Output errors, Transmit discards and big buffer errors on 1121 AP

I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)
We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors
The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?
What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors         0              47749
Small Buffer Misses
4 misses
139 misses
Medium Buffer Misses
117 misses
249 misses
Big Buffer Misses
62 misses
8982 misses
Dot11Radio0 is up, line protocol is up
MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/479/0 (size/max/drops/flushes); Total output drops: 245980
Queueing strategy: fifo
Output queue: 0/30 (size/max)
5 minute input rate 48000 bits/sec, 25 packets/sec
5 minute output rate 34000 bits/sec, 22 packets/sec
     32482389 packets input, 2056095954 bytes, 0 no buffer
     Received 1622227 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     44289160 packets output, 1268314927 bytes, 0 underruns
     47752 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
Thanks

This is normal.
Remember that wireless network is like a hub: One talks and everyone stops to listen and waits for their turn.

Similar Messages

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

AP1242 Excessive Transmit Discards and performance complaints

I have an AP1242 near a couple of conference rooms. I get complaints when we have a large contingent in there
and some try to download documents. The bandwidth consumption is meage - less than 2Mbps. But there
could be say 50 people in those training rooms. I see no errors at the FE interface on the AP but I do see
a good number of Transmit Discards. A few questions from this..
Are 50 users connected to an AP1242 simply more than should be expected of the device? 802.11g is the radio.
Are transmit discards indicative of some kind of configuration problem? The users in these cases are
generally very close to the access point - within a few feet even.
If it is indicative of a configuration problem would that be an issue of the configuration of the laptop wifi
cards or a problem at the AP?
Thank you for any insight.
Michael

I have an AP1242 near a couple of conference rooms.
You have a SINGLE unit serving two conference rooms. How big are the conference rooms and what signals do the AP detect the clients? What kind of antennas you using? What radios are enabled? What data rates are enabled?
I get complaints when we have a large contingent in there and some try to download documents.Are 50 users connected to an AP1242 simply more than should be expected of the device? 802.11g is the radio.
50 users??? That's too much clients for a single AP. You need to understand that wireless behaves like a hub: One talks, everyone else stops to wait for their turn. And this is on a 100 Mbps ethernet.
Are transmit discards indicative of some kind of configuration problem? The users in these cases are generally very close to the access point - within a few feet even.
Discards mostly mean signal issues. Possibly interferrence. Bluetooth, microwave ovens, old DECT phones, wireless from nearby blasting at the same channels can potentially cause slow responses and discards.
I've got some solutions for you:
1. Add one or two APs;
2. Disable 802.11 b/g data rates from 12 Mbps and below. Make 18 Mbps mandatory and above 18 Mbps as Supported.
3. Use 802.11 a (less channel interferrence).
4. DO NOT be tempted to use high-gain antenna. You're inviting more trouble than solution.

Windows vista recovery error CTOERROR.flg and following that error 0x643 while installing update

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows dialog box - windows security update is not installed successfully . I need to install all updates in one go like last time from my understanding.:
1. So if i install windows update (to try my luck as last time) it shows 0x643 error for .net framework and asks to restart and after that when i try to manually install failed updated 0x643 it asks me to restart the windows for pending updates.
2. Alternatively, If i try to install failed update first just after recovery failure it won't allow me to install important updates for vista sp1 and asks to restart windows.
All i need is to successfully update all updates through windows automatic update which is not happening at the moment.
Not even able to upgrade to sp2 bcz it too restarts for installing.
Please Help.
Thanks in advance.

