Output Further Data : Send with application own transaction

Hi ,
I have a ungernt issue as..We have an invoice print output processing at different times for same dealer as the despatch time is same i.e Send with application own transaction.(Further data , despatch time is 3 , send with application own transaction)
Ex:
XXXXinvoice; YD00 created on 09/19/2007 21:54:47 Actual processing time: 09/19/2007 21:57:34 diff is 167 sec
YYYY invoice; YD00 created on 10/21/2007 22:08:26 Actual processing time is 10/23/2007 20:18:26 diff is appox 2 days
Can anybody look into this and respond with why it is taking different times for the same dealer and what is this send with application own transaction meant for..
Thanks in advance,
Sastry

'Send with application own transaction' basically means that the message would not ordinarily be processed by the transaction or by RSNAST00 in batch. Instead a user might manually release the output, or it might be released by a custom program. We use this in our organisation to release outputs under certain conditions, conditions that cannot be met within an output requirement. For example, we use a certain Shipment status to release all of it's Delivery outputs.
I would suspect a program is processing the outputs in your system, either directly, or indirectly by changing the NAST-VSZTP to '1' for a subsequent RSNAST00 batch run to pickup. Find out which user processed the output, and if a batch user, see if there are any jobs in SM37 for that user for that timeframe.
Good luck,
Paul.

Similar Messages

EDI output message for Outbound Deliv send with application own transaction

Dear All,
I encountering a problem with the output message "WSOR" via EDI.
What i want:
I would to configure this message output without the Dispatch time " 3: Send with application own transaction".
What is encountering now:
I have done the setting in "VV22" or VV21, with the conbination of Delivery type and Shipping point. and the setting is EDI with dispatch time 3: Send with application own transaction.
But When i use ME2O to create the outbound delivery for subcontractor, the message output "WSOR" process automatically and the dispatch time is 4: Send immediately (When application save).
Can anyone please advice me what are the setting or area that i need to check!!
Thank you very much,
Regards,
Chee Wee

Hi
Try here...
Logistics Execution -> Shipping -> Basic Shipping Functions -> Output Control -> Output Determination -> Maintain Output Determination for Outbound Deliveries
Regards
Eduardo

Output option- Send with application own transaction

Hi Team,
Could anybody explain how exactly the "Output option- Send with application own transaction" works.
This is the third option for the output types for any document(sale order / Delivery/ Shipment).
This option can be given in the Output - > Requested processing -> Dispatch time - option (3) (Send with application own transaction)
It would be better if you can explain with a sample example.
Thanks in advance.
Regards,
Ram.

Hi Naga/Max,
Thanks for your replies.
So if we are using the option 3, i need few clarifications like:
-when exactly the output is being triggered.
-What will decide whether it will be a foreground/background execustion
- If the output is being triggered right afgter we choosing 3 and saving the document , then what is the difference between Sed while savin gthe document option and option 3.
Please let me know
Rg
Ram

Oyput- IDoc- 3 send with application own transaction

Dear All,
How is system generating IDoc when the Despatch time has been set as "3 send with application own transaction" in the output type setup?
because in my system,no idoc is generating.
Kindly provide your views.
Thanks.

Hi,
When the Despatch time has been set as "3 send with application own transaction" in the output type,
It means the IDoc will be processed by an local 'z' program based upon NAST entries.
You have to develop an Z program with help of ABAPer to generate the IDoc based upon table 'NAST' entires.
regards
Vivek.

Output determination settings (send with own transaction )

Hi,
when we configure output type, there is an option of " send data with application own transaction "..... Does it mean that we will not be able to trigger the output manually from the document and rather a program will trigger the output ?
for example, we have configured an output type zsor for delivery. we have defined the condition records based on delivery type and shipping point.
when the delivery is made, the output ZSOR will be determined. but will the output be in yellow stage and the program SD70AV2A (output for deliveries) will trigger the output and make it green (since in config we have used "send with application own transaction " ??
can't we trigger the output manually even if we have used "send with application own transaction "
regds
Pamela

Hi,
Yes output is triggered by program
The message is selected and processed by application specific programs. Processing can take place online or in the background
Kapil

Output Processing. Dispatch Time: 3 ( Application own Transaction)

Hi,
I have created output records for an output type with the dispath time =3 (Application Own Transaction) and Transmission Medium = 8 (Special Function) and provided a processing routine to output type.
The output records are populated in sales orders in "Not Processed" Status. My question when will the output gets processed and changes its status to "Processed" when the Dispatch Time is 3 (Application Own Transaction).

