Output from fcp to dvd studio 4        sd get bad quality dvd pixelized

2 hour video 740 x output. tape out looks great looks great but dvd does not. pixalized could not see faces clearly. please suggest
bit rate one pass or two. on reg. 4.7 dvd-r.
will use ac3.

Hi:
You can use Bitrate Calculator to check the max bitrate. If you use AC3 192 kbps, for 2 hs you can use 486 kbits/s for your video.
If you want to use a higher bitrate, you must split it in two 4.7 discs or a DL DVD.
Hope that helps !
  Alberto

Similar Messages

  • Finishing From FCP to DVD STUDIO..... should it be really simple????

    I'm trying to find a way to to editing my DVD with surround because i'm more of a logic user
    and i so all my surround editing and everything in logic
    but for some strange reason i'm finding it had to take my project from FCP to DVD studio
    to do all the chapters and menus and all the other things you get on most DVD
    i know iDVD is the easiest way to go
    but its limited abit
    so can anyone give me a tip on how to import or open a FCP project in DVD stuido without exporting FCP project as DV or Movie and importing it into DVD studio
    thanks in advance
    stash

    If you want it to be simple and don't need surround, just export a reference movie of your timeline from FCP and import that into DVDSP.
    A reference movie is quick to export, as long as your timeline is rendered. It also doesn't take up much space, as it's simply a reference to all your render files.
    Once you bring that into DVDSP, it will compress it and you can add your menus from templates, add chapter markers, and burn.
    Those of us who do critical work prefer to use Compressor because it allows us control over every setting of the compression process and we can tailor our compression to the project at hand. But for ease of use, just import that reference movie into DVDSP and burn.
    Also, set DVDSP to encode in the background, not encode on build. That way it will start compressing as soon as you import the file, so it's working while you're working on menus, etc. Otherwise it won't start compressing until you hit burn.

  • Unable to output from FCP to Canon XL1.

    I have an eMac with Final Cut Pro 4.5 HD. I also have a Canon XL1 3 CCD camcorder.
    I have no problem capturing footage from my camcorder to my eMac on FCP. I can also connect my Canon to my VCR and record off my camcorder to my TV, as well as play the tape on my camcorder to watch it on TV.
    However, I cannot output from FCP to my camcorder. The 4 to 6 FireWire is attached to both the camera and the eMac and I checked the Log and Capture feature and FCP does recognize a camera or deck is attached. I've been trying to output it using manual record in which I press record on my camcorder and play the playhead on FCP. As I record, there is no picture on my viewfinder, nor any audio being recorded and when I play it back, I just get this blank blue screen, but the timecode is recorded.
    Am I missing something here?

    ensure the following are set
    View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
    View>Audio Playback>Audio follows video
    View>External Video>All Frames
    If this isn't what you are set to do, you won't be sending video out to your recorder.
    x

  • From FCP to DVD Studio Pro

    When I export from FCP then use compressor to create the mpeg2 file for DVD and then burn a DVD in DVD Studio Pro the video is then hot. I don't know if I'm not seeing it right w/my monitors or where the problem is. Would appreciate any trouble shooting techniques or what steps need to happen to get everything correct.

    I am having the same problem I think - See 'Colour/luminance shift from FCP to output DVDSP Problems' which I posted.
    Has anyone an Idea? It seems to me that FCP is not showing the footage correctly. Or its doing something to the gamma which when once outside of you machine ie DVD's it looks Brighter and burnt out.
    Have you tried looking at your footage in Quicktime Player. Then going to the 'Enable Final Cut Studio color compatibility' tick box in the prefs and turning that off. Does your footage look 'hot' as you describe? (I assume when you say hot you mean brighter). If it does then whatever that button does I want Compressor to do the same to footage I put through it.
    Hope that makes sense to your problem, I hope you have found an answer or directions I could try...

