Output Medium for SRM PO not saved

Hi Gurus,
We just upgraded the landscapes with the recent servicepack level. We are using SRM 5.0 Extended classic on SP level 15.
The issue now is when PO is ordered for first time, output medium defaults to what ever the config setting has. It was not necessary to select output medium(Printer/fax/email).
But when PO is changed(not necessarily change PO data) and either check/order is selected, message 'No output medium identified' is thrown.
If you select any one of the output medium and then do the check/order, PO is processed/ordered. I am not sure if the output medium settings are not saved or being overridden during PO change. Please advise.
thanks
Rao.

Hi Rao
some thing makes default medium as spaces.
Note 1072367 - No output medium identified error even if medium selected.
A Purchase Order is created with a vendor containing no default medium specified in the vendor master data. Now, even after selecting a valid output medium, the error message 'No output medium selected' does not go off
check with technical resource ? is it really internally makes SPACES (empty)
check any logic in your smartform.
if yu have time create one OSS mesaage too.
muthu

Similar Messages

CHANGE THE OUTPUT MEDIUM FOR SRM PURCHASE ORDERS

We are using SRM 5.0
I tried to change the SRM purchase order's output
medium from 'XML' to 'Print' using a function module
'BBP_OUTPUT_PO_PARAMS_SET' within the BADI 'BBP_ECS_PO_OUT_BADI'. Though it changes the
output medium and chooses the right radio button
at the UI interface level (i.e)
Purchase order Header->output->
radio buttons(print,email,fax,xml)
It still holds the output medium as 'XML' at the
Document output log and process the document as 'XML'.
Is there a way to update the output log to hold the changed medium i.e (print)
Thanks and Regards,
Gia

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

Cannot change the output medium for contract

Hi Everyone,
In the contract we have "Output" tab to change the output medium for the contract.
So the issue is when I click on the change button and try to change e-mail address,I am not able to do that.
The e-mail address is grayed out though I am in the change mode.
This is happening for some contracts only.
How should I change the e-mail address of the contract?
Thanks & Regards,
Khushbu.
Edited by: Khushbu Brahmbhatt on Feb 25, 2011 9:01 PM

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

Multiple Output Medium for vendors in Manage Business Partner

Hi,
I'm trying to put more than one output medium in Manage Business Partner for a Vendor, Transaction BBPMAININT.
But unable to do so.
1. I would need assisstance that is it right to have multiple output medium for a Vendor functionally?
2. How do i achieve it.
Waiting for a quick response,
Regards,
Neha Misra.
Edited by: Neha Misra on Mar 28, 2008 1:18 PM

You can maintain Alternate Vendor Contact for the Vendors in the transaction BP; The Purchaser here after can choose which one to use during a particular time of the ordering the purchase order. This will be possible for the purchaser at the time of creating the purchase order in the Basic Data Tab - Alternate Vendor Contacts.
For every vendor contact you will need to have a default medium for output; which will be used to send the PO to the vendor.
Please reward points if found useful.
Thanks
Kasee Palaniappan

Default output medium for PO

Hello,
Can any one please tell, where can I maintain the default output medium for a business partner?
Is it in transaction BP - address tab?
Where can I set the default output as XML?
I am in SRM4.0. Please help me.
Regards.

Hi Aruna
Manage Business Partner via web
There is output medium section in the Business Partner.
however it may stored in BBP_SENDMEDIUM table plz check..
regards
Muthu

How to set output medium for a PO for a vendor in SRM?

