Output is quiet on Right Chan

Hi
Just got the Zen Micro photo and tried some songs and the right earphone is much quieter than the left. Tried another pair of headphones and same problem.
Whats wrong? or is this a manufacture fault? Anyway I can fix it.
Thanks

well im not sure but maybe the player has a balance control so u can make it equall on both sides look around the system setingor extra just look around

Similar Messages

IPad2: After upgrad to iOS 8, video output lost left and right side

I have a cable for my iPad2, once plugged in the bottom slot, it outputs video to TV Component port and audio to my amplifier. It's been working for years. After iOS 8 upgrade, I notice the video output lost left and right side. It's like
[before iOS 8] Apple iPad is a wonderful product for me.
[after upgrade] iPad is a wonderful product
The "Apple" on the left, and "for me." on the right of screen is gone in output.

Change your Aspect Ratio on your TV to 16:9

After iOS 7 sound output is unbalanced left/right

On my GSM iPhone 4, after upgrade music output (left/right) is not balanced. How to fix?

There's a slider to adjust the headphone volume balance under Settings > General > Accessibility (in the 'hearing' section).
I had this problem too and it turns out that my earphones, rather than the phone, are at fault. Try with another pair of earphones, if you have one handy.

Audio output doesn't work right. How to fix it?

I plugged my earphones in and noticed that the left side was much louder than the right. I tried different earphones and and it works fine on my iphone so it definately is the plug in of my mac that now doesn't work properly anymore

What did you do, before this happened? Did you install new software? Update the system?
Have you tried to restart the iPhoneor to reset the iPhone? See: reset your device
http://support.apple.com/kb/TS3281
If that does not help, restore the device: restoring iOS software

Airport Express Speaker output very quiet with 60-cycle hum

I've previously hooked up my Airport Express to my stereo system via AirTunes, and it worked fine. But I just moved and set up my home network with my Airport Express connected to the stereo with the mini-stereo adapter. But now, when I play music over AirTunes, I can hear the music very faintly, but it's about the same volume as a 60-cycle electrical interference hum, and definitely not listenable. So I know the music is streaming and the AirPort is receiving, but I'm wondering if it's an electrical problem with the AirPort or output jack, or is there some software or hardware fit I can do myself. I've plugged in & out the cord, it works with an iPod, it's connected to a non-Phono jack of the stereo (AUX port), and I've reset the AirPort Express unit. Any other suggestions? Thanks in advance.

Hello AOSmith. Welcome to the Apple Discussions!
To rule out your stereo or audio cable, try substituting a pair of stereo headphones plugged directly into the AX's audio port. Do you still hear the hum? If so, then the problem is either with the AX itself or the power source is not properly shielded. Try connecting the AX to a known good power strip; one that has surge protection and/or noise cancelling capability would be ideal, and then, plug this into the outlet that you had the AXn connected to. Did this help? If not, then unfortunately, the problem may be with either the AX's audio and/or power circuit.

Audio is outputted only through the right speaker. There is no audio from the left one. Can anyone please help?

Whenever i try to play music without the headphones, the audio is outputted through only one speaker.

Thanks for the info

Toshiba 22DV501B SPDIF output too quiet

I recently purchased a Toshiba 22DV501B which I want to plug into my hi fi amp. I purchased a Cablesson® SAP-3 Digital to Analogue Audio Converter and plugged it in. It works, but the volume is so low I need to turn my amp right up to hear it.
Is there any way of altering the volume of the SPDIF digital out?
Cheers

I don't believe that's possible, but I don't have specific information on that model because it appears to be from the UK. This site only officially supports the US region. You might want to contact Toshiba UK.
- Peter

Creative Soundblaster Live! 24-Bit External card - noise in right chan

I have a Creative Soundblaster Li've! 24-Bit External card installed on a Dell XPS 40 with 2GB RAM and Windows XP to replace integrated sound that came with the system, a sound problem developed recently that I never noticed before, there is a popping sound in the right channel which isnt loud but noticeable when no other audio is playing, the sound is a fast popping sound like a idling engine, Ive tried updating the Nvidia video drivers, uninstalling software that may have caused conflicts, looking in the bios, I also tried uninstalling the Creative drivers and before installing the drivers again when the system booted and detected the new hardware I could hear the popping noise without any drivers loaded yet, nothing has helped this problem, does anyone have any suggestions of what is causing the noise? Thanks for any helpMessage Edited by Gary040 on -5-2008 07:38 AM

Yes exactly as you mentioned. I have SoundBlaster Li've! 24-Bit Internal and facing the same problem. All is working very good, but only sound in WOW is terrible: it's muffled, degraded and seems to runs only in 22khz.
It is a big irony because i bought this card only for WoW to replace my onboard card and now the old one sounds much better in WoW as the new SB
Anyone with help?
Now it seems that I return my card like you... and people from creative, think about it! WoW is most played game ever!Message Edited by magnetique on 0-06-2006 :24 AM

Speakerphone output too quiet on iPhone 6

I can hardly hear the other side on iPhone 6 when I turn on the speakerphone, even at max volume.

