Output file is not reaching the destination

Hi,
  I am doing a simple file to file scenario using SAP PI 7.0. I am posting my input file in one location and after a simple mapping I need to receive my output in another location.My file is getting picked up and I can see that in the message monitoring it is showing the status as To Be Delivered. I have tested my configuration.That seems to be fine.
  The problem is I am not getting the file in the destination.
  Please send your suggestions on how to rectify this.
Thanks in advance.
Regards,
Tiny

Hi,
Are you able to see the chequred flag for the scenario which you created.
Check whether the file was picked only for the scenario which you are executing.
Check the file name specified in the sender CC
Check whether the target directory exists if not have you enabled the option to create the target directory in CC.
Also do the check whether the scenario is working by testing the configuration in the ID.
Go to ID->Tools> Test configuration> and provide the necessary details along with the payload information and check whether the scenario is correct.
Also check you receiver determination, Interface mapping and receiver determination created for this scenario.
Regards,
Nithiyanandam

Similar Messages

  • Some emails not reaching their destination

    Since moving from MobileMe to iCloud some emails are not reaching their destination.

    the same way!
    Some letters do not reach the destination with iPad iCloud mail. In iCloud they fall into the "Sent", but do not come to a different destination some letters.

  • "file already exists in the destination" during application build

    I am trying to build an executable and have gotten the following error:
    The file already exists in the destination.
    C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\Sentech LV 82\Shared Library - Trigger SDK\StTrgApi.dll
    WHen I start the build I go to "Build Executable" then click "Build"
    The VI for the project I have open is the Startup VI and I do not list any Dynamic VIs or Support FIles.
    I am using Labview 8.2
    I installed a user library for a USB camera from Sentech wich I am using and it works fine in Labview 8.2
    When I try to do the build I get the error shown above. The file it is referencing is there along with the .lvlib file.
    I tried removing the file shown in the error message to see what would happen and I continue to get the same error even though the file is not there. I even restarted LV and still got the same error.
    I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
    Thanks
    Keith

    I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
    Thanks
    Keith
    Hi Keith,
    you can check this Link out for a tutorial on app builder.
    Regards,
    Denver 

  • Output file in not a proper format

    Hello, My JAVA program generate an output file using FileWriter. The name of output file is output.dat (ie a NOTEPAD file). But when I open up the file it is not in proper format. All the text get clustered. But when I open the same file in MircoSoft Word its open with no problem. Is there any solution to this problem.
    bye

    Most text editors will accept '\n' alone as the line terminator. Notepad is an exception.
    Workarounds are:
    1. Write an '\r' immediately before each '\n'.
    2. Get a decent text editor.

  • File to file secnario output file is not created.

    Hi,
    while creating the file to file secnario, file is picked by xi server and shown to sxmb_moni but output file is not created.
    Please help.

    HI
    Go to RWB->Message Monitoring->Message Display Tool(MDT)->Audit Log and check the status..
    Go to SMQ2 and check is there any queue is pending in the Queue..
    If so try to activate it. For this you can refer this blog-
    XI :  How to Re-Process failed XI Messages Automatically
    If not-then check the configuration again-
    1) Check the Receiver Communication channel for the FTP URL/File creation mode etc
    2) Are you able to see the mapped data in SXMB_MONI..
    3) Reciever Agreement/Reciever Determiation/Interface Determination
    Check if you have given a Write Access to the folder in which the file is to be placed
    Thanks
    Gaurav

  • HT4061 I need to sync my iphone and ipad to my new computer.  I just downnloaded itunes in it.  my song and album files are not in the new downloaded itunes.  how do I import them in?

    I just downloaded itunes on my new computer which uses Windows 7. I need to sync my ipone 4S and ipad to it.  I noticed my complete song and album files are not in the new itunes.  how do i get them imported to the new itunes.  Would syncing my iphone and ipad do it?

    In iTunes, go to File>Add File to Library or File>Add Folder to Library.