Hi Mario-L,
I manually downlaod the update KB3035034 and tried to install in my preview build 9926, it shows The update is not applicable to your computer". Actually, what shows in my system when I check for updates, it detects update Kb 3037975
and 3037975 redirects you to 3021953 see description in this link
http://support.microsoft.com/kb/3021953
After installing the updates, and view update history, it shows:
Personally, I have no idea on this issue currently, please submit a report via Windows Feedback App
Yolanda Zhu
TechNet Community Support

Sharepoint web application was unable and show error 403 forbidden and 503 server errors

Hi
i some times loose connection to sharepoint site where i am working with,i was just run some powershell scripts to update
a filed value in a document library only
and it some times show in browser 403 Forbidden error and some times 503 server error
when i check in event viewer i got this below errors
adil

That particular 'error' is OK. It just means that a non-Farm Admin service account doesn't have the rights to run that sproc. Normal with best practice security in mind.
You may want to check the IIS logs to see what the
subcode for the 403/503 errors are.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

TechComm2: 9004 error for FM and 'stopped working' error for RH8

I have been running the demo versions of FM9 and RH8 under Windows 7 for three weeks with no problems - for no apparent reason both apps stopped working this afternoon.
'Internal Error 9004, 6919244, 9675646, 0. FrameMaker has detected a serious problem and must quit.' error at the Localization phase when launching FM.
'Adobe RoboHelp 8 has stopped working' at the Loading Components phase when launching RoboHelp.
I uninstalled and reinstalled the applications with no change.
Any ideas?
Coincidentally, I purchased and registered the TechCommSuite 2 upgrade this morning, about two hours before this mess started. I have a documentation and Online Help project due today - what a mess.

Pieter,
Simply navigate to c:\users\your name\AppData\Roaming\Adobe and rename the 'Linguistics' folder (Framemaker should NOT be running - otherwise, the folder will be write locked and unable to be modified). As a precaution against doing more damage to my installation I renamed the 'Linguistics' folder instead of deleting the folder (for example, Linguistics.bak). When Framemaker opened it automatically recreated the 'Linguistics' folder as well as the dictionaries, at which point I deleted 'Linguistics.bak'. Since then I have had no problems. By the way, I am running Windows 7; if you are running a pre-Vista version of the OS you will find your 'user' folder under c:\documents & settings. Good Luck.
Thomas

Itunes asked me if I wanted to update software. When I went to update it I got a error message 7 and something about error 126 and now my itunes does not work! Any suggestions?

Hello, is anyone else having a problem with error message 7 for itunes when downloading an update?

Hello, LovinThe Tunes
You will find this article helpful in troubleshooting the error that you are receiving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Regards,
Jason H.

FAX Error Codes 349 and 351

I try to fax my daughter in Florida which is area code 941 and I live in area code 580 (Okla) and I constantly get
Error Codes 349 and 351. I called her numerous times and she is receiving faxes frin all over the country with no problem. Why can't HP find this problem and help me resolve it. I was on the phone over 4 ours with a tech rep and she was unable to resolve it and said she would refer it to her case manager who would not be able to fix it, but would call me sometime on Monday. This is a ridiculous situation. I can send faxes locally with no problem. I have a fiber optics telephone connection. Does anyone have a possible solution. I am really fed up with HP and having to try to explain situations to someone in a foreign country where everything I say has to be repeated back to me takiing up more time.

Hi nmcclell,
I am sorry to hear you are experiencing this issue. I am sure after spending 4 hours on the phone with HP tech support the last thing you want to do it more troubleshooting but I have some information specific to those error codes if your interested. In the unlikely event that maybe something was missed here is the definition and solution for error code 349 and 351.
Error Code: 344, 345, 346, 347, 348, 349 ECM, 350 ECM, 351 ECM, 352 ECM, 353 ECM, 354, 355
Definitions
The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power outages and other power-related problems.
The call-waiting service can cause this error. The click, heard for an incoming call, is actually a momentary disconnect of the line.
The remote user pressed the Stop key while the reception was in progress.
Under rare conditions, incompatibility between the two machines might cause the remote machine to abandon the call.
Solutions
Retryt the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Disable ECM. Errors might still occur, and might result in a degraded image quality on the received page. However, the ability to send the entire document will be improved.
Try sending at a lower transmission speed
Here is a helpful link for Troubleshooting Fax Transmission and Reception Issues.
I hope this helps. I understand if you are not interested in more troubleshooting but thank you for taking the time to reach out to the HP Forums. We are here to help.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Error in RFC and Lower Layer

Hello,
One of the user getting below dialog box error while executing "MASS" transaction in R3 system.
Error in RFC and Lower Layer
Error : SYSTEM_CANNOT_WRITE_TABLE
function rfctr_drvset
module $ld://bas/710_REL/src/krn/rfc/abrfctrc.cpp#3 $SAP
line 1721
Any idea on this would help...
Regards,

Hello Yogesh,
WOuld you still happen to have an idea on how you got this solved ?
Thanks for the feedback.
Rgds
Bart

Error : WWWLSNR32.exe and F50WEB32.exe

I have installed Web Server on Windows NT 4 ,Service Pack 4 with
Oracle 8 RDBMS in a same machine. All the OAS Services are up
manually.At first I can access the server through Internet
Browser but suddenly I get this error when I try to access the
server,
An Application error has occured
and an application error log is being generated
WWWLSNR32.exe
Exception (0xc0000025),Address:.....
and then my Oracle Listener 'www' is DOWN by itself.
and I also get this error:
An Application error has occured
and an application error log is being generated
F50WEB32.exe
Exception (0xc0000025),Address:.....
and now I still can't implement these Oracle solution to my
customer which they have paid.
Please Oracle Experts,give me solution.
Thanks for any help and I really appreciate.
null

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)

Error 8J 290 and Error in method PO_POST

Hi Guys
When changing prices to an existing PO linked to a sales order our client gets the following errors after clicking save button:
"No update of sales order 16668 from purchase order
(error 8J 290)"
and then
"System error (error in method PO_POST)".
Why is this happening? Kindly Rush me any answers, oss notes, etc.
Our client is using SAP-AFS ECC 6.0 version.
thanks
Maruthi Ram
Edited by: MARUTHI RAM on Oct 31, 2008 6:56 AM

Hi,
As per your thread it seems that PR has been generated automatically while creation of Sales Order and you have converted it to PO. (Same as Third-Party Sales Process). If yes then read following carefully.
If a PO has not yet been created, to confirm the quantity change in the requisition, change the sales order with transaction code VA02. Select the item and choose Schedule lines for item. Double-click the schedule line with the confirmed quantity. Choose the Procurement tab, choose Edit and check if the quantity for the purchase requisition has also been updated.
If a PO has already been created, to confirm the PO change, change the sales order with transaction code VA02. Choose Document flow. Select the purchase order and choose Display document.
Result: - The sales order quantity has been changed. If a PO existed, you have changed the PO quantity. Otherwise, you have changed the requisition quantity.
In short, first change the Sales Order quantity and then change the PO Quantity.

Error Opening Address Book, iChat, iCal and Big Bang Board Games

Hello,
I mistakenly trashed the applications list. In order to restore the applications list, I pulled the list out of trash to the desktop and then back to the sidebar. At this point, the applications were not available to the other users of the computer. I then copied the list to the universal applications folder. Now, all but the Address Book, iCal, iChat and Big Bang Board Games work. These applications close "unexpectedly" when I try and open them. The following is the header of the report for the Address Book:
Date/Time: 2007-07-06 10:46:34.136 -0400
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
Command: Address Book
Path: /Applications/Address Book.app/Contents/MacOS/Address Book
Parent: WindowServer [61]
Version: 4.0.5 (487)
Build Version: 12
Project Name: AddressBook
Source Version: 4870000
PID: 272
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
I am hoping to get an answer as to how to rectify this situation. If it is not already obvious, I am new to Macs.
Mike D

Hello Mike:
Welcome to Apple discussions (from where you were on the dark side):
Try a couple of things.
Run repair disk from your software install DVD (until it reports no errors).
If that does not work, I would opt for an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
A&I installs a pristine version of OS X (which would have to be updated, of course) while preserving your files, programs, and settings.
Barry

8540w no display port video output and strange LED error code

Greetings,
my HP 8540w (I5 M 560, Quadro FX 880M) recently started acting a bit strangely.
First the graphics card driver started crashing.
A couple of days ago it started showing this strange I presume it to be an error code:
https://dl.dropboxusercontent.com/u/29403117/IMG_0902.JPG
And today the display port output doesn't detect any monitor (VGA works). The laptop is docked on a HP basic docking station and out of the three display output options only the VGA works.
I've searched the web and found that error codes are displayed only via the blinking num lock and caps lock LEDs. The amber Wi-Fi and HDD LEDs turn on when the laptop is turned off and operate with normal colors while the laptop is turned on.
Has anyone seen this kind of behavior before, will the graphics card have to be replaced or can this be fixed?
Thank you for your replys and best regards.

Hi tehnikk,
Your EliteBook 8540w is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Java seems to be having a buffer error....

Ok let me start by saying I do not know any JAVA programming. I just trying to fix something that some dump programmer charged me a ton of money for and it does not work right...
The program reads a XML stream and creates XML files... The read works great!!! I had someone help me figure out how to get rid of the write code to make sure the read was working and it works great. The problem exists when the files seem to happening when the files are being written... A 1mb file can take up to 8 hours to download and write to a file. But if you get rid of the write the stream can read that entire one meg in 15 seconds. So something tells me its some sort of buffer error or something like that. Here is the code...
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.ServerSocket;
import java.net.Socket;
public class SocketReader
ServerSocket server = null;
Socket client = null;
BufferedReader in = null;
PrintWriter out = null;
String line;
String strTotal="";
public void listenSocket()
try {
server = new ServerSocket(9600);
catch (IOException e) {
System.out.println("Could not listen on port 9600");
System.exit(-1);
try {
client = server.accept();
catch (IOException e) {
System.out.println("Accept failed: 9600");
System.exit(-1);
try {
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(client.getOutputStream(), true); //Getting client's output stream coz its up for grabs
catch (IOException e) {
System.out.println("Accept failed: 9600");
System.exit(-1);
int iCount=0;
int iChk=0;
try {
while ((line = in.readLine()) != null) {
System.out.println(line);
if (line != null)
iCount=line.length();
if (iCount==3){ //(line.startsWith("<?xml")){
if (iChk!=0){
//XMLWriter.writeXML(strTotal.substring(5, strTotal.length()).trim());
strTotal="";
iChk=1;
strTotal=strTotal+"\n"+line;
out.println(line);
out.flush();
//XMLWriter.writeXML(line);
//Send data back to client. Not required. Just writing back to the client coz u have his output stream!
//out.println("Received string" + line);
catch (IOException e) {
//e.printStackTrace();
System.out.println("Read failed");
System.exit(-1);
protected void finalize()
//Clean up
try {
in.close();
out.close();
server.close();
catch (IOException e) {
System.out.println("Could not close.");
System.exit(-1);
public static void main(String[] args)
SocketReader frame = new SocketReader();
frame.listenSocket();
}

A ton of money? Hopefully not too much money, as that code shouldn't have taken more than one hour to write. And it could have been done better (although consultants ALWAYS say that about the previous guy's code).
However if I start telling you what to fix, then I'm going to get into remote debugging and I really don't want to do that. Besides there's a lot of stuff in there that leads me to believe there's some strange requirements. Let me just say that a StringBuffer would have been a much more effective tool to accumulate a big string, if you want to get the original programmer back to fix the code, although that isn't going to help you as a non-programmer.

