Output looking fine in display queue but error while using test tab

Hi,
Iam working on an IDOC to XML scenario using multimapping.Here in my scenario i have a field in idoc namely E1PLOGI.
Here the output is two different types of miles.Here the mapping should generate different number of files based on the number of times E1PLOGI occurs.Here in the IDOC i have taken the particular field(E1PLOGI ) occurs six times.
Here the mapping rule is same for the two filestypes.But here for the first file type it is creating six files.But in the second case it is always creating 1 file only.
When i click on display queue and see it shows the correct vaues(six constant values which i mapped to the node for every existence of E1PLOGI) but when i go to test tab and test it creates only one instead of six.
Please help me with this problem.
Thanks,
Bhargav

HI Bhargav,
               May be this is the problem of queue, first u go to <b>Tcode smq2</b> ( for inbound messages) in ur R/3 system and clean up this queue , after this send your message again, hopefully it will solve your problem.
regards
HONEY

Similar Messages

  • Error while using Test tool -WE19

    Hi All,
    When I am trying to use Test tool for IDOC processing ( WE19) in R/3 System for any  Basic Type ,for example: PEXR2002 and select the Standard Outbound Processing, I am getting the message as “Port does not exist in the table of port descriptions.”
    Is this error something where port configuration is missing or some standard error.
    Please provide your inputs.
    Regards
    Pragya Dubey

    Hello Dubey,
    Check it once u r configaration..
    Step by Step Procedure..
    Create the tRFC port definition
    Refer to the following steps to create the tRFC port definition.
    1. SAP transaction code: WE21 – Type /nwe21 on the SAP input window and press the
    Enter key.
    2. Highlight Transactional RFC.
    3. Click the Port pull-down menu, which is located in the upper left corner of the SAP
    screen. Click Create (or press F7).
    4. Select the own port name radio button.
    5. Type a port name such as ALEport. If you use a port name different from this, update
    Table 2 at the beginning of this chapter for future reference.
    6. Click the green check icon to continue.
    7. Fill in the description field with tRFC port (You are free to write anything you want here).
    8. Fill in the RFC destination field with ALESERVER. This must match the name you used on the previous RFC Destination step. If the name you enter here does not exist, the
    system will flag an error and you will need to provide an existing RFC destination.
    9. Make sure that IDoc record types SAP Release 4.x is selected.
    10. Click on save.
    Thanks,
    Satya Kumar
    Reward points if it is useful..

  • PDF file looks fine on the monitor, but paths bond in print in both PS and non-PS printers.

    Hi,
    I have a printing from Illustrator PDF problem. I've got Illy CS4 in which I have a rather huge file with a map and I'm tring to print pieces of the map. The PDF looks fine on the screen, but there are straigt lines on the print leading from one end to the other of two longest paths in the file.
    The problem occurs when saving through Scripts to PDF, Scripts to Poscript in Illustrator CS4 (with all updates) and CS5.1. I also went to a friend who is using CS5 and a PDF made with it also had paths bonded. The problem doesn't occur when saving the file to a low version of Illy, opening it in Corel X4 and printing from a PDF made in Corel. Funny enough I also made a multipage A3+ print of an older version of the file and two of the lines showed up on the first artboard, none on the middle one and only one line in the third one (see the photo below).
    Guys at the printers and more advanced Illustrator users I've asked for help said the've never seen anything like this and have no idea what the problem is. Accually, anyone I know hasn't got a clue of what the problem might be.
    Scans of test prints:
    PostScript printer: http://imageshack.us/photo/my-images/28/cs4postscriptprinter.jpg/
    Office non PostScript printer: http://imageshack.us/photo/my-images/11/cs4officeprinter.jpg/
    PDF made in Corel: http://imageshack.us/photo/my-images/404/illycs4tocoreltopdf.jpg/
    PDF from CS5: http://imageshack.us/photo/my-images/254/illycs5.jpg/
    Multipage PDF: http://imageshack.us/f/444/dscf0712wn.jpg/
    Any ideas of what I can do to print this properly? I'm pretty far from being an Illustrator expert and I ran out of ideas for fixing this and would really appreciate help...

