Output in graphic card

hi guys !
this is my first time in this forum so be gentle....
my question is how i know on witch port (trough command line) the video output is going. this is because i want to enable the double screen feature on my server (ultra25 sparc) so when i clic the screen to switch between screens this feature should work. in adittion i would like to know the way to enable this feature too.
i hope you can help me.

Hello @melionh ,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with your HP Compaq Pro 6300 Business PC displaying correctly on 4 monitors. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

No audio from hdmi output from graphics card

hello, i have a ms-7191 motherboard that has on board graphics, i installed a visiontec ATI 4350 card so i can output the a/v to my vizio 46" TV using one of the hdmi ports. , the video works but no audio. tried to update the drivers from msi-no help, tried to update the graphics card drivers from visiontec (added the hd audio driver)-no help. tried updating the realtek driver-no help. tried swapping hdmi ports on the TV-no help. i know that i'm not the first to not be able to do this and i have searched for the answer, but i out of ideas, is it possible the problem is that it has a onboard graphics on the board? what should i do now?
Joel

This board came with a spidif bracket-installed into the pci e connector, maybe i am missing something here, is it that is there is no audio connector to the graphics card, so there will be no sound from the hdmi connector? if so how does one get a card to work with the hdmi for both A/V? i thought this card will be able to access the needed info, maybe not then, and if that is the case, then, i don't understand why we have graphics cards with the hdmi interface if it is not useable. i should be able to get by just fine with a dvi out to the tv and add a audio out ( but this tv doesn't have a dvi port ,just the vga-crap. well i do have the s video port-it ani't all that either,,please shed more guys...
Joel

No DVI output with T420 on integrated graphics card and Mini Dock Series 3

Because of some application problems I have to set my new T420 to only use the integrated graphics card (disabling the NVidia Optimus feature). In this configuration I seem to be unable to use the DVI port on the Mini Dock Series 3, there is simply no signal and Windows reports that no monitor could be found. The VGA output works but the picture quality is quite bad.
Is this a known design limitation or do I deal with a driver issue?
Thanks
Dan

Yes, that works but there is the drawback of battery life. In the course of the day I often undock the laptop to go to meetings and using the discreet graphics card uses a lot more power and significantly reduces the time i can work without power. I would have to restart the laptop and change the setting in the BIOS after I undock, which is just not practical. For what I do I don't need the graphics power of the discreet card.

ASUS EAH5450 silent graphics card to my Pavilion m7210 desktop but get no audio via HDMI output.

I have installed an ASUS EAH5450 silent graphics card to my Pavilion m7210 desktop but get no audio via HDMI output.I have 2 high Definition Audio Controllers in Device Manager, One has an exclamation mark with message
" This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
You need to restart your computer before the changes you made to this device will take effect."
What do i need to do to get this to work ?
Thanks

Hi,
Welcome to the HP Forum!
kommy wrote:
I have installed an ASUS EAH5450 silent graphics card to my Pavilion m7210 desktop but get no audio via HDMI output.I have 2 high Definition Audio Controllers in Device Manager, One has an exclamation mark with message
" This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
You need to restart your computer before the changes you made to this device will take effect."
What do i need to do to get this to work ?
Thanks
The other HD Audio device is likely to be the Realtek ALC880 8-channel High Definition onboard sound. This is a bit of a decision point. If you plan on always using the AMD High definition Audio as your default ouput through an HD TV with HDMI out, then you can disable the Realtek HD audio device. Once that is done then restart the PC. Go to the Control panel and select sound, now sellect the AMD HDMI out and right-click and select it as the default. There should now be a green checkmark next to it. Now you can select Configure to test it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Cannot detect outputs on dual graphic card configuration