  • The Downloaded PDF file does not contain the Signature through BSP pages

    HI,
    We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
    This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
    To satisfy the above requirement we have done the following steps.
    1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person. 
    We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
    2) WE also Modifed the Dirver program to Download the above document in a .PDF  file. 
    The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
    We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
    3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
    4) We wrote a BSP program to download this ulploaded PDF Files.
    BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
    The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
    All other data in the dowloaded PDF file is Perfect other than the Signature.
    When we open the downlaoded PDF file it give's following  message on the Signautre page.
    " Xobject not found named 00013"
    The number of the Object comes different to different files.
    We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
    We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
    Please suggest some solution if you can
    Thanks in advnace.
    Re
    GAGAN

    HI,
    We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
    This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
    To satisfy the above requirement we have done the following steps.
    1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person. 
    We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
    2) WE also Modifed the Dirver program to Download the above document in a .PDF  file. 
    The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
    We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
    3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
    4) We wrote a BSP program to download this ulploaded PDF Files.
    BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
    The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
    All other data in the dowloaded PDF file is Perfect other than the Signature.
    When we open the downlaoded PDF file it give's following  message on the Signautre page.
    " Xobject not found named 00013"
    The number of the Object comes different to different files.
    We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
    We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
    Please suggest some solution if you can
    Thanks in advnace.
    Re
    GAGAN

  • The message is not reaching the outgoing communication channel

    hi forum help..............
    i have a IDOC-XI--JDBC scenario...
    my xi receives an idoc from a sap ecc.....does a simple mapping to a jdbc structuuure and then writes to a databse....
    it was working fine..... but now i had to change the JDBC adapter configuration..means in the integration builder(configuration).. i changed the name of my database server.....
    now after making that change ....... the message is not reaching the outgoing communication channel....
    i cant see any error in the sxmb_moni....
    but there is no log for the message processing in the communication channel in the RWB............

    hi,
    Is the Database is running on the same server  and the same tables and all are existed with same structure.
    Database name is changed then you would have to check all . and after changes , did you activated ?
    If every thing is correct, then refresh Cache.
    For cache related see the below links
    /people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
    XI Runtime cache error: Cache contents are obsolete
    Cache Refresh - SAI_CACHE_REFRESH
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Regards
    Chilla

  • Rendered html pages in results file(html) not showing the images of origina

    hi,
    rendered html pages in results file(html) not showing the images of original page
    when i click on rendered html pages of different html section of a results file.
    both master and tested as well.
    thx
    pasumarthi

    By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
    The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
    Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
    Regards,
    Zuriel

  • Skinned scrollbar thumb does not reach the bottom of the track

    I have an application in Flex 4.1 where there is a vertical List, bound to an array. As long as the List scrollbar is not skinned, everything is ok, the thumb oscillates from top to bottom of the track. But after adding a skin it works bad. The thumb never goes to the very bottom of the track when scrolling, but locks somewhere in between. For very long list of elements, it even stops halfway.
    Despite of this behavior, the list is in fact scrolled to the last element - so the problem is not with some elements at the bottom of the list being unreachable, but it is only about the thumb not reaching the bottom of the track, which looks as if the list was locked halfway. The skin is very simple and it is just about defining an image for the track and thumb. Is there any method to ensure that the thumb always goes to the bottom of the track, regardless list size?

    I have 3 skins: for the scrollbar itself, for the track and for the thumb.Thumb and track skins are using fxg vector images, but exactly the same negative result is without fxg images, e.g. only using simple filled rectangles in place of the fxg - I just checked it.
    For Scrollbar:
    <?xml version="1.0" encoding="utf-8"?>
    <s:SparkSkin
            xmlns:flex="http://ns.adobe.com/mxml/2009"
            xmlns:s="library://ns.adobe.com/flex/spark"   
            minWidth="15" minHeight="35" alpha.disabled="0.5" alpha.inactive="0.5" >
         <s:states>
            <s:State name="normal" />
             <s:State name="inactive" />
            <s:State name="disabled" />
        </s:states>
        <s:Button id="track" 
                  focusEnabled="false" alpha="0.3"
                  skinClass="skins.VPhotoScrollbarTrackSkin" />
        <s:Button id="thumb"
                  focusEnabled="false" visible.inactive="false" alpha="0.5" left="-5"
                  skinClass="skins.VPhotoScrollbarThumbSkin" />
    </s:SparkSkin>
    For the thumb:
    <?xml version="1.0" encoding="utf-8"?>
    <s:SparkSkin
        xmlns:flex="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:fxg="fxg.*"
    >
        <s:states>
            <s:State name="up" />
            <s:State name="over" />
            <s:State name="down" />
            <s:State name="disabled" />
        </s:states>
        <fxg:thumb />
    </s:SparkSkin>
    For the track:
    <?xml version="1.0" encoding="utf-8"?>
    <s:SparkSkin
        xmlns:flex="http://ns.adobe.com/mxml/2009"
                 xmlns:s="library://ns.adobe.com/flex/spark"
                xmlns:fxg="fxg.*"
    >
        <s:states>
            <s:State name="up" />
            <s:State name="down" />
            <s:State name="over" />
            <s:State name="disabled" />
        </s:states>
        <fxg:track  />
    </s:SparkSkin>