I'm exactly the same. Using the latest app update, and the latest iOS, I can barely hear on my iPhone 6. Looked at every volume setting I can find but nothing has helped.
Googling the problem, it looks like the same thing happened when the iPhone 5 came out and there was a pretty quick response. Now..... not so much....

Right transmission medium and communication in output determination

Hello Gurus,
I defined a new output type for shipping, wrote a requirement, but I don't know which transmission medium should I define in the output type and the right communication definition in the condition records.
I need this output to execute a program that calls a "proxy to file" method (interface).
Each transmission medium I used caused me a dump, so eather the program the ABAPer gave me is wrong, or my definition is wrong.
Regards,
Daphna

Apologies for previous response.
General for these kind of requirement. it could be either 1-Send with periodically scheduled job & 2-Send with job, with additional time specification as Dispatch time with either 5(External Send) or 6(EDI) or 7(simple mail) as Transmission Medium.
Don't forget to maintain relevant communication strategy, say, WEBM-Send external mail in communication method.
Regards
JP

Right ear in Aurvana in ear headphones quieter than the left

Ok so I've bought my creative Aurvana in ear headphones about three months ago from amazon after much research. The left ear has always been a fair bit louder but I couldn't notice it too much with both plugs in my ears. I know it's not my ears, I tried them in both and it sounds the same. I've tried a set of soundsquared earphones that I also bought at amazon and they are equally loud in both ears so I know it's my MP3 players either(cowon d2 and Zune). The left ear sounds ok but the right earbud violins and singing sounds kind of bright in the high range but it's not as loud either. I know I should of asked earlier but I was thinking it was just the way they were. So my question is, are they defective? I've always kept them clean and dug out microscopic wax with the cleaning tool and have even been trying to dig for stuff that aint there in frustration. Is this loud in left ear and quieter in right normal? Is this just how the headphones are built and it has some purprose to it or did I get a bad one? I wouldn't think that 80 dollar earbuds would be defective.

I have exactly the same problem with these headphones. Exactly the same earphone, and those frequencies. Yes it is absolutely not normal, the headphones are not cheap. Wrote in support, waiting for an answer ...

Iphone 5 iOS 7 headphone output problem

Hi guys,
So the headphone output on my iPhone 5 isn't working properly. There is a lot of background noise and only outputs very quietly on one side. If you start at nothing and slowly turn up the volume then you can hear clear stages and clicks every time you go up by 1. Eventually when you reach the last orange / first red it jumps to an insanely loud level and distorts. The right hand side can be heard very quietly at this point and us distorted as well. Any ideas? The phone is about two a months old and has no visual damage.
Cheers
Tom

Hello Ant80,
Thank you for the details of the issue you are experiencing with connecting to the Internet.
I recommend reviewing the articles below, but the following step specifically stands out to me for the issue you described:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

Front Speakers Do Not Output So

Hello,
I have the X-Fi Xtreme Gamer sound card, and my speakers are the Logitech z5300e series. I do not know when this happened, but all of a sudden, my front two speakers (of a 5. set) are either outputting very quiet sounds, or none at all. I have tested these speakers elsewhere, and have swapped cables in order to make sure that my speakers were ok. Which, they were, and played the rear speaker output. Anyway, I have fully uninstalled and reinstalled the appropriate drivers several times over, and still no such luck. I have made sure that everything is set to 5., I have messed with SVM, CMSS, etc. The cables are hooked up properly. Also, I find this to be rather odd... My headphones do not work either via the Logitech remote (that's how I have always plugged in my headphones for this particular setup). It doesn't matter if I change it to the "headphones" settings within the "entertainment" section, I still get zero sound.
Any ideas would be greatly appreciated!

Bump. Anyone?
And in regards to the headphones - I got it so that it works on the right ear, and not the left. odd.

