-device-not/2dd93e8b-4d29-42dd-9a6f-189992074ae8?tm=1430617069126

  • Output device not automatically determined in VF02

    Hello gurus,
    My default output device is not coming automatically when I add an output type in VF02. This is an issue because output type has requirement 62 set in output procedure, therefore it will not be added until invoice is release to accounting. Futhermore, we have implemented Argentina eletronic invoice, which won't allow to change the invoice once it has been released to accounting. Quite a contradiction. So I'm hoping the output type will be added by condition technique while releasing to accounting, yet i believe since the output device is not being automatically determined in the background, it won't do.
    Any ideas?
    Thank you very much.
    JP

    Hello guys,
    I had checked all your suggestions before posting this thread, but still the issue remains:
    - VV31 condition records are fine but I cannot set a single output device since it will be used for many output devices.
    - Analysis was carried in VF02 and the condition is being picked up but since requirement 62 is set in the output procedure, which forces the billing document to be first released to accounting, the condition is being removed:
    - Printer is set in the user profile options, but does not come as default in VF02
    Thank you all.
    Kind regards,
    JP

  • Luactivate possible bug - diag-device not changed

    I wasn't sure where to submit this, so I'll post it here.
    When using luactivate, it modifies the eeprom boot-device so you get the new boot environment on the next reboot. However, for machines that support diagnostic booting, the diag-device is not changed.
    This caused a bit of confusion for us; we needed to do a diagnostic reboot on a machine that was upgraded quite some time ago and were quite puzzled why it came up in the solaris 8 boot environment. Seems a bit weird to not modify the diag-device to match the current boot-device?

    I wasn't sure where to submit this, so I'll post it here.
    When using luactivate, it modifies the eeprom boot-device so you get the new boot environment on the next reboot. However, for machines that support diagnostic booting, the diag-device is not changed.
    This caused a bit of confusion for us; we needed to do a diagnostic reboot on a machine that was upgraded quite some time ago and were quite puzzled why it came up in the solaris 8 boot environment. Seems a bit weird to not modify the diag-device to match the current boot-device?

  • Default output device not coming

    I made one PDF form and attached it in List LG01 in CB85 to print process order through COR2 output device is mentioned as LP01 in list Lg01, but while printing, output device is coming as which is mentioned in user profile.
    I want that output device which i mentioned in configuration should come as default during printing through COR2....Pl. help
    Edited by: lisa harley on Feb 26, 2010 11:09 AM

    Hello,
    Please check the below settings at "Printer Specification" for CB85,
    If output device = 1  ,then it will select the output device for user profile
    if output device  = 2 , Output device from configuration, ie CB85
    Regards
    Pradeep

  • Sound "output device" not recognized

    Out of the blue I get no sound on my computer. I tried all sound preferences and it says that "no output device is found." I even tried headphones, but nothing works. The mute button is checked, but I can't uncheck anything. Everything's gray -- can't be accessed/clicked on.
    Help! Thanks.

    Welcome to Discussions - have you tried rebooting Also, take a look at the suggestions [here|http://docs.info.apple.com/article.html?artnum=300832] and see if anything helps. If you hear the start-up chime but no other sound, the problem might be what another poster, First Magus has suggested:
    Your digital out has been turned on. You will also notice a red light in the hole when this happens. Use a plastic toothpick to reach into the hole and around the 3 o'clock position try flipping the switch. An alternate method that has worked for some people is to plug and unplug the earphones a few times. This sometimes resets the switch.
    Please post back with results,

  • JSP output does not change on Weblogic 5.1 / Visual Age 3.5

    I'm making developmen on Weblogic 5.1 and Visual Age 3.5.
              I change a JSP and when I reload it in my browser, I can see that the
              page is actually being recompiled, and if there are errors in the
              page, error messages are being displayed.
              However, if the page compiles without the error, it displays the
              output of the previous version of the page. No matter what I do, the
              page does not reflect the changes. The only solution is restarting
              the server.
              What might be the cause of this problem?
              Thanks,
              Sadik
              