Hello,
In transaction V/30 there is 'Dispatch Time' tab where one option is
'Send with application own transaction', you could create your own
transaction to fulfill your requirements.
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Job_open FM called in output type is ending with dump

Hi All,
I have a job_open FM called in output type is ending with dump, In dump analysis its given as "Statement "COMMIT" is not allowed in this form." and "There is probably an error in the program
"SAPLSYDB".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
Kindly advise me to avoid this.
Thaks in advance.
Joshi

Hi,
This update termination occurs when a DB commit occurs in update task.......and probably job_open FM must hav done the DB commit.....
So issuing the output while saving the transaction is not possible with job_open FM in output program.....
try putting 3 (send with application own transaction) in despatch time of output and issue it manually.....
Cheers,
Jose.

'Send Aplication with Own transaction ' for triggering Output Type

Hi All,
Can anyone let me know how the option 'Send Applicaion with own transaction' for triggering output type works?
Thanks in Advance,
Savitha

just F1 on the Dropdown list box, you get some help from there.

I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices

I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,

Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl

What can I do simply to keep all my previous contents, (own pics, videos, etc.) on my previously authorized iPad on PC, but get a new authorisation and a right syncronization, without data loss with a new iTunes on my new Mac?

Friends,
I already had an iPad(1) and its full contents (not only the purchased items, applications from Apple, but my all own pics, videos, songs etc.) is normally syncronized with an authorized PC (Windows) computer.
Now, I've bought a new MacBook Air computer, and want to sell my PC. But I don't know how to transfer (or syncronize) all of the contents from my previous iTunes on PC to the new one on the Mac.
When I connected my iPad to my new MacBook Air, I promted, if I want to change authorization of my iPad to the MacBook.
But also got a warning, that the new iTunes will delete from my iPad all my previously syncronized items, pics, videos and music, with the previously authorized iTunes on the previous computer, expect the saved pics from the net.
What can I do just like that, simply to keep all my previous contents on my iPad, but have a new authorisation and a right syncronization, without data loss with the new iTunes on my new Mac?
Thanks a lot for your answer.
([email protected])

Here are some instructions that I have posted several times that may be helpful to you as they have been to others. You can simply ignore anything that does not apply or that you have already done.
As Alan stated above - transferring the iTunes library is the best first step. If you can transfer the iTunes library to the Mac, most of this will be unecessary for you to do.
Very Important ....
1. Authorize the computer.
2. Turn off auto sync in iTunes
3. Transfer purchases
The text in italics is from the other thread - non italics are my words.
The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your new computer, start iTunes. Click on iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your computer and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your computer, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your computer. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527
One final note - you may want to leave auto sync turned off - but that is totally up to you. I never did use auto sync.

Oracle Reports with XML output showing data as asterik character

Hello,
I'm trying to create an Oracle report with xml output. Here is the issue I'm having some of the columns in my report are of datatype number. When I run the report and generate xml file the values for those columns(datatype number) are showing as (*) character, other columns are showing fine. But when I run the report as text output then data is fine. I don't understand why this is happening.
The property of column is Column Type - Database Scalar, Datatype - Number , width 0,-127.
Does the width has to do anything with this?
I'm using Report Builder 6.0.8.11.3, DB version 10g.
Can anyone please help me with the issue I'm having.
Thanks

If the links in your example report1 and report2
follow my format stated earlier
http://machine:port/reports/rwservlet/report=reportnam
e.rdf&destype=cache& paramform=htmlcss&server=<YourReportSe
rverName>&userid=scott/tiger@hrdb&desformat=pdf
This is what I believe
>
so http://machine:port/ is the port where
JBoss is running and
This should be the port that the report server is listening on
>
server=<YourReportServerName> is the name of
my oracle report server
so I call the above link in my current application
and the report would show up
Yes
>
that means (correct me if I am wrong) that my reports
would have to be deployed in OracleAS
Yes
>
I have to try all this yet as till this point I was
trying to run Oracle reports deployed in JBoss...
This may be possible, I am not sure.
>
Oracle J2EE Thin Client?
I am not sure what this is used for in your setup.

