Output labview array to LED grid using DI/O on Elvis II??
I have been working on a project. I am attempting to use the DI/O on the ELvis II board to power an 10x6 LED grid similar
to the common-row cathode design here
http://www.appelsiini.net/2011/how-does-led-matrix-work
I have been attempting to generate block patterns using an array in labview, then somehow convert this array to show the block pattern on the grid. I was planning on using DI/O 0-5 to power the columns and DI/O 6-15 to power the rows. Is such a thing even possible? So far I have created a simple DAQ assistant to control the DI/O on the board and can control values that way. i was just interested in knowing if they can be controlled using a labview program.
Generate digital pulse from your D I/O to control the relay. With Digital High State, the mechanical arrangement will connect the COMM to "NO" .... and you will get your programmable Ground. (in your case NC is not necessary I hope)
The device is not so costly. you can purchase 4-5 number with your pocket money only. And It must be available to your nearby Electronics Shop. Use 1 for each line.
Attachments:
Relay.PNG 8 KB
Similar Messages
-
who knows how to output some text once labview detects something I want using pattern matching(Vision assistant)?
The text is something like"Yes, this is a coin"
Thanks!I attached a SubVI which I used to place an overlay next to a Pattern, found by a Pattern Match before:
As you can see, you simply pass the image reference and the Array of Matches to the VI along with the String you want to have as an overlay next to the Match.
I also modified your VI a bit, but didn't test it. I created an Array of clusters, each elment containing the template path along with the respective text.
Please note that this is just a hint!
Christian
Attachments:
suggestion.vi 146 KB
Overlay_Txt.vi 24 KB -
DAQ output to "Array to spreadhseet string"
Please see attached and advice what I am doing wrong. Cannot connect DAQ output to Array and write a file. Thanks for any help you can provide. This is in LabView 8.0.
Attachments:
Battery Test 2.vi 81 KBYou guys have been so helpful and I am amazed at your knowledge level. I have revised my program using your inputs. I have moved to one while loop and moved the report writing function outside the loop assuming that the report will be written once per Dennis' inputs, reduced the sampling size significantly per Ravens Fan's inputs and RTSLVU's inputs on getting rid of the connection errors.
One question I have is shouldn't this not be a 2-D output i.e. Voltage vs. Time? Please see attached and kindly offer any inputs you may have. I will appreciate anything you can comment on in programming or dressing up the front panel. My experience level with this is one month. Thank you so much.
Attachments:
Battery Test 3.vi 80 KB -
Pointer Manipulation: Wrap Around/Rollover/Rotation of LabVIEW Arrays and Waveforms???
I know we can't use pointers in LabVIEW, but I was wondering if there's any way we can do wrap-around [or "rollover," or "rotation"] of Array [or Waveform] values without having to make copies of the Array [or Waveform]?
For instance, suppose I'm reading one second's worth of data into a five second buffer. After the first five seconds, I've got
1st (1/5)th: 1st second's worth of data
2nd (1/5)th: 2nd second's worth of data
3rd (1/5)th: 3rd second's worth of data
4th (1/5)th: 4th second's worth of data
5th (1/5)th: 5th second's worth of data
Now I read the sixth second's worth of data, and overwrite the [original] first second, so that I have
1st (1/5)th: 6th second's worth of data
2nd (1/5)th: 2nd second's worth of data
3rd (1/5)th: 3rd second's worth of data
4th (1/5)th: 4th second's worth of data
5th (1/5)th: 5th second's worth of data
and in C, or C++, I'd just move the pointer up to the second (1/5)th of data, and start from there.
The LabVIEW Complex FFT is another place where this would be really useful. The Help File for the Complex FFT is in
Help | VI and Function Reference | Analyze VIs | Signal Processing VIs | Frequency Domain VIs | Complex FFT.
If you read the Help File, you see that LabVIEW returns an FFT with values in the range
[0, 2n - 1)
rather than the standard
[-n, n - 1)
i.e. LabVIEW takes the negative frequencies and tacks them on at the end, after the positive frequencies.