Hi,
I have a Dell Precision M6800 which has these graphic cards:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Saturn XT [FirePro M6100]
My ATI graphic card is supported by the xf86-video-ati driver based on http://www.x.org/wiki/RadeonFeature/ .
Since I have multiple cards, I followed the instructions of https://wiki.archlinux.org/index.php/PRIME and I have
DRI_PRIME=1 glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Gallium 0.4 on AMD BONAIRE
But when I plug my screen using my laptop display port, I don't see it in xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
1920x1080 60.01*+
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA2 disconnected (normal left inverted right x axis y axis)
DP4 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If I plug this screen on the VGA output, it is detected but the maximum resolution allowed by xrandr is 1920x1080 and my screen is a 2560x1080 so the image is stretched .
My guess is that xrandr sees only the output of my intel card, how can I have it see the outputs supported by my ATI card?
I also guess that my radeon card is not powered up, because cat /sys/kernel/debug/dri/0/radeon_pm_info gives me.
PX asic powered off
I tried DRI_PRIME=1 glxgears and that made me crash my X server with a segfault
[ 554.701] (EE)
[ 554.701] (EE) Backtrace:
[ 554.701] (EE) 0: /usr/bin/X (xorg_backtrace+0x56) [0x58f186]
[ 554.701] (EE) 1: /usr/bin/X (0x400000+0x192fc9) [0x592fc9]
[ 554.701] (EE) 2: /usr/lib/libpthread.so.0 (0x7fb2738f1000+0xf4b0) [0x7fb2739004b0]
[ 554.701] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7fb26d165000+0x1034a8) [0x7fb26d2684a8]
[ 554.701] (EE) 4: /usr/bin/X (0x400000+0x15ea73) [0x55ea73]
[ 554.701] (EE) 5: /usr/bin/X (0x400000+0x15f843) [0x55f843]
[ 554.701] (EE) 6: /usr/bin/X (DRI2GetBuffersWithFormat+0xb) [0x55fc8b]
[ 554.701] (EE) 7: /usr/bin/X (0x400000+0x16172b) [0x56172b]
[ 554.701] (EE) 8: /usr/bin/X (0x400000+0x36b2f) [0x436b2f]
[ 554.701] (EE) 9: /usr/bin/X (0x400000+0x3ad16) [0x43ad16]
[ 554.701] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fb27255e000]
[ 554.701] (EE) 11: /usr/bin/X (0x400000+0x250fe) [0x4250fe]
[ 554.701] (EE)
Its a bad sign, but I'm fine if we find a workaround to only use the radeon card. What I can read from the Xorg log files before this crash is the following:
[ 545.834] (II) RADEON(G0): Printing probed modes for output DisplayPort-1-0
[ 545.834] (II) RADEON(G0): Modeline "2560x1080"x60.0 185.58 2560 2624 2688 2784 1080 1083 1093 1111 +hsync -vsync (66.7 kHz eP)
So my radeon detects this mode, I just don't see it in xrandr and don't know how to use it. I tried DRI_PRIME=1 xrandr but saw no difference with a standard xrandr.
Additional information:
dmesg|grep radeon gives me
dmesg|grep radeon
[ 5.097162] [drm] radeon kernel modesetting enabled.
[ 5.118130] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 10.764770] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 10.764772] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 10.764852] [drm] radeon: 2048M of VRAM memory ready
[ 10.764853] [drm] radeon: 1024M of GTT memory ready.
[ 10.766910] [drm] radeon/BONAIRE_mc2.bin: 31792 bytes
[ 10.774998] [drm] radeon: dpm initialized
[ 10.782479] radeon 0000:01:00.0: WB enabled
[ 10.782490] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8807ff9e9c00
[ 10.782491] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8807ff9e9c04
[ 10.782492] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8807ff9e9c08
[ 10.782493] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8807ff9e9c0c
[ 10.782494] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8807ff9e9c10
[ 10.782874] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc9000a336c98
[ 10.783472] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff8807ff9e9c18
[ 10.783473] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff8807ff9e9c1c
[ 10.783487] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 10.783496] radeon 0000:01:00.0: radeon: using MSI.
[ 10.783516] [drm] radeon: irq initialized.
[ 11.056307] radeon 0000:01:00.0: No connectors reported connected with modes
[ 11.057358] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 11.057360] radeon 0000:01:00.0: registered panic notifier
[ 11.058383] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
Anyone knows how to be able to use this new screen with my radeon card?
Thanks in advance!
Last edited by jolivier (2014-07-02 16:02:01)

