Output for a Single Handling Unit from Shipment

Hi,
I would like to know how to issue an Output for a Single Handling Unit from Shipment, i mean i have attached an output type 'ZPN0' (Customised) to a Handling unit in the Tcode VT03N to a Handling Unit.
VT03N>click on Handling unit icon> select a handling unit --> go to Extras --> Output --> give the Out put type (maintained)) -- > saved.
Once i come back --> i did not find any option / icon to issue the output from VT03N for handling unit. We have an option to issue output for the Entire Shipment.
Tried alternative by going to VT70, give the shipment no, and output type for handling unit. When executed, Getting a message "No Messages Found".
let me know how to issue the output for a handling unit of the shipment. Only Handling Unit & not the entire shipment.
Regards,
Swapna

Hi,
For VT70 transaction have entered the Print control and Output device.

Similar Messages

How to Issue Output for a Single Handling Unit from Shipment

Hi,
I would like to know how to issue an Output for a Single Handling Unit from Shipment, i mean i have attached an output type 'ZPN0' (Customised) to a Handling unit in the Tcode VT03N to a Handling Unit.
VT03N>click on Handling unit icon> select a handling unit --> go to Extras --> Output --> give the Out put type (maintained)) -- > saved.
Once i come back --> i did not find any option / icon to issue the output from VT03N for handling unit. We have an option to issue output for the Entire Shipment.
Tried alternative by going to VT70, give the shipment no, and output type for handling unit. When executed, Getting a message "No Messages Found".
let me know how to issue the output for a handling unit of the shipment. Only Handling Unit & not the entire shipment.
Regards,
Swapna

Dear Swapna ,
maintain out put type for handling units in V V 61

Output type for non assigment Handling Unit

Hi All.
I would like to make a Output type for non assigned Handling Unit
Can anyone tell me about it?
Edited by: John Brown on Feb 9, 2010 10:53 AM

Make a new output type, transaction NACE, application V6 (Handling unit) and assign the output type to your output procedure.
Create a new output requirement, transaction VOFM and assign it to the output type in the output procedure. In the requirement check on KOMKBV6-VPOBJ. The value of KOMKBV6-VPOBJ shows to which object the handling unit is assigned: '00' or empty for not assigned, '01' for outbound delivery. See the domain VPOBJ for all possible values.
Reagards Jack

More than one deliveries into a single handling unit

Hello,
We are a retail apparel company and use SAP to communicate delivery requirements for our stores. We would like the ability to consolidate our deliveries into a single handling unit. This will help reduce freight and will simplify our receiving process in our retail stores.
For example, many customers pre-order merchandise that will be received into our distribution center and then shipped to a Retail store for customer pickup. We would like to consolidate mutliple orders going to the same place so that they can be packed into a single box. Each customer request results in an order being created and the box that the order is packed in is the SAP handling unit. The issue we have is that if 10 customers request the same merchandise, it is easier to pack the 7 units into a single handling unit (i.e. box) than to pack 7 boxes.
I do realise that the handling unit table VEKP can hold only 1 delivery object (i.e. VPOBJKEY), however I'm hoping that someone can highlight possible options for us to simplify our shipping process.
thanks in advance
RJ
if we need to utilize shipments, is someone able to walk through what setup steps would be required.

Dear RJ,
You may use WAVE concept in WM in order to accomplish the requirement.
A wave is group of deliveries that can be combined into one order based upon the customer number.
For example: If you have 10 different orders from customer XYZ and you may consolidate the all sales orders in one single order and then create a WAVE for that.
Thanks,
Babu.

Identifying single motor units from EMG data

I need to identify single motor units from EMG data and have been unable to find anything on the NI web site that could help. I have identified a third party program, Spike 2 from Cambridge Electronic Design (CED), that is able to do the job however I have already go a large investment in NI hardware and software and do not want to have to buy all the CED hardware. I was wondering if anyone knew if it were possible to control the spike 2 program from inside LabVIEW (in close to real time), or if there was a LabVIEW based solution that I have been unable to find.