  • Why does my image not reach the edges of the page when printed, but appears fine as pdf?

    Why does my image not reach the edges of the page when printed, but appears fine as pdf?

    Check a printable area of your printer.
    Make a (grey) rectangle that is larger than the paper size. Print it,
    you'll get a message that some cropping will occur, that's okay. Then take a
    ruler and measure the dimensions of the rectangle printed on the paper or
    the white borders around the printed rectangle.

  • Does anyone know why I am having formatting issues with my tablet and phone sites? I only have the desktop layout. There are banners and footers not reaching the edge of the screen.

    I only have the desktop layout. As I was having such problems with the tablet and phone layouts. However there are banners and footers not reaching the edge of the screen. This is only a problem when accessing the site via a phone or tablet.
    the site is www.excellententertainment.biz
    Cheers
    Hughie

    Do a Select all on your pages (Most likely a master page if it effects all pages) and you will likely find an empty element or element that extends past the design edges in your desktop design.

  • I can not reach the screen to enter passcode, the main sreen is where im stuck, i cant play music, the home button works but icant get pass the whole unlock thing, i can receive calls but can answer because when i touch the screen it wont do.

    i can not reach the screen to enter passcorde, the main screen is where im stuk, i cant play music,i can recive calls

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • Please helpJ2EE  engine JCO did  not reach the "starting application" state

    Hi,
    I get the following error "J2EE  engine JCO did  not reach the "starting application" state"   when I try to install my Java components  using SAP Development  Studio.
    When I checked my std_servero.out the get the following error
    [GC 65868K->39262K(128320K), 0.0173335 secs]
    [GC 65942K->39031K(128320K), 0.0071339 secs]
    [GC Full GC[Unloading class com.sap.engine.customizing.ccms.CustomizePerformanceMTEObjectImpl0]
    [Unloading class com.sap.engine.customizing.ccms.CustomizeSingleMessageMTEHomeImpl0]

    Hello Santhi
    The GC messages you see are just an indication of the garbage collector activity. It is not an error.
    I'm not sure about what you are doing with the Developer Studio. I guess your WAS Java is already installed, is it right? Are you able to start the visual administrator? Please, paste here the exact error you receive.
    Regards,
    Désiré

  • Planning Quick Win Error: Registration file does not match the app version.

    Gents,
    I have a Fusion 11.1.2 install on a Windows 2003 server environment.
    After creating the Planning App in Classic mode, I logged back in to Initialize the App... and I got this.
    This occurred when I tried to log on to the Planning App in Workspace. (I was about to go Create/Refresh the app) :
    "An error occurred while processing this page. Check the log for details.Please close the current tab and open application again. Single Sign on Validation failed"
    The SharedServices_Security.log goes as follows:
    2009-05-12 16:08:11,437 ERROR [http-28080-Processor3] com.hyperion.css.common.CSSUtils.checkValidArgument(Unknown Source) -- 26:1002:Invalid value for identity. Enter a valid value.
    2009-05-12 16:08:11,468 WARN [http-28080-Processor3] com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) -- Exception getting Child Roles in hierarchy [Root Cause: 26:1002:Invalid value for identity. Enter a valid value. ]
    2008-05-12 16:42:47,781 WARN [http-28080-Processor9] com.hyperion.css.spi.impl.nv.XMLRoleRegDocumentModel.recurseDocumentTree(Unknown Source) -- The Product 'Hyperion Planning' Version 'HP-9.5.0' in the Registration file does not match the application version '9.5.0'
    Any suggestions?
    Thanks.
    Eric.

    Hi,
    If you are running on a Microsoft OS, have a look the log :- :\Hyperion\logs\services\HyS9Planning-sysout.log
    Not sure how much information it will give though.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for