  • Conversion settings from fcp to dvd studio pro?

    i have a seven minute short subject that i need to burn to dvd using dvd studio pro. before i export from fcp, wanted to double check my fcp export settings with anyone who's been there before.
    here's my choices: export with quicktime conversion, under standard video compression settings choose none for compression, select best quality and choose millions of colors. also no compression for audio.
    i've got to burn six of these suckers for festival screeners and require the best possible quality so i'd appreciate someone letting me know if i'm heading the wrong direction. btw... the dvd burn on a file this size without a menu seems pretty straightforward, but if there's a pitfall i'm not seeing please let me know that as well.
    muchas gracias.

    Dear Wolfman51
    From my personal experience, I find it's much more efficient to export using QUICKTIME MOVIE, a dropdown menu will ask you these questions: SETTING, current settings; INCLUDE, audio and video; MARKERS (up to you)
    uncheck MAKE MOVIE SELF-CONTAINED.
    save it where you can find it. It will do a quick export. Open COMPRESSION, drag this file into the COMPRESSION FOLDER, check your settings (MPEG2) and let compressor compress.
    Then drag this MPEG2 into your DVDSP.
    You can skip using compressor, and drag the uncompressed QTIME straight to DVDSP, it will automatically compress. I found DVDSP doesn't compress it cleanly, therefore chose compressor to compress my movies before importing them into DVDSP.
    I hope this helps, I look forward to reading more postings, perhaps I'm going thru too many steps.
    Kchen

  • Undesired cropping from FCP to DVD Studio Pro?

    I start with a QT file exported from FCP 6. The settings are 16:9. The problem is the resulting DVD program I create in DVD Studio Pro plays in regular DVD players with the program-image cropped about 5% at the bottom and 5% at the top. I've tried other settings in DVD Studio Pro, such as using 4:3 or 4:3 pan-and-scan but, obviously, I get warped images (smushed horizontally) or cropped images.
    Any ideas where things are going wrong?
    Shanked

    Are you aware of safe area? If not it sounds like you're seeing the effects of overscan. If you watch the dvd on your computer monitor does it still crop the image? If so at what point are you seeing the cropping? ie does the frame look right in the simulator in dvdsp, how about if you look at the file you've exported from fcp?
    You need to post the fcp capture (clip) settings, sequence settings and the method you're using to export from fcp (ie compressor, qt movie, qt conversion) as well as the encoding settings in dvd sp if you're just doing a qt export from fcp.

  • What's the best compressor setting to export from FCP to DVD Studio Pro?

    I am exporting an 11 minute video from FCP Studio 2 via compressor to go to DVD Studio Pro. It's DV PAL 720 x 576 and I intend the final DVD to be 16:9 so I'll be choosing 16:9 letterbox in DVDStudio Pro.
    As my video is only 11 minutes am I losing quality by selecting Best Quality DVD 90 minutes?
    And is the way I described above the best way to go about it?

    You should try the setting as a start, though there are many tweaks you can do if you do not like the results. One of the biggest tweaks is the frame controls (adds more time but can help.)
    You should send out to a preset for 16:9 (or make your own setting with aspect ratio of 16:9) then flag the track in DVD SP to 16:9 Letterbox
    Some links
    http://dvdstepbystep.com/faqs_7.php
    http://dvdstepbystep.com/faqs_3.php
    And a quick Compressor (2 but same principles for 3) movie here
    http://dvdstepbystep.com/qc.php

  • Exporting from FCP to DVD

    Hey
    Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
    My project is no longer than 5 mins
    1920 x 1080 - 1080i (16:9)
    Field Dominance: None
    frame rate 25
    I have Final Cut Studio latest version.
    I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
    Any advise on what you think will be best would be great.
    Thanks

    Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
    In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
    In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
    Message was edited by: Dynamicworm
    Message was edited by: Dynamicworm

  • How do i take a project from FCP to DVD so it plays on a DVD Player

    Help, i need to export a project from FCP in a format which will play on through a UK DVD player and TV. What format do i export to ?
    I then understand i need to import this into DVD Studio Pro set it up to Loop and then burn to DVD R, is this correct ?
    Help please
    Hillster

    Export QT/Current Settings/Self Contained/Audio and Video.
    Drop it into Compressor and choose the DVD preset that matches the total number of minutes of video and also use dolby2 audio.
    Import into DVD SP.
    Delete the menu in the graphic view. Set the track to first play and loop or end jump to itself.
    Drop the video and audio assets into that track.