Hi,
I want to set the output medium(printer) of the PO for a vendor in SRM.
Where can I do it?
Thanks and Regards,
Ramesh

Hello Ramesh,
If your SRM vendor is a R/3 (i mean it was replicated from R/3), check what is the standard communication method for this vendor in its R/3 view.
This communication method will be the same in SRM once vendor created/updated in SRM (see "Manage Business Partner" web transaction for monitoring).
If your vendor is only created in SRM, maintain directly this default ouput medium in same "Manage Business Partner" web transaction for monitoring.
Then, in order to have the printing output successfully processed, you need to add in the attributes of organizational units of your structure ( PPOMA_BBP transaction) a default value for the printer (see "Attributes" tab and attribute ID "PRI").
Finally, be sure that in BBP_PO_ACTION_CONF transaction, printing processing type is correctly customized.
Regards.
Laurent.

Setting for Speakers Balance not saved

I have a PCI Express X-Fi Xtreme Audio. It works great, with one exception: the settings in Speakers Balance (reached either via Control Panel or via the Creative Console) are not saved between sessions.
In addition, the settings are lost whenever the sound fader is temporarily set to zero.
Re-entering the settings gets old fast, so I wondere whether there is a solution.

Hi Rao
some thing makes default medium as spaces.
Note 1072367 - No output medium identified error even if medium selected.
A Purchase Order is created with a vendor containing no default medium specified in the vendor master data. Now, even after selecting a valid output medium, the error message 'No output medium selected' does not go off
check with technical resource ? is it really internally makes SPACES (empty)
check any logic in your smartform.
if yu have time create one OSS mesaage too.
muthu

Output type for ORDCHG is not created in PO

Hi,
We have a problem for the output type autogeneration when a PO is changed (ORDCHG).
The scenario is the next:
- We have a Z output type for the creation of the PO. It works fine (the outputy type is generted and the idoc sent)
- We have another Z output type (ZCG3) for th PO change. The output type is not generated automatically whe you change the quantity for example. The strange thing is that if you create the output type manually and you send the idoc and later you change again the PO, now the output type is generated automatically. So it is like it is necessary a previous output type ZCG3.
Do you know where could be the problem?
We have the condition records as the other output type. Also we have marked Multiple issuing and in WE20 we have 2 entries for message ORDCHG in message control (one entry with change message flag marked and the other one without to mark).
Thank you in advance,
Manel

check the "MULTIPLE ISSUING" option in NACE.
NACE -> Select Application EF -> Click on Output types -> Select output type -> Click on Details Button -> Go to General Tab -> Select Multiple Issuing option
Regards
Vinod
Edited by: Vinod Kumar on May 3, 2010 4:43 PM

'poster frame' for movies is not saved

Hi iTunes people,
Note - this all used to work in Leopard - this feature has become non-functional since the arrival of Snow Leopard.
When I set the POSTER FRAME, via the contextual menu that appears for an entry in the movies section of iTunes, it is not saved.
Although the 'artwork' image in the lower left of the itunes window temporarily shows the frame I selected, if I go away from that item or perform the same action on another movie, the poster frame that had been selected is gone and is replaced with whatever was there from before.
The only way it appears that one can save a poster frame is to physically drag-n-drop an image into the ARTWORK tab of the 'Get Info dialog for that item.
Does anyone have any other suggestions about how to make this feature work - without having to create and deposit artowrk into the GetInfo dialog? I lost 1900+ poster frames I had created for various movies and clips because of this problem. I really am not looking forward to again having to do all that work.
Thanks!

Hi,
Change the title of the query in tcode
SQ01-->change
here change the title and save
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 3:49 PM

Output Type for Deleting Delivery Notes completely

Hello,
I've a problem that in case of complete deletion of a delivery note I want to get message of deletion via IDOC DELVRY05. Normally the complete document will be deleted without any outbut determination.
Where do I have to implement this? Is it in normal output determination for outbound deliveries?
Thank you for your effort.
Kind Regards
Norbert

*

Nokia Maps 3.0 for WP8 Favourites not saving

Note I have found that Maps are not saving any favourites after closing out maps and reopening.
Anyone else can confirm this bug?
Thanks
Solved!
Go to Solution.