Hdmi output not found under playback in the control panel

I am trying to get sound to go through my tv with my HDMI cable. I looked in the control panel under sound - playback. I do not see the option of the hdmi output. I have right clicked on the speaker and clicked disabled and it still does not come up.
I have idt high definition audio codec driver on my computer. Is it compatible?
I have also tried to connect an rca cable to the headphone jack and hook it to the tv like that and sound still didn't work?
Do you have any suggestions?

Hi again tfinley,
It is good to hear back from you!
Since you have updated all of the original drivers on your system, and your notebook still does not display an HDMI audio option, I recommend returning your system back to a previous restore point when this option was available. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

External monitor shifted to the right

i just got an external monitor (acer v223W) which support max resolution of 1680x1050. but when i try and use xrandr like:
xrandr --output LVDS1 --mode 1440x900 --output VGA1 --mode 1680x1050 --right-of LVDS1
what i see is shifted by about 100px or so to the left. so on my right had side i have a black bar and when i move a window from my external monitor to my laptop i can tell that the window disappears for a bit before staring to show up on my laptop. before i had a different monitor with max resolution of 1600x900 and xrandr worked great.
here is the info that i gathered:
- my laptop is (almost) up to date on all software
- it has two video cards: intel (which is the one i use) and nvidea (i disabled it in bios).
- i have intel video drivers installed:
: pacman -Qs intel
local/intel-dri 7.10.2-2
Mesa DRI drivers for Intel
local/xf86-video-intel 2.15.0-1 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
- here is what xrandr says
: xrandr -q
Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
1440x900 60.3*+ 50.1
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1680x1050+1440+0 (normal left inverted right x axis y axis) 473mm x 296mm
1680x1050 60.0*+
1600x1200 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
- here is the Xorg log
: cat /var/log/Xorg.0.log
[ 120.021]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 120.021] X Protocol Version 11, Revision 0
[ 120.021] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 120.021] Current Operating System: Linux jss-lenovo-105 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 20:29:33 CEST 2011 x86_64
[ 120.021] Kernel command line: root=/dev/disk/by-uuid/ad7e26d2-8144-4d4c-9c60-df4f7fcceda7 ro
[ 120.021] Build Date: 16 April 2011 12:02:01PM
[ 120.021]
[ 120.021] Current version of pixman: 0.20.2
[ 120.021] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 120.021] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 120.022] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 16 11:44:46 2011
[ 120.111] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 120.130] (==) No Layout section. Using the first Screen section.
[ 120.130] (==) No screen section available. Using defaults.
[ 120.130] (**) |-->Screen "Default Screen Section" (0)
[ 120.130] (**) | |-->Monitor "<default monitor>"
[ 120.130] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 120.130] (==) Automatically adding devices
[ 120.130] (==) Automatically enabling devices
[ 120.180] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 120.180] Entry deleted from font path.
[ 120.213] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 120.213] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 120.213] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 120.213] (II) Loader magic: 0x7d6fa0
[ 120.213] (II) Module ABI versions:
[ 120.213] X.Org ANSI C Emulation: 0.4
[ 120.213] X.Org Video Driver: 10.0
[ 120.213] X.Org XInput driver : 12.2
[ 120.213] X.Org Server Extension : 5.0
[ 120.214] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2112 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 120.214] (--) PCI: (0:0:2:1) 8086:2a43:17aa:2112 rev 7, Mem @ 0xf4200000/1048576
[ 120.215] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 120.215] (II) LoadModule: "extmod"
[ 120.229] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 120.235] (II) Module extmod: vendor="X.Org Foundation"
[ 120.235] compiled for 1.10.1, module version = 1.0.0
[ 120.235] Module class: X.Org Server Extension
[ 120.235] ABI class: X.Org Server Extension, version 5.0
[ 120.235] (II) Loading extension MIT-SCREEN-SAVER
[ 120.235] (II) Loading extension XFree86-VidModeExtension
[ 120.235] (II) Loading extension XFree86-DGA
[ 120.235] (II) Loading extension DPMS
[ 120.235] (II) Loading extension XVideo
[ 120.235] (II) Loading extension XVideo-MotionCompensation
[ 120.235] (II) Loading extension X-Resource
[ 120.235] (II) LoadModule: "dbe"
[ 120.236] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 120.236] (II) Module dbe: vendor="X.Org Foundation"
[ 120.236] compiled for 1.10.1, module version = 1.0.0
[ 120.236] Module class: X.Org Server Extension
[ 120.236] ABI class: X.Org Server Extension, version 5.0
[ 120.236] (II) Loading extension DOUBLE-BUFFER
[ 120.236] (II) LoadModule: "glx"
[ 120.236] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 120.247] (II) Module glx: vendor="X.Org Foundation"
[ 120.247] compiled for 1.10.1, module version = 1.0.0
[ 120.247] ABI class: X.Org Server Extension, version 5.0
[ 120.247] (==) AIGLX enabled
[ 120.247] (II) Loading extension GLX
[ 120.250] (II) LoadModule: "record"
[ 120.250] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 120.250] (II) Module record: vendor="X.Org Foundation"
[ 120.250] compiled for 1.10.1, module version = 1.13.0
[ 120.250] Module class: X.Org Server Extension
[ 120.250] ABI class: X.Org Server Extension, version 5.0
[ 120.251] (II) Loading extension RECORD
[ 120.251] (II) LoadModule: "dri"
[ 120.251] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 120.269] (II) Module dri: vendor="X.Org Foundation"
[ 120.269] compiled for 1.10.1, module version = 1.0.0
[ 120.269] ABI class: X.Org Server Extension, version 5.0
[ 120.269] (II) Loading extension XFree86-DRI
[ 120.269] (II) LoadModule: "dri2"
[ 120.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 120.270] (II) Module dri2: vendor="X.Org Foundation"
[ 120.270] compiled for 1.10.1, module version = 1.2.0
[ 120.270] ABI class: X.Org Server Extension, version 5.0
[ 120.270] (II) Loading extension DRI2
[ 120.270] (==) Matched intel as autoconfigured driver 0
[ 120.270] (==) Matched vesa as autoconfigured driver 1
[ 120.270] (==) Matched fbdev as autoconfigured driver 2
[ 120.270] (==) Assigned the driver to the xf86ConfigLayout
[ 120.270] (II) LoadModule: "intel"
[ 120.279] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 120.299] (II) Module intel: vendor="X.Org Foundation"
[ 120.299] compiled for 1.10.0.902, module version = 2.15.0
[ 120.299] Module class: X.Org Video Driver
[ 120.299] ABI class: X.Org Video Driver, version 10.0
[ 120.299] (II) LoadModule: "vesa"
[ 120.299] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 120.300] (II) Module vesa: vendor="X.Org Foundation"
[ 120.300] compiled for 1.10.0, module version = 2.3.0
[ 120.300] Module class: X.Org Video Driver
[ 120.300] ABI class: X.Org Video Driver, version 10.0
[ 120.300] (II) LoadModule: "fbdev"
[ 120.309] (WW) Warning, couldn't open module fbdev
[ 120.309] (II) UnloadModule: "fbdev"
[ 120.309] (II) Unloading fbdev
[ 120.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 120.309] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 120.309] (II) VESA: driver for VESA chipsets: vesa
[ 120.309] (--) using VT number 7
[ 120.313] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 120.313] (WW) Falling back to old probe method for vesa
[ 120.314] drmOpenDevice: node name is /dev/dri/card0
[ 120.314] drmOpenDevice: open result is 8, (OK)
[ 120.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 120.314] drmOpenDevice: node name is /dev/dri/card0
[ 120.314] drmOpenDevice: open result is 8, (OK)
[ 120.314] drmOpenByBusid: drmOpenMinor returns 8
[ 120.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 120.314] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 120.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 120.314] (==) intel(0): RGB weight 888
[ 120.314] (==) intel(0): Default visual is TrueColor
[ 120.314] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 120.314] (--) intel(0): Chipset: "GM45"
[ 120.314] (**) intel(0): Relaxed fencing enabled
[ 120.314] (**) intel(0): Framebuffer tiled
[ 120.314] (**) intel(0): Pixmaps tiled
[ 120.314] (**) intel(0): 3D buffers tiled
[ 120.314] (**) intel(0): SwapBuffers wait enabled
[ 120.314] (==) intel(0): video overlay key set to 0x101fe
[ 120.327] (II) intel(0): Output LVDS1 has no monitor section
[ 120.328] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 120.346] (II) intel(0): Output VGA1 has no monitor section
[ 120.347] (II) intel(0): Output DP1 has no monitor section
[ 120.347] (II) intel(0): EDID for output LVDS1
[ 120.347] (II) intel(0): Manufacturer: LEN Model: 4033 Serial#: 0
[ 120.347] (II) intel(0): Year: 2007 Week: 0
[ 120.347] (II) intel(0): EDID Version: 1.3
[ 120.347] (II) intel(0): Digital Display Input
[ 120.347] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 120.347] (II) intel(0): Gamma: 2.20
[ 120.347] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 120.347] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 120.347] (II) intel(0): First detailed timing is preferred mode
[ 120.348] (II) intel(0): redX: 0.590 redY: 0.330 greenX: 0.310 greenY: 0.570
[ 120.348] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 120.348] (II) intel(0): Manufacturer's mask: 0
[ 120.348] (II) intel(0): Supported detailed timing:
[ 120.348] (II) intel(0): clock: 100.0 MHz Image Size: 304 x 190 mm
[ 120.348] (II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1800 h_border: 0
[ 120.348] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 907 v_blanking: 922 v_border: 0
[ 120.348] (II) intel(0): Supported detailed timing:
[ 120.348] (II) intel(0): clock: 82.0 MHz Image Size: 304 x 190 mm
[ 120.348] (II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1768 h_border: 0
[ 120.348] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 120.348] (II) intel(0): Unknown vendor-specific block f
[ 120.348] (II) intel(0): AUOB141PW03V0
[ 120.348] (II) intel(0): EDID (in hex):
[ 120.348] (II) intel(0): 00ffffffffffff0030ae334000000000
[ 120.348] (II) intel(0): 00110103801e1378ea24e597544f9227
[ 120.348] (II) intel(0): 22505400000001010101010101010101
[ 120.348] (II) intel(0): 0101010101011027a068518416303020
[ 120.348] (II) intel(0): 340030be100000180320a04851841a30
[ 120.348] (II) intel(0): 3020360030be100000180000000f0095
[ 120.348] (II) intel(0): 0a32950a2814010006af5125000000fe
[ 120.348] (II) intel(0): 0041554f4231343150573033563000cf
[ 120.348] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 120.348] (II) intel(0): Printing DDC gathered Modelines:
[ 120.348] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 120.348] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 120.348] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 120.348] (II) intel(0): Printing probed modes for output LVDS1
[ 120.348] (II) intel(0): Modeline "1440x900"x60.3 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 120.348] (II) intel(0): Modeline "1440x900"x50.1 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 120.348] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 120.348] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 120.348] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 120.348] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 120.366] (II) intel(0): EDID for output VGA1
[ 120.367] (II) intel(0): EDID for output DP1
[ 120.367] (II) intel(0): Output LVDS1 connected
