Output doesn't fill 720x480 player screen

I am running CS4 and when I output to H264 with an output frame size of 720x480 in Encoder, the resulting file will be squished and played back at 640x480. The properties of the player show it is playing 720x480 and the video plays with black bars on either side. I never used to have this problem with earlier versions of Premier Pro. All of the settings (at least that I know of) in Premier Pro are set for 720x480. I used square pixels. Nothing seems to make much difference (although the square pixels made a little).
Playing back in Premier it looks great with it at 720x480. fills the playback window and no black bars on the sides. Its when it goes through Encoder that wierd things happen. I think I have tried about every variation of settings in encoder with not luck.
Any suggestions?

Start reading on PAR, pixel aspect ratio. 640 x 480 square pixels is equal to 720 x 480 with a PAR of 0.91.

Similar Messages

The picture from my AppleTv on my Samsung LCD TV doesn't fill the entire screen. It is only a strip across the screen

The picture on the screen when viewing movies on Apple TV on a samsung lcd screen is only a strip across the screen and doesn't fill the entire screen. Any settings suggestions?

If you can get to the settings on the AppleTV attempt to adjust the resolution settings to something more appropriate.
This may help
https://www.apple.com/support/appletv/essentials/

HT201335 Hi. I have an apple tv and am able to mirror the image on my ipad to my tv, however it doesn't fill the full screen. Is there a way to get a full image on my 32" Tv. Thanks a lot for your help

HI.I have an apple TV and am able to mirror the image on my ipad onto the screen. However, it doesn't fill the full 32" screen. Is there some way to project a bigger image onto the Tv. Thanks for your help

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

Web form doesn't fill the whole screen

I have forms (version 6i) running on the intranet. When I run these as client/server the forms fill the whole of the physical screen; but when in the brower, the forms leave a 2 inch border on the right hand side. I want the forms to occupy the whole of the browser window, but cannot seem to be able to do this. I've tried maximizing the MDI and the form windows etc etc, but still no luck. Anyone have any advice?
Many thanks in advance.
Harry
null

Hi,
When displaying forms in web,
the size of the form that is shown in browser is based on the height and width that you specified in you html file.
The html file in this case means the one that holds your forms java applets.
eg. width=800 height=600
View source the html file when you run the forms in web.(right click to view source from the 2 inches area) and check what's your height and width.
Hope this helps.

Want to increase email screen on my iPad as it has doesn't fill the whole screen and has a border. What should I do?

I want to increase my email screen to its full size again. What should I do?

TTry zooming out on it. Normally you pinch in to minimize, pinch and open your fingers zooms out, should make it full screen.

Resolution doesn't fill screen

My new i5 mac mini says it's using my monitors full resolution 1920x1080 but it doesn't fill the screen.
Using thunderbolt to VGA adapter.
1600x1200 fills screen but is ugly.
Any help would be appreciated.

The native resolution my display is 1080p Full HD 1920X1080 60Hz I use it with the macbook unibody and the mini displayport / VGA Adapter I didn´t test it with the new mac mini

Display doesn't fill screen (Black square around)

Hi, thanks for reading.
Y restarted my computer and noted that there is a black space between the border of the display and the screen. Is the same problem in this post: http://discussions.apple.com/message.jspa?messageID=7175451
I already try to restart the PRAM and the NVRAM, change the resolution and disable the universal access.
Even when i boot the gray screen (with the apple) doesn't fill the screen.
Can anyone help me please?

Try the following; in /Library/Preferences find the file com.apple.windowserver.plist and throw it in the trash. Find also in /Users/yourusername/Library/Preferences/ByHost the file com.apple.windowserver.xxxxxxxx.plist where xxxxxxx is a string of letters and numbers and yourusername is the name on the main user account and throw that in the trash, too. Then restart and see if the wide screen function returns.

White boot screen doesn't fill screen

I'm not sure when this started happening, and it's not too big a deal, but now, when my unibody 17" MBP boots, the white boot screen looks like a 4:3, low-res image with black bands on the sides. Basically, it doesn't fill the screen like it used to.
I have plugged it into a projector using the Mini Display Port to VGA adapter. Might that have something to do with it? Is there any way to fix it?

Try resetting the computer's PRAM, by rebooting and holdiing down the options-command-P-R keys all at once. Let the computer reset and chime a couple of times, and then release the keys and allow it to boot normally.

Doesn't Fill Up Screen - Help

I just got my first Apple Computer (IMac) and am surprised to find out that the Text on the internet does not fill up the screen. I have asked the help desk how to make it bigger and they suggested command +. Unfortunately, that makes the words bigger, but still does not fill the page and the letters start to overlap. Does anyone know how to set the preferences so the internet page fills the screen.
Shelly Girl,
PS I have stretched the screen and that just extends the blue background...not what I want to do.

Hi Shelly
Welcome to Apple Discussions and Mac Computing
Are you referring to the size of the browser window or the size of the text?
Text is increased by going to the Safari Menu (to the right of the Apple icon at the top left of your monitor) and selecting Preferences. In the Appearance panel>Standard font, click on the "select" button. In the Font panel that opens, select a number larger than the existing setting under the size column, then close the panel.
If you are looking to expand the size of the window, click/hold the bottom right corner (where you see diagonal lines) and extend it to the desired size. Then, click on the red button to close the window. Next, File Menu>New Window. The new window ought to be the same size as the one you resized.
Post back

Satellite 4030 CDT display doesn't fill screen

I have a 4030CDT running Windows ME. The display doesn't fill the sceen . I have updated from Toshiba website to give the latest display driver but display settings cannot be changed from 16bit colour & 640x480.
Any ideas what I've done wrong?