@Takiwaki
Have you enabled "Synchronise favourites automatically"?
Happy to have helped forum with a Support Ratio = 42.5

Output type for V2 does not show up in Vl02n

Hello all,
I have following problem:
in transaction NACE, I have marked V2 (Shipping) and clicked on the output type button to create a new output type. I've created the output type with all parameters required.
But now, when I go to Vl02n - Extras - Delivery Output - Header, I get the error message: output type does not exist, when I enter my output type.
What I am doing wrong?
Thanks
Anne

You need to maintain
1) Output types
with Processing routines with the medium and program etc (You must have already done that)
2) Add newly created output type in the respective procedure.
3) Check right access sequence is used if you want to maintain condition record.
4) Maintain the condition record for this output.
Please check onece again your settings.

Output form for Customer Credit Note - FB75

Dear Expert,
my client has demanded a Form Output in T-Code FB75 - Customer Credit Note.
we are ready with Logic & format of the Credit Note to the ABAPer.
Need your help :
1. From where & how do we activate form for this T-Code
2. Print a form once we finish a posting to Customer Credit Note in FB75

You have to develop a Z Transaction for the FORM developed in Transaction Code SE93
Regards
Sanil Bhandari

Smartforms: Output Options for Field Contents not working within table

Hello,
to display an amount and its unit I am using &GS_MM_IT_GEN-MENGE(R)& &GS_MM_IT_GEN-MEINS& with a line of a table. Unfortunatly it seams that the output option "R" (right-justified) is not working with the table context. Has anyone an idea, what to do?
Thanx,
Peter

Dear all,
thank you for your suggestions. I have found out, that the output option work pretty well as described in the documentation. The are output options of a field and not of a column! To get a right justified column, I had to change the attribute of the parapraph assigned to the column.
Regards
Peter

Custom tabular form for multi-row not saving data

Ok, before anyone asks, yes, I did read the how-to:-)
I have a custom tabular form, which I did cause I need to use popups and the popups that you can use in the wizard tabular form does not display the text but rather the value underneath it.
It returns data rather nicely and when I go and update values I can tell it is changing the fields underneath. I put a process in that will display the values in text fields on the form (for one row only) and I see them changing from what is already there and with the proper values.
However, when I do that the data that is displayed then gets reverted back to what it was previous to the update but reports that the process was successful.
I have also tried to insert but that is basically doing the same thing. Can anyone guide me.
SQL to generate the tablular form...
SELECT x.sak_release_db
, x.sak_object
, x.sak_release
, x.sak_participant
, x.sak_csr
FROM
(SELECT htmldb_item.hidden(1,sak_release_db) sak_release_db
, htmldb_item.popupkey_from_query(2, sak_object,
'SELECT b.nam_schema||''.''||a.nam_technical as table_name , b.sak_object
FROM system_object a
, database_table b
WHERE a.sak_object = b.sak_object') as sak_object
, htmldb_item.hidden(4,sak_release) sak_release
, htmldb_item.popupkey_from_query(5, sak_participant,
'SELECT nam_first || '' '' || nam_last as name, sak_participant FROM co_participant') sak_participant
, htmldb_item.popupkey_from_query(7, sak_csr,
'SELECT external_id|| ''-''||id_split as co, sak_csr FROM co') sak_csr
FROM release_db_xref
UNION ALL
SELECT htmldb_item.hidden(1,NULL) sak_release_db
, htmldb_item.popupkey_from_query(2, NULL,
'SELECT b.nam_schema||''.''||a.nam_technical as table_name , b.sak_object
FROM system_object a
, database_table b
WHERE a.sak_object = b.sak_object') as sak_object
, htmldb_item.hidden(4,NULL) sak_release
, htmldb_item.popupkey_from_query(5, NULL,
'SELECT nam_first || '' '' || nam_last as name, sak_participant FROM co_participant') sak_participant
, htmldb_item.popupkey_from_query(7, NULL,
'SELECT external_id|| ''-''||id_split as co, sak_csr FROