Output error:the name of the package "greet" does not reflect the location of this file...
output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?
The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)
Similar Messages
-
See question above
Do you have Facebook contacts turned on? It may be at some time you got an email message from them and that is the way they have their return address set. All previously used addresses are in a cache on the phone and the only way to clear that is to restore the phone as a new device, which deletes all data from the phone. You cannot restore from a backup because the information is in that and will just be put back on the phone.
-
The name of the security certificate is invalid or does not match the name of the site error?
I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
When users open Outlook off the network, and occasionally on the network, they get the error
The name of the security certificate is invalid or does not match the name of the site error
The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
I tried to add AutoDiscoverExternalUri using
http://support.microsoft.com/?kbid=940726 &
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml
I get an error that says
"a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
Thank in advance for your support.
TD
TDHi Tapera,
Thanks for the question.
SRV record is a good idea. You can set the SRV to
https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
url can be resolved from External clients.
In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
1. Access autodiscover via SCP in AD.
https://web.abc.com/autodiscover/autodiscover.xml
2. If SCP access fails, it will try:
https://abc.com/autodiscover/autodiscover.xml
3. Then
https://autodiscover.abc.com/autodiscover/autodiscover.xml
4. Local XML file
5. SRV record
As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
I have a workaround solution. You can do a local policy to disable the autodiscover to access the
https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
1.
On the Outlook client machine, open regedit and add the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
"ExcludeHttpsAutodiscoverDomain"
"ExcludeHttpsRootDomain"
2.
Then set the value to “1” on the above two keys.
Thanks,
Simon -
The name on the security certificate is invalid or does not match the name of the site
Hi Guys,
Every time when we login to SAP Business One, we are getting two identical security Alerts, that we needs to click "Yes" twice.
Text of error: “The name on the security certificate is invalid or does not match the name of the site”
We tried to install certificate, but it is not solved this certificate issue and the alert still pops up on login.
I guess, something wrong with dashboard settings, but don't really know what exact and how to fix it.
Thanks,
SergeyHi,
Please check SAP note:
1810486 - Dashboard Certificate Sercurity Alert appears on every
logon to Business One
Thanks & Regards,
Nagarajan -
I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of. I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
clients get prompted for a security warning. I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine. My Outlook 2013 client doesn't prompt me with the message but I have other users who are
still getting the "The name of the security certificate is invalid or does not match the name of the site" error. The domain on the cert error show up as server.mydomain.local. I've gone through all the virtual directories and pointed
all of my internal and external URL's to https://mail.mydomain.com. This made one of the two warnings go away but not the second. I've dug around on google and gone through everything I could find here and as far as I can tell my internal
and external url's are configured properly and I can't figure out where this error is originating from. Any ideas on where I should look outside of the virtual directories?
I'm including a good link I found that contains all of the virtual directories I updated. I've checked them through both CLI and GUI and everything looks good.
http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/Hi,
When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
Regards,
Winnie Liang
TechNet Community Support -
Dear Gurus,
When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
My downloads ;
1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
2 - SAPKITAB9K==> CSR0120031469_0081131.PAT (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
3 - SAPKITAB9L==> CSR0120031469_0076956.PAT (ST-A/PI , 01Q_731 , Package Level=0002)
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
What could be problem ?
Here is system components ;
SAP_BASIS
740
0005
SAPKB74005
SAP Basis Component
SAP_ABA
740
0005
SAPKA74005
Cross-Application Component
SAP_GWFND
740
0005
SAPK-74005INSAPGWFND
SAP Gateway Foundation 7.40
SAP_UI
740
0006
SAPK-74006INSAPUI
User Interface Technology 7.40
PI_BASIS
740
0005
SAPK-74005INPIBASIS
Basis Plug-In
ST-PI
2008_1_710
0007
SAPKITLRE7
SAP Solution Tools Plug-In
BI_CONT
757
0001
SAPK-75701INBICONT
Business Intelligence Content
BI_CONT_XT
757
0001
SAPK-75701INBICONTXT
Business Intelligence Content for Bobj I
SAP_BW
740
0005
SAPKW74005
SAP Business Warehouse
CPMBPC
801
0005
SAPK-80105INCPMBPC
CPM Business Planning and Consolidation
POASBC
100_731
0005
SAPK-10205INPOASBC
POA Shared Business Componentsin 000 client but now i am getting DUMP ;
Category ABAP Programming Error
Runtime Errors CALLBACK_REJECTED_BY_WHITELIST
ABAP Program SAPLSTPA
Application Component BC-CTS
What happened?
An RFC callback has been prevented due to no corresponding whitelist
entry being configured. The original RFC called function module "RFC_TP" in
the target system with destination "CALLTP_WindowsNT". The callback called
function
module "TRINT_PROGRESS_INDICATOR" in its own system.
