Output for scheduling agreement documet

hi sap gurus
i am facing the problem for output ofschduling agreement
what are the settings required for that and what is menupath for this output condition types
i am getting this earror
Message - NEU - logical destination - for local / pos both. Local PO & Scheduling Agreement
please reply me urgent you will get max reward points
thanks and regards
srinivas k.

Hi
You shall maintain the message output condition records in MN07, with message type NEU, selecting the appropriate key combinations.
Enter the details with Transmission medium as "1" and dispatch as "4" for sending immediately.
Select the communication and give the printer in which you want it to print or select LOCAL and select "print immediately and save,
Your document will get this message determination automatically. If u have already created, go to messages and enter the details in communication method tab and further data.
You will be able to print the document immediately while saving
Hope this helps'
Regards,
Sasi

Similar Messages

Output for Schedule Agreement

Hi
I have to use the standard Output neu for Schedule agreement.Kindly suggest on the following
1. If i have to alter the messsage type neu is it necessary to copy the standard to create a ZNEU and proceed?
2. If for an outtype, say suppose for ZNEU, if the document is changed, then i require an new message to be created. For this what configuration needs to be done or whether the message generates automatically.
3. Also we intend to include for every item ,the E>D ,cess,Sales tax etc.. to be printed.I think for this, do i need to copy the standard output NEU and create a new mesage type and proceed
Please reply for all points.
Thanks very much in Advance
Regards
Arvind

Hi Arvind ,
1. It is always better to make a copy of the Standard so that all the relevant tables gets updated properly.
2. In the Message Control under Fine-Tuned Control: Outline Purchase Agreementshould use operation " 2 " for change and set the Mulitple issuing indicator against the access sequence used.
3. The Form need to be modified . Contact ABAPer in this regard.
Regards
Ramesh Ch

IDOC for scheduling agreement

i need to create a Z output type for scheduling agreement(application EV in NACE) which triggers an idoc...Its for the whole agreement and not for each line item. ..i need to know the basic idoc type for scheduling agreement to be assigned in partner profile (like DELFOR for delivery schedule) in WE20..
Edited by: nevinphilip on May 10, 2010 9:30 AM

The DELFOR.DELFOR01 IDoc can be used for delivery scheduling. Is that what you're looking for?

Automatic delivery schedule for Scheduling Agreement

Hi all...........
I like to create automatic delivery schedule both JIT & FRC schedules for Schedule agreement, means system has to suggest the schedule lines.
I created SA and creation profile, when Im trying to generate JIT schedule system showing "Error generating release against scheduling agreement (cause 2)".
Pls let me know wht configuration I hve to do and pls let me know all the steps.
I like to know output determination setting for SA releases also.
regards
Durga Ram

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

Header text not printed for scheduling agreement

Hi All,
I have issue with header text print out for scheduling agreement (SA).
In SA when I am manually writing some note and then taking print out, system is giving me correct output with maual note.
I have one standard text (ST) which I need to be printed in evry SA, so in SPRO I created new head text for vendor and in copying rule for text for SA, I created linkage of SA header text with Vendor head text.
In vendor master, I inserted ST in newly created vendor header text.
So now when ever I create new SA for vendor system will determin header text from vendor master.
Now after creating SA when I check the SA, I am able to my ST in SA, but at the time of print out this ST in not printing.
Please let me know what could be the reson.
Regards,
Sameer

I dont understand about what you mean by expand.
When you a print PO, PO text (header or item) it will check to the configuration setting.
The system didnt care if its adopted from vendor master or info record, or whatever you make in the copying rule.
In your case : you create a standard text then it get copied into PO , then you set the standard text to the PO for print out, example the standard text : word is
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
Then in the PO the text appear will be like below(the same, because it get copied)
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
If you configure it in define text for SA, then it the print out it will also (the same)
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
So what text need to expand?

SAPSCRIPT for Scheduling Agreement

Can anyone tell me , what is the SAP form name for Scheduling Agreement and also the Output type for the same.
Kindly do the needful.
Thanks in advance.
Regards,
Shankar

Is it purchasing SA? use sapscript MEDRUCK and output type NEU.
Form: ENTRY_NEU Program: SAPFM06P
Regards
Sridhar
Message was edited by: Sridhar K

MRP To Generate SCHEDULE LINES for Scheduling Agreement

Hi
I have followed the below steps but still the Schedule lines is not generated for scheduling agreement.
1Maintain MRP views 1,2,3,4 for the material in material mste.(MM01)
2. Maintain Purchase Info Record for the vendor plant & material combination.(ME11)
3. Create Scheduling agreement using ME31L
4. Maintain source list for the material & the scheduling agreement # and Line item set the MRP relevant indicator 2 (Necessary ?) ME01
During Run MRP for the material.the below details entered///
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Schedule lines 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 1 Determination of Basic Dates for Planned
Run MDBT or MD02 but still doesn't create the schedule lines......Anything else missing.
MRP1:
MRP Procedure: PD
MRP Group: 0000 (External Procurement only)
Lot Size: EX (Lot For Lot)
MRP2:
Procurement Type: F
Sched Margin Key: 000
MRP3:
Avilablity chec: 02 (Individual requirement)
MRP: 4
Nil

Raj,
Source List a Mandatory for Scheduling Agreement, if you want to create automatic Scheduling line.
Plz use (2) in MRP RELEVENT tab in ME01 (Source List).
rest of the thing is ok, make sure a material master(MRP 2 VIEW) in that view you have to give a planed delivery days. it is must.
HOPE IT WILL WORK
Regards:
Poision

Exit for role determination via exit for scheduling agreement and contract?

