Output fax not working.
Hello All,
I am facing an issue with the Fax output of the PO.
When the PO is created it goes for a backend release.Once release the PO has to go as Fax.
But after the release it is not showing the created user.Instead it comes as the default user WF-BATCH.
I need the creater name to appear in the FAX.Can anyone help me out with this issue.
For the POs which are not released via workflow are taking the user id to the FAX.
Regards
Raju
Hi Sudhir,
The solution in the thread are for SRM.
Do we have any solution for the POs in ECC6 R/3?
Thanks
Raju
Similar Messages
-
audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot
Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
RH 5.5 output does not work properly in RH 7
I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3. -
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case. -
Output fax not getting triggered when sales order credit block is released
Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PMHi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1 Order 2*
1. ZFAX 1. ZFAX
10(Z010) 10(Z010)
0000122426 0000122427
2. ZFAX 2. ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM -
T.37 offramp fax not working
Hi,
I have implemented onramp and offramp for my customer. Onramp fax is working fine but the offramp fax is not working. When we test with facsBridge T37 we do not see fax coming on CME router.
Router configuration is
Model: 2911
IOS: 15.4(2)T
I have enabled the mta and foip debugs but no logs are generated. But when I run the wireshark debugs on laptop on which facsBridge application is running, I see acknowledgement from router. But Microsoft fax application which uses facsBridge as modem do the retransmission 2-3 times and then give fatal error.
I am not sure if issue is with config or i am hitting bug. Please guide me how to resolve this issue.one update...on wireshark i am seeing RST, ACK from router which means it is reseting the session...but could not find reason for that. i tired with app_faxmail_offramp.2.0.1.1.tcl and app_faxmail_offramp.2.0.0.0.tcl script, but results are same.
Below is config of cme.
fax receive called-subscriber $d$
fax send transmitting-subscriber $s$
fax interface-type fax-mail
mta send subject Fax from On-Ramp GW
mta send with-subject $s$
mta send postmaster [email protected]
mta send mail-from hostname xxxxsolutions.com
mta send mail-from username info
mta receive aliases xxxxxsolutions.com
mta receive aliases smtp.gmail.com
mta receive aliases 10.1.30.13
mta receive generate mdn
mta receive generate permanent-error
application
service onramp flash:/its/app_faxmail_onramp.2.0.1.3.tcl
service offramp flash:/its/app_faxmail_offramp.2.0.1.1.tcl
service offramp1 flash:/its/app_faxmail_offramp.2.0.0.0.tcl
service fax_detect flash:/its/app_fax_detect.2.1.2.4.tcl
param redirect-number 106
param mode default-fax
dial-peer voice 7010 mmoip
service fax_on_vfc_onramp_app out-bound
max-conn 10
destination-pattern 4652746
information-type fax
session target mailto:[email protected]
incoming called-number 4652746
mdn
dsn success
dsn failure
dial-peer voice 7020 mmoip
service offramp1
max-conn 10
information-type fax
incoming called-number 9T
image encoding MH
image resolution standard
mdn
dsn success
dsn failure -
Audio output is not working in preferences
MacBook Pro 17" late 2012 - running lion for the last 6 mon, just did 10.8.3 upgrade as instructed. Now I have no audio control on output. Icon in menu is grey and the the preferences' control for output are grey . Output, which is set to Digital-what happened to internal speaker controls. Verified disk, reset permissions, did a pram-restart, and a few restarts from there. Still no audio, but the digital light did come on once out of the earphone jack. Did the earphones and no sound. Correction, the earbuds are now working, they were not working earlier. SUGGESTIONS please!
Hello bacon48,
Welcome to the Apple Support Communities. If you want to know more about troubleshooting the audio on your MacBook Pro, the following article will assist with that process.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Regards,
-Norm G. -
Bridge CC Output Module not working for me
I have installed the Output Module in Bridge CC (Which I can't believ was not included and that it is not an auto update as I thought was one of the big positives of this whole CC concept) but while it opens and looks ok, when I try to create and save a pdf contact scheet, I get a message saying "The file or folder does not exist." and nothing is created or saved. What gives? This is a major feature of Bridge to me as I use it a lot.
By the way, the web gallery does not work at all, either.Have you read through the help doc http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
-
REST Web Service Output Parameter not working in POST Handler
I've created a RESTful Web Service in Oracle Apex, using a POST method as "handler". I've setup 11 input parameters which all work fine, it is my one output parameter that does not return successfully.
Here is detail on the Output Paramter
Name: returns
Bind Variable Name: :returns
Access Method: OUT
Source Type: Response
Parameter Type: String
The actual source is a call to a pl/sql package that returns a value that I set :returns equal to (eg :returns := v_result). I've tried this with Source Type Header and still the same result, 'no output'.
I see APEX is calling wwv_flow_api.create_restful_param to generate the parameters (for importing), is there any documentation on this procedure?
How can I get this output parameter to return something in the response?
The request accepts a Json payload.
Any help greatly appreciated
Thanks,
JamesSolved my own problem :returns does not work needs to be returns
Does Not Work
Name: returns
Bind Variable Name: :returns
Access Method: OUT
Source Type: Response
Parameter Type: String
Does Work
Name: returns
Bind Variable Name: returns
Access Method: OUT
Source Type: Response
Parameter Type: String -
Output Module Not Working - Limited Options
After upgrading to After Effects CC I am facing problems when using output modules in the render queue.
I can use one of my Output Module presets as a starting point but when I try to change the settings, it only shows a limited number of options. For example, If I choose a H.264 preset and try to adjust the settings, it changes to show me the options for an AVI and the dropdown list only shows a limited range of options. (see below image)
This is annoying, I can't even change the data rate or audio options of a preset.
Has anyone else experienced this issue?
Thanks
AidanRendering h.264 from the output module will work like it did before. The problem with using the Output module is that h.264 movies will just not look very good when compared to movies rendered with the Adobe Media Encoder with the same data rate. Sure you can jack up the data rate and get better looking movies, but all GOP compressed (mpeg) formats require multi pass processing to reduce motion and color artifacts at data rates suitable for distribution. That is why you are better off rendering highly compressed video using the Adobe Media Encoder.
The only time you don't want to render a composition directly in the AME is when you are using GPU accelerated Ray-traced rendering for things like extruded text. In that case you should use the Render Cue to render to a lossless or nearly lossless production codec so AE will take advantage of the GPU, but here again, there is a catch. You must have a compatible NVIDIA graphics card to effectively use this new feature.
Personally I have never understood the desire to use the Output Module for h.264. It's slower and produces less quality than the AME. -
Sales Order - Output determination not working
Dear Friends,
Greetings!
I have a strange problem,
Order Acknowledgement is to be emailed out automatically on meeting requirement 902 on order save. It goes out to customer (Output: ZBAC: Partner SP: Customer copy different layout), and commissioned agents (Output: ZEC1 to ZEC5, upto 5 partners: C1 to C5, Rep copy layout). Customer copy - ZBAC works fine, but ZEC1-ZEC5 rep copy output does not appear at all.
here is <u>output analysis</u> for ZEC1 and ZEC2:
ZEC1 529 No condition access - if desired, please set in Customizing
ZEC1 562 This output is not defined for Customer 0001010059
ZEC2 529 No condition access - if desired, please set in Customizing
ZEC2 562 This output is not defined for Customer 0001010059
All output types use same <u>access Sequence</u> as below:
1 5 Sales Organization/Order Type 0
2 13 Sales Org. 0
3 7 Order Type 0
Sample <u>Output Procedure</u>, using requirement 902
2 1 ZBAR Ord Conf. - Rep copy 902 >>> Rep copy, I originally thought would be possible to create 5 condition records with partners C1 to C5; but
3 1 ZBAC Ord Conf. - Customer 902 >>> Customer copy
930 1 ZEC1 eMail Partner C1 902 >>> Rep copy should go to partner C1
931 2 ZEC2 eMail Partner C2 902 >>> Rep copy should go to partner C2
932 3 ZEC3 eMail Partner C3 902 >>> Rep copy should go to partner C3
933 4 ZEC4 eMail Partner C4 902 >>> Rep copy should go to partner C4
934 5 ZEC5 eMail Partner C5 902 >>> Rep copy should go to partner C5
<u>VV12 Output record for ZEC1: by Order Type</u>
ZOR Sales Order C1 5 4 EN
ZOR Sales Order C2 5 4 EN
<u>VV12 Output record for ZBAC: by Sales Org</u>
3000 Rochester Operations SP 5 4 EN
>>> C1 and C2, SP Partner does not get description, when I click F4 then SAP throws following message: Possible entries only for mail addresses and PD Org objects Message no. VN341
Appreciate your feedback, let me know if any additional information required.
thank you,
Hetalcheck in NACO transaction is you have assigned access sequence to your ZEC* output ytpes and if you have ticked checkbox "Access to output conditions" - otherwise it will not even try to access condition records.
From help :
Access to output conditions
Indicates whether the system determines the output by searching for valid
condition records.
Procedure
If you want the system to search condition records for the appropriate
output, mark the field.
Note
If you leave the field blank and if you are processing sales, shipping,
or billing documents, the system automatically determines output from
information stored in the customer master record. -
Hi!
The sound output of the PowerBook G4 I use at the office is not working now. When I had a look at the Preferences Pane, it says no Output Devices Found. Not even the built-in speakers.
Is there anything I can do, or should I take to some Technical Service?
ThanksWelcome to the Apple discussions.
Try resetting PRAM http://support.apple.com/kb/HT1379 . This can sometimes fix sound problems. -
The sound output does not work on my ipod
Hi There,
I have an Ipod 4 th generation and the sound output no longer works on any device. I've reset and reinstalled the software but nothing appears to work?
Any ideas please?
Serial number: 9C6463XJV9R
Thanks ChrisIf none of the 5 R's helped address the issue, it's likely hardware related.
http://www.apple.com/support/ipod/five_rs/
As to what exactly is damaged/faulty, no there is no certain way to tell. It could be the iPod's audio chip or something else on the logic board.
Either way you'll need to have your iPod serviced/replaced either by Apple or a third party company.
B-rock -
Qosmio X500 and HDMI output does not work automatically
Sorry for my english..
Good morning.
I have a Qosmio x500 recently that runs on Windows 8.1
Previously, when I plugged in a hdmi cable from the PC to the TV, I had ( Samsung TV ), after a beep on the PC , automatically binding and made ??the TV is lit ( if it was in standby).
I could even control the PC with the TV remote control, put a movie , pause, etc.. Super convenient!
Source indicated on the TV Anynet + Toshiba pc.
And when I commutais with the TV remote control on TV, the PC screen is lit .
Off, despite repeated attempts with at least 5 software (drivers ?) Different Toshiba certified HDMI, I do not have it and I have to manually switch to see the PC on the TV (choose HDMI source on the TV) .
HDMICtrlMan is a folder where after installation, there are:
ChangeOutput.exe
HCMSoundChanger.exe
HDMICtrlCfg.exe
HDMICtrlMan.exe
But nothing works !
I also updated the video and audio driver: gforce gts 360m
But now I hold!
And I do not know the logical progression of the computer when you plug an HDMI cable (totally depends on the graphics chip ?).
If someone has an idea or experience of this problem, thank you in advance>The problem is that with the drivers windows 7 64 bit, HDMI worked.
The problem is that you changed to a Windows system which is NOT supported on this notebook.
Of course you can use Windows 8.1 on this Qosmio X500 model but this does not mean that all notebook features would work properly.
Windows 8.1 is completely different and many Windows 7 tools and utilities are not compatible with Win 8.1
I dont know if this will help you but the Windows 8.1 Toshiba System Driver is very important software when in comes to use Windows 8.1 on Toshiba notebooks.
Try to install this Windows 8.1 Toshiba System Driver released for Qosmio X870/875 series.
But if this will not work, I dont see any other possible solutions.
Either you will give up the Windows 8.1 and will switch back to supported Win 7 or you would use Win 8.1 but without the automatic HDMI support. -
Red light coming from my audio output, speakers not working
I read somewhere about wiggling a toothpick around in there, but that didn't work, any other ideas.
This happened after I had a 1/4 to 1/8 converter plugged in there to use a little mini amp.
I've lost the use of speakers.
headphones work fine
I think the optical input is still reading as if something is plugged in. Not sure if there's something in my system I need to switch, or if I need to take it in, have the jack opened up and replacedJust to rule out the obvious make sure your mute switch (F3) is not on. If your 'switch is stuck' you would see a red light coming from the headphone port.
Double check your Sys Prefs - Sound settings ...if things still are not working you might try a SMC reset followed by a Pram reset that would restore your orig. settings.
Maybe you are looking for
-
Time Machine Backup Disk Cannot be found
While my iMac was in sleep mode, I disconnected the power to my external, firewire time machine backup disk. The backup is a Western Digital hard drive. Now I get the error message "Your Time Machine Backup Disk Cannot be Found" I have rebooted the c
-
How do you put websites in alphabetical order on pages for iPad?
Trying to find a way to put websites into alphabetical order on pages for iPad. Any ideas?
-
Photo stream doesn't work on my PC and keeps turning off
Can any one resolve the following problem? Updated to latest version of iCloud for PC..initially worked with previous version for about a week then stopped working. Ta Keith
-
Email attachments not saved to document library
Another system generates a report and emails it to a sharepoint document library - the email has a PDF report attached - but the pdf file is not extracted and saved to the document library. We are saving the original incoming email in the library, a
-
How to capture profile option value in Controller in OAF?
Hi, I have a requirement to capture the value of profile option value in Controller in OAF? How to write the code for this? Thanks