    Hi Scott,
    Thanks for your reply. Print screen of the image I'm supposed to be getting in print, that is my PDF: http://imageshack.us/f/692/printscreenu.jpg/
    In the first jpg below are the only lines which are supposed to be printed (marked in red). The problem is that apart of what I'm supposed to be getting in print (print screen of the pdf above), I'm getting the lines I've marked in yellow in the second jpg below and which are not drawn in my .ai file neither in PDF. They show up in print only.
    PrintScreen of the whole .ai file: http://imageshack.us/f/833/wholefilewithartboard.jpg/
    PrintScreen of the whole .ai file with additional lines: http://imageshack.us/f/32/wholefilewithliens.jpg/

  • Spry menu look fine in Firefox, Safari but not Intenet Explorer

    Help how cann I Spry working fine in Internet Explorer!!!
    Look with firefox this page and with Intenet Explorer and see the differents. In Firefox the menu show nice, but into Intenet Explorer not!!
    When i open the same page lokale the page ist good till I alow the script inside Internet Explorer....
    http://geerthakze.nl/vriendaanzee/index.html
    I hope we can find a solution!!!

    Gramps
    Alvast hartelijk dank voor de tips, de voorgestelde wijzegingen staan nu online. Maandag kijk ik hier nog verder naar, nu heb ik nog wat weibg marge links en rechts en staat het submenu nog iets te ver weg.
    Als het mogelijk is zou ik de pijljes het liefst voor de tekst willen hebben (maar dat vindt ik minder belangrijk).
    Alvast een fijn weekeinde gewenst
    Geert
    Verstuurd vanaf mijn iPhone
    Op 1 okt. 2011 om 15:48 heeft altruistic gramps <[email protected]> het volgende geschreven:
    Re: Spry menu look fine in Firefox, Safari but not Intenet Explorer
    created by altruistic gramps in Spry Framework for Ajax - View the full discussion
    Now everything works nice, I can now chancing the Layout, but watt is wrong!!
    Geert,
    Please update the website with the changes to the menubar and then tell me what changes you wish to make to the layout.
    If you are having a problem expressing your views in English, you can PM me in het Nederlands.
    Gramps
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3948627#3948627
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3948627#3948627. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why page looks fine in Design view but not live view?

    I am new to DW. I created a page that looks fine in design view but now I cant get it to show up in live view or the browser preview. Can some one give me some areas to troubleshoot. Most of the code is from a previous page I created that still looks fine in every view. I am not sure what I could be doing different in setting up this site.

    Thanks for taking the time to reply to question. Aftr taking a break. I came back realized I inserted the stylesheet before I changed site settings. I just needed to remove the forward slash from my stylesheet declaration. FYI for anyone else new to DW: if stuffs not showing  in Live View and Browser Preview eg background images, Go to Manage Sites and check your site setting for Links relative to: You may have switched between document and site root. Thus breaking your links to images or in my case the entire style sheet.

  • Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    Found these instructions here:
    https://discussions.apple.com/message/15388885#15388885
    I found an answer that worked for me. I am using an iMac.
    (1) Sign out of the iTunes store
    (2) Open a NEW account with a new Apple ID
    (3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
    (4) Go to RECOMENDATIONS & PING POSTING
    (5) Turn on Genius there
    Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
    Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
    Worked for me.

  • OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

    Hi All,
    I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
    Error infor are as follows:
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    JNDI Name for the Database pool: eis/DB/soademoDatabase
    JNDI Name for the Data source: jdbc/soademoDatabase
    I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
    Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
    Login info in RetrievePersonService-or-mappings.xml
    <login xsi:type="database-login">
    <platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
    <user-name></user-name>
    <connection-url></connection-url>
    </login>
    jca file content are as follows:
    <adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
    <endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
    <interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
    <property name="DescriptorName" value="RetrievePersonService.PersonT"/>
    <property name="QueryName" value="RetrievePersonServiceSelect"/>
    <property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
    <property name="ReturnSingleResultSet" value="false"/>
    <property name="GetActiveUnitOfWork" value="false"/>
    </interaction-spec>
    </endpoint-interaction>
    </adapter-config>
    RetrievePersonService_db.wsdl are as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
    <WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
    <WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
    <WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
    <WL5G3N0:operation name="RetrievePersonServiceSelect">
    <WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
    <WL5G3N0:input>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:input>
    <WL5G3N0:output>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:output>
    </WL5G3N0:operation>
    </WL5G3N0:binding>
    <WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
    <WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
    <WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
    </WL5G3N0:port>
    </WL5G3N0:service>
    </WL5G3N0:definitions>
    Any suggestion is appricated .
    Thanks in advance!
    Edited by: user11262117 on Jan 26, 2011 5:28 PM

    Hi Anuj,
    Thanks for your reply!
    I found that the data source is registered on server soa_server1 as follows:
    Binding Name: jdbc.soademoDatabase
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 80328036
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
    Binding Name: jdbc.SOADataSource
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 92966755
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
    I don't know how to determine which server the DBAdapter is targetted to.
    But I found the following information:
    Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
    Outbound Connection Pool Server State Current Connections Created Connections
    eis/DB/SOADemo AdminServer Running 1 1
    eis/DB/SOADemo soa_server1 Running 1 1
    eis/DB/soademoDatabase AdminServer Running 1 1
    eis/DB/soademoDatabase soa_server1 Running 1 1
    The DbAdapter is related to the following files:
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
    I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
    <?xml version="1.0"?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params>
    <initial-capacity>1</initial-capacity>
    <max-capacity>1000</max-capacity>
    </pool-params>
    <properties>
    <property>
    <name>usesNativeSequencing</name>
    <value>true</value>
    </property>
    <property>
    <name>sequencePreallocationSize</name>
    <value>50</value>
    </property>
    <property>
    <name>defaultNChar</name>
    <value>false</value>
    </property>
    <property>
    <name>usesBatchWriting</name>
    <value>true</value>
    </property>
    <property>
    <name>usesSkipLocking</name>
    <value>true</value>
    </property>
    </properties>
              </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
    <jndi-name>eis/DB/SOADemo</jndi-name>
              <connection-properties>
                   <properties>
                   <property>
                   <name>xADataSourceName</name>
                   <value>jdbc/SOADataSource</value>
                   </property>
                   <property>
                   <name>dataSourceName</name>
                   <value></value>
                   </property>
                   <property>
                   <name>platformClassName</name>
                   <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
                   </property>
                   </properties>
              </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Then I decided to use eis/DB/SOADemo for testing.
    For JDeveloper project, after I deployed to weblogic server, it works fine.
    But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
    BEA-380001: Invoke JCA outbound service failed with application error, exception:
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
    It almost drive me crazy!!:-(
    What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • 3-1674105521 Multiple Paths error while using Bridge Table

    https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
    Customer Smiths Medical International Limited
    Description: Multiple Paths error while using Bridge Table
    1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
    2. They found found out by adding these 3 joins, they ended with circular error.
    [nQSError: 15001] Could not load navigation space for subject area GXODS.
    [nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
    In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
    3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
    Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
    Thanks
    Teik

    The strange thing compared to your output is that I get an error when I have table prefix in the query block:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
    ORA-38500: Unsupported operation: Oracle XML DB not present
    Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
    And if I remove it, it works:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
    Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
    Nicolas.
    PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

  • Error while using pt:standard.choose tag

    Hi,
    I am getting error while using the ALUI 6.5 Adaptive tags. The details are given below. Can anyone help?
    The code I am using is
    <pt:standard.choose>
                   <pt:standard.when pt:test="stringToACLGroup('user=13009;').isMember($currentUser)">
                        <div class="ali-portlet-controlone">Adit</div>
                        <pt:logic.value pt:value="$currentUser"/>
                        <pt:logic.value pt:value="checking Tags"/>
                   </pt:standard.when>
              </pt:standard.choose>
    Also I checked for the variable $currentUser and it was displaying null so I set the variable as
    <pt:logic.variable pt:key="currentUser" pt:value="13009"/>
    I aslo checked by giving the group id in stringToACLGroup('group=301;') but same result.
    The stack trace is ::
    <!--Error displaying tag when in library standard. String index out of range: -19: com.plumtree.openfoundation.util.XPIndexOutOfBoundsException: String index out of range: -19
         at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:403)
         at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:350)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:165)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.standard.ChooseTag.DisplayTag(ChooseTag.java:110)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfFalseTag.DisplayTag(IfFalseTag.java:75)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfTag.DisplayTag(IfTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.ForEachTag.DisplayTag(ForEachTag.java:162)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.portletpage.PortletRegionDisplayTag.DisplayTag(PortletRegionDisplayTag.java:91)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:243)
         at com.plumtree.portalpages.browsing.myportal.MyPortalDP.PageDisplay(MyPortalDP.java:166)
         at com.bea.alui.taglib.basepage.ContentTag.DisplayTag(ContentTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.basepage.PageBodyTag.DisplayTag(PageBodyTag.java:135)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessMainPageLayout(LayoutDisplay.java:44)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:240)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:219)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:151)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Interpreter.java:2140)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:657)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:190)
         at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:300)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173
    Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -19
         at java.lang.String.substring(String.java:1938)
         at com.plumtree.taglib.standard.WhenTag.DisplayTag(WhenTag.java:72)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.standard.ChooseTag.DisplayTag(ChooseTag.java:110)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfFalseTag.DisplayTag(IfFalseTag.java:75)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfTag.DisplayTag(IfTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.ForEachTag.DisplayTag(ForEachTag.java:162)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.portletpage.PortletRegionDisplayTag.DisplayTag(PortletRegionDisplayTag.java:91)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:243)
         at com.plumtree.portalpages.browsing.myportal.MyPortalDP.PageDisplay(MyPortalDP.java:166)
         at com.bea.alui.taglib.basepage.ContentTag.DisplayTag(ContentTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.basepage.PageBodyTag.DisplayTag(PageBodyTag.java:135)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessMainPageLayout(LayoutDisplay.java:44)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:240)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:219)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:151)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Interpreter.java:2140)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:657)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:190)
         at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:300)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: user590322 on Oct 29, 2009 12:22 AM

    Proper usage:
    <pt:standard.choose>
    <pt:when pt:test="stringToACLGroup('user=1;').isMember($currentuser)">
    ... secret administrator content ...
    </pt:when>
    </pt:standard.choose>
    Note that it's pt:when and not pt:standard.when. Also, Joel is right -- I think $currentuser is case sensitive.
    Chris Bucchere
    http://bucchere.com
    http://twitter.com/bucchere

  • CONTAINS search error while using wildcard character

    HI,
    Please help to me,
    CONTAINS search error while using wild-card characters
    SELECT * FROM CUSTOMER WHERE CONTAINS(EMAIL,'test@%',1) > 0;
    ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: Oracle Text error:
    DRG-51030: wildcard query expansion resulted in too many terms
    Thanks

    I am not sure about the error. But This posting may give you some ideas
    How to limit the number of search results returned by oracle text
    Please have a look.

  • Error while using P2V in Oracle VM 2.2 version

    Error while using P2V in Oracle VM 2.2 version
    I tried using this option by using the steps given on one link but it didnt worked...
    Error:
    code 404, message No permission to list directory.
    I ve tried giving full permissions on for /OVS on Server but invain.
    Can U pls help me...
    Thanks in advance.
    Edited by: user10310678 on Sep 16, 2009 3:32 AM

    user10310678 wrote:
    I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

  • Error while using XML Iview, please contact your system administrator.

    Hello everybody,
    I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
        Area           Version
        J2EE Engine    6.40 PatchLevel 98256.313
        Portal         6.0.14.0.0
    , can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
    Thanks in advance,
    Regards,
    Sarabjeet.

    Hi Sarabjeet,
    The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
    And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
    The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
    I will check if I can find out any more specific info.
    Daniel

  • Error while using exp utility

    Hi,
    I am getting the following oracle error while using exp,
    can someone please suggest on this,
    About to export specified users ...
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user SIEBEL
    . exporting PUBLIC type synonyms
    . exporting private type synonyms
    . exporting object type definitions for user SIEBEL
    About to export SIEBEL's objects ...
    . exporting database links
    . exporting sequence numbers
    . exporting cluster definitions
    . about to export SIEBEL's tables via Conventional Path ...
    . . exporting table EIM_ACCDTL_TNT
    EXP-00008: ORACLE error 904 encountered
    ORA-00904: "MAXSIZE": invalid identifier
    . . exporting table EIM_ACCNTROUTE
    EXP-00008: ORACLE error 1003 encountered
    ORA-01003: no statement parsed
    . . exporting table EIM_ACCNT_CUT
    EXP-00008: ORACLE error 904 encountered
    ORA-00904: "MAXSIZE": invalid identifier
    . . exporting table EIM_ACCNT_DTL
    EXP-00008: ORACLE error 1003 encountered
    ORA-01003: no statement parsed

    Satish is right, there exists bug for 11.1.0.6.
    Look at metalink note 741984.1.
    Bug number is 5872788 - there exists patch as well.

  • Error While Genrating Test Report in Test Plan Management

    Hi Guru's
      I am getting an authorization error while generating test report via STWB_info.
      Just i selected the test package and while click the test report i am getting this error.
    Error during authorization check
    Message no. TWBHS540
    Guide Me to solve this issue
    thanks in advance
    regards
    Anandh

    Hi,
    Please try the following:
    Start transaction SMGENDOC03
    Do not change anything but just hit the save button.
    Afterwards restart transaction STWB_2 and try again to generate again.
    Hope this helps.
    Cheers
    SH

  • Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

    Hi All,
    I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
    Error: 1 (Field level error)
      SegmentID: NTE
      Position in TS: 70
      Data Element ID: NTE02
      Position in Segment: 2
      Data Value:
      3: Too many data elements
    For Eg: NTE*GEN*My Text *goes here
    Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
    Can it be done?
    Thanks.

    Sorry, no.
    X12 does not support an escape character so whatever is used for delimiters become reserved characters.
    If you want to allow '*' in the data, you will have to chooser a different Element delimiter.  The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

Maybe you are looking for

  • Pagination query help needed for large table - force a different index

    I'm using a slight modification of the pagination query from over at Ask Tom's: [http://www.oracle.com/technology/oramag/oracle/07-jan/o17asktom.html] Mine looks like this when fetching the first 100 rows of all members with last name Smith, ordered

  • Output ipconfig to html

    Hi All, It sounds simple but it makes a bit of a mess in the html. I have tried using convertto-html and also tried manually creating the html by creating a string with the header etc... as follows: $file = "c:\temp\a.html" "<html><head><title>Networ

  • NoClassDefFoundError durin ejbc

    Hi, I'm getting this error while running ejbc on one of our app jars. The class for which this error occurs is in the app jar itself. Can any one help me to figure out why this is happenning? The command line is similar to the following java -Dweblog

  • Color Calibrating MacBook + 24" LED Displays

    I'm using a Gretag-Macbeth Eye-One Display 2 system to color calibrate my monitors. The question is, when the LED is connected to the MacBook, and I calibrate it, does this affect the calibration of the display on the MacBook itself? After my last ca

  • How to change default text properties and text box properties

    I'm adding text to a PDF document by using the text box tool. The default is to put a border around the box and also the font is red and larger than I'd like. I think I found how to change the default box properties (so it has no boarder). For the te