Output for Quality test certificate

Hi mates
Can anybody help me out in Configuring Output type for Quality test certificate while creating Outbound delivery.
Thanx
regards..,
Karthik

Hi..
Go to QA11 or QA31..
system will ask for Inspection lot.. do the user status(UD completion) wid ststus "A"
and save..
go back and check tab Message type..
hope this will help u...
correct me if i m wrong...
thanks..
mk

Similar Messages

Goods send for quality testing

hi,
sap gurus,
good morning to all,
what type of business process can v identify as the goods will send for LAB TESTING/QUALITY
TESTING and they are excised.
can anybody send the steps for the following.
regards,
balaji.t
09990019711

Hi Balaji
there are two kinds stock 1) internal manifacture 2) extranal stock comming from vendor.
1) if it si internal finished goods it willlbe send it for quality testing after every thing is fine then it will go to un-restricted stock with momennt type 561
2) if it external stock it is comming from vendor.with ref to po MM people they do MIRO and MIGO (invoice verification) then it will go to unresticted stock. otherwise it will send it back to vendor.

Quality Test Certificate Outgoing (Delivery)

Dear QM Gurus,
Here I am having one scenario where I need to print test certificate for delivery considering inspection characteristics of a finished material and semi finished material at different BOM levels.
Ex:
Finished Material : FERT001
SemiFinished Materials : HALB001, HALB002 & HALB003.
Raw Materials: ROH001 and ROH002
Process: FERT001 produced using HALB003 Produced using HALB002 produced using HALB003 Produced using ROH001 and ROH002
At HALB003 we are going to capture some characteristics and FERT001 I will capture some other characteristics, Now at the time of delivery I want to print both(FERT001 and HALB003) inspection characteristics results in Certificate.
Except FERT001 for all other materials batch is maintaining(No batch Characteristics) for tracking purpose.
I tried some standard procedure like assigning both material in quality certificate and all MICs relevant for both materials. Result origin and inspection spec origin as 03 and Material sort no as 2 where i maintained this material in Materials sequence.
With all the above mentioned settings I tried but I con't able to print the characteristic results of HALB003 in test certificate I can able to get only FERT001 Insp Characteristics only.
Please help me in getting it done, it is critical requirement for our client.
Thanks and Regards,
Krishna Mohan.NSL

As Vishal saying in standard fert material must have batch.
Normaly if u want to fetch the characteristics value on certificate then
1. you need to define certificate profile with relevent characteristcis.
2. for Halb and ROH material characterictics relsult and inspection spec origin should be 3
3. related to Halb material and ROH material has to assign in material tab in class characteristics or MIC.
if you done the above setting in your profile correctly you must have to get the details of RR on your certificate.
Thanks & Regards,
Nilesh

Needs maintain Quality testing condition type in order

Hi,
There is a scenario for maintaining the quality testing charges after PGI. in cash sales customer. after they are updating in the invoice. so there is difference in order value and invoice value,
This difference needs to avoid.
This condition type (like ZQTC) needs to indicate the user at the time of sales order processing.
Please help me for configure the same,
Note: this condition type should be maintained only for Quality testing charges applicable for cash sale customer.
Thanks and Best regards,
Muralidharan S
9841381700.

resolved by self

Client creation on XI on development server for Quality

Dear All ,
I have configured scenarios on one of the client in development server . <b>I want to create new client for quality/Testing on the same development server</b> .Can somebody guide us how to create new client on the same server .
Thanks in advance
Regards
Prabhat

My question was meant to determine whether you had any CPU licenses. In retrospect, it doesn't matter.
You cannot use your Production licenses on your Dev system without violating your contractual obligations with SAP. i.e. both system cannot run in parallel using the same license keys.
You might be able to use the quarterly Test licenses that SAP makes available without violating your contract. I am uncertain of the terms of the test licenses.
You should probably talk to your Account Manager on this.

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

RFC Destination for Quality Certificates

We are setting up QM and one step is to save quality certificates from suppliers. The problem is we get error "OA009 Storage system not known" on trans QC51, it seems because we do not have defined the Content Repositiry on trns OAC0.
SAP has predefined values for quality certificates:
ObjectType: BUS2117
Doc. Type: QMICERTPDF
Cont. Rep. ID: D3
Link: TOA01
My problem is that when I try to create content repository D3 in trans OAC0 it has a requiered field: RFC destination, which I assume is where the data will be stored, anyone knows which one should I choose?
Edited by: Carlos Salazar on Apr 16, 2010 8:03 PM
Edited by: Carlos Salazar on Apr 16, 2010 8:04 PM