I'd like to be able to view my FFTs with the negative frequencies where they're supposed to be [i.e to the left of zero], and this would be SO easy if I could just move the underlying data pointer of the Waveform forward to the halfway point.
But, of course, in LabVIEW, I don't have pointers, so I was wondering: Are there any built-in VIs for Array [or Waveform] manipulation that will perform this sort of wrap-around [or "rollover," or "rotation"] of the data? If so, I couldn't find them. Ideally, such a VI would have two inputs: {old Array, new starting point}, and one output: {new Array}. Similarly with Waveforms, only you'd need to manipulate t0 as well.
Or do I have to copy the entire data set to a new Array [or Waveform] each time I reach the end of the buffer?
Thanks!> Ideally, such a VI would have two inputs: {old Array, new starting point}, and one output: {new Array}.
Have a look at "rotate 1D array" in the array palette (second row, fourth column).
(Sorry, I dont use waveform data).
LabVIEW Champion . Do more with less code and in less time . -
How do we use if statement in labview?moreover can i use if statement inside for loop?
how do we use if statement in labview?moreover can i use if statement inside for loop?
The if statement in LabVIEW is the Case structure. You can find that on the Structures palette right next to the For Loop. If you're still on the same subject about terminating a for loop early, then what you do is enclose your functions inside the loop with a case statment and make one of the case's empty except for one or more constants that you might have to wire. Hopefully, the attached picture will explain what I mean. Also, as I mentioned in one of your other posts, I think this technique is not as good as using a while loop. The array in the attached example is the same size no matter what and you may have to handle stripping extra or invalid elements.
Attachments:
For_Loop_with_Case.jpg 21 KB -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti -
Display error message in ALV grid using OOPS
Hi,
I have a requirement to display report in ALV. I have created ALV grid using OOPS with three editable cells and 1 button on toolbar. When user enter values in Ediatble cell and click on the Toolbar button, sales order item should be assigned to contract.
When the user select the row and click on toolbar button, a salesorder item should be assigned to contract and i am using BAPI and fine with BAPI. All the error message should be displayed in a popup and the corresponding failed row should change its color .
Once the user identified the failed row, he can edit the value in the ediatble cells and should reprocess in the same screen ( without going back to selection screen).
To display POP Up, I am using FM BAL_LOG_CREATE, BAL_LOG_MSG_ADD, BAL_DSP_PROFILE_NO_TREE_GET, BAL_CNTL_CREATE.
by using above 4 FM , i can display POP UP. but i cannot change the color of the failed row.
Once I identified the failed row and reprocess from the same screen , I am successful in processing the failed row, but my error log still has the reprocessed row as failed row because, error log is not refreshing.
Please suggest me how to clear error log which was created by using the above FM's and change the color of the failed row .
Thanks in AdvanceHi
Please suggest me how to clear error log which was created by using the above FM's....
U can use BAL_LOG_REFRESH
....and change the color of the failed row
You need to insert a new field for Colour Attributes in your output table and input its name in the layout structure:
IS_LAYOUT-INFO_FNAME = <field name for colour>
The field has to be a CHAR 3 and its value can be -
> Cxy
C is a constant
x is the colour number (from 1 to 9)
y is intensified (0 = off, 1 = on)
After changing the value of output table you need to run the method REFRESH_TABLE_DISPLAY for refreshing the output
Max -
Sub total in ALV GRID using oops concept
Hi,
If Plant (VBAP-WERKS) is not the same for all items on a Sales Order (VBAK-VBELN is the same for al items) then create a separate line on the report for each different plant specified in the line items. Copy all fields from the original order line except for plant and Net Value. Net Value should be the total of item Net Values for all items with the same plant in the order.
Example:
Data:
Order---- Item- Plant- Net Value---
123---- 010- 3467- 100.00---
123---- 020- 7865- 50.00---
123---- 030- 3467- 80.50---
Report:
Order- Plant- Net Value---
123- 3467- 180.50---
123- 7865- 50.00----
I need to dispaly the Report format in ALV Grid using oops concept...
no need of calling any function modules.
