Output Device Selections Not Available?

Finally have upgraded to a DLT 7000 and now - in DVD Studio Pro 3.0.2 under the General Tab - I am not getting any destination options for outputting.
Any clues? I am using a Atto SCSI card and with Atto have already determined the drive IS being recognized by my computer - just NOT DVD Studio Pro.

Never mind.
Here's the answer if anyone ever needs it.
The out put device selection is under Advanced Formatting.
I was told it would be in the "General" Tab, so I was just looking at the inspector.
Upon opening up Advanced Format - the DLT Drive magically appeared. Just like Lucky Charms.

Similar Messages

  • Internet Connect..why does it say "The selected device is not available"..?

    Hi guys,
    Can you help? I am using BT Broadband in the UK via a wireless router. However, every time my computer wakes up from sleeping an Internet Connection window pops open and says "The selected communications device is not available. Please check your settings" or something to that effect.
    Why does it do this and how can I stop it? My airport works just fine and automatically connects to the broadband.....
    Thanks
    Lindsay

    Lindsay, what is the order of Ports in...
    Network>Show:>Network Port Configurations

  • Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

    i tried it on my tv sony bravia w700b with my new xperia z1 
    i didnt unlocked my bootloder or i didnt rooted my phone
    dont know whats the problem is
    'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

    Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
    If you have unlocked your bootloader this may also be the cause for this issue.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Output device is not type sapwin

    Hello SAP Gurus ,
    i am trying to print the dunning letter and i am getting the error "output device XYZ is not type SAPWIN".
    I did look up in the forum for the appropriate answer but could not find one .
    Has anyone else gone through the same error .
    any suggestions and solutions please
    thanks in advance ,
    Sumit

    This is message TD429 (note: providing the message number (we usually can't know) is useful to search forum and sap notes).
    Is that custom code which prints the dunning letter? Check that it doesn't force the device type.
    This message is also triggered when you try to reprint a spool to an output device whose device type is different from the original device type.
    Otherwise report this error to SAP support.
    For more information, see Note 528802 - xxx output device does not have a yyy device type.

  • Backup job state pending resource availability   Deferred because  a required device is not available

    Hi
    I had OSB 10.4.0.1.0
    my backup job were running successfully for more than 3 months
    last week I started getting : backup job state: pending resource availability
    deferred because a required device is not available
    Job created.
    Dispatching job to run on administrative server.
    Drive or volume on which mount attempted is unusable.
    My obtool -ldev -g is :
    tape01-lib:
        Device type:            library
        Model:                  [none]
        Serial number:          [none]
        In service:             yes
        Debug mode:             no
        Barcode reader:         yes
        Barcodes required:      yes
        Auto clean:             no
        Clean interval:         (not set)
        Clean using emptiest:   no
        Unload required:        yes
        Ejection type:          auto
        Min writable volumes:   0
        UUID:                   252d62dc-d8ec-102b-bceb-001d092aeca1
        Attachment 1:
            Host:               server1
            Raw device:         /dev/sg3
        Connection type:        [unknown]
        Inquiry data:
            Vendor:             IBM
            Product:            3573-TL
            Firmware:           C.30
            Serial number:      00X2U78G7865_LL0
    opening handler: device is busy
    tape01-tape:
        Device type:            tape
        Model:                  [none]
        Serial number:          [none]
        In service:             yes
        Library:                tape01-lib
        DTE:                    1
        Automount:              yes
        Error rate:             [disabled]
        Query frequency:        [undetermined]
        Debug mode:             no
        Blocking factor:        (default)
        Max blocking factor:    (default)
        Current tape:           4
        Use list:               1-20
        Drive usage:            7 months, 3 weeks
        Cleaning required:      yes
        UUID:                   2dfadcfa-d8ec-102b-bceb-001d092aeca1
        Attachment 1:
            Host:               server1
            Raw device:         /dev/sg2
        Connection type:        [unknown]
        Inquiry data:
            Vendor:             IBM
            Product:            ULT3580-TD4
            Firmware:           C7QH
            Serial number:      1310113272
        Hardware compression:   not available
        Hardware encryption:    not available
    please I need help
    Thanks

    What does an lsvol on the library show? What about an lsj -l on the job ? We need to be able to see what tapes are available and what the job is looking for .
    Thanks
    Rich.

  • GX630 can't burn DVDs: "The device is not available."