  • 5.1 from FCP to DVD

    I have mixed the audio in Vegas, then exported the 5 wav files (L,C,R,LS,RS,LFE). Those files are then added to the timeline in FCP and the video editor cuts the video and audio.
    After that is done, how do you send all the tracks to compressor to create a 5.1 AC3 file?
    thanks,
    ~Jay

    In FCP there is a setting for the sequence to monitor 5.1 if you applied the channel grouping properly then an export from FCP should result in a channel grouped audio track with the quicktime file (reference file) when you put it into Compressor there are preset setting there for 5.1
    TonyTony

  • HD from FCP to DVD Studio Pro...Help!

    Looking for opinions in getting the BEST possible Standard Def DVD from a Final Cut Pro sequence containing heavilly effected HD DVCPro P2 footage.
    My sequences settings are:
    Frame Size: 960 x 720
    Aspect Ratio: HD (960x720)(16x9)
    Pixel Aspect Ratio: HD (960x720)
    Editing Timebase: 23.97
    Compressor: DVCPRO HD 720p60
    Video Processing: Rendering in 8 bit YUV
    I of course have Compressor and DVD Studio Pro 4, but have not gone from my HD sequence to SD DVD yet with quality results. I'm not concerned with time just highest possible quality so that it holds up well on HD televisions.

    I just finished a 15-minute HD 1080i project in FCP that used AJA's DVC PRO HD 1080i 29.97 codec. I tried to make a self-contained QT movie and send it to compressor using the settings you suggested. Unfortunately, it came out with a lot of moraying and the detail around subjects eyes were pixelated.
    Is there another setting you would recommend for going from 1080i to a Standard Def DVD?
    thanks.

  • 16:9 problem from fcp- compressor- dvd studio.

    Using Compressor 1.2.1
    I shot mini-dv(xl-2) in 16:9 mode.
    I tried using the widescreen Compressor preset but when I import the my assets to DVD studio 2.0 the aspect ratio is squished to 4:3. Using the display tab I changed it to 16:9, looks fine. But when i try to simiulate, it doesn't work and there an off black 4:3 box in the middle of the 16:9 simulation box. burning does the same. both do not play.
    My presets are marked for 16:9.
    dvds of the project, burn fine using the best settings of fcp Conversion and DVD studio, but i'm having problems going through Compressor first.
    Any ideas?
    fcp 4.5, compressor 1.2.1, dvd studio 2.0

    fcp 4.5, compressor 1.2.1, dvd studio 2.0
    Are you really using DVD Studio Pro 2.0 There is a 2.0.5 update available. You also want to make certain that you have updated to the recommended Pro App Support package.
    What aspect ratio do you have set in the simulator preferences (4:3 Letterbox, 4:3 Pan & Scan, or 16:9)?
    Also, note the following from the DVD Studio Pro 2.0 help file (PDF):
    "The most common error is to letterbox your 16:9 video assets before bringing them into DVD Studio Pro or QuickTime MPEG encoding systems. Once a 16:9 asset has been letterboxed, it becomes a 4:3 asset with black bars along the top and bottom of the video image. If you flag letterboxed source video as 16:9 video when encoding it, you will have problems when you play it back later."
    That sounds somewhat like the problem you are having. Have you reviewed the "Preparing Assets" section in the DVD SP help file?<small><hr width="75%"><small>If this suggestion helps in any way, a confirmation or acknowledgment would be appreciated, since that would also help others who may be having the same difficulty. Do for others as you would have them help you.<center>Thanks for sharing, Waymen.</center></small>

  • Help: Export format from FCP for DVD Studio

    What settings do I export my 3 minute film so I can use DVD Studio Pro? (What size do I want if I want my film to be wide screen just like a professional DVD movie you buy at your nearest store?)
    Thank You!

