Output jack Imac 2011 and Yosemite

Hello everyone, my problem is when try use my headphones razor in my imac this not working, continued listening the sound in the speakers of the computer, and i need to know if this is problem of the OS Yosemite? Thanks

It does take a bit of time. The progress bar replaced the spinning gear thing. Booting on my MacBook Pro (SSD drive) takes 15-20 seconds.
Barry

Similar Messages

Microsoft word 2008 slow save with iMac 2009 and yosemite

I have microsoft word running on 4 different iMacs, all using Yosemite. My 2008 iMac 2009 iMac and 2014 retina display iMac all save word docs quickly. My 2011 iMac saves word docx and word doc documents slowly. All machines are basically the same. Memory is not the issue. I am running same updated version of word 2008 in same configuration. I reinstalled word on 2011 slow save iMac to no avail. problem started after upgraded to yosemite. i have 12 gigs of ram as i thought ram was issue. Any thoughts welcome. Are others noticing same problem?

There has been a better and free alternative to old versions of MS Word and MS Office since forever. Apache OpenOffice 4.1.1 is the latest version of a free and complete All-In-One document processor, spreadsheet, drawing, presentation, database, & formula software, found here: http://www.openoffice.org
It also reads, writes and translates MS Word, saves in many formats, and is pretty easy to use. It's entirely modern and compatible with all the latest Mac operating systems. Good luck.

IMac Retina 5K (2015) with 1xTDM iMac (2011) and 1x Dell External Display possible?

I have 1 x 27" iMac Retina 5K (2015), 1 x 27 " iMac (mid 2011) and a Dell P2715Q. I'd like to know if it's possible to run the 2011 iMac in Target Display Mode and my Dell as a secondary display from my 2015 iMac? My desired configuration is the 2015 iMac running two external displays. The 2015 iMac has an AMD Radeon R9 M295X 4GB Gfx card and both iMacs are running Yosemite 10.10.1
I have verified that running the 2011 iMac only via TDM works. Also running the Dell as an external Display only works (either at 4K resolution or the same resolution as the external iMac (2560x1440) via SwitchResX). With the Dell running @ 2560x1440, trying to put the 2011 iMac into TDM, causes a slow grey screen, then some display artefacts when coming out of TDM. Going in and out again appears to refresh the screen. But it doesn't seem to work.
I was wondering if anyone else has a similar configuration working and if so what settings or configuration changes to make?
Thanks!

I stopped by the Apple Store yesterday, and they were nice enough to try the Screen Sharing solution with me.
Indeed, we were able to share the screen of a MacBook Pro and display it on the iMac Retina 5K over a Thunderbolt Bridge network. (should also work over WiFi)
As I expected, (based on the native resolutions) the MBP window maxed out at about 55-60% of the height and width of the 5K display.
I didn't try experimenting with lower resolutions on the 5K.
I'd actually be OK with that solution except as we increased the font sizes, (e.g. 48 pt) we noticed a *lot* of ghosting around the characters.
I will have to try it again at normal font sizes and decide if that is something I can work with all day long.
Otherwise, I am leaning towards buying last year's iMac, which kinda' grates me the wrong way.
Thanks,
n8

Office 2011 and Yosemite

friends would tell them the error you have with Yosemite and Office 2011 either program package are cut when they load the fonts. know how to fix it? I have already downloaded all the update and has no solution. Help please

I am still having huge issues. There is 55 Gb available after I had gone through and deleted stuff off my hard drive so it cant be a storage problem.
I am really upset with this whole issue as it is making it virtually impossible for me to work from home so I am spending 28 hours a day in my office.
Not fun.
Does anyone have any other suggestions please? When will Yosemite be fixed so that this stops happening on Macbook Pros/ I cant afford a new laptop and this is not very old at all. .
I need to be able to save files, I also need to be able to access the full width of the screen and a raft of other things that are now impossible.
Thanks

Drivers imac 2011 and lion DVD

Hey.
For my mistake I erase all my HD at my mac and i have no OS at the moment. Now i will install windows 7 but i need the drivers because i dont have MAC OS to download the drivers from bootcamp, where i can download the drivers?
And how i can install mountain lion OSX for my mac? I dont have DVD installer :|
THanks and sorry for my english

Try to use ctrl+shift+eject button combination to awake display. See this: iMac 27" Black Screen?
Try to boot from USB or Apple install disc. See if it works.

HT203128 On my iMac (2011, using Yosemite) all music quits

No matter from what source (playlists, iTunes radio, Pandora) the music will quit unexpectedly after 4-5 tunes and return to the login screen. Why??

Hi P,
Try both ways, with it connected while booting and with it disconnected.
Also open Disk Utility and see if it is recognized there.

IMac 2011 and Windows XP. Everything works fine. Little problem there.

Everything works fine.
There is one small problem. The sound is not connected to external speakers.
The sound remains on the built-in speakers.
Here we can see, SPDIF shines red light.
Does anyone solved this problem?

All drivers and devices were installed correctly
Sorry, I write this from iPad, it works not very good.

We have an iMac 2011 and can not get reader to work and even view our tax forms we are working on 2290

help

Hi bpughtify,
What version of Adobe Reader are you using?
Were the forms working earlier?
Are you able to view other pdfs?
Do the forms work fine with Mac's inbuilt pdf Preview application?
Regards,
Rave

Projector not being outputted by iMac

I am trying to connect a projector to my iMac (2011) and the video will not output. Is this simply because there is no cables that work with the Thunderbolt yet?

I'm having the same issue.
2011 iMac 27" > thunderbolt port > Apple adapter to DVI > DVI cable > projector.
The picture shows up for a second then goes away.
If we hook up an old MBP 17" out the DVI port to the same cable it works perfectly.
I also tried my new 13" MBA, same issue as the iMac, picture for one second, then nothing.
Other tests:
I can hook the 13" MBA to a VGA cable and a 47" TV, it works perfect.
I can hook the above iMac, with the same Apple adapter to DVI, same DVI cable, to monitor and it works perfectly.
It looks like the problem is with the thunderbolt port when connecting to projectors.
Do I need a signal booster? Why does the TV & monitor work and not the projector? Why would an OLD MBP work w/ the projector when the new iMac or MBA doesn't?

Should I buy a new MBPr 15 or stay on iMac 2011?

The thing is, that I am not really sure, should I buy this machine or not, because actually I am a film-maker and currently I have an iMac (2011), and looks like I will work in the field in the future. So I am considering of buying a base MacBook Pro Retina 15, which is with i7 2.7GHz, 16GB of memory, 512 flash storage + Intel HD Graphics 4000 and NVIDIA GeForce GT 650M with 1GB of GDDR5.
And here is my iMac tech specs: i7 3.4GHz, 8GB of memory, 1TB 7200rpm hard drive + AMD Radeon HD 6970M with 1024Mb.
Also, I am going do a lot of pretty heavy video-editing (Premiere, After Effects) on the notebook, because I am going to sell my iMac. Well, if buying the Macbook makes sense.
So the question is, will it make a big difference in speed of rendrering, overall quality of work progress, and editing itself. Also, I am interested in Photoshop, if you, guys, worked in photoshop (photographers or web-designers) on this machine please leave a reply about how it goes there, I mean, is there any lags or retina-display problems, because I am also planning to work in all of Adobe Software.
Also, sorry for my english, this is not my native language, and sorry if this topic is not in the right place. Peace!

You will find that the relative performance of the two units will be very similar. see the attached bench test scores:
http://browser.primatelabs.com/mac-benchmarks
Note that with the retina, your storage will be significantly less. Whether the resolution of the retina is worth the premium you have to decide.
Though I an not an Adobe user, I would think that the retina with SSD as well as 16 GB RAM should handle those applications without any difficulty.
Ciao.

IMac 2011 getting BSOD in Bootcamp

Hello all.
I installed Bootcamp on my new iMac (2011) and installed Windows 7 SP1. I downloaded the iMac drivers to a CD via Bootcamp, and installed this.
When I run Dawn of War 2 in Windows, I get the dreaded blue screen error with a "atikmpag.sys" error.
Now, I get that this has something to do with the Apple-drivers and the ATI-graphics, but what can I do about it?
I tried installing the ATI drivers from their web-site, but it says that my card is not supported.
How do I replace the Apple-drivers in Windows 7 with, say, ATI's own driver?
Thanks in advance.

It is an ATI driver, this is the info from Display Adapters under Device Manager:
Driver Provider: ATI Technologies Inc.
Driver Date: 07-07-2011
Driver Version: 8.872.0.0
Digital Signer: Microsoft Windows Hardware Compatibility Publisher
However, I did not download it from the ATI site. If I go to the ATI site and download the driver from there (after entering my hardware and OS info) it wont install. Says I don't have the proper hardware.
Instead, I downloaded the driver from here: http://www.hardwareheaven.com/mobility-radeon-drivers-support/206549-ati-mobilit y-catalyst-11-7-display-drivers-notebooks-27-07-2011-a.html
However, the issue is BACK! I played through several (10+) levels in DoW2 without any issues and exceptional performance, but then the game started freezing for several seconds, the screen turned either black or gray, and then the game went on - but just had a blue screen again.
Sorting the driver was my last idea, I am fresh out now.

Issues with 'stuck' keys on new iMac (2011) with Aluminium KB

Hi All,
I've got a weird issue which I've seen on a few other forums... with no real fix. I've got a new 27" iMac (2011) and I have been using it happily for a few weeks. In the last two days, my keyboard has been going a little crazy.
Firstly I thought it funny that the 'option' key wouldn't work during bootup and later I discovered that once booted in OSX, i'd have 'sticky' keys or keys not registering when pressed.
When I reset the keyboard, everything works fine again.
Its becoming a problem as I cannot register an of the bootup options anymore and have reverted to using an old Remote to access my boot volume screen (holding the Menu button).
Has anyone seen this before and if so, what is the fix other than taking the keyboard back to the Mac store?
Thanks again,
Con

Hi Cabakroll,
Yeah, I've been doing regular updates (when available). I have actually figured out the issue... its a very weird fix mind you. I went back to see what changed the other day, when I first notice the issue. I recalled that I swapped out the batteries (the ones that came with it were running low for some reason), with rechargables.
Since then, the keyboard has been going crazy. I swapped the rechargables with normal batteries and bingo, problem fixed. :S
Thanks for getting back to me though.
Hopefully this helps others too.

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

Will time capsule support Airportextreme 802.11ac and an external hard drive on my iMac (late 2011) with Yosemite?

I want to set up a new Airport extreme 802.11ac with an external drive as a wireless back up for time capsule. I have an iMac (late 2011) running Yosemite. Will this work, and if so, what are the recommended external hard drives that work the best.
The rationale for not buying a time capsule is that I have had 2 hard drive failures and replacements on both my iMacs and I am afraid if the time capsule drive fails, it will be yet another apple hard drive that has failed on me. I currently back up on G drive external drives.

Apple does not make hard drives. They may be using the same drive that's in your G-Drives.
You can backup to an external drive connected to the newest AEBS via USB.

On iMac 2011 stopped working audio output.

On iMac 2011 stopped working audio output.
Is it possible to transmit a signal through the audio input?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Output jack Imac 2011 and Yosemite

Similar Messages

Maybe you are looking for