Sorry for the confusion.
This post is regarding template matching/detection of events from a nosy analogue signal. It is a medical application, not a motor/servo application. The term �motor unit� refers to the action potentials found in electrical recordings taken from muscles (EMG). By identifying the occurrence of these events we can determine properties of the nerves controlling these muscles. However identifying these events is very difficult as the recorded signals are noisy and the shapes of these units change over time. Many researchers have attempted to design computer-based solutions to this problem but is has only been with recent improvements in computer power that a solely software based solution for real time pattern matching has been possibl
e. Although this application is specific to medical research (and electrical recordings of nervous system activity in particular) the number of research laboratories around the world attempting to perform such analysis is large enough that I though a LabVIEW base solution may exist.
Barring a LabVIEW based solution I was wondering if anyone knew if it were possible for the data to be acquired in LabVIEW then directed to Spike2 (the most common program used for this application) in almost real-time. I know I can record data in LabVIEW and save it as a text file then open it up in Spike2 but I do not know if I can stream the data into Spike2 online. Online processing of the data is necessary to determine the progress of the experiments.

Error:Assign handling Unit from one Process order to another process order

Hi Experts,
I am facing different issues in assigning handling unit from one process order to another.
Business process:
1. Two similar Process Orders are existing in the system
2. Delivery is created for first process order using LP10 for one or more components
3. TO is created in foreground using VL06P
4. TO is confirmed by providing in stock available Handling Unit (HU) / storage Unit details Using LT12
5. Customized transaction is used to reassign newly created HU (created in previous step) from first process order to second process order. As a result many steps are performed in background for delinking the HU from first process order to second process order (including creation of different TOs)
I am facing different issues in the process:
1. Sometimes while confirming the TO in step 4: error is received as "Reservation item 0065 with material 4013959300300 does not exist" OR "Reservation item with material does not exist"
2. If the TO is confirmed in step 4. I am facing error in step 5 as "Warehouse number does not exist (new selection required)"
Both these errors are standard errors and I could not find much information on them in SCN also.
If anyone can throw light on any of them then it would be great.
Please let me know if any additional information is required.
Thanks
Harsh Aggarwal

Hi Manish
Thanks for your response. Actually, the customized program is used only in fifth step and not till TO confirmation so that error is not related to Customized program. However, in some cases I am able to do the confirmation but the error is received in 5th step i.e. Warehouse number does not exist (new selection required)"
Any further guidance you can provide. I will ask ABAP to check the customized program but the error seems to be a standard error.

Goods Issuing Many Materials From a Single Handling Unit

Hi Experts!
I have searched threads and asked various contacts how to do this but can't get anything beyond the basics of handling units that we have already implemented.
I am using handling units to pack outbound deliveries and have managed to get to the point where the packaging material is goods issued, however when the product is packed we use (for example)
- a box
- a label
- some sealing tape
- some ink etc
and I want to be able to goods issue all the items involved not just a single packing unit - does anyone know how to do this?
(I have looked at multi level packing e.g. put a product in a box and 10 boxes onto a pallet, but this would only goods issue the box and the pallet)
Thanks in advance!
Simon.

Hi,
I am using packing instructions set up in POP1 and assigned to a customer via POF1 to pack a number of products into a box. The box (packing material) is inventory managed so when the delivery is created and a plant assigned to the handling units it creates an extra line on the delivery that can be post goods issued. We have auot packing set up on the delivery type I am using. This works fine.
My question is that the above set up only post goods issues one of the items used in packing my finished products (in this case a cardboard box), I am trying to find a way of goods issuing other packing materials at the same time such as packing placed with the product inside the box, the tape used to seal the box and the label that we will put on the side of the box.
I think that it would be possible to use a process order and complete the activity in PP and use a Bill Of Materials, however I want to see if I can take advantage of the automatic packing functions.
I hope that this makes sense.
Regards,
Simon.