Regards,
NithyaHi
Here is example code
This is the method to be called:
get_subtotals
Use
Returns the current subtotals of the ALV Grid Control. Having created totals for at least one column, users can calculate at most nine subtotals. The list is sorted by the values of one or several columns (called the subtotals column). If a value is changed in the subtotals column, the subtotal is displayed (this is also referred to as control level change).
Integration
Before you access the subtotals value, you use the method get_sort_criteria to get the sort table . One row of this table describes properties of a column in the output table.
If the field SUBTOT is set for a column in this table, the column is a subtotals column.
The field SPOS then indicates at which level (see below) the subtotal has been calculated.
The field FIELDNAME contains the name of the subtotals column in the output table.
Based on this information, you specifically access the values of the tables passed (using reference variables COLLECT01 to COLLECT09).
Features
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->get_subtotals
IMPORTING
EP_COLLECT00 = <reference variable of type REF TO DATA>
EP_COLLECT01 = <reference variable of type REF TO DATA>
EP_COLLECT02 = <reference variable of type REF TO DATA>
EP_COLLECT03 = <reference variable of type REF TO DATA>
EP_COLLECT04 = <reference variable of type REF TO DATA>
EP_COLLECT05 = <reference variable of type REF TO DATA>
EP_COLLECT06 = <reference variable of type REF TO DATA>
EP_COLLECT07 = <reference variable of type REF TO DATA>
EP_COLLECT08 = <reference variable of type REF TO DATA>
EP_COLLECT09 = <reference variable of type REF TO DATA>
ET_GROUPLEVELS = <ínternal table of type LVC_T_GRPL>.
In order to access the values of EP_COLLECT00 to EP_COLLECT09, you use ASSIGN to dereference the relevant reference variable in a field symbol of your output table type (see below).
Parameters
Meaning
EP_COLLECT00
Points to the totals line. Since there is only one totals line which, in addition, has a unique totalling area, no further information is available for this table in table ET_GROUPLEVELS.
get_subtotals
EP_COLLECT01 to EP_COLLECT09
Point to the subtotals line. For each subtotals level, there is one reference variable. Each of these variables points to an internal table that has the type of the output table. EP_COLLECT01 points to the subtotal at the hightest level, while EP_COLLECT02 points to the subtotal at the second highest level, and so on. The levels are derived from the sort priority (field SPOS in the sort table ). The column by which the data was sorted first, is the highest subtotals level.
ET_GROUPLEVELS
Manages all indexes for the individual control levels. The fields of the table have the following meaning:
INDEX_FROM, INDEX_TO: Rows of the output table for which the subtotal was created
LEVEL: Subtotals level (see above)
COUNTER: Number of rows for which the subtotal was created
COMPRESS: For this subtotals line, the user has hidden the associated rows.
COLLECT: Indicates the subtotals table (01-09) in which the values are stored
For an overview, see Methods of Class CL_GUI_ALV_GRID
Activities -
How do I pass a 1D LabView array as a pointer to an array in a C DLL?
Hello,
I am trying to pass a 1D Labview array of DOUBLE to a C DLL which is expecting a pointer to an array of DOUBLE. I have read that LabView stores arrays as a pointer to a pointer and that the first element of a LabView array is actually the size of the array. So I think my question is then how do I dereference the first pointer and pass in a pointer which points to the second element in the array?
Any thoughts out there?
Thanks!Hi justyou,
There are many, many resources on this topic, so I will guide you to the two most useful ones:
The "Call DLL.vi" example that ships with LabVIEW explains how to use almost any data type when executing DLLs. The "Call DLL.vi" can be found by browsing the Example Finder.
Integrating DLLs. This page is the portal for DLL interation related resources. Read the tutorials and try the examples...
This should give you some ideas.
Have fun!
