Output levels

I've had a hub fitted in my car so I can connect my ipod as well as have the radio and CD. The ipod connects via the main socket at the bottom rather than the headphone jack.
This works fine except that the output level of the ipod is so much lower than the other sources that I have to turn the volume up really high and then I get all the background hum and hiss.
Is there any way to boost the output level so that I can get a cleaner sound?
Thanks
David

i don't know if you would want to but when you right click on a song>Get info> from there you can edit the volume of a song and increase it if you like by 100%.
*you can do this for multiple songs*
But occasionally the quality is decreased (although you can always edit back to the original levels)
Alex

Similar Messages

  • System Sound Output Level Reset After Reboot ?

    Whenever my iMac Core Duo is rebooted, system sound output level always get reset to value 0.56 (-24dB) as shown in utility "/Applications/Utilities/Audio Midi Setup". I have to increase the system sound output level to desired value of 0.75(-12.75dB) to match with built-in amplifier of Altec Lansing FX6021 speaker system. The desired setting lasts until next reboot. Is there any way I can fix the system sound output level at desired level between reboots ? Why I have to be involved in such constant struggle with the iMac for such simple audio configuration ?
    Audio Hijack Pro 2.6.7 wihtout Soundflower 1.1 virtual audio device has been installed. Audio hijack function of this utility has not been used at all. Thank you for any pointer.

    Thanks for the confirmation that my iMac is not an isolated case. In case you are not willing to use Audio Hijack Pro, just use Automator to create an Automator script to set system volume (In Automator's Library plane: Applications>System>Set System Volume) and save it as application. Set this application as Login Items for your account through following menu path:
    System Preferences>Accounts>Login Items. Whenever you login with this account, the script will be invoked automatically by Mac OS X and sound levels for output, input and alert will be set to user preferred levels. For older versions of Mac OS X (10.3.9 and earlier) without Automator, same effect can be achieved with Apple Script, use Apple Script Editor instead of Automator to create Apple Script and set it as Login Items. This workaround has been working consistently on my iMac Intel Core Duo.
    iMac Intel Core Duo 20" 2 GHz 2 GB RAM   Mac OS X (10.4.7)   Firewire External Drive, Belkin Wireless Router, iPod nano

  • Bouncing in Logic, Suppressed and Quiet Volume Output Levels

    So I've just finished mixing a song from a friend's band's performance and it sounds great. The Output is hot, usually staying upwards of -3.5 decibels and less than 0 thanks to the compressor/limiter plugin and some basic volume automation. I have the computer output levels set at halfway and the master logic output set at half as well, and the mix is slightly louder than I would prefer comfort-wise in my headphones. By all means, my bounce out of logic and onto my desktop should be at a similar volume level, but it is not. In comparison to my songs in my itunes collection, the output is very significantly affected and diminished. A listener would have to turn the volume up on their stereo or computer to reach an equal volume level as their other music.
    I have tried bouncing with normalization turned on and off and have bounced out both aiff and m4a files. My Compressor/limiter plugin is on, but the output never reaches clipping levels as the plugin seems to be working as it should. I have played my bounces in both Itunes (preamp in eq is at half as well) and quicktime with the volumes set at halfway, so it's not a blockhead issue of not having my volume up in those programs. Something is seriously up here, since I have tried many possibilities, my output levels are not requiring a reduction by a plugin and I have not come to a satisfying conclusion.
    My overall questions are: 1) Would could possibly explain what's amiss here since nothing theoretically should be. 2) What explains the difference between the output I hear playing my mix within logic and playing the bounce in other programs such as I tunes (again I did not bonehead here and leave my volume or eq level set low in my Itunes, nor did I normalize my bounce). 3) Should I just send my Mix to an auxillary "master" channel strip, record as audio, and export it as is? I would prefer it not have to come to this. 4) Is it possible that one cannot truly master at a professional level in logic? Do I need to get some expensive plugins in addition, or perhaps an external mastering-specific program?
    I would sincerely appreciate any informative answers here, Thanks