Match code shows these options (on DEV 030):
Destino RFC
BACK
CALLTP_WindowsNT
CONEXION A QAS
DEV
DOCUMENTATION_HELP
EU_SCRP_TEST
EU_SCRP_WN32
F1_HELP_SERVER
F1_HELP_SERVER_32
F1_HELP_SERVER_40
GFW_ITS_RFC_DEST
IGS_RFC_DEST
LOCAL_EXEC
LOCAL_PRINT
MDX PARSER
MSSQL_CFGCK
MSSQL_CFGCK_REG
NONE
NONE_NU
QAS_DEV_DEV_00
R3_WINDOWS_SERVER
RECORDER
RECORDER_NU
SAP_INTERNET_GATEWAY
SAP_KEN_IOE
SAP_SCHEDULE_16
SAP_SCHEDULE_32
SAP_SSFATAS
SAP_SSFATGUI
SAPBC
SAPFORMS
SAPFTP
SAPFTPA
SAPGUI
SAPGUI_QUEUE
SAPHTTPA
SAPIRCONTROLLER
SAPIRPCFILETRANSFER
SAPJ2EE
SAPNET_RFC
SAPNET_RTCC
SAPOSS
SDCC_OSS
SERVER_EXEC
SLD_NUC
SLD_UC
TMSADM @ DEV.DOMAIN_SOL
TMSADM @ PRD.DOMAIN_SOL
TMSADM @ QAS.DOMAIN_SOL
TMSADM @ SOL.DOMAIN_SOL
TMSSUP @ DEV.DOMAIN_SOL
TMSSUP @ PRD.DOMAIN_SOL
TMSSUP @ QAS.DOMAIN_SOL
TMSSUP @ SOL.DOMAIN_SOL
VFOLDER
WORKFLOW_LOCAL_030

Settings for Quality Certificates generation

Hello All,
I am a new entrant in the forum. I need your help on quality certificates.
What are the settings necessary for generating Quality certificates in SAP?
Sravan

Hi,
For quality Certificate
In material master QM view Should have to assgn the QM Control Key which controls the Certification and also assign the certificate Type.
Create Certificate profile (Tcode QC01),
Here For which Inspection type you want to create the certificate assign the Origin and type of inspection.
Assign the layout set (with ABAP er's help Required form to be created and assign the name here)
By default QM_QCERT_01
After creation of profile assign this profile to material/materialand customer com bi
Regrds
Praveen

Quality Check Certificate

Does cisco offer quality check certificate for ISR routers?

Dear Gajesh,
I was going through your article on Certificates.
In condition type for output detemination(SPRO settings),What is the use of maintaining form,If in VV21 in communication tab i need to mention the form name again.
Also If i maintain it here it doent come as default form name in vv21.
In certificate profile we give the form name again.
Why is same setting done so many times?
Also i tried with a test case and coudnt get output without the following setting
VL02N, "Extras"> "Delivery Output"> header". Enter the output type and save the delivery.
Can u pls guide

Service billing for inspection testing

Hi folks,
My client is a testing laboratory where they receive samples from external company. Tested results are sent back to the customer along with a test certificate and is billed for the testing carried out.
I have two things to clarify
1) how is the sample receipt to be taken
2) How the customer to be billed with respect to the testing done
Stringent requirement. Suggestions are most welcome
Regars,
Sravan

Hi
This is a kind of service. So you can use service scenarios
1) how is the sample receipt to be taken
Make use of Texts at sales order level. Once the lab tests are over user has to fill the report outcome to that respective text in sales order. Create a new output type which will print the required info.
2) How the customer to be billed with respect to the testing done
Categorize the services company is provide to customers and Create service material for those services.
Create sales order for that service material and rest same as standard process maintain price in VK11 Or maintain manually. Once the sales order is complete means your company end user has filled the sales order text, create final invoice and take print.
Produce both the printouts to customer.
Please close one thread.

Test certificate

Hi sap gurus,
My client sends a material from his factory to vendor place and after completion of work, Vendor will send to customer. Before sent to customer he has to send a Test certificate to my ckient factory then Q.A. Dept will give a clearance, then he has to send a material to customer. Can anybody tell me how to address in SAP
Cheers,
Krishna

Hi,
Activate the material for QM with control key which specifies the requirement of Quality Certificate.
Activate enhanded certificate profile in your customizing in Quality Certificate. Also you may opt to select 'No certificate check at GR'.
Then ask your vendor to send the material certificate. Quality personnel will check the material & enter the same in transaction QC51 against the purchase order number.
After the confirmation of certificate receipt from Quality personnel, you nay ask vendor to send material.
Hope this clears your query.
Prashant

Test certificate from vendor

hi experts
I want to mention in purchase order that test certificate is required or not.
one option is to write in text.
but i want to have additional field in PO . how to have additional field ???/

Hi Atul,
Ther is provision in POs item conditions in delivery tag and in stock type field.
If you open it then there is a flag of quality inspection.
While placing the PO if you activate it then it will aloow to make the GRN and it will place such stock in GR blocked stock
The further processing i.e. issue and bill parking will not allowed unless and until you remove the the GR blocked stock for qualty inspection
Atul

Excel Output for Standard Reports using XML Publisher

Hi All,
Customer wants to get Excel Output for the existing Standard/Custom Reports using XML Publisher. I followed the following procedure.
1. Changed the output to XML for Concurrent program ( Trial Balance - Detail )
2. Used the Existing seeded Template
3. Ran the Report using EXCEL as the output.
When I clicked on View Output, I am not able to see the Excel output. I am seeing the HTML tags in the output window. Verified that Viewer Options existed for Excel as follows:
File Format=Excel, Mime Type=application/vnd.ms-excel.
When I ran the report with PDF output. I can see the PDF output.
Ran the HTML output with new Viewer Option ( File Format=HTML, Mime Type=application/vnd.ms-excel) then I can see the output in Browser in the Excel format. I did this test after going through the Metalink Note: Note:316752.1
My question is.. Do I need always choose the HTML ouput in the options window to trigger the Viewer option for HTML. Customer may not like this idea. He would like to choose the Excel Output and see the output in Excel format either in the Browser or Microsoft Excel.
Can someone in this situation before help me out.
Thanks,
V

Questions rephrase:
1. Is the output is same for HTML and Excel options ?
2. Why the output is viewable with HTML option and not with Excel option ?
Customer has XML Publisher Version 5.0.1 and in the process of applying 5.6.1
Thanks,
V

Need a procedure to make minus query as output for 2 tables

Can anybody help me to create a procedure so that I could get minus query of 2 table as a result.
Requirement:
I have two table 1- src_table_list ,2- tgt_table_list both tables have 2 columns : serial_no,table_name and 100 records each. and details mentioned in column "table_name" are actually tables name which present in my testing database.
so I need one procedure which will pick one table_name from src_table_list and one table_name from tgt_table_name each time recursively and provide minus query as a result. as below.
select c1,c2,c3,c4 from table1 --(fetched from src_table_list)
minus
select b1,b2,b3,b4 from table2 --(fetched from tgt_table_list)
Can any body give or help me to create the procedure..as I have to prepare minus query for more than 200 tables and then I need to test them for integration testing..
Edited by: 974253 on Nov 30, 2012 5:39 AM

select 'select '||chr(39)||src_table_list.tblname||chr(39)||','||chr(39)||trg_table_list.tblname||chr(39)||',count(*) from '||' ( select * from '||src_table_list.tblname||'minus select * from '||trg_table_list.tblname||');'
from src_table_list, trg_table_list
WHERE src_table_list.serial_no = tgt_table_list.serial_no
The above statement should give output similar to below code and will list down all the table names in the 2 tables(i.e. above src and trg) -
select 'src_table_list.tbl1','trg_table_list.tbl1',count(*) from
(select col1, col2 from src_table_list.tbl1 minus select col1, col2 from trg_table_list.tbl1 );
select 'src_table_list.tbl2','trg_table_list.tbl2',count(*) from
(select col1, col2 from src_table_list.tbl2 minus select col1, col2 from trg_table_list.tbl2 );
Now atleast you can run these statements as script and get to know what all tables are having count differences.
I might have missed out on some syntax part in above code but hope to have helped you in some way as you will be specific with number of tables to check for differences.

REP-56093: Cached output for job 1058 is no longer valid.

When i run report, this error message showed up.
REP-52251: The output of job ID 1058 requested on Wed May 18 11:18:54 KST 2011 cannot be retrieved.
REP-56093: Cached output for job 1058 is no longer valid.
I tested like below.
When add rownum < 100 condition, the reports run well.
When no rownum condition, the reports failed to run.
Are there anyone to tell me the key point to solve this problem ???
I use weblogic and fussion middleware.
Edited by: backsulee on 2011. 5. 17 오후 7:31

metalink note " REP-56093: Cached Output For Job <###> Is No Longer Valid Running Large Report [ID 305398.1]" maybe does give the answer for you

Output for Quality test certificate

Similar Messages

Maybe you are looking for