Thanks . I've found one on driverguide.com.Just going to download it now .Hopefully all will be solved. I'll let you know. I intend to use the old 4030 when I'm working away from home..not very often.Hopefully I'll succeed & won't have to invest in a new laptop.

My slideshows don't fill my tv screen any longer

I have PSE 9 and PRE9 and have made several slideshows in the past. I create and edit the slideshows in elements and burn them thru premiere. They all have played in my DVD player with no problems and have all filled the entire television screen. However the last slideshow I did still played in my DVD player but it doesn't fill the entire television screen, it has a black frame around the entire photo. I don't think I changed any settings from the others, but even when I create a new slideshow using the same photos I've used in other slideshows it no longer fills the screen. It isn't in my television because it does the same thing in other televisions I've shown them on. All I want is my slideshows to fill the entire television screen instead of being framed in black. I only use SONY DVDs. I've tried changing checking and unchecking boxes for different things but nothing seems to help. Any suggestions would be appreciated.

You should find better advice on aspect ratio over on the video forum. Most of us here are photographers.
http://forums.adobe.com/community/premiere_elements

DV, DVCpro footage doesn't fill canvas

Why doesn't DVCAM or DVCPro50 footage fill the canvas screen exactly at 100% ? There always seems to be a couple of pixels of black revealed on the sides.
This doesn't matter on NTSC screens, but more and more people are watching DVDs now on computer media players and other progressive viewing sources that show every single pixel.
If you take any DV format and play it in the quicktime player there's always extra rattiness, black, etc. around the edges. Is this inherent of the DV/ DVCPRO format? Do you always have to resize your footage to 104% or something in FCP to get rid of this? Does resizing your video to another size other than 100% degrade your look ?

kinda the nature of video. you get the same thing when displaying underscan on a monitor. you could try putting a single pixel crop around the edges.

HT204291 When I airplay my ipad, it doesn't fit the tv screen

I have ipad air and using toshiba tv. When I mirror the image to the tv screen, it doesn't "fit to screen". Are other people having this problem?

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

Creating support message field reported by doesn't fill

Hi colleagues,
When I create a support message field reported by doesn't fill automatically.
I think that I've completed all required steps in order these fields were filled automatically. Fields sold-to party and support team are filled automatically, they work ok.
The steps that I've checked:
- The support message is created successfully from satellite message(SID=DES_01). The user which creates this message is zprueba5 exists with profiles: SAP_ALL, SAP_NEW at the satellite system.
-In the solution manager system(SID=SMG), transaction ib52 for the satellite system is filled with partners: employee responsible, sold-to party and system administrator.
- In the solution manager system(SID=SMG), zprueba5 exists with profiles: SAP_ALL, SAP_NEW.
- Transaction bp, zprueba5 user contains BP roles: Business Partner, Employee, Bill-To Party, Financial Services and at the tab "Identification":
External BP Number: SMG 010 ZPRUEBA5
ID Type     Description                         Identification number
CRM001    External System Identifier   DES_01 0020281686 100 ZPRUEBA5
CRM001    External System Identifier   SMG 0020276689 010 ZPRUEBA5
So, In the solution manager system(SID=SMG), crm_dno_monitor transaction when I open the support message just created from satellite system, I have an error because reported by field isn't filled.
Please could you help me?
Thanks and Regards
Raul Aguilar

Hi Nikhil,
At this message I'm going to reply your last two replies.
1.- You typed me "In ib52 select both the system simultaneously and then go to->parner and assign proper bp no for the respective partner function. You need to do it for every system may be users are same.
I hope you have maintained proper access sequence i.e. via ibase."
For each SAP System that I've defined at SAP Solution Manager, at ib52 transaction I've defined the three roles that IMG activity documentation types:
        Assign business partners with the following functions to the new iBase component systems:
            Administrator
            Key User
            Sold-to Party
SAP Solution Manager Implementation Guide->SAP Solution Manager(SP 17)->Configuration->Basic Settings->Standard Configuration of Basic Settings->Solution Manager->iBase->Assign Business Partners to iBase Components ->transaction Change iBase (IB52), enter in field Installed Base '1' and I select the SAP System->Goto -> Partner
      Function                                        Partner
    00000014 Employee Responsible     298
    00000001 Sold-To Party                  295
    SLFN0001 System Administrator      295
2.- You typed me "Select you partner determination procedure and double click on "User interface setting" here select appropriate partner functions and assign all of them in ibase as I said in above reply.
You must not be getting reported by partner function. Take out System administrator. Motivate by assigning points."
My Partner Determ. Proc. is SLFN0001, so I double click on User interface setting like you explained me, adn now appears:
Header Screen:
Sequence and Functions for (main) Partner Displayed
Partner Function1 00000001 Sold-To Party (CRM)
Partner Function2 SLFN0002 Reported by (CRM)
Partner Function3 SLFN0003 Support Team (CRM)
Partner Function4 SLFN0004 Message Processor (CRM)
But now I don't understand if at ib52 transaction I've to add any role or if from "User interface setting" I've to delete any Partner Function. Could you detail me when you type "You must not be getting reported by partner function. Take out System administrator", please?
Regards,
Raul .

Changing resolution and image size doesn't change result on screen?

I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

gradded,
The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
Hope this helps.

Output doesn't fill 720x480 player screen

Similar Messages

Maybe you are looking for