[ 120.367] (II) intel(0): Output VGA1 disconnected
[ 120.367] (II) intel(0): Output DP1 disconnected
[ 120.367] (II) intel(0): Using exact sizes for initial modes
[ 120.367] (II) intel(0): Output LVDS1 using initial mode 1440x900
[ 120.367] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 120.367] (II) intel(0): Kernel page flipping support detected, enabling
[ 120.367] (**) intel(0): Display dimensions: (300, 190) mm
[ 120.367] (**) intel(0): DPI set to (121, 120)
[ 120.367] (II) Loading sub module "fb"
[ 120.367] (II) LoadModule: "fb"
[ 120.368] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 120.396] (II) Module fb: vendor="X.Org Foundation"
[ 120.396] compiled for 1.10.1, module version = 1.0.0
[ 120.396] ABI class: X.Org ANSI C Emulation, version 0.4
[ 120.396] (II) Loading sub module "dri2"
[ 120.396] (II) LoadModule: "dri2"
[ 120.396] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 120.396] (II) Module dri2: vendor="X.Org Foundation"
[ 120.397] compiled for 1.10.1, module version = 1.2.0
[ 120.397] ABI class: X.Org Server Extension, version 5.0
[ 120.397] (II) UnloadModule: "vesa"
[ 120.397] (II) Unloading vesa
[ 120.397] (==) Depth 24 pixmap format is 32 bpp
[ 120.397] (II) intel(0): [DRI2] Setup complete
[ 120.397] (II) intel(0): [DRI2] DRI driver: i965
[ 120.397] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[ 120.473] (II) UXA(0): Driver registered support for the following operations:
[ 120.473] (II) solid
[ 120.473] (II) copy
[ 120.473] (II) composite (RENDER acceleration)
[ 120.473] (II) put_image
[ 120.473] (II) get_image
[ 120.473] (==) intel(0): Backing store disabled
[ 120.473] (==) intel(0): Silken mouse enabled
[ 120.484] (II) intel(0): Initializing HW Cursor
[ 120.540] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 120.542] (==) intel(0): DPMS enabled
[ 120.542] (==) intel(0): Intel XvMC decoder enabled
[ 120.542] (II) intel(0): Set up textured video
[ 120.542] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 120.542] (II) intel(0): direct rendering: DRI2 Enabled
[ 120.542] (==) intel(0): hotplug detection: "enabled"
[ 120.542] (--) RandR disabled
[ 120.542] (II) Initializing built-in extension Generic Event Extension
[ 120.542] (II) Initializing built-in extension SHAPE
[ 120.542] (II) Initializing built-in extension MIT-SHM
[ 120.542] (II) Initializing built-in extension XInputExtension
[ 120.542] (II) Initializing built-in extension XTEST
[ 120.542] (II) Initializing built-in extension BIG-REQUESTS
[ 120.542] (II) Initializing built-in extension SYNC
[ 120.542] (II) Initializing built-in extension XKEYBOARD
[ 120.542] (II) Initializing built-in extension XC-MISC
[ 120.542] (II) Initializing built-in extension SECURITY
[ 120.542] (II) Initializing built-in extension XINERAMA
[ 120.542] (II) Initializing built-in extension XFIXES
[ 120.542] (II) Initializing built-in extension RENDER
[ 120.542] (II) Initializing built-in extension RANDR
[ 120.542] (II) Initializing built-in extension COMPOSITE
[ 120.542] (II) Initializing built-in extension DAMAGE
[ 120.707] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 120.707] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 120.707] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 120.707] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 120.707] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 120.707] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 120.707] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 120.708] (II) intel(0): Setting screen physical size to 381 x 238
[ 121.043] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 121.043] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 121.043] (II) LoadModule: "evdev"
[ 121.043] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.049] (II) Module evdev: vendor="X.Org Foundation"
[ 121.049] compiled for 1.10.0, module version = 2.6.0
[ 121.049] Module class: X.Org XInput Driver
[ 121.049] ABI class: X.Org XInput driver, version 12.2
[ 121.049] (II) Using input driver 'evdev' for 'Power Button'
[ 121.049] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.049] (**) Power Button: always reports core events
[ 121.049] (**) Power Button: Device: "/dev/input/event4"
[ 121.063] (--) Power Button: Found keys
[ 121.063] (II) Power Button: Configuring as keyboard
[ 121.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 121.063] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 121.063] (**) Option "xkb_rules" "evdev"
[ 121.063] (**) Option "xkb_model" "evdev"
[ 121.063] (**) Option "xkb_layout" "us"
[ 121.086] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 121.086] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 121.086] (II) Using input driver 'evdev' for 'Video Bus'
[ 121.086] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.086] (**) Video Bus: always reports core events
[ 121.086] (**) Video Bus: Device: "/dev/input/event16"
[ 121.100] (--) Video Bus: Found keys
[ 121.100] (II) Video Bus: Configuring as keyboard
[ 121.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16/event16"
[ 121.100] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 121.100] (**) Option "xkb_rules" "evdev"
[ 121.100] (**) Option "xkb_model" "evdev"
[ 121.100] (**) Option "xkb_layout" "us"
[ 121.106] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 121.106] (II) No input driver/identifier specified (ignoring)
[ 121.106] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 121.106] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 121.106] (II) Using input driver 'evdev' for 'Sleep Button'
[ 121.106] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.106] (**) Sleep Button: always reports core events
[ 121.106] (**) Sleep Button: Device: "/dev/input/event3"
[ 121.116] (--) Sleep Button: Found keys
[ 121.116] (II) Sleep Button: Configuring as keyboard
[ 121.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 121.116] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 121.116] (**) Option "xkb_rules" "evdev"