Ok I found a solution by changing my Xorg configuration and added my radeon card (although the wiki states that is should be useless)
Section "Device"
Identifier "Radeon"
Driver "radeon"
BusId "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "DisplayPort-1"
EndSection
Section "Monitor"
Identifier "DisplayPort-2"
EndSection
Section "Monitor"
Identifier "eDP1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Radeon"
Monitor "DisplayPort-2"
SubSection "Display"
Depth 24
Modes "2560x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Radeon"
Monitor "DisplayPort-1"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Intel"
Monitor "eDP1"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
EndSection
(I plugged two external screens to my DirectPort ports).
This works but I then have two different screens (:0.0 and :0.1) and the intel drivers keeps on segfaulting when I use them together or when I try xinerama. So I disabled my intel monitor and screen and everything is fine except the fact that I cannot use my laptop screen with my radeon card so I am left with only two screens out of 3 but I will investigate more this issue deeper later on.

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?
Thanks

Thanks, but are these are silent?
Why do they cost over 10 x what seems available for PC?
Is it not possible to flash the cards for mac?
Something similar to a ASUS Geforce 8400GS PCI-E 2.0 512 MB DDR2 Graphics Card EN8400GS Silent/P/512M?

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
Thanks,
Kevin

I recommend you install nothing older than the Apple-firware 5770, about US$250.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

No sound output on installing a hdmi support graphics card on HP Compaq dc5800 Small Form Factor

when i inserted a HDMI support graphics card on g-force nvidia on my HP Compaq dc5800 Small Form Factor no audio output was availabe i need a support for this problem

You will have to switch the sound Playback from Speakers to the Digital Audio output.
Disconnect the speakers from the default output at the rear of your PC. Sound will be output through the HDMI cable to the device it is connected to if the video device has HDMI sound capability. If you have it connected to an HDTV it should not be an issue. All you will have to do is use the TV's menu to accept the computer input instead of cable.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Second Graphics Card for HDTV Output + HDV Live Preview

Hi guys,
I have a few questions about hardware and Premiere Pro CS5. I am using Windows 7 x64 with a Dual DVI nVidia GeForce 7950GT which is outputting to two DVI LCD monitors. I want to install a second graphics card so I can look at the main preview window in Premiere on my HD LCD TV and would like to know what the best plan of attack is. Also, I want to be able to preview my HDV captures on my HDTV as relying on the 2.5" LCD on my Sony HVR is not eye-friendly!
I am thinking about either selling the 7950GT and buying a GeForce 470GTX which has 2 dvi and 1 mini-hdmi, or, keeping the 7950 and buying a cheapish 2nd graphics card to just use for the HDTV. What do you guys think is the best option?
This is the graphics card I am thinking of getting ( http://www.asus.com/product.aspx?P_ID=hs87bcOLPd9irXRk&templete=2 ) an ASUS ENGTX470 / 2DI / 1280 MD5, my server can just handle it's power requirements, but I am happy to upgrade the power supply if this card will ouput to 2 DVI monitors and also to a HD TV with a mini-HDMI to HDMI adapter. An Antec 1000w power supply is only about $225!
Or, I can take the cheap option and get an NVIDIA Quadro FX 580 by Leadtek( http://www.leadtek.com/eng/workstation_graphics/overview.asp?lineid=2&pronameid=491&check= f ) which is a cheapy with 2 HDMI and 1 DVI. I guess there are other PCI-X graphics cards out there to choose from which are probably fine, but it would be awesome to know what some of you guys are using.
Surely there are others out there that already have a dual monitor setup with a third LCD TV for previewing?
Anyhelp would be much appreciated!