Can we enhance the Sender SOAP Adapter with our own modules?

Hi All,
Can we enhance the Sender SOAP Adapter with our own modules on the Module Tab Page in the Module Processor?
I believe the answer is no. However, whatever may be the answer, I would like to know that is there any specific reason for that.
Please help me in this regard.
Thanks,
Yogi.

Hi,
I think, we are mentioning the URL of the adapter channel directly in the configuration. SO there is no place we can customize this flow..just a thought
Because in the file adapter etc, After Adapter Engine picks up the data and before it goes into integration engine module is processed..
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
Rgds,
Moorthy

Query with SOST/ SOSB Transaction re. Sender is Releaser not Creater of PO

Hi
We have a query with SOST/ SOSB transaction.
It relates to Purchase orders and Release strategy
The name appearing on SOST / SOSB is the person who has 'released the Purchase order' and not the 'actual creater of the purchase order'
This is causing a problem as users who have created orders, cannot trace their own Purchase orders via SOSB transaction to see whether they have been sent correctly or any errors have occurred
Is there any way to resolve this problem ???
Many thanks
Tony

Hi Jurgen
We have implemented this note
It works for Released FAXES, but for released EMAILED ORDERS, it is still showing the sender as the person who has released the order
Have you come across the same thing ???
Cheers
Tony

IPAD restores applications but not data or files associated with applications

1) Today Itunes prompted me to update the OS on the IPAD.
2) It warned me to back up IPAD before I did. I did
3) I updated software.
4) It returned with an error saying it could not install software and I must restore to facotry settings
5) I resotored to factory settings
6) After that I attempted to restore contents of my IPAD from Itunes on my Windows 7 machine.
7) It restored only music but no applications and no other information
8) I spent all day on the phone with Apple Support who managed to get the applications restored by going through one by one and syncing.
9) It took a few hours
10) After I finished I noticed that files/documents associated with various applications like Kindle, Goodreader, Penultimate Notes were missing on the IPAD.
11) I have made a few phone calls to Apple and thy claim the following: "Apple is not responsible for restoring files or data associated with any applications, only the application itself. It is your responsibility to contact the application developer to get your files restored." This sounds patently absurd to me. I spent half an hour explaining the absurdity of this claim to the Apple representatives but they are firm and non-wavering in this opinion. One even claimed that restoring does not restore applications which of course is not correct.
12) I gave them the example of MS Word on MacBook Pro. If I save/back up on another machine and then restore back to the original machine I would expect to be able to see the Word files I had created and saved. That in particular the failure to view them would not be Microsoft's responsibility but Apple's. They disagreed saying it would be between me and Microsoft and the Apple devices had nothign to do with saving or successful restoring.
13) So I have lost all e-books purchased on Kindle, plus all documents saved on Goodreader application, notebooks on Penultimate applications, and my children’s drawings on their drawing applications. Apple Support say I should contact each application vendor to try and recover the missing data. They refuse to tell me how to get it from ITUNES backup stored on my Windows 7 machine as they say it will not be there.
They have asked me to write to
Apple Customer Support,
Holly Hill,
Cork,
Ireland
quoting case number 319718819.

Did you try restoring from a backup of the iPad? If you have a backup with all of your app data and files, that should restore all of that content to the device.
No - restoring does not restore applications. You have to either sync the applications back from iTunes on your computer, or you can download them again, BUT ... All of your data, files and device settings are stored in your backup. Do you have a backup in iTunes .... Edit>Preferences>Devices - that should show you all of your iDevice backups.

I currently use a iMac OS X 10.6.8 and I cannot open iPhoto. Every time I click on iPhoto the coloured wheel comes up and lets me go no further, leaving me with no other option but to force quit the application. HELP!!

i currently use a iMac OS X 10.6.8 and I cannot open iPhoto. Every time I click on iPhoto the coloured wheel comes up and lets me go no further, leaving me with no other option but to force quit the application.
it is showing all my existing photos but will not let me click on any of them, nor will it allow me to import any new photos into iPhoto.
I am really worried that I cannot access all of my photos and even more worried as I need to back them up!!
HELP!!

Try repair the Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Output Further Data : Send with application own transaction

Similar Messages

Maybe you are looking for