Error analysis
Function module "RFC_TP" was called. This execute an RFC callback via ABAP
statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
. This action resulted in this ABAP short dump.
This action was triggered explicitly by the application in transaction
"SAINT " and in ABAP main program "SAPLSAINT_UI". -
Due to our company changing names, we recently moved to a new domain. All users were at first getting a certificate error when opening Outlook "the name on the security certificate is invalid or does not match the name of the site." After our network
admin made some changes, nobody receives this error anymore except one user. The URL at the top of the security alert is the old domain, mail.olddomain.com. I checked the users Exchange Proxy Settings in Outlook, everything is showing the URL's of the new
domain so I'm not sure where this is coming from. I'm assuming it has to be something on her local machine since she is the only one who still gets the error.
Thanks in advance for any help.
Exchange server 2008
Outlook 2010Hi,
Please follow all above suggestions to confirm whether the issue happens in OWA. And run Test E-mail AutoConfiguration in Outlook to check whether there is any URL settings using the old domain.
If the issue doesn’t happen in OWA and your URL configurations are all same as others and set correctly, please create a new Outlook profile to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support -
OCS package SAPKITAC4E does not match the current software component vector
Hello Experts,
I am running EHP4 upgrade on ECC system, I have downloaded files from MOPZ, I got an error message in PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION, error is as follows,
Last error code set: Unable to generate addon queue. Return Code = 1, Reason = "OCS package SAPKITAC4E does not match the current software component vector", check log file 'SPDA_EHP_INCLUSION.LOG' for details
As per the log 'SPDA_EHP_INCLUSION.LOG' it is looking for BBP CRM patches, error message is as follows,
3 ETN490 Use the Add-On installation package "SAPKITAC4E" (type &4"AOI") for Add-On &2"ST-A/PI" rel.&3"01M_CRM570"
3 ETN245 The following import prerequisites of OCS Package "SAPKITAC4E" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN491 Required software component "BBPCRM" rel."500" is not installed
3 ETN264 In the (alternatively) Requirement set "02":
3WETN491 Required software component "BBPCRM" rel."510" is not installed
3 ETN264 In the (alternatively) Requirement set "03":
3WETN491 Required software component "BBPCRM" rel."520" is not installed
3 ETN264 In the (alternatively) Requirement set "04":
3WETN491 Required software component "BBPCRM" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "05":
3WETN491 Required software component "BBPCRM" rel."700" is not installed
3 ETN264 In the (alternatively) Requirement set "06":
3WETN491 Required software component "BBPCRM" rel."701" is not installed
2WETN543 OCS package "SAPKITAC4E" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "02.08.2011"
1 ETN255 End time: "23:30:08"
1 ETN214 ."**************************************************"
BBP CRM is not installed in our ECC system, I am not sure why it is required.
Can you please advise me how to move forward without installing BBPCRM.
Regards,
FazilIf someone one found the following errors during SAP ECC6-EHP6 implementation with Software Update Manager:
1:
Error message set: 'Unable to generate addon queue. Return Code = 1, Reason = "Extended attribute STACK_XML_REQUIRED for SAPK-100AHINUI2FND is unknown"
Solution:
Please update the SPAM/SAINT version with latest available at OSS site, then restart the implementation with INIT option.
2:
Error message set: 'RFC error system DEV nr 00 function 'SPDA_READ_NEW_PACKAGES' failed with code 3 key CALL_FUNCTION_NOT_FOUND: Function module "OCS_CHECK_PATH_CONSISTENCY" not found.
Restart the Software Update Manager and SAP instance. If possible then update SAP Kernel with latest available patch, R3trans and tp as well.
Regards. -
OCS package SAPKITL437 does not match the current software component vector
I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
Lalit KumarI have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
Lalit Kumar -
Scenario - Two Domains in different forests in production
Domain ABC.com - Contains Exchange Server 2010 + Windows 2008 R2 AD Domain controllers
Domain XYZ.com - Windows 2008 R2 Domain controllers + Contains all users + Desktop compuer accounts.
User logs in to the domain XYZ.com from a desktop and he configures outlook using the user ID in domain ABC.com.
When he opens Outlook it is getting connected and he gets an error message pop -up saying 'The name on the security
certificate is invalid or does not match the name of the site'
I am using an external certificate from Thawte for autodiscover.ABC.com & webmail.ABC.com
I read about one solution provided in MS KB article - http://support.microsoft.com/kb/2772058
But in my scenarion there are two domain involved. Pls guide how to clear this.
Hi,
How about logon [email protected] on ABC domain via OWA?
If OWA works well, it seems and issue on the Autodiscover side.
Please run "Test E-mail AutoConfiguration" on Outlook to check whether this issue caused by Certificate Mismatch.
1.
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
2.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”.
3.
In this scenario, you need to check the host name for the following services:
Autodiscover, EWS, OAB, ECP, UM
4.
