Output in Customer Language for Service Dispatch Note Smart form

We have upgraded from ECC 5.0 to ECC 6.0.
After the upgrade we are facing an issue in some of our Service related smart forms.
The version of the driver program is same in both the systems and the smart form is also same.
The customer's language is maintained in Customer Master data.
In the un-upgraded system, the forms were printed in the Customer language according to what is maintained in the customer master data.
But after the upgrade, in the new system, the form is being printed in English as opposed to the Customer language in the older system.
As I have already mentioned above, in both the systems, the driver program, smart form and Customer Language in the customer master data are similar.
Kindly suggest me the solution if anyone has faced a similar problem.

Hi, Actually I have checked in debugging and have come to know that during the upgrade, when I have downloaded the form from ECC 5.0 and uploaded it to ECC6.0, the Language option in the general attributes tab of the text modules is blank and hence the form is displayed in English only.
Is there any way that I can get the smartform uploaded as it is in the earlier system?

Similar Messages

  • Can we get a output in different languages for the same configuration

    Hi All,
    Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
    They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
    language.
    Thanks in Advance.
    Rajesh

    A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
    To maintain the translations:
    Go to transaction SE63 in R/3.
    Go to menu Translation->R/3 Enterprise->Other Long Texts
    Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
    Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
    Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
    To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
    Madhavi

  • Driver program for GI(goods issue) smart form output type WA01

    Hi,
    i have designed one smart form for GI o/p type WA01 for Tcode MIGO ,but could get any standard driver program becoz in our server the standard program is for the script and not smart form.can anybody help me in finding the standard driver program for trigerring the smart form.

    Hi,
    Try prog SAPM07DR.
    Paras

  • Output determination (print out) for service entry sheet

    All SAP Gurus,
    What are the steps involved in determining the output (print out) for service entry sheet?
    Regards,

    Hai,
    Goto NACE select the Application ES, out type NEU and maintain the program SAPFM11, Formroutine ENTRY_NEW, form ML_SERVICE_ENTRY aganist medium printout and maintain the condition records for printout to VN.
    take print in ML83
    Regards,
    eswaramanu...
    Edited by: eswar manu on Oct 21, 2008 8:37 AM

  • Custom palette for vi's not under LabVIEW

    i've created a very nice custom palette for our vi's. i've created dir.mnu files for each directory. everything is ok if the user installs the vi's under instr.lib.
    however, our installer has the option of installing them some place. if the the vi's/mnu files are not installed under the LabVIEW directories, our vi's don't show up on the palette.
    is there any way of telling LabVIEW where these files are so they show up?

    TCPlomp wrote:
    But you will lose the possibility to install in a custom location.
    Ton
    This is true. However what JKI Package Manager will do for you is to automate and manage the process of adding the VIs to the LabVIEW directories. The source code itself can be saved in an external source code control system and the development can take in wahtever directory you would like. The deployed versions/packages would be added to the NI directories. Is there a particular reason the files should be stored in a custom directory?
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Custom language for particular song's title

    Hi,
    I really like VoiceOver feature that reads a title of currently played song when you'll press remote button for a while, but it's not perfect.
    My music collection consists of English, Polish, French and few Chinese songs and voice over tries to read it always "in English" (UI language). Only exception are Chinese songs that are being read by different voice in proper Chinese.
    How can I set proper language for particular song?
    In Nano 5G VoiceOver was generated by iTunes and everyone could define language for particular song, but 6G seems to synthesize speech on iPod, which is not an issue itself.
    Issue is that I can't find a way to define language for each song separately.

    Right click on the track in itunes and select get info. Then select "Options". On that screen you will see an entry for Language. It is most likely set to "Automatic" just select the language you prefer and you are good to go.
    i

  • Custom language for xcode

    Hi,
    Is there a relatively easy way to add a custom language to xcode?  (templates, syntax highlighting, etc.)
    I often work in "R", a statistical programming language and would love to use xcode to write my code.
    Thanks!

    noah977 wrote:
    XCode must have something similar.  Finiding it and deciphering the file format is the tricky part.
    Finding and deciphering isn't all that difficult. The files are here:
    /Developer/Library/PrivateFrameworks/DVTFoundation.framework/Versions/A/Resource s/
    /Developer/Library/PrivateFrameworks/XcodeEdit.framework/Versions/A/Resources/
    How to get Xcode to recognize a new language is another story. I have tried to inspire the FORTRAN people to do that since they seem very upset that FORTRAN doesn't have syntax coloring in Xcode4. There is a "Fortran.xclangspec" file in there, but I wasn't able to get Xcode to use it. I admit that I didn't try that hard. If you could figure out how to get FORTRAN syntax highlighting to work, the FORTRAN programmers would really appreciate it, and you could probably hack-in R support as well. Of course, it may not be possible at all, so don't get too excited.
    PS: Make sure to have good backups before hacking on Xcode internals.