    In FCP, go to File->Export->QuickTime Movie. You can choose to make the file self-contained or not. Do NOT recompress all frames. The resulting file will be an exact copy of your Sequence in FCP.
    Use that file in Compressor. Choose the appropriate preset for DVD. Compressor will create an MPEG-2 (.m2v) video file and an AC3 audio file. Use those two files in DVD-SP for authoring.
    -DH

  • Sync Issues and Audio Drop-out from FCP to DVD Studio Pro

    I have edited a piece in FCP 5.1.4 and all audio/video is in perfect sync. I have been using this program for several years with no issues, until now. Upon exporting with compressor and importing into DVD Studio Pro, the audio is out of sync by 15 seconds and after that first 15 seconds there is simply NO audio, period.
    Any ideas? Please send the calvary...tight deadline and the hanging rope is getting shorter and shorter by the minute!
    Thanks

    Could be something got corrupted in DVD SP (preferences). I have had my audio act strangely and playback getting bogged down. Repairing permissions and deleting prefs works for this one for me. Did you do any recent upgrades to the OS or QuickTime?

  • A 6-Hour film Assembly from FCP to DVD. Compression?

    Hello!
    I have a 6-hour assembly of a film that was shot with the Panasonic HVX200 with 35mm film lenses. These are the specs: DVCPRO HD 720p 60; frame size 960x720; 23.98fps; audio rate 48.0 KHz, 16 bit; pixel aspect HD [960x720].
    It was cut with Final Cut Studio 5.1.4.
    I have a Quicktime file of the assembly which is 112GB.
    I need to put it on one or more DVDs (hopefully not more than 3 or 4).
    I have been trying to use Compressor to make it smaller but it's very confusing and my computer (Dual core 2.66 NEW MAC wiith only 1G of ram) takes about 10-15 hours to save the Quicktime file on "DVD: Best Quality 120 minutes, 16/9".
    DVD Studio Pro is extremely confusing to me (I've never used it).
    Can I work on the Quicktime file I have and make it smaller somehow OR should I work on the original FCP file and export a new Quicktime file that I can upload on IDVD and make my dvds easily?
    I'm confused...
    Thanks for your help!
    Dual Core intel Mac Pro   Mac OS X (10.4.8)  

    To look decent, you need to make less than 90 minute files.
    Then take each self contained quicktime files and drop them into Compressor using the 90 minute 16:9 preset and choose the Dolby 2 audio preset.
    iDVD will not do justice to DVCProHD footage from the HVX.
    Spend some time learning DVD SP.
    Our 720/24p DVDs from the HVX200 look fabulous

Maybe you are looking for

  • Problem with Instalation

    I have bought the App Store program Aperture. When you start the program displays an error: You do not have any advice please. =============== Process: Aperture [373] Path: /Applications/Aperture.app/Contents/MacOS/Aperture Identifier: com.apple.Aper

  • Can't load Organizer in Elements 10.

    I can't do it either from the Welcome screen (which displays links to both Organizer and Editor) or from Editor.  From Editor, it says, loading Organizer workspace but doesn't open it.  I get no error message.  I used to have no problems opening/usin

  • Editing song info. doesn't work

    Hi When i try to edit song info. ,I am able to fill the required fields after right clicking and get info. buttons; but once i press ok ; nothin seems to happen. Its as if itunes ignores the change please help

  • What is the normal % per minute charge rate of the iPad (3rd generation)?

    Recently I've been experiencing some issues with the battery on my iPad. Even when plugged in to the charger, the battery goes down if I'm doing something processor intensive, and only charges at a rate of less than 1% per minute while in sleep mode.

  • "Invalid Destination Address" for MMS messages

    I got an HTC One M8 about a month ago, and everything has been working great.  However, the last 2 or 3 days, I haven't been able to send MMS messages.  I know that the numbers are correct, because I have been grabbing them straight from my contacts,