[ 121.116] (**) Option "xkb_model" "evdev"
[ 121.116] (**) Option "xkb_layout" "us"
[ 121.120] (II) config/udev: Adding input device Integrated Camera (/dev/input/event15)
[ 121.120] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 121.120] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 121.120] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.120] (**) Integrated Camera: always reports core events
[ 121.120] (**) Integrated Camera: Device: "/dev/input/event15"
[ 121.146] (--) Integrated Camera: Found keys
[ 121.146] (II) Integrated Camera: Configuring as keyboard
[ 121.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input15/event15"
[ 121.146] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 121.146] (**) Option "xkb_rules" "evdev"
[ 121.146] (**) Option "xkb_model" "evdev"
[ 121.146] (**) Option "xkb_layout" "us"
[ 121.147] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 121.147] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.150] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event12)
[ 121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 121.150] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[ 121.150] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[ 121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event12"
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 121.173] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input12/event12"
[ 121.173] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 121.174] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse1)
[ 121.174] (II) No input driver/identifier specified (ignoring)
[ 121.174] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event13)
[ 121.174] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.174] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 121.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.174] (**) USB-compliant keyboard: always reports core events
[ 121.174] (**) USB-compliant keyboard: Device: "/dev/input/event13"
[ 121.193] (--) USB-compliant keyboard: Found keys
[ 121.193] (II) USB-compliant keyboard: Configuring as keyboard
[ 121.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input13/event13"
[ 121.193] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 121.193] (**) Option "xkb_rules" "evdev"
[ 121.193] (**) Option "xkb_model" "evdev"
[ 121.193] (**) Option "xkb_layout" "us"
[ 121.194] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event14)
[ 121.194] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.194] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 121.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.194] (**) USB-compliant keyboard: always reports core events
[ 121.194] (**) USB-compliant keyboard: Device: "/dev/input/event14"
[ 121.220] (--) USB-compliant keyboard: Found 1 mouse buttons
[ 121.220] (--) USB-compliant keyboard: Found scroll wheel(s)
[ 121.220] (--) USB-compliant keyboard: Found relative axes
[ 121.220] (--) USB-compliant keyboard: Found x and y relative axes
[ 121.220] (--) USB-compliant keyboard: Found absolute axes
[ 121.220] (--) USB-compliant keyboard: Found keys
[ 121.220] (II) USB-compliant keyboard: Configuring as mouse
[ 121.220] (II) USB-compliant keyboard: Configuring as keyboard
[ 121.220] (II) USB-compliant keyboard: Adding scrollwheel support
[ 121.220] (**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 121.220] (**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 121.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input14/event14"
[ 121.220] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 121.220] (**) Option "xkb_rules" "evdev"
[ 121.220] (**) Option "xkb_model" "evdev"
[ 121.220] (**) Option "xkb_layout" "us"
[ 121.220] (II) USB-compliant keyboard: initialized for relative axes.
[ 121.220] (WW) USB-compliant keyboard: ignoring absolute axes.
[ 121.220] (**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 121.220] (**) USB-compliant keyboard: (accel) acceleration profile 0
[ 121.220] (**) USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 121.220] (**) USB-compliant keyboard: (accel) acceleration threshold: 4
[ 121.220] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse2)
[ 121.220] (II) No input driver/identifier specified (ignoring)
[ 121.224] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 121.224] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.224] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 121.224] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.224] (**) AT Translated Set 2 keyboard: always reports core events
[ 121.224] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 121.246] (--) AT Translated Set 2 keyboard: Found keys
[ 121.246] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 121.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 121.246] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 121.246] (**) Option "xkb_rules" "evdev"
[ 121.246] (**) Option "xkb_model" "evdev"
[ 121.246] (**) Option "xkb_layout" "us"
[ 121.247] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 121.247] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 121.247] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 121.247] (II) LoadModule: "synaptics"
[ 121.247] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 121.248] (II) Module synaptics: vendor="X.Org Foundation"
[ 121.248] compiled for 1.10.0, module version = 1.4.0
[ 121.248] Module class: X.Org XInput Driver
[ 121.248] ABI class: X.Org XInput driver, version 12.2
[ 121.248] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 121.248] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 121.248] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 121.248] (**) Option "Device" "/dev/input/event11"
[ 121.373] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
[ 121.373] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