@Harm: Thanks for that, I thought a card with three outputs would be too good to be true. I think I will buy a much cheaper 2nd PCI-X graphics card and just use its HDMI output for the HDTV. We will be doing a complete overhaul of this machine sometime in the future and I will buy an awesome graphics card with power supply to boot then.
@J-MS: Currently we are moving away from a Matrox Axio HD as their support for Windows 7 and CS5 has been lackluster, and I don't reward companies that provide zero or no support with future business. I would rather be free of a third-parties proprietary codecs, plugin and decoders.
@Thrill: Thanks for the link to that post, I read through it and it looks like I need to get a second card that is the same make as the existing card (ie. nVidia), which is what Harm was saying. When I capture from the tape deck, the capture preview window in Premiere goes blue and says in 5 different languages that the preview is going to show on the input device, or words to that effect. I am therefore looking at a 2.5" lcd for capturing! fail. I don't know why that is happening now to be honest, maybe it was because I was in a Matrox HD sequence before and the input device wasn't set correctly? I will double-check it again and see what the deal is.
I am very tempted to just get an el-cheapo nVidia 8400GS Turbo Cache 512M DDR3 DVI HDMI which is only $39!!!! It has HDMI and is small and has a very low power drain on the system. If it outputs to the HDTV then that's all I need, if it doesn't, I sell it on ebay for $25 and lose $14, big deal.

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

MAC OS 10.7.4 3.2GHz Quad-Core Intel Xeon processors, 12GB of 800MHz DDR2 and 2 ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports) . The problem is, I woul like to use one output as main and the three others as secondary or extended desktop but the system don't allow me use two diferent video cards this way.

Amd graphics card input output

i need to know if this would work on my mointor http://www.amazon.ca/gp/product/B00EF0Z2RM/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
graphics card xfx radeon 6670 2Gb
my monitor is only vga and that graphics card doesnt have vga i need a hdmi conversion
so it can work with the monitor thanks

Not a problem. Thank you for the additional information.
I don't believe that the video converter in the link will work with your computer. It has a HDMI and VGA connector. There is no HDMI port shown on your computer's Back I/O ports. You will need the same type of converter with USB 2.0 to VGA adapter.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Graphics card not available for video output

Hi, I'm trying to use a consumer TV as a video monitor (additional to two computer monitors). I have an ATI Radeon 9200 graphics card with S-vid out for the purpose. I use a separate card for the two computer monitors. This setup works fine on the desktop and for Quicktime (present movie command), but Final Cut does not pick up the 9200 in the list of available devices for video playback in AV setup. I've tried using my Sony Handycam as a firewire to video converter instead and this has patchy results a best, but did work just. I'd much rather try to set up the ATI if possible.
Thanks in advance for any help.

Thank you Jerry, I was obviously given a poor recommendation to buy that card with the TV out if it was never going to work. I'm sure however, that I have used many systems with a dedicated TV out from a graphics card that did not involve using firewire. It seems that Apple don't think this is a very good idea either since they have stopped support for this (except on AGP cards) in later versions of Final Cut. Unfortunately I can't seem to find an up to date AGP with a video out. And I wish I could get that firewire trick working with my dv camera! Cheers, Matt

Will the ATI Mobility Radeon HD 3400 Series Graphics card be capable of outputting at 2560x1440?

I currently have a dell studio 15 laptop with an ATI Mobility Radeon HD 3400 graphics card, i'm planning to upgrade to an iMac with the same 27 inch display as the one in this forum but i was hoping to continue to use this computer and use the iMacs great display as an external monitor whenever i want to use windows, i was wondering if my graphics card supports such a high resolution or not?
Thanks

Since I'm running Windows 7 Enterprise, I cannot use Windows Update as it is controlled by WSUS. Anyway, after hours of discussing with the IT experts at my workplace, none of them could solve the problem. They even said I can never run my video card again as it is not compatible with Windows 7.
But I didn't give up.
After hours of figuring out a solution, I decided to download and try out the "ThinkPad Switchable Graphics Driver for Windows 7 - ThinkPad R400, T400, T500, W500" and guessed what? It worked! The Catalyst center was also installed. Who knew it was the Switchable Graphics Driver when the ATI card was the only one shown in Device Manager to be not working.
Here's the link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73641
I hope this works for all of you who had the same problems as me. Cheers!