    I'm making developmen on Weblogic 5.1 and Visual Age 3.5.
              I change a JSP and when I reload it in my browser, I can see that the
              page is actually being recompiled, and if there are errors in the
              page, error messages are being displayed.
              However, if the page compiles without the error, it displays the
              output of the previous version of the page. No matter what I do, the
              page does not reflect the changes. The only solution is restarting
              the server.
              What might be the cause of this problem?
              Thanks,
              Sadik
              

  • Problem with audio output device not working

    Okay about a week ago, i came home from work, booted up my laptop and noticed that the hp quicktouch program failed to start. Then I also noticed a red X over my sound icon on my taskbar. So i thought it might have been an error of some sort and rebooted. When I did that everything came back up find, but when I started playing a game, I noticed the sound went out again... I closed the game and went into the device manager. But as soon as I closed the game out the sound fixed itself... So i started the game back up and about 10 mins in it went out again... So I went back into device manager, scanned for hardware changes and it seems to be working find, so i reinstalled the game thinking that could be the problem.
    Well when I rebooted my laptop i got the error again about quicktouch and the red X over my speaker icon. I went back into device manager to find that my sound, game controller device and driver is not even listed...
    Ive been looking around for a fix to this problem, but could not find any solution. So today I reinstalled windows again, but no sound, no driver, or anything is showing up. I really dont know what to do to fix this, people say download drivers and ive tried that, nothing is seeming to work.
    If anyone knows what I can do to fix this please inform me, the only thing else I can think of is go MAC lol.
    Oh btw, im running a HP Pavilion Entertaiment PC (dv9700). It has windows vista 64 bit.
    Thanks in advance.

    use stystem recovery and lose all files, photos, games and all settings - that the best way ....
    use device manager to reinstal sound driver, but try to install diferent versions of it, after update (made by hp update) i had no sound, installing older ver help
    sorry for my poor english
    Hp Pavilion dv6408nr - Vista
    external HDD - ubuntu

  • Using Mountain Lion iOS and audio output will not change from internal speakers to AppleTV so that sound can come from TV speakers, why??

    I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring.     The video does just fine.     However, there is no audio coming from the TV.     After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
    What's going wrong ?????
    AJ

    Are you sure that WIFI network doesn't have an AppleTV on it?  Just because you don't own it doesn't mean there isn't one on that network.  The laptop or better said the OS cannot differentiate between an AppleTV that you own or not.  If it sees one on the network, it will show you one as being available.  The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.

  • ML sound output device not remembered

    My USB D/A converter worked fine from Tiger right up till Lion, now with Mountian Lion everytime I restart the machine I have to reset the Preferences for the USB output. Very tedious. How can Apple fail in such a basic software setting??? Anyone found a workaround? Anyone at Apple care? Is there a fix likely?

    Welcome to Discussions - have you tried rebooting Also, take a look at the suggestions [here|http://docs.info.apple.com/article.html?artnum=300832] and see if anything helps. If you hear the start-up chime but no other sound, the problem might be what another poster, First Magus has suggested:
    Your digital out has been turned on. You will also notice a red light in the hole when this happens. Use a plastic toothpick to reach into the hole and around the 3 o'clock position try flipping the switch. An alternate method that has worked for some people is to plug and unplug the earphones a few times. This sometimes resets the switch.
    Please post back with results,

  • Why is my output cases not changing?

    Hi..
    I am trying Formular function with case structure.. I do not have any error but it is not moving...
    Does anyone have any idea?
    Attachments:
    example.vi ‏17 KB

    You've got a few issues.  In your if statements, you're using dio = 0 and curr = 0.  Those are assignment states which means your setting the variables to those values.  YOu need them to be dio == 0 and curr ==0 to make them comparitive functions.
    You should also be using integers as your inputs, as trying to compare floating point numbers to an exact value is a no-no.
    Finally, you still have syntax issues.  The else statement is only for the final for statement, so your code will only work for cur==3, all other results will be 4 because your final if structure will be false for cur!=3.  You can combine them to be If (dio ==0 && cur == 1)  ... else if, etc.  You would be better off using a case statement since dio is 0 for all your states.
    Is this just an exercise in learning, or is this the way you are trying to implement something?  LabVIEW has much more elegant and more efficient ways to do what you are attempting.

Maybe you are looking for