    , and large reason for that is the fact that it always seems to lack any sort of conclusive solution
    I think it always yields a conclusive solution.
    After all, if my question was "I need to be able to play the guitar to put some guitar down" most answers would be either "You should get a guitarist who has the skills already" or "Learn to play the guitar".
    A forum post is not going to suddenly impart the skills necessary to get commercial sounding mixes instantly - the commercial mixers charge a fortune for their work, largely because they are good at it!
    If a mix sounds very loud while I'm bouncing in realtime, what can possibly explain a significant volume reduction in the sound file that comes out the other end onto my desktop?
    You are comparing two different things. When you are hearing it in Logic, there is a playback level going through your interface and to your speakers. When you play the same audio through iTunes, you are playing through an entirely different chain - iTunes, with it's own volume control, through the system with it's own volume control, and so on. Also in iTunes, often people have all kindsof stuff switched on like EQ settings, or the audio leveller function, which is further going to change stuff.
    Just remember that the "volume" you hear is more dependent on how loud your are setting various volume controls than what the contents of the file are. If you're not sure on this stuff, then probably the best way to compare your mixes to commercial stuff is to burn them to CD and play them back on the same system.
    Again, I have no need to normalize at all since my mix has a loud average volume throughout without spilling over into clipping territory on the peaks.
    Are you using metering? You'd probably find it useful to compare average and peak levels on your mixes, compared to average and peak levels on commercial mixes. I think you'd be surprised how "loud" commercial mixes really are - many don't have more than a few dB of dynamic range - at least in the regular pop/rock/commercial categories.
    Presumably, I have exercised all the skill necessary to get a satisfyingly loud mix. If it (the mix) came out sounding exactly as it does in logic it would be louder than I would need it to be.
    It's difficult to know what you are doing, but as long as you are not clipping your outputs, what Logic writes into the audio file is exactly what you are hearing when bouncing. How you then play the file back, in a completely different set of applications, is not going to let you listen at the exact same level unless you set all the affecting volume controls to match everything else. Remember, Logic is talking directly to your audio interface, not playing through OSX's system output.
    So, divide your situation into two areas - am I getting my mix to the relative levels I want, and how am I playing back and hearing that mix, and go from there.

  • Is it possible to get the current output level??

    Is it possible to get the audio output level of a stream (in this case a mic input going through GSM compression to an RTP socket).
    I would like a couple of volume bars in my application so people can see how loudly they are talking.
    If anyone has any ideas on how to achieve this it would be much appreciated!
    Thanks,
    Dex

    You want a volumeter, i am also interesting in it

  • Sound output level low.

    I have a newer 5th generation Ipod. My old Ipod had and output level adjustment. When I dock my new Ipod I have to turn the volume on my tv up rediculously loud to hear it. Is there any way to adjust the output level??

    Go to your Ipod Settings> Set Sound Check to = ON.
    It a good Idea to also set Sound Check to = ON in your
    ITunes program.>
    Go to ITunes; Edit; Preferences and then select Playback>
    Enable Sound Check;
    Download or copy new program from CD and see if your levels are OK;
    Hope this helps?
    Compaq PC / 1GB Ipod Nano & 80GB Video   Windows XP   Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

  • How to see output levels in new I-tunes?

    Hello, in the old I-tunes, I used to be able to see the output levels of the files in the box where the title appears. This really helped get uniform levels between all the files. In the I-tunes I just downloaded yesterday, that option seems to be gone. Does anyone know where it went/how to access it?

    Sorry, but that feature was removed in iTunes 11.
    Regards.

  • Can setting power output level at 65mw cause a one year old router to fail?