- Philip Courtois, Thinkbot Solutions -
LabVIEW memory management question:
Question Part 1: When I write a C .dll that takes a LabVIEW array,
LabVIEW passes a pointer into LabVIEW's memory to the array to C.
Can C return the pointer to me (e.g., not the array I passed in, but
it's memory location)?
i.e.: void GetNativeMemoryPointer(float *pointer, float *array);
where *array is my input array, and GetNativeMemoryPointer returns the pointer to this array on *pointer.
Question Part 2: What issues will I run in to if I pass this returned
pointer to another .dll call. What if this .dll call is in
.NET?
Concerns: How does LabVIEW hold this array in memory? When I call
GetNativeMemoryPointer, does LabVIEW make a copy and send this a
pointer to the copy to the dll, or is the pointer to the
original? Will LabVIEW ever "move" the original, e.g., will my
pointer become invalid after some time?
Joe Gerhardstein
Averna Test Systems
Certified LabVIEW Architect
http://www.averna.comPart 1: I must confess that I don't understand your question. Pointers and arrays are very closely related in C so I'm not following the sequence. So I don't know if the following applies, but here is a possible answer...
The pointer to a LV array that is passed to a call library node is valid ONLY during that call. Once the call to the DLL completes, you should consider that pointer value invalid. You can, of course, make a copy of the array and return a pointer to your copy - but LV won't know what it is. It definately won't show up in LV as an array. However, you can pass that pointer to the copy around to other DLLs as much as you want.
* Don't forget to free the copy. If you make a copy of the array, you own it - therefore you must free the memory of the copy at some point *
Part 2: Easier to answer.
* If you want LV to convert your pointer to a LV data type (such as a LV array): Take a look at page 2-4 in the "Using External Code in LabVIEW". In almost all cases we do not support pointers. The only exceptions are the ones shown in the Call Library Node configuration. For arrays, notice that if you want to return an array to LV, we have our own defined data types for this - read up on the CIN section for more information.
* If you want to return a pointer than LV just messages to other DLLs: No problem. Put the parameter to the routine as a pointer to integer (or a return value of type int). Thus your pointer is an integer as far as LV is concerned. When you pass it to another DLL, we'll pass the exact same value to the DLL - thus the pointer is never modified or the data touched.
Did this help?
Message Edited by Lycangeek on 08-10-2005 02:12 PM
Brian Tyler
http://detritus.blogs.com/lycangeek -
HI all,
Is it necessary to use container for ALV grid using classes.If not then please help me with a sample code.REPORT z_alv_using_oops_conepts MESSAGE-ID z_OOPS.
TABLES: ekko, ekpo.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA: ok_code TYPE sy-ucomm,
gx_fcat1 TYPE lvc_s_fcat,
gt_fcat1 TYPE STANDARD TABLE OF lvc_s_fcat,
gx_fcat2 TYPE lvc_s_fcat,
gt_fcat2 TYPE STANDARD TABLE OF lvc_s_fcat,
gx_layout1 TYPE lvc_s_layo,
gx_layout2 TYPE lvc_s_layo,
gx_variant TYPE disvariant,
g_custom_container1 TYPE REF TO cl_gui_custom_container,
g_custom_container2 TYPE REF TO cl_gui_custom_container,
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
g_container1 TYPE scrfname VALUE 'MAIN_REPORT_LIST',
g_container2 TYPE scrfname VALUE 'SECOND_REPORT_LIST',
gv_event_rec1 TYPE REF TO lcl_event_receiver,
gv_event_rec2 TYPE REF TO lcl_event_receiver,
gv_repid TYPE sy-repid,
gt_final1 TYPE STANDARD TABLE OF ekko,
gt_final2 TYPE STANDARD TABLE OF ekpo,
gt_final3 TYPE STANDARD TABLE OF ekpo,
gx_final TYPE ekko,
gx_final1 TYPE ekpo.
INITIALIZATION.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK blk3 WITH FRAME .
SELECT-OPTIONS:
s_ebeln FOR ekko-ebeln obligatory,
s_ebelp FOR ekpo-ebelp,
s_bukrs FOR ekko-bukrs,
s_bsart FOR ekko-bsart.
SELECTION-SCREEN END OF BLOCK blk3.
LOCAL CLASSES: Definition
*===============================================================
class lcl_event_receiver: local class to
define and handle own functions.
Definition:
~~~~~~~~~~~
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
hotspot_click1
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id,
hotspot_click2
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD hotspot_click1.
DATA: lv_tabix TYPE sy-tabix,
lx_final TYPE ekko.
READ TABLE gt_final1 INTO gx_final INDEX e_row_id.
IF sy-subrc = 0.
gt_final3 = gt_final2.
DELETE gt_final3 WHERE ebeln NE gx_final-ebeln.
IF NOT g_custom_container2 IS INITIAL.
CALL METHOD grid2->refresh_table_display.
CALL METHOD grid1->refresh_table_display.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
LEAVE LIST-PROCESSING.
ENDIF.
ENDMETHOD. "hotspot_click1
METHOD hotspot_click2.
READ TABLE gt_final3 INTO gx_final1 INDEX e_row_id.
IF sy-subrc = 0.
SET PARAMETER ID 'BES' FIELD gx_final-ebeln.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDMETHOD. "button_click1
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
START-OF-SELECTION *
START-OF-SELECTION.
SELECT * FROM ekko INTO TABLE gt_final1 WHERE ebeln IN s_ebeln
AND bukrs IN s_bukrs
AND bsart IN s_bsart.
IF sy-subrc = 0.
SELECT * FROM ekpo INTO TABLE gt_final2 FOR ALL ENTRIES IN gt_final1
WHERE ebeln = gt_final1-ebeln
AND ebelp IN s_ebelp.
IF sy-subrc = 0.
gt_final3 = gt_final2.
ENDIF.
ENDIF.
PERFORM sub_get_fieldcat CHANGING gt_fcat1.
PERFORM sub_get_fieldcat CHANGING gt_fcat2.
END-OF-SELECTION *
END-OF-SELECTION.
PERFORM display_process.
CALL SCREEN 9000.
MODULE pbo OUTPUT
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
gx_layout1-grid_title = 'Purchase Order Header'.
gx_layout1-zebra = 'X'.
gx_layout1-info_fname = 'COLOR_LINE'.
gx_layout1-sel_mode = 'X'.
gx_layout2-grid_title = 'Purchase Order Items'.
gx_layout2-zebra = 'X'.
gx_layout1-stylefname = 'CB'.
gs_layout1-excp_led = gc_check.
gs_layout1-excp_group = gc_check.
gv_repid = sy-repid.
gx_variant-report = gv_repid.
READ TABLE gt_final1 INTO gx_final INDEX 1.
IF sy-subrc = 0.
DELETE gt_final3 WHERE ebeln NE gx_final-ebeln.
ENDIF.
IF g_custom_container1 IS INITIAL.
CREATE OBJECT g_custom_container1
EXPORTING
container_name = g_container1.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container1.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_layout = gx_layout1
is_variant = gx_variant
i_save = 'U'
i_default = 'X'
i_structure_name = 'EKKO'
CHANGING
it_outtab = gt_final1
it_fieldcatalog = gt_fcat1.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDIF.
IF g_custom_container2 IS INITIAL.
CREATE OBJECT g_custom_container2
EXPORTING
container_name = g_container2.
CREATE OBJECT grid2
EXPORTING
i_parent = g_custom_container2.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
is_layout = gx_layout2
is_variant = gx_variant
i_save = 'U'
i_default = 'X'
i_structure_name = 'EKPO'
CHANGING
it_outtab = gt_final3
it_fieldcatalog = gt_fcat2.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid2.
ENDIF.
CREATE OBJECT gv_event_rec1.
SET HANDLER gv_event_rec1->hotspot_click1 FOR grid1.
CREATE OBJECT gv_event_rec2.
SET HANDLER gv_event_rec1->hotspot_click2 FOR grid2.
IF gt_final2 IS INITIAL.