ECC v6.0 installation error : CJS-30022 and FCO-00011

Hi All,
I enconter the while installing ECC 6.0 in windows 2003 server and MSSQL 2005 as the database. The error occurs during import ABAP phase ( exactly the Job name was SAPSDIC and this is the first job out of 19)
The same issue has been discussed in this forum but for oracle( Please find the link below for it)Kindly let me know how to fix it and since the database i am using it is SQL 2005 i am really confused on what should i change exactly.
Re: Solution Manager v4.0 installation error : CJS-30022 and FCO-00011
regards,
Anandha Krishnan.R

Sunil,
The log file is pasted.
===== Log file of import.monitor.log =============
TRACE: 2007-04-18 18:45:15 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -ctf I "E:\SAP ERP 2005 IDES\51032413_4_IDES SAP ERP 2005 SR2 Inst. Export\EXP4\DATA\SAPSDIC.STR" "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-04-18 18:45:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-04-18 19:00:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-04-18 19:01:00
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-04-18 19:01:00
1 error(s) during processing of packages.
INFO: 2007-04-18 19:01:00
Import Monitor is stopped.
===== Log file of import.monitor.java.log =============
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
===== Log file of SAPSDIC.TSK =============
T F4TMP C ok
P F4TMP~0 C ok
D F4TMP I ok
T F4UHLP C ok
P F4UHLP~0 C ok
D F4UHLP I err
Note : Other than the last task all the other tasks were found to be ok
===== Log file of SAPSDIC.log =============
(DB) INFO: ENHA_TMDIR~CMP created
(DB) INFO: ENHA_TMDIR~ENH created
(DB) INFO: ENHA_TMDIR~MTD created
(DB) INFO: F4TMP created
(DB) INFO: F4TMP~0 created
(IMP) INFO: import of F4TMP completed (1404 rows) #20070418185312
(DB) INFO: F4UHLP created
(DB) INFO: F4UHLP~0 created
(CNV) WARNING: code page conversion problem
Number of substitutions: 5
(row 3322 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 22 04 3e 04 47 04 3a 04 38 04 20 00 20 00 20 00 |".>.G.:.8. . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 9
(row 3323 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 23 04 41 04 3a 04 3e 04 40 04 35 04 3d 04 38 04 |#.A.:.>[email protected].=.8.|
VALUE 35 04 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |5. . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 4
(row 3324 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 26 04 38 04 3a 04 3b 04 20 00 20 00 20 00 20 00 |&.8.:.;. . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 7
(row 3325 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 27 04 30 04 41 04 42 04 3e 04 42 04 30 04 20 00 |'.0.A.B.>.B.0. .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 13
(row 3326 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 15 04 3c 04 |-.;.5.:.B.@...<.|
VALUE 3a 04 3e 04 41 04 42 04 4c 04 20 00 20 00 20 00 |:.>.A.B.L. . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 19
(row 3327 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 21 04 3e 04 |-.;.5.:.B.@.!.>.|
VALUE 3f 04 40 04 3e 04 42 04 38 04 32 04 3b 04 35 04 |?.@.>.B.8.2.;.5.|
VALUE 3d 04 38 04 35 04 20 00 20 00 20 00 20 00 20 00 |=.8.5. . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 18
(row 3328 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 38 04 47 04 |-.;.5.:[email protected].|
VALUE 1d 04 30 04 3f 04 40 04 4f 04 36 04 35 04 3d 04 |[email protected].=.|
VALUE 38 04 35 04 20 00 20 00 20 00 20 00 20 00 20 00 |8.5. . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 16
(row 3329 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 38 04 47 04 |-.;.5.:[email protected].|
VALUE 35 04 41 04 3a 04 38 04 39 04 20 00 42 04 3e 04 |5.A.:.8.9. .B.>.|
VALUE 3a 04 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |:. . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 7
(row 3330 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3d 04 35 04 40 04 33 04 38 04 4f 04 20 00 |[email protected]. .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created
(DB) INFO: GCTAB created
(DB) INFO: GCTAB~0 created
(IMP) INFO: import of GCTAB completed (0 rows) #20070418185312
(DB) INFO: GUI_FKEY created
(DB) INFO: GUI_FKEY~0 created
(IMP) INFO: import of GUI_FKEY completed (335 rows) #20070418185312
(DB) INFO: VRSX4~1 created
(DB) INFO: disconnected from DB
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20070418190034
regards,
Anandha Krishnan.R

Output errors, Transmit discards and big buffer errors on 1121 AP

Similar Messages

Maybe you are looking for