Function Module for UNPACKING Handling Unit from Inbound Delivery

Hello Experts,
I am working on a RFID program to Receive goods from vendor...
One of the steps of the program should CHANGE the quantity inside a received batch.
To do so, I need to UNPACK the Handling Unit first... then change the quantity.
I am using the following Function Modules to do so:
- 'HU_GET_HUS'
- 'V51P_FILL_GT'
- 'HU_PACKING_AND_UNPACKING'
- 'HU_POST'
First 2 FM works fine...
But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
Have anyone done this before??
Here's the code I've done to do some testing before putting it into my code...
PLEEEEEEEEEEEASE HELP.
TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
DATA: wa_object LIKE hum_object,
      it_object TYPE TABLE OF hum_object.
DATA: wa_v51vp LIKE v51vp,
      it_v51vp TYPE TABLE OF v51vp.
DATA: flag LIKE v51p_select_flags.
DATA: it_venum            TYPE STANDARD TABLE OF hum_venum,
      ef_rcode            LIKE sy-subrc,
      et_vekp             TYPE STANDARD TABLE OF vsep_s_vekp,
      et_vepo             TYPE STANDARD TABLE OF vsep_s_vepo,
      et_vevw             TYPE vsep_t_vevw,
      et_highest_level    TYPE vsep_t_venum,
      et_messages         TYPE huitem_messages_t,
      is_packing_request TYPE vsep_s_pithu,
      es_p_request        TYPE vsep_s_pithu,
      es_item             LIKE vepovb,
      cs_header           LIKE vekpvb,
      ef_number           TYPE vpobjkey,
      et_header           TYPE STANDARD TABLE OF vekpvb,
      et_items            TYPE STANDARD TABLE OF vepovb,
      et_item_serialno    TYPE vsep_t_rserob,
      et_history          TYPE hum_history_t,
      et_highest_levels   TYPE hum_venum_t.
DATA: wa_venum            LIKE hum_venum,
      wa_vepo             TYPE vsep_s_vepo,
      wa_vekp             TYPE vsep_s_vekp,
      wa_items            TYPE vepovb,
      wa_header           TYPE vekpvb.
START-OF-SELECTION.
wa_venum-venum = p_venum.
APPEND wa_venum TO it_venum.
CALL FUNCTION 'HU_GET_HUS'
    EXPORTING
      it_venum          = it_venum
    IMPORTING
      et_header         = et_header
      et_items          = et_items
      et_item_serialno = et_item_serialno
      et_history        = et_history
      et_highest_levels = et_highest_levels
      et_messages       = et_messages
    EXCEPTIONS
      hus_locked        = 1
      no_hu_found       = 2
      fatal_error       = 3
      OTHERS            = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_header INDEX 1 INTO wa_header.
CALL FUNCTION 'V51P_FILL_GT'
    EXPORTING
      it_venum         = it_venum
    IMPORTING
      ef_rcode         = ef_rcode
      et_vekp          = et_vekp
      et_vepo          = et_vepo
      et_vevw          = et_vevw
      et_highest_level = et_highest_level
      et_messages      = et_messages
    EXCEPTIONS
      hu_locked        = 1
      no_hu_found      = 2
      fatal_error      = 3
      OTHERS           = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_vepo INDEX 1 INTO wa_vepo.
READ TABLE et_vekp INDEX 1 INTO wa_vekp.
MOVE-CORRESPONDING wa_vepo TO is_packing_request.
is_packing_request-belnr    = wa_vepo-vbeln.
is_packing_request-quantity = wa_vepo-vemng.
is_packing_request-veanz    = '-1'.
is_packing_request-meins    = wa_vepo-vemeh.
is_packing_request-exidv    = wa_vekp-exidv.
CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
    EXPORTING
      is_packing_request = is_packing_request
    IMPORTING
      ef_rcode           = ef_rcode
      es_p_request       = es_p_request
      es_item            = es_item
    CHANGING
      cs_header          = cs_header
    EXCEPTIONS
      missing_data       = 1
      hu_not_changeable = 2
      not_possible       = 3
      customizing        = 4
      weight             = 5
      volume             = 6
      serial_nr          = 7
      fatal_error        = 8
      OTHERS             = 9.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HU_POST'
    EXPORTING
      if_synchron = 'X'
      if_commit   = 'X'
    IMPORTING
      ef_number   = ef_number.
break nunfx004.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance,
Fernanda

Hi ,
Check this code.
Pack componet HU to Overpack HU. *
    l_packing_req-venum = g_ovrp_venum.                  "Overpack Internal HU
    l_packing_req-exidv = g_ovrp_exidv.                  "Overpack External HU
    l_packing_req-veanz = '1'.                     "PACK Constant
    l_packing_req-sub_hu_venum = l_int_venum.
    l_packing_req-sub_hu_exidv = l_int_exidv.       "Componet External HU
    l_packing_req-velin = '3'.                      "HU Type Constant
    l_packing_req-quantity = '1.000'.
call function 'HU_PACKING_AND_UNPACKING'
      exporting
        is_packing_request = l_packing_req
      exceptions
        missing_data       = 1
        hu_not_changeable = 2
        not_possible       = 3
        customizing        = 4
        weight             = 5
        volume             = 6
        serial_nr          = 7
        fatal_error        = 8
        others             = 9.
    if sy-subrc <> 0.
error
      clear: v_msgv1, v_msgv2, v_msgv3.
      v_msgv1 = text-031.
   PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
      leave to screen sy-dynnr.
    endif.
No Errors --> POST HU
    call function 'HU_POST'
      exporting
        if_synchron = 'X'
        if_commit   = 'X'.
plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
Regards
Mohinder Singh Chauhan

Archiving process for batch and handling unit

Hi Guru,
Need your help in achiving process. I would like to achive batch and handling unit information in SAP. Is it possible that, I can just achive these information without archiving sales order, inbound delivery, outbound delivery and etc document ?
If there are 3 line item in sales order document, only 2 line item are shipped and 1 still open, for this scenario can the batch and handling unit information be archive. Or all the line item for that sales order line must completed then only can be archive.
Pls advise.
Any information will be appreciate.
Rgds,
LH.

unfortunaltey to archive boms you have to archive alle predecessing documents before you can start this one.
go to transaction SARA for object MM_SPSTOCK and click the button for 'Network Graphic'. it will tell you very colourfull what you have to do before attempting to archive boms.
same goes for handling units, object LE_HU. Check in SARA.

Handling units in Shipments cannot be unpacked

Dear All,
In shipments, there are HUs which needs to be unpacked since user wants to delete the related deliveries. When he goes to Shipment change mode and tries to unpack the HUs, it is greyed out in and not able to delete or empty the HUs. System gives a message (green color) "The Handling units cannot be changed". Kindly help me to resolve this issue.
Your efforts regarding this would be appreciated and rewarded.
Regards
Samier Danish

Ok, just to be sure;
1) did you pack in the deliveries? You're not trying to unpack these HU's?
2) is there a user status scheme active?
3) did you pack the deliveries and did you pack these HU's into a new HU in the shipment? And are you now trying to unpack the HU created in the shipment?
4) is the packaging button itself greyed out?
5) what is the status of the HU you're trying to unpack?
MdZ

More than one output for a single line in an sql

Hi There,
I have a table like the following ,
A B
1 5
2 4
I want to output the following,
1-1
1-2
1-3
1-4
1-5
2-2
2-3
2-4
Is it possible to write a single sql statement to do this?
Thanks,
--JJ

Something like this ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.20
satyaki>
satyaki>
satyaki>with jose
2 as
3    (
4      select 1 A, 5 B from dual
5      union all
6      select 2, 4 from dual
7    )
8 select j2.A, j1.B
9 from (
10          select rownum B
11          from jose
12          connect by rownum < B
13        ) j1,
14        jose j2
15 where j1.B <= j2.B
16 order by j2.A,
17          j1.B;
         A          B
         1          1
         1          2
         1          3
         1          4
         1          5
         2          1
         2          2
         2          3
         2          4
9 rows selected.
Elapsed: 00:00:01.06
satyaki>Regards.
Satyaki De.