MESSAGE i000 WITH 'No Items exist for the Purchase Order'.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
To react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD grid1->free.
CALL METHOD grid2->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = gv_repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(009).
ENDIF.
ENDFORM. "EXIT_PROGRAM
*& Form display_process
text
--> p1 text
<-- p2 text
FORM display_process .
DATA: a LIKE sy-ucomm.
DO 100 TIMES.
DO 300 TIMES.
GET TIME.
ENDDO.
a(3) = sy-index.a+3 = '%'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = sy-index
text = a.
ENDDO.
ENDFORM. " display_process
*& Form sub_get_fieldcat
text
<--P_GT_FCAT1 text
FORM sub_get_fieldcat CHANGING lt_fcat TYPE lvc_t_fcat.
gx_fcat1-fieldname = 'EBELN'.
gx_fcat1-tabname = 'gt_final1'.
gx_fcat1-hotspot = 'X'.
APPEND gx_fcat1 TO lt_fcat.
ENDFORM. " sub_get_fieldcat -
ALV Grid Using Methods-handle_top_of_page
riends please explain how to resolve the below issue.
I am working on ALV Grid using methods & trying to display
page heading using handle_top_of_page event.
I have defined & implemented the above method and in the implementation I have
given a write statement, which has to be displayed on the top of page.
I have also set the handler for top of page.
The program does not have any errors, but top of page event is not triggered, what might be the problem.
Regards,
UshaHi,
Check this code
Class definition :
CLASS v_lcl_event_receiver DEFINITION
CLASS v_lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_print_top_of_page FOR EVENT print_top_of_page OF
cl_gui_alv_grid,
handle_top_of_page FOR EVENT top_of_page OF
cl_gui_alv_grid.
ENDCLASS.
CLASS V_LCL_EVENT_RECEIVER IMPLEMENTATION
CLASS v_lcl_event_receiver IMPLEMENTATION.
METHOD handle_print_top_of_page.
IF sy-pagno = 1.
PERFORM top_of_page.
ENDIF.
ENDMETHOD.
METHOD handle_top_of_page.
PERFORM top_of_page.
ENDMETHOD.
ENDCLASS.
DATA: v_event_receiver TYPE REF TO v_lcl_event_receiver.
FORM top_of_page.
WRITE: text-020,
ENDFORM. " top_of_page
In PBo of the screen
DATA: v_split TYPE REF TO cl_gui_easy_splitter_container,
v_contnr_top TYPE REF TO cl_gui_container,
v_contnr_bot TYPE REF TO cl_gui_container,
v_grid_02 TYPE REF TO cl_gui_alv_grid,
v_html TYPE REF TO cl_dd_document,
v_text20(255) TYPE c,
v_text16(255) TYPE c,
FORM f9000_objects_create.
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
Create a container
CREATE OBJECT o_dockingcontainer
EXPORTING
ratio = '95'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01."Error in creating Docking container
LEAVE LIST-PROCESSING.
ENDIF.
CREATE OBJECT v_split
EXPORTING
parent = o_dockingcontainer
ORIENTATION = 0
sash_position = 25
with_border = 0
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
others = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01."Error in creating Docking container
LEAVE LIST-PROCESSING.
ENDIF.
Get the containers of the splitter control
v_contnr_top = v_split->top_left_container.
v_contnr_bot = v_split->bottom_right_container.
CREATE OBJECT o_alvgrid
EXPORTING
i_parent = o_dockingcontainer.
Create an instance of alv control
CREATE OBJECT o_alvgrid
EXPORTING i_parent = v_contnr_bot.
Object for display of selection parameters in HTML top container
CREATE OBJECT v_html
EXPORTING
style = 'ALV_GRID'.
Must be after the SET HANDLER for TOP_OF_PAGE and foreground only
CALL METHOD o_alvgrid->list_processing_events
EXPORTING i_event_name = 'TOP_OF_PAGE'
i_dyndoc_id = v_html.
v_text20 = text-020(summary Record counts)Any text.