    Hi there, i've got a problem during burning DVDs in Nero Expres or another burning software. When process starts, in a log it'll show a message: "The device is not available." then it continue til 45%, then software show error mesage with burning error.
    I have notebook msi gx630 running on MS Windows Vista SP1 with the newest upgrade, dvd burner Optiarc DVD RW AD-7560S.
    Please if somebody know the helpful answer write me back   

    Have you tried to write different CD/DVD source? [Better brand etc.]
    Get VSO Inspector http://www.vso-software.fr/products/inspector/inspector.php ,
    execute it and paste the information.{Device Features page} {Show us the image, look here how to attach it to the forum ==> https://forum-en.msi.com/index.php?topic=90789.0
    Also have you done new fresh OS installation?
    Have you tried to write with different applications as well?

  • Hi when i select tab on itunes it comes up 'selection not available in uk' and if i try to sign in it comes up 'check network connection'... any idea's.. cheers

    Hi when i select tab on itunes it comes up 'selection not available in uk' and if i try to sign in it comes up 'check network connection'... any idea's.. cheers

    Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

  • CUA: SCUG - Transfer Users errors with Output Device does not exist

    Greetings,
    I'm currently setting up CUA on our ECC 6.0 boxes and ran into an issue when I run SCUG and try to transfer the users. We're in the process of upgrading to ECC. The target systems are upgraded copies of our current 4.7 target systems.
    Currently we have CUA connecting to our DEV,TEST, PreProd, and Prod Systems.
    The output devices only reside on the target systems. There are no output devices on our production CUA box.
    I'm trying to setup the ECC CUA box and modeling all the settings to our current environment. Once I set the CUA setting, including the RFC's and ALE connections I ran scug and ran into the issue.
    I only get the error where the Default Output Device is populated. Users with no Default Output transferred without any issues. I looked up notes in OSS and can't seem to find any on this subject.
    Side note: If I remove the output device it transfers without error. Obviously this is not a solutions, I was merely testing out the scenario.
    Any help would be greatly appreciated

    Hi Alex,
    there is just a little comment in SAP note #399917 (point 4).
    As from my knowledge, the SCUM settings are not considered during SCUG. So setting
    'output device' to local will not be a solution.
    The standard way is to transport the ouput device information to your CUA-master system before taking over the users. (create transport in  SPAD).
    I have also another workaround for you gurus, but this will need to modify the standard coding for the time of taking over your users. Using this modification, only a warning message will appear and unknown printers will not be taken into CUA-master system.
    Pls test this proposal carefully (coding is rather old....), this is just a suggestion !
    Include LSUUCF01                                                 
    FORM DEFAULTS_CHECK                                              
    Spool: Ausgabegerät                                            
      IF NOT DEFAULTSX-SPLD IS INITIAL AND                           
         NOT USER_DEFAULTS-SPLD IS INITIAL.                          
        SELECT SINGLE * FROM TSP03 WHERE PADEST = USER_DEFAULTS-SPLD.
        IF SY-SUBRC <> 0.                                            
          PAR1 = USER_DEFAULTS-SPLD.                                 
          CALL FUNCTION 'BALW_BAPIRETURN_GET2'                       
               EXPORTING                                             
                    TYPE       = 'W' "'E' "Warning instead of error                                                                               
    CL         = '01'                                
                    NUMBER     =  29                                 
                    PAR1       = PAR1                                
              IMPORTING                                              
                   RETURN = ERRORTABLE                               
               EXCEPTIONS                                            
                    OTHERS     = 1.                                                                               
    APPEND ERRORTABLE.                                         
        ENDIF.                                                       
      ENDIF.                                                         
    I strongly recommend to undo this modification after you have finished SCUG.
    Good luck, b.rgds, Bernhard

  • Output devices list  not appearing completely in the drop down list

    Hi,
    I have a query where I am not able to see all the 583 output devices in the drop down list of output device for a transaction code whereas I can see all the output devices in SPAD. Can anyone tell me the reason for this?
    Thanks.
    Brijesh

    Dear Brijesh,
    You can show all the value, click on the restriction button, then change the max numbers of hits to 10000,then you can list all the data in drop down, as per i know in standard it will only give you 500.
    Regards

  • I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match.  How do I correct this?

    I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match.  How do I fix this?

    I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.          

  • "Print Selection" not available?