  • Create Custom Languages for DVD

    Hi... We are creating complex DVD's which use multiple Video and Audio angles. Audio angles give you the option of selecting a language for each track. My question: Is there a way to create a custom language Name... so instead of English, we call it Full Mix Audio - or something like that? I am doubtful about this, but just had top pose the question.
    Thanks
    Barry

    If you mean changing the options in the pulldown for the audio, nope. For alternate audio I usually name the AC3s with names that are easy to see in the timeline (English, Spanish etc.)

  • Specifiying Language for Document Properties if PDF Form

    In order for a pdf to be 508 compliant it's language must be specified. I've created a form and for the life of me can't figure out how to specify the language for this document such that Adobe Reader knows it's english.  In a pdf NOT created using lifecyle this would be easy. simply go to file > properties> advanced > Language > english. but in pdf forms that section of the properties is greyed out. I tried adding it to the xml like this:<br /> <text name="Language">English</text> in the <desc> tag. Please if you have ANY suggestions they'd be much appreciated.

    I wonder if you have seen the form being filled, or a screen shot, so can confirm that Adobe Reader is the app when it is filled? (And not Adobe Reader Touch or a browser or Microsoft Reader or any other app). The reason for asking is that many users (not unreasonably but wrongly) assume that once Adobe Reader is installed it is bound to be used.

  • One-Time Customer or Vendor Address Printing in Smart Forms

    Hi friends,
    I am using the Address Node in Smart Forms to print the Addresses in Tax Invoice Printing. How to get the address details for the One-Time Customers which is stored in the BSEC table using the same Address Function.
    (We can directly get the address details from BSEC and display it by using a separate Text Node. But the address formatting according to the recipient country postal standards will be handled only by Address Function in Smart Forms right)
    Regards,
    Riaz.

    Hi friends,
    I am using the Address Node in Smart Forms to print the Addresses in Tax Invoice Printing. How to get the address details for the One-Time Customers which is stored in the BSEC table using the same Address Function.
    (We can directly get the address details from BSEC and display it by using a separate Text Node. But the address formatting according to the recipient country postal standards will be handled only by Address Function in Smart Forms right)
    Regards,
    Riaz.

  • Inbox Search - status for service request not updated

    Hi,
    In inbox search, the status change for a service request does not reflect until the user log offs or opens the service request in edit mode. PFB the steps followed. (Two users are monitoring the service request but is being processed only by one)
    Web UI window 1(User 1): I open the inbox search result page. Service requests are displayed with the status field
    Web UI window 2(User 2): In a separate window, the service request is approved by changing the status of the service request to Approved.
    Web UI window 1(User 1): In the inbox result screen, i click on search for the same search criteria, but still the old status of the service request(updated in window 2) is displayed.
    Observation:
    1. If I open the service request, the service request still has the old status. If i click on edit, the new status is displayed. If i click on Back button (without clicking on edit), the new status is refelected for the service request in the inbox result page now.
    2. If I log off and again open the inbox result, the new status of the service request is reflected.
    3. The status of the service request is updated in the database immediately user 2 changes the status.
    There is no enhancement done for the inbox search. The behavior is for standard inbox result.
    Please provide any pointers to resolve this issue.
    Regards,
    Radhika
    Edited by: Radhika Chuttani on Jan 5, 2011 7:13 AM

    Radhika,
    This is standard behavior in the SAP inbox. The reason is that SAP buffers search results in the Inbox in order to improve performance. So even though you hit "search" again, SAP does not update the search results because this search has already been executed in this session. Clicking "End" or logging off refreshes the buffer.
    SAP released a note to update the "Responsible Employee" in the Inbox without requiring the user to log off. You can see their explanation and the solution here:
    https://service.sap.com/sap/support/notes/1465966
    If you want to enable inbox refresh every time a search is executed, you will probably have to do custom coding. My guess is that you may be able to leverage the CRM_IC_INBOX_BADI. Let me know if this much info is enough or if you want further details on how to technically achieve this.
    Rahul