CALL METHOD v_html->add_gap
EXPORTING
width = 120.
CALL METHOD v_html->add_text
EXPORTING
text = v_text20.
CALL METHOD v_html->new_line.
Display Text-016
v_text16 = text-016.
CALL METHOD v_html->add_gap
EXPORTING
width = 1.
CALL METHOD v_html->add_text
EXPORTING
text = v_text16.
v_text16 = v_sap_recon.
CALL METHOD v_html->add_gap
EXPORTING
width = 1.
CALL METHOD v_html->add_text
EXPORTING
text = v_text16.
CALL METHOD v_html->new_line.
Display the data
CALL METHOD v_html->display_document
EXPORTING
parent = v_contnr_top.
Handle the event
CALL METHOD o_alvgrid->list_processing_events
EXPORTING i_event_name = 'PRINT_TOP_OF_PAGE'.
IN PBO while populating in the output table
FORM f9004_display_data TABLES p_report_tab
p_fieldcat.
CALL METHOD o_alvgrid->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = c_a
is_layout = w_layout
CHANGING
it_outtab = p_report_tab[]
it_fieldcatalog = p_fieldcat[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i000 WITH text-e06."Error in ALV report display
LEAVE LIST-PROCESSING.
ENDIF.
Create object
IF v_event_receiver IS INITIAL.
CREATE OBJECT v_event_receiver.
ENDIF.
SET HANDLER v_event_receiver->handle_print_top_of_page FOR o_alvgrid.
SET HANDLER v_event_receiver->handle_top_of_page FOR o_alvgrid.
Hope this helps. -
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark -
I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks
Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden -
How GET Output to Excel with Oracle9i Report using OC4J
how GET Output to Excel with Oracle9i Report using OC4J.
I FINISHED THE SETPS CONCIDERING THE JSP CODE NEEDED TO GET THE EXCEL OUTPUT ON LOCAL MACHINE.
I NEED TO PUBLISH THIS REPORT THROUGH APPLICATION SERVER.
THE QUESTION IS:
1- HOW TO START AN OC4J INSTANCE FROM ORACLE 9I DS FOR THIS REPORT?
2- WHERE (PATH) TO PUBLISH THE REPORT ON THE APPLICATION SERVER?
3- WHAT IS THE DEFAULT URL TO RUN THIS REPORT AND WHERE TO PUT IT?
4- HOW TO MAKE MAPPING FOR DIRECOTRY PATH TO TRANSLATED AS URL FOR THIS REPORT?
5- IF ANY ONE CAN GIVE ME THE FULL CODE TO RUN AND CALL SIMPLE JSP REPORT TO BE VIED IN INTERNET EXPLORER.
THANK YOUHi,
I can't answer to all your questions, however I can tell you that:
2) The directory where to put the report file is specifiend in a file named
<serverName>.conf
in the sourceDire property
<property name="sourceDir" value="/directory/dove/mettere/i/report"/>
that you can find under ORACLE_HOME/reports/conf
3) The URL is
http://<server IAS address>:<port number>/<jsp file path>/<repName>.jsp?server=<report server name>&userid=<user>/<pwd>@<DB conn string>[&<param>=<valore>[&...]]
5) In IE you have only to set the previous URL in the address bar.
Hope this helps you
Bye
Raffy
Maybe you are looking for
-
My Skype number is calling people
Hi, I got many complaints that my number is bothering people repeatedly for the last 2 weeks. Is there something I can do?
-
hi HOW TO CONVERT DATE TYPE TO TIMESTAMP TYPE? PLS GIVE EXAMPLE
-
Personalized mail forms in portal
hi gurus, May i know what's the path to view my personalzed mail forms in the pcui/portal? Is it under the Channels tab? and how do i personalize the forms in pcui/portal?
-
is there a way to set JTable's column color ?
-
Why won't my MacBook Pro let me copy and paste files, particularly from my external hard drives (to each other) and (to my computer). They are both new and it shouldn't be a problem. Please help!