    Am I missing something? Can you print just a "text selection" in Safari instead of a whole web page. This seems possible with other browsers, but not Safari?
    Any insight would be appreciated.

    ssc lab,
    "Print Selection" is currently not available as a direct command in Safari.
    There is however a kludge solution available.
    Click on Safari>Services>TextEdit>New Window Containing Selection
    You can then print/save the selection in TextEdit. If you have another word processing program in the Services menu, it can be used in lieu of TextEdit.
    ;~)

  • V4.5 device software NOT available for 8830 verizon??? WHY

    Can someone help me understand why the v4.5 Device software is not available for the 8830 world phone? This one of Blackberry's top phone and they're not going to make this available for their customers!!!!  That ridiculous!  Is there a work around???
    HELP

    I have explained why here :
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=6807&jump=true
    meaning : Verizon US is lagging behind the others including Latin American and Middle East carriers.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Device Drivers Not Available in Windows 7 Professional (Student's free operating system)

    I've Windows 7 Professional (Student Version from DreamSpark) and am having problem with installation of Drivers for Bluetooth USB Device, It worked before matching / pairing "Samsung DUOS". Can you help me over there?
    All it says like this
    Other Device
    Bluetooth Peripheral Device
    Bluetooth Peripheral Device
    Bluetooth Peripheral Device
    I Was unable to attach image! Sorry for that

    At Last I Found Solution:
    It was so nice of you all to post your suggestions! But one thing you forgot me to ask is, "Are you using a China's Manufactured USB Bluetooth Device?"
    Yes! I'm using a china's manufactured device which is available here for $.070 (Rs. 70) in Pakistan. This for no doubt, comes without a disc of drivers.
    Error was only found with "Samsung GTS DUOS" so, I sold that out and bought NOKIA which is working excellent with that adapter.
    To some extent, one this is confusing me! The device was working fine / works fine till now without any other error in Windows XP SP3 (Pirated) (Oops I'm using Student Pack by Microsoft Corporation).
    Regards,
    Muhammad Kashif Sajjad
    Lahore, Pakistan, +92
    Khan.G

  • 2G selection not available iOS 8.1

    After updating to iOS 8.1 on an iPhone 5s I noticed I still cannot select 2G network for data, even though this is supposedly a feature added in iOS 8.1
    I checked the availability of the iOS features by country at http://www.apple.com/ios/feature-availability/ but found nothing related to network selection there.
    Does anyone have this option available and if so, in which country? Does anyone have the same problem?
    Thanks

    The availability of these toggles has to do with your carrier settings. The carrier file contacts this information and it is possible you need to perform a carrier update on your device. The carrier determines most of this information, and the carrier has to be an Apple supported carrier. To update carrier settings, see this support document. iOS: Updating your carrier settings - Apple Support  To understand a little more about carrier settings on LTE capable phones, like your iPhone 6 plus, see this support document. Understanding LTE options on your iPhone - Apple Support

  • J1injv multiple selection not available

    While doing J1INJV transactions it is not allowing the select more than one line item.  Is there any solutions for this.
    N Ram Mohan

    Hi Ram,
    Please note that the Multiple Line selection is only confined to
    "amount correction" and NOT for "tax code correction"
    If you choose amount correction,you can select multiple line items
    by applying the note 1039027.
    This means that if you are going for tax code correction,you can
    select only one line at a time.
    Hope this clarifies the issue.
    Regards,
    Abhisek

Maybe you are looking for

  • Fix Actions panel

    Let users drag an action step to the end of the list. Let users select "Close" for "Insert Menu Item...". Don't expand actions when played. Allow Save in Button Mode Sometimes I feel like I'm telling a child how to pour cereal.

  • Deleting an empty event

    In inadvertently created a new event (it is empty of any pictures) and want to delete it, but I cannot seem to do so. I did a search here, but the recommendation to drag it to the trash or hit the delete button did not work. Is there a way to delete

  • Adobe Audition Won't Launch

    I just loaded all of the available Adobe CC products to my Mac Pro , (2.8 GHz Quad Core Intel 8 Gigs of Ram), using Mountain Lion. Except for Audition, all of the programs work fine except for a hang up from time to time. (the tool in either Photosho

  • Server does not except normal e-mail adresses

    Hello, i have a problem by sending emails. Sometimes my ipad air doesn´t accept email adresses and gives the following comment: "...the server doesn´t accept the email adress  ".........@.....". Who can hlp me? thank you and merry christmas Uli

  • Is it possible to copy paste from one GarageBand project to another?

    I would like to move some of the audio tracks I recorded in another project to my current project in which I have some other recorded stuff.