Pack Handling Units on Shipment

Hi Experts,
We have a requirement to Pack the Bundles (SUB - HU's) onto TRUCKs (HU's) in Shipment.
I have been trying various FM's and also gone through the links with little success. In one of the links, friend Christopher has suggested to use 3 FMs in order to do this.
1. RV_SHIPMENT_VIEW
2. HU_PACKING_AND_UNPACKING
3. HU_POST
I have tried this with some success but not in the way we wanted. Instead of packing BUNDLE - sub HU onto the TRUCK - HU in shipment, it was packing the bundle onto shipment.
Can someone please tell me how to achieve my requirement?
Thanks in advance.
Regards,
Lakshmi Narayana

Please check the following code snippet.
Certain attributes are hardcoded, please ensure that you change it accordingly to suit your needs.
types: VSEP_S_PITHU      TYPE PACKING_ITEM_HU.
types: VSEP_T_OBJKEY     TYPE HUM_OBJECT_T.
types: VSEP_S_OBJKEY     TYPE HUM_OBJECT.
data: l_PACKING_REQUEST type VSEP_S_PITHU.
data: l_VEKPVB          like VEKPVB.
data: l_header51        like HEADER51.
data: l_IT_OBJECTS      TYPE VSEP_T_OBJKEY.
data   ls_objects        TYPE vsep_s_objkey.
data   l_vbplk_a         like vbplk.
Read the packing details (HUs) for the shipment
move 'IEQ' to st_shipment.
move i_shipment to st_shipment-low.
append st_shipment to t_shipment.
CALL FUNCTION 'SD_PACKING_FOR_SHIPMENT'
    TABLES
      SHIPMENT_TAB = t_shipment
      VBPLK_TAB    = t_hu
      VBPLP_TAB    = t_hu_heirarchy
    EXCEPTIONS
      OTHERS       = 3.
IF SY-SUBRC <> 0.
    raise NO_HUS_ON_SHIPMENT.
ENDIF.
Sort table by sortl field to ensure that the order of
entries in the table reflect the true order of items
in the consist
sort t_hu by sortl venum.
Find the top level (consist) HU
read table t_hu
into l_vbplk_a
with key veltp = 'A'.
Pack all lower level HUs into the higher level
loop at t_hu into st_hu
where veltp ne 'A'.
    clear l_header51.
    l_header51-OBJECT = '04'.
    l_header51-OBJKEY = i_shipment.
    l_header51-PLANHU = 'A'.
    l_header51-SPRAS   = sy-langu.
    l_header51-VTWEG   = '04'.
    l_header51-SPART   = '10'.
    l_header51-profile = '0006'.
    clear ls_objects.
    ls_objects-object   = '04'.
    ls_objects-objkey   = i_shipment.
    APPEND ls_objects to L_IT_objects.
    CALL FUNCTION 'V51P_READ_HUS_FOR_TRANSPORT'
      EXPORTING
        IF_LOCK_HU    = 'X'
        IF_FIRST      = 'X'
        IS_HEADER51   = l_header51
        IT_OBJECTS    = l_it_objects
      EXCEPTIONS
        HUS_LOCKED    = 1
        NOTHING_FOUND = 2
        FATAL_ERROR   = 3.
    if sy-subrc ne 0.
      raise hu_cannot_be_locked.
    endif.
    do 2 times.
Do this twice as it is possible that the update of the
delivery has not completed (even though commit and wait)
      CALL FUNCTION 'RV_SHIPMENT_VIEW'
        EXPORTING
          SHIPMENT_NUMBER             = i_shipment
          OPTION_TVTK                 = 'X'
          OPTION_TTDS                 = 'X'
          OPTION_ITEMS                = 'X'
          OPTION_STAWN_READ           = 'X'
          OPTION_SEGMENTS             = 'X'
          OPTION_PARTNERS             = 'X'
          OPTION_MESSAGES             = 'X'
          OPTION_PACKAGE_DIALOG       = 'X'
          OPTION_FLOW                 = 'X'
          OPTION_DELIVERY_LOCK        = 'X'
          OPTION_AUTHORITY_CHECK      = 'X'
          ACTIVITY                    = 'V'
          OPTION_NO_REFRESH           = ' '
          OPTION_IGNORE_MISSING_DELIV = 'X'
        EXCEPTIONS
          NOT_FOUND                   = 1
          NO_AUTHORITY                = 2
          DELIVERY_MISSING            = 3
          DELIVERY_LOCK               = 4
          OTHERS                      = 5.
      if sy-subrc eq 4.
        wait up to 1 seconds.
      else.
        exit.
      endif.
    enddo.
    CASE sy-subrc.
      when 0.
      when 4.
        raise DELIVERY_CANNOT_BE_LOCKED.
      when others.
        raise CANNOT_READ_SHIPMENT.
    endcase.
    clear l_packing_request.
    l_PACKING_REQUEST-VENUM = l_vbplk_a-venum.
    l_PACKING_REQUEST-EXIDV = l_vbplk_a-exidv.
    l_PACKING_REQUEST-VELIN = '3'.
    l_PACKING_REQUEST-SUB_HU_EXIDV = st_hu-exidv.
    l_PACKING_REQUEST-QUANTITY = 1.
    l_PACKING_REQUEST-ALTME = 'EA'.
    l_PACKING_REQUEST-VEANZ = 1.
    CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
      EXPORTING
        IS_PACKING_REQUEST = l_packing_request
      EXCEPTIONS
        OTHERS             = 9.
    case sy-subrc.
      when 0.
      when others.
        message i999(zv) with 'Error while packing - return code' sy-subrc.
        raise ERROR_PACKING.
    endcase.
    CALL FUNCTION 'HU_PACKING_UPDATE'.
    commit work and wait.
endloop.
ENDFUNCTION.