HP G62-455TX Graphic Card malfunctioning

Problem is the laptop screen flickered and went off several times, displaying error message that AMD crashed. I reinstalled the drivers replacing the older with the older version and then with the latest version given on the website.
But in both cases, the laptop screen totally went blank not even showing the BIOS screen. I connected it to the external monitor to get the output. It shows a bluescreen dead screen and restarts. However, it boots up on the safe mode (but on a external monitor).
However, The laptop screen is off blank throughout.
I tried booting it up with Linux-Fedora 20 XFCE, but it gave error in loading Radeon graphic card, and it did not even boot up.
The laptop has the following specs:-
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&dlc=en&docname=c02715249&lc=en&jumpid=reg_r1002_uk...
Hardware
Product Name G62-455TX Product Number XV925PA Microprocessor 2.53 GHz Intel Core i3-380M Processor Microprocessor Cache 3 MB L3 cache Memory 3 GB DDR3 (1 x 1024 MB + 1 x 2048 MB) Memory Max Supports up to 8 GB DDR3 memory Video Graphics ATI Mobility Radeon HD 6370 Graphics (1 GB DDR3 dedicated) Display 39.6 cm (15.6") diagonal High-Definition LED HP BrightView Display (1366 x 768) Hard Drive 320 GB SATA (5400 rpm) Multimedia Drive SATA optical drive: LightScribe SuperMulti DVD±R/RW with Double Layer Support Network Card Integrated 10/100BASE-T Ethernet LAN Wireless Connectivity Bluetooth wireless networking
802.11 b/g/n Sound Altec Lansing speakers Keyboard 101 key compatible, Full size keyboard with One touch launch keys and Action keys Pointing Device Touch Pad with integrated On/Off button and 2-way scroll pad support PC Card Slots 5-in-1 integrated Digital Media Reader for Secure Digital cards, MultiMedia cards, Memory Stick, Memory Stick Pro or xD Picture cards External Ports
1 VGA port
1 stereo headphone-out
1 microphone-in
3 USB 2.0 ports
1 RJ45 ethernet port
Dimensions 37.4 x 24.6 x 3.18 cm Weight Starting at 2.50 kg Power 90 W AC Power Adapter
6-cell Lithium-Ion (Li-Ion) battery What's In The Box Webcam with Integrated Microphone (VGA)
This question was solved.
View Solution.

Hi @Rock997 ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that the display flickered several times and then displayed a black or blank screen. You connected an external monitor and on startup a blue screen displays and restarts.
You tried booting into Safe mode but nothing displays on the external monitor. Notebook display remains blank.
You tried booting with LInux but it also gave the graphic card error.
Here is a link to Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot to assist you.
Here is the HP G62 Notebook PC Maintenance and Service Guide. You will notice there is no recommended replacement graphic cards.
You would need to replace the motherboard or system board.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MSI 945GM3 with PCI-e graphics card

I have a 945GM3 motherboard and am trying to put a EN8600GT video card on it (dual monitor/PCI Express). When I install the video card I get no video output from the card or the motherboard video controller. The system still boots as I can shut down windows from the keyboard and the system powers off. But I can't see anything. Same result if I disable the motherboard video in the BIOS. On page 3-10 of the manual it shows the Advanced Chipset Setup which has a selection for setting which graphics card to initialize first, but I don't have that entry in my BIOS settings (only the other two selections on the page). I have upgraded to v5.60 of the BIOS and that has not helped either. Unfortunately I don't have another motherboard to test the graphics card on, but before I return it I'd like to be sure that is the problem.
Thank you.

Clearing CMOS and powering with the monitor plugged into the PCI-e card did make that card appear. And both outputs on the EN8600 now work. But at that point I don't seem to be able to access the built-in display adapter. If I take the EN8600 card out, the motherboard video controller reappears, but it disappears as soon as the EN8600 card is plugged in. Is this a limitation of the motherboard?
Thanks for the help.
Glen

Output in graphic card

Similar Messages

Maybe you are looking for