  • Language for Service Map of business packages

    Hello All,
    I am using service map for Recruiter business package. In the SAP delivered contents the description for the workset/pages ect. which appears over the service map is specifed in french language.
    Now when the end users are accessing the service map, the text appears in french only and NOT converted to english.
    Is there any configuration needed so that the service map descriptions for the links changes according to the user language settings.
    Currently all the users in my landscape are having english as the language set in the UME.
    Regards
    Deb

    Hello,
    Any suggestion from anyone..
    Regards
    Deb

  • Account assignment for service item not copied from PR in PO

    Hi,
    We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
    1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
    2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
    Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
    Please let me know if someone has faced a similar issue
    Thanks,
    Lakshmi

    Hi,
    Please check first if notes 1085214 and 1102653   
    could solve the issue. 
    Regards,
    Edit

  • Customer exit for calweek is not working

    Hi,
    I have written a customer exit to derive calweek from a calday. But its not displaying the correct value.
    Can u please let me know if there is any error in the code.  The return value for calweek is a single value.
    CASE I_VNAM.
    WHEN 'zfclweek'.
    DATA : zday like sy-datum.
    IF I_STEP = 2.
          LOOP AT I_T_VAR_RANGE INTO L_S_VAR
          WHERE VNAM = 'ZFCLDAY'. ((ZFCLDAY  is also a customer exit to derive date and its working fine )
    ENDLOOP.
            zday = L_S_VAR-LOW .
            zday = zday + 1.  ( i need week of the next day of ZFCLDAY )
    CALL FUNCTION 'DATE_GET_WEEK'
            EXPORTING
              DATE               = zday
           IMPORTING
              WEEK               = xweek
          EXCEPTIONS
           DATE_INVALID       = 1
    OTHERS             = 2
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
          l_s_range-low  = xweek.
          l_s_range-sign = 'I'.
          l_s_range-opt  = 'EQ'.
          append l_s_range to e_t_range.
    exit.
        endif.
        clear l_s_range.
        clear zday.
        clear xweek.
    endcase.

    Hi,
      I have changed my code as follows. But when i run the report its showing, "variable contains invalid values :
    please do me the needful.
    CASE I_VNAM.
    WHEN 'zfcweek'.   " it is a customer exit variable on calweek
    IF I_STEP = 2.
    LOOP AT I_T_VAR_RANGE INTO L_S_VAR
    WHERE VNAM = '0fper'.    " curent fiscal period
    endloop.
    YEAR = L_S_VAR-LOW+0(4) .
            PER = L_S_VAR-LOW+4(3).
            IF per = 01.
                 per = 12.
                 year = year - 1.
             else.
            PER = PER - 1.
            endif.
            CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'   " need to calculate first day of last fiscal period
              EXPORTING
                I_GJAHR              =  YEAR
                I_PERIV              = 'Z1'
                I_POPER              = PER
      I_MONMIT             = 00
             IMPORTING
               E_DATE               =   FDAY.
    EXCEPTIONS
      INPUT_FALSE          = 1
      T009_NOTFOUND        = 2
      T009B_NOTFOUND       = 3
      OTHERS               = 4
            IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            ENDIF.
            CALL FUNCTION 'DATE_GET_WEEK'                  " to calculate the calweek of the first day of last fiscal period
            EXPORTING
              DATE               = FDAY
           IMPORTING
              WEEK               = xweek
           EXCEPTIONS
             DATE_INVALID       = 1
    OTHERS             = 2
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
          l_s_range-low  = xweek .
          l_s_range-sign = 'I'.
          l_s_range-opt  = 'EQ'.
          append l_s_range to e_t_range.
        endif.
        clear l_s_range.
        clear year.
        clear fday.
        clear per.
    endcase.

  • Commitment value for service PR not appearing in 12ksta report

    We have two types of service PR-- COS & CCV. Although the PR is not deleted, its Deletion indicator in the COOI table in the COS PR is set automatically while same Deletion indicator is not set in the EBAN table.  As a result ZERO Value is appearing in the WGHBTR, WTGBTR,WKGBTR,WOGBTR of the COOI table and zero value in the 12KSTA report. Why this difference of the Deletion indicator in the two tables for the same PR ?
    With the similar configuration, there is no problem with the CCV PR .
    How do I remove the Deletion indicator from the COOI table for the COS PR ?
    Please help.
    SM Hussain

    Dear Saurav
    We checked thru OKKP,CUNI,RKACOR04,RAKANBU01, CJEN. CJBN and including your suggested notes like 152571,47992, 671563, 167350 etc with no results.
    We are wondering how Deletion indicator is set in COOI table when the PR is not actually deleted, if you can help us to throw some light on this aspect.
    With regards
    SM Hussain

Maybe you are looking for