Black output for picture (metafile, Word) pasted from Excel

Hi,
All pictures in the pdf result in black rectangles. The original document is Word and the pictures are pasted from Excel to Word as Picture (Windows or Enhanced Metafile). Word and Excel are 2007 and Acrobat is 9Pro. Any guess how to get the pictures right in the pdf?
Thanks in advance,
Herman

I'm guessing here.
Do not copy and paste; I think the path to the source picture is being lost.
Within Word, Insert the picture from the menu.

For tracking shipping cost document from shipment.

Hi All,
I have the shipment document number ( vt03n) in VBFA table in the field VBELN. I need to track the shipment cost document number ( VI03) using this. Please help.
Thanks in advance.
Regards,
Praveen N
I

Check table VTFA.
Regards,
John.

Need help for multipule handling unit get printed out

Hi ,
I have multipule handling unit in case of issuing the output for selected multipule handling unit using output type . I am getting one handling unit to be printed out . Please can u suggest any configuration is recquired to get selected printed out all the select handling assigned to output type
Any configuration is recquired to get printed out .
process followed .
give DO no for vl02n (tcode) and then pack from the menu we get handling unit need to be selected 3 or 4 handling unit then go to extra's and select output given here output type and save it .Then in nace i got only one handling unit.

You can use the t-code VL74 for printing handling unit output.

Output for a Single Handling Unit from Shipment

Similar Messages

Maybe you are looking for