If any of the urls above does not match the one in the certificate, refer to the following article to change it via EMS:
http://support.microsoft.com/kb/940726
More details to see following FAQ on "Checklist for Exchange Certificate issues":
http://social.technet.microsoft.com/Forums/en-US/fa78799b-5c55-4c71-973b-0e186612ff6f/checklist-for-exchange-certificate-issues?forum=exchangesvrgeneral
Thanks
Mavis Huang
TechNet Community Support -
Upgrade to EHP4: OCS package SAPKE60002 does not match the current software
Hi!
I would like upgrade my SAP ERP 6.0 system to EhP4.
During the phase PRE_EXTENSION/EHP_INCLUSION I get the following error:
ERROR: Unable to generate package queue.
Return Code = 3, Reason = "OCS package SAPKE60002 does not match the current software component vector"
Check log file 'SPDA_EHP_INCLUSION.LOG' for details.
I looked into the defined stack queue by the EHP Installer tool and detected that this SAP HR component should have the version 38. Currenty the SAP HR has the version 01.
Can some one help to solve this problem?
Thank you very much
regards
Jürgenhii
Note 822379 might help you
have a look
Rohit -
The name on the security certificate is invalid or does not match the name of the site exchange 2010
We did an update to SP1 to SP3 for Exchange 2010 over the weekend and now I am seeing the following errors.
"The name on the security certificate is invalid or does not match the name of the site"
Any ideas why an update would effect this. I have looked at the names and everything seems to match up.Hi,
Does the issue happen to all users? If it is, please run the following command to check your certificate configuration:
Get-ExchangeCertificate | fl
Generally, the certificate mismatch issue is caused by the name in URLs doesn't match the certificate names with IIS service. Please make sure all URLs that used to connect Exchange from internal and external should match the certificate names with proper
services.
http://support.microsoft.com/kb/940726
Best Regards,
Winnie Liang
TechNet Community Support -
Hey guys,
We have setup autodiscover redirection properly (I guessed) by:
Creating a CNAME from
AliasName: autodiscover.tenant-domain.com TO
PrimaryName: autodiscoverredirection.hostname.com.
Then doing a re-direction to https autodiscover service.
All seems to be working properly, however, when I open Outlook, it still shows the pop out saying "autodiscover.tenant-domain.com - The name of the security certificate is invalid or does not match the name of the site".
The autodiscover redirection is indeed working properly, that's why the autodiscover is working, however it is still trying to match autodiscover.tenant-domain.com to the certitifcate instead of matching the re-directed url, which is autodiscover.hostname.com.
Could anyone advise what is wrong? Or anyone who knows how to correct it can contact me? :)
Jackson Yap APC Hosting http://www.apc.sg/Hi Jason, Well, if it is doing that, it is most likely beccause your autodiscoverredirection.hostname.com also respond to port 443/SSL. So, what you need to do is to make sure that specific IP isn't responding to 443. The reason is this, 1. You first hit
https://autodiscover.tenant-domain.com, which this is a CNAME to autodiscoverredirection.hostname.com. So, if autodiscoverredirection.hostname.com respond to 443, it will then give you an error. If it doesn, it will then move on to perform redirection right
away and you will not get that prompt.Regards, Kip Ng - http://blogs.technet.com/b/provtest/ -
The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?
Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/
Maybe you are looking for
-
MCEKPO-MENGE issue through 2LIS_02_ITM for Statistical Purchase Order Items
Hello Everyone, I have come across this strange scenario where a given Purchase Order Item in the Source system - SAP R/3 has been changed in the following sequence, 1. First the PO Item was marked as a Deleted PO - LOEKZ = L which set the STAPO = X
-
[Partially Solved] ad-hoc network and wicd
I am trying to connect my laptop to the internet through an ad-hoc network with wicd. It dies at obtaining an IP address. Is there a package that I am missing or something? Any pointers would be great. Last edited by zmbmartin (2010-08-01 21:33:30)
-
Getting ServletRequest in a JSP page?
Sorry about the newbie question, but how do you access the ServletRequest object in a JSP page? Specifically, the getParameter() functions? In servlets it's easy, the objects are passed in the doget() and dopost() functions, but I have no clue how to
-
Is there a way to find out "dbm_user " in MAX DB?
Hi, Can someone tell me how to find the "dbm_user" name in MAX DB. I could find an option called 'user_getall' using 'dbmcli' but not sure how to use it. Please let me know the syntax to use it. Thanks.
-
HP Pavilion dv6 speaker light stays red, unable to hear sound
I have a HP Pavilion Dv6 Notebook PC Product # QE071UA#ABA. The light on the speaker button (F11) stays red when I tap on it, but I can see the sound bar and icon in the center of the screeen. I am unable to use the mouse to adjust sound. When I h