    Recently my router WRT54GS v2.1 that is only one year old but has been in 24/7 service failed and the technician that worked on it said the failure was probably due to the power output level being set at 65mw and other firmware settings ( particulars available ) that had been used but were working fine to provide wireless service. The output was fed to a Smart Amp 500mw power amplifier with Automatic Gain Control then through 30 feet of 400 cable to an Omni-directional 14 dbi antenna. Coincidentally the power amp seemed to fail at the same time. The maximum input to the Smart Amp which has AGC is 23dBm (200mw) max. Is it possible that the firmware configuration and the 65mw setting were responsible for the failure of either or both devices?

    If the ABS and Router/Modem are both giving IP Addresses out, (that's what tells everything on the Network where to send/get stuff to/from), then everything gets confused... a bit like trying to get US Mail delivered when your street has 2 names, and your abode has the same address as other houses on the block!
    You just want the ABS to pass on the IP addies that the Router hands out, and not try to do it itself.
    If your base station is connected to a router or other network device that is using NAT to share a single Internet connection with multiple computers on your network, and you are using DHCP to provide private IP addresses, you need to turn off NAT and DHCP on the AirPort base station.
    Most networks need only one device using NAT and DHCP to provide IP addresses.
    To turn off NAT and DHCP:
    Open AirPort Admin Utility, select your base station, and click Configure.
    Click Network and deselect the "Distribute IP addresses" checkbox.
    If your base station supports Power over Ethernet (PoE), by default the "Distribute IP addresses" checkbox is not selected, and the base station is not using NAT or DHCP.
    With NAT and DHCP turned off, the base station acts as a simple bridge between the wired and wireless computers on the network.

  • Surround encoder lowers output level of exported .wavs??

    I've been playing with the surround encoder for awhile now , in Audition 1.0 and the free trial version of 3.0.  I record and export 6-channel sessions as
    either interleaved wav or 6 mono wavs.  When I was using Audition 1.0, there was no change in channel level in the exported file versus the original recording level, i.e., if the 'Left front' channel peaks at 0dBFS during recording, so does the Left front channel of the exported file, when I re-open it in Audition or Audacity.
    But with Audition 3.0, something odd is happening.  All of the exported channels are -3dB or so compared to their original recording level!  I.e., a track that originally peaked at 0dBFS , peaks at about -3dB FS when I reopen it after export.
    I have checked that the output levels for the Surround Encoder and are all at max for each channel (and 0dB gain/cut for the master output slider).  I don''t see anything in the preference settings that would account for this,  I happens regardless of exporting as interleaved waved or 6 mono wavs.  It does NOT  happen if I record and save 2-channel audio in Edit View.
    Any ideas?  Did something about surround encoder export change  between Audition 1.0 and 3.0?

    krabapple wrote:
     I don''t see anything in the preference settings that would account for this,  I happens regardless of exporting as interleaved waved or 6 mono wavs.  It does NOT  happen if I record and save 2-channel audio in Edit View. 
    Any ideas?  Did something about surround encoder export change  between Audition 1.0 and 3.0?
    No, but the mixer did. I haven't tried this, but if you go to Preferences>Multitrack and change the pan law default setting from -3dB center to L/R cut Log, the chances are that your mix will come out 3dB higher.

  • Calibrating Agilent N5183 Signal generator for specific output level

    Hi,
    Newbie to labview enviornment!  I am trying to write a VI to calibrate Agilent N5183 to a specific output.  For e.g. if I want to have -4.5 dBm output from my setup (as displayed on my power meter) I will have to set the sig gen to say 7dBm taking into account my losses etc.
    Any pointers how do I start tacking this?  I think I will have to create a while loop to check power levels, however I do not know how to increment and decrement the sig gen amplitude and stop at the desired level!
    Thanks in advance for any help.
    PS: Using Labview 2013, on win XP machine!
    Solved!
    Go to Solution.

    mkossmann wrote:
    3. Adjust pout to sign Gen to desired level while monitoring power on power meter
    Why do you need that step at all ?  Its not clear from your description what makes the difference between the readout of the power meter and the output level setting of the sigGen.
    I have had to do this plenty of times.  Especially in the RF realm, you want your tests to have a certain power level AT THE UUT.  So you have to adjust your signal generator to overcome the losses in the couplers, cables, etc.
    For this, all you need to do is set your signal generator to the level you want.  Then measure with the power meter.  Subtract the measured from the desired and add that much more to the set output.  Repeat as needed.  I would recommend using a conditional FOR loop so you can easily set a limit to how many times you adjust (I have been in endless loops due to weird situations here).
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • AppleTV distorts sound, output level too high

    Hi
    I have a problem and have already tried a number of solutions.
    My AppleTV sound is distorted, due to the output level being too high. Initially I used the TVs headset jack-connector for connecting to my amp, and lowering the output level from the TV didn't work. It is distorted from the source (AppleTV)
    Now I have bought a seperate D/A converter for connecting the AppleTVs optical output directly to my analog amplifier. Still doesn't work. Sound still distorted.
    When playing music through AppleTV, I have the ability to adjust the volume level on the source device. And then everything is OK.
    But airplaying video/youtube from my ipad (I do that a lot - playing kiddie-flics for my toddler) there is no option to reduce the sound level.
    Effectively most content airplayed will be distorted - and I am sick of it. I have a high-end amp and speakers. I do not expect audiophile quality from the AppleTV. Still I didn't expect defective/destroyed sound... And no, the AMP isn't the issue, as this has been replaced as well, due to an upgrade. Same issue on both AMPs.
    Any good suggestions? Or should I simply accept that the design criterias for the AppleTV doesn't involve a reasonable audio quality? Or is my particular product defective?
    Thanks,
    Claus

    If the audio is clipped there's not much you can do other than re-record. But there is this: http://www.izotope.com/products/audio/RX/
    -DH

  • STB QIP2500-3 audio output level

    There is a noticeable difference between the audio output level (loudness) of the RF (ch3/4) and the baseband (L/R stereo) on the STB QIP2500-3. The RF is louder than the baseband. Is there any way to increase the output level of the baseband L/R stereo level, thanks.

    Go to the Main Menu by pressing 'Menu' key on remote, Settings, Audio, Make sure the 'Set Top Box Volume' is at its max.  Audio format can be put on 'Stereo'.  Volume control can be put on 'Fixed'.  Finally set the Dynamic Range to 'Heavy'.  The following settings usually give the best audio output. 
    Javier
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

  • Does Logic have db scales markers on the output levels or individual chanels?

    I am looking to buy Logic Pro or Pro logic.  Does Logic have VU markers on the output levels, or individual chanels. I use this as a guide to mixing as I know that bass should be at -6db, lead vox at -6db at the output meter on a traditional desk. I can see that Logic does has levels for each chanel but no scale next to it. Is this an option that can be turned on and off?
    I can see that it registers the peak level, but I need to see the average level. Looking at pictures and clips on you tube aren't enough to confirm my answer. I know that Pro Tools has this which can be switch on or off. Does Logic?
    Hope my question makes sense. thanks in advance.

    Ben Collier wrote:
    Anchor points!
    What's happened to those? They are/were brilliant and worked perfectly in 7 & 8. If you set them up in 9 it remembers it when you are in the sample editor, but if you then copy that audio file (such as a cresc. cymbal) with said anchor point to another part of the song, the anchor point is forgotten, and if just gives you the start of the audio file as the reference point. Am I the only one with this problem?
    Not seeing this - this works just as before here . .

  • Entry&Approval - Data entry into Output level Dimension

    Hi Guys,
    There is a project situation, the Client needs to insert data into a metric in both input level and output level of dimension, but when we created the metric set, the tool only provides the dimension Input level.
    Is there any way to display also the Dimension Output level? (This variable will not be consolidated).
    If not, would you know a workaround?
    Bst Rgrds, Vitoriano

    Hi Praveen,
    You are right. As long as that information appears in the CONSOLINFO you are able to enter data with E&A at all levels of the dimension for that particular measure.
    You can change this directly in this document, it should be no problem. Nevertheless, when using Cubebuilder or the BICA, you have the option while creating a metric to define the dimension consolidation. By default it is SUM, but you can change it to ENTER, and that should create the entries in CONSOLINFO like what you describe above. This means that selecting this option for the dimension consolidation will enable all levels to be selected and planned using E&A.
    Best regards!
    Ricardo Vieira

  • Limiting Output Levels (as in Photoshop)

    Hi, I'm submitting my work to several places that require a limit on the output levels of my photographs. Essentially I need to ensure my maximum output level is 252 (instead of 255) and the minimum 3 (instead of 0). Photoshop allows this very simply and easily with the levels palette, but it would seem as though this isn't such a simple task in Aperture. Exporting Aperture to Photoshop for this tiny edit is of course slightly undesireable. Is there any way to do this task in Aperture?

    Aperture is not the best tool for this (NB: afaik), but you can get something that may suffice using the "output" control in the Curves Adjustment Brick.  (There is no equivalent in the Levels Adjustment Brick.)
    Some version of the following:
    - Enable the Curves Brick
    - Set the range to "Normal"
    - Click inside the histogram grid and drag to the bottom left.  This selects the far left point on the displayed linear adjustment.
    - Click in the output field and change it to the percentage equal to 3/256 (0.012)
    - Click again inside the histogram grid and drag to the top right.  This selects the far right point on the displayed linear adjustment
    - Click in the output field and change it to the percentage equal to 253/256 (0.988)
    After the above adjustments you should see the diagonal line in the Curves Brick rotated _very_ slightly clockwise.  Your image should appear slightly grayer:  your darkest dark is less dark, and your lightest light is less light.
    Screenshot showing exaggerated outputs:
    You can save this as an Effect Preset and apply it to any selected Images.
    As I hope I communicated, there may be better way to do this, and -- even more important -- it may not suffice for your need.
    HTH.
    Message was edited by: Kirby Krieger -- minor clarifications

  • Adjust output level of audio files in Quicktime export??

    Hello...
    I have been using Quicktime to create little ringtones (take an audio snippet, export as .aiff then convert to MP3 for my cell phone). However, the output of these ringtones played on my phone, compared to some other ringtones I have, is VERY loud.
    I was wondering if there is a way either with Quicktime (where I export the .aiff file) or with iTunes (where I convert to MP3) that I can adjust the audio output level of the file so that it is less loud??
    Thanks!!
    Scott

    I WAS WRONG. But there is a solution... record a screen movie using Quicktime (System 10.7 and 10.8).
    Open Quicktime, in the file menu select "New Screen Recording," run your Keynote Presentation and the movie with sound will record if you use Soundflower.
    Soundflower is a free program that can record system sound with QuickTime X, download at <http://cycling74.com/products/soundflower/>
    In "Sound" system preference, set the output to "Soundflower (2ch)". (If you enable "Show volume in menu bar" you can Option-Click the volume icon in the menu bar to select audio devices.)
    In QuickTime X's screen recording window, click the triangle near the top-right to select "Soundflower (2ch)" for the audio inout, then start recording. Keep the monitor volume slider in the recording window all the way to the left or else there will be echo on the recording.
    You won't hear the sound while recording because it is going directly into QuickTime. If you beed to listen while recording, you will also need Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> Hijack the application producing the sound and use the "Auxiliary Device Output" effect to send audio to "Soundflower (2ch)", then make the recording.
    When using Soundflower to send audio to and from applications, you may find that you are not able to send audio through another device to monitor audio output. In such situations you can use Soundflowerbed, an application that resides in the Finder’s Menubar allowing you to tap into Soundflower channels and route them to an audio device. To start the Soundflowerbed menu app go to the Soundflower folder in /Applications and within it open Soundflowerbed.app.

Maybe you are looking for