[ 121.373] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 121.373] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 121.373] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[ 121.373] (**) Option "TapButton1" "1"
[ 121.373] (**) Option "TapButton2" "2"
[ 121.373] (**) Option "TapButton3" "3"
[ 121.480] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 121.480] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 121.533] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 121.533] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 121.533] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 121.533] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 121.613] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 121.613] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 121.613] (II) No input driver/identifier specified (ignoring)
[ 121.614] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
[ 121.614] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 121.614] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 121.614] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.614] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 121.614] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event17"
[ 121.640] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 121.640] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 121.640] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 121.640] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 121.640] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 121.640] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 121.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
[ 121.640] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 121.640] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 121.640] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 121.640] (II) No input driver/identifier specified (ignoring)
[ 121.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 121.640] (II) No input driver/identifier specified (ignoring)
[ 121.641] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 121.641] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 121.641] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 121.641] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.641] (**) ThinkPad Extra Buttons: always reports core events
[ 121.641] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 121.666] (--) ThinkPad Extra Buttons: Found keys
[ 121.666] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 121.666] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 121.666] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 121.666] (**) Option "xkb_rules" "evdev"
[ 121.666] (**) Option "xkb_model" "evdev"
[ 121.666] (**) Option "xkb_layout" "us"
[ 122.391] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 122.391] (II) intel(0): Printing DDC gathered Modelines:
[ 122.391] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 122.391] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 122.411] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 122.411] (II) intel(0): Printing DDC gathered Modelines:
[ 122.411] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 122.411] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 336.811] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 336.811] (II) intel(0): Printing DDC gathered Modelines:
[ 336.811] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 336.811] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 336.835] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 336.835] (II) intel(0): Printing DDC gathered Modelines:
[ 336.835] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 336.835] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 343.607] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 343.607] (II) intel(0): Printing DDC gathered Modelines:
[ 343.607] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 343.607] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 343.672] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 343.673] (II) intel(0): Printing DDC gathered Modelines:
[ 343.673] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 343.673] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 343.735] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 343.735] (II) intel(0): Printing DDC gathered Modelines:
[ 343.736] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 343.736] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 344.801] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 344.801] (II) intel(0): Printing DDC gathered Modelines:
[ 344.801] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 344.801] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 344.867] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 344.867] (II) intel(0): Printing DDC gathered Modelines:
[ 344.867] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 344.867] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.559] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.559] (II) intel(0): Printing DDC gathered Modelines:
[ 362.559] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.559] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.624] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.624] (II) intel(0): Printing DDC gathered Modelines:
[ 362.624] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.624] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.692] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.692] (II) intel(0): Printing DDC gathered Modelines:
[ 362.692] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.692] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.756] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 362.774] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.774] (II) intel(0): Printing DDC gathered Modelines:
[ 362.774] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.774] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.847] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.847] (II) intel(0): Printing DDC gathered Modelines:
[ 362.847] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.847] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 525.745] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 525.745] (II) intel(0): Printing DDC gathered Modelines:
[ 525.745] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 525.745] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 530.202] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 530.202] (II) intel(0): Printing DDC gathered Modelines:
[ 530.202] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 530.202] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 536.835] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 536.835] (II) intel(0): Printing DDC gathered Modelines:
[ 536.835] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 536.835] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 539.995] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 539.995] (II) intel(0): Printing DDC gathered Modelines:
[ 539.995] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 539.995] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 540.067] (II) intel(0): Allocated new frame buffer 3136x1050 stride 12800, tiled
[ 540.116] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 540.116] (II) intel(0): Printing DDC gathered Modelines:
[ 540.116] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 540.116] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 540.199] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 540.199] (II) intel(0): Printing DDC gathered Modelines:
[ 540.199] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 540.199] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 551.649] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 551.649] (II) intel(0): Printing DDC gathered Modelines:
[ 551.649] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 551.649] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 551.717] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 551.717] (II) intel(0): Printing DDC gathered Modelines:
[ 551.717] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 551.717] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 551.786] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 551.786] (II) intel(0): Printing DDC gathered Modelines:
[ 551.786] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 551.786] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1499.858] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1499.858] (II) intel(0): Printing DDC gathered Modelines:
[ 1499.858] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1499.859] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.345] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.345] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.345] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.345] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.411] (II) intel(0): Allocated new frame buffer 3200x1050 stride 12800, tiled
[ 1506.470] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.470] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.470] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.470] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.547] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.547] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.547] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.547] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.608] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.608] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.608] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.608] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.672] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.672] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.672] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.672] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.035] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.036] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.036] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.036] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.107] (II) intel(0): Allocated new frame buffer 3392x1050 stride 13824, tiled
[ 1512.187] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.187] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.187] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.187] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.266] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.266] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.266] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.266] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.323] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.323] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.323] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.323] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.391] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.391] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.391] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.391] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
- i don't use 10-monitor.conf
- tried used disper
disper -e -r 1440x900,1680x1050 -t top
but that didn't work either
any suggestions are welcomed...

thanks for responses
@BurntSushi
here is what scrot gave me: http://dl.dropbox.com/u/292474/arch/output.jpg
but what i see is more like: http://dl.dropbox.com/u/292474/arch/output_view.jpg
@ewaller
interface is VGA. i have tried changing the H. Position on the monitor to "slide it back" but even when it's completely at 100% on one side i gain back half of the black area. i don't know what else i can change on the monitor that would help me out.

Output is quiet on Right Chan

Similar Messages

Maybe you are looking for