Hi..
I have a requirement to fetch the agents in run-time for PO,PR,SCHEDULE AGREEMENT, CONTRACT..
For PO i am using EXIT : - M06E0005
For PR release i am using EXIT :- M06B0001
By using above 2 exits i am getting the agents at run-time...
Same way i need the EXIT for SCHEDULE AGREEMENT and CONTRACT..
if there is any EXIT for this please share with me..
Regards,
Imtiaz Khan

Hi Imtiaz,
Ideally you should have your agent determination logic in workflow itself instead of determinining them in EXIT.
Can you tell me why you are determining agents in exit and how you are making use of it ?
Also let us know how your workflows are getting trigger for all these documents.
Regards,
Ibrahim

Delivery Schedule for Scheduling Agreement

Hi Gurus,
Can I do GR for scheduling agreement(with delivery schedule) if the GR is earlier than delivery date? What should I do to be able to do so?
Thank you very much

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

Schedule lines for schedule agreement

Hi,
I need get all schedule lines for schedule agreement (all schedule lines = all visible in tab analysis u2013 all lines for all forecast dlv. sched).
I check table VBEP and VBEH and I canu2019t find all items.
Could you help?
Thanks in advance,
E

Hi Manju,
For this you need to set creation indoactor for planning run in SPRO.
The path is spro-MM-CBP-Carry out overall maintenance of plant parameters-Click on maintain-give your plant-click on external procurement under planning run-here you can give your option for the schedule line creation.
Traction code is omi8. Hope this will help you.
Cheers
Ravi

Idoc Message type for Scheduling agreement

Dear Experts,
How to configure to create Idoc for Scheduling agreement (not the releaseed schedule lines) ?
I am trying to use message type ORDERS05 but it is not working.
Will any body guide me preferably step by step process for this ?
Thanks in Advance,
Best Regards,
Raju

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Confirmation Control for Scheduling Agreement

Hello Experts,
I have got situation for subcontracting scheduling agreement where client doesn't need confirmation control. They want to perform GR against scheduling agreement after creating delivery schedule without extra activity(Confirmation).
Process flow is:
1. Create work order(generates purchase requisition for subcontracting activity)(CO01)
2. Create delivery schedule against purchase requisition for scheduling agreement(ME38)
3. Create delivery to supplier through ME2O
4. Confirm Goods receipt(ME38)
5. Goods receipt(MIGO)
I am trying to avoid step 4.
Standard scheduling agreement setup automaticially fetches confirmation control key 0004. If I am disabling it manually, and not performing step 4, system throws message "no GR relevant item in PO"
Can somebody suggest settings to achieve my scenarion
Thanks and Regards
Gyanesh

Hello PavanKumar,
The inbound delivery is one type of confirmation you are receiving from the vendor so I dont think you will be able to create the inbound delivery without confirmation control key.
Hope this helps.
Arif Mansuri
Reward if answre is helpful.

Message type for Scheduling Agreement - Outbound IDoc

Hi All,
I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS. Whether there will be any impact on this.
Appreciate your help.
Regards,
Anbalagan.

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Release strategy for Scheduling Agreement(SA)

Dear Forum,
This issue is with regards to the release strategy for Scheduling Agreement(SA)
Until now release has only been applicable to contracts at our client site. But we now plan to introduce it for SA as well. Such a feature is available in SAP but the problem is that with the given release strategy GR is not allowed until the release is affected. The system allows you to post the delivery schedule.
Now what I want is that after making the SA the system should not allow to make delivery schedule if release is not affected.
We also have MRP run at client site..Kindly suggest the procedure as, how to configure it.Are der any User Exit for the same,if so please discuss..
Warm Regards
Nainesh
SAP ECC 6.0

Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
   Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM    in response to: sathish.kumar           Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...??

Inbound Delivery For Scheduling Agreement Lines using LSMW

Hi,
We need to create inbound deliveries for scheduling agreements. Our scheduling Agreements are too big with 200 lines. But the vendor used to send only few discrete lines in his ASN. Is it possible to create inbound deliveries for the Scheduling agreement using LSMW? Is there any standard BAPI or IDOC available to handle this in LSMW? Has anyone done this before?
Our requirement is as follows.
1. Create Inbound Delivery for few lines of the Scheduling Agreement
2. The delivery quantity of the inbound delivery will be a partial quantity of the Scheduling Agreement
3. Materials are batch managed and the batch number for each inbound delivery item need to be captured.
4. Vendor's ASN Number and its item number need to be captured at inbound delivery header and item level respectively.
Note: Delivery Schedule of the Scheduling Agreement is not used in the above scenario.
If you have any input, it will be really appreciated.
Regards,
SP0526

Hi,
You can give your scheduling agreement number in the field Purchase Order.
If you want select from the list, you can click on PO tree (just under create inbound delivery). There selet document category as "L". You will get the scheduling agreement list.
Regards,
Prabu

Output for scheduling agreement documet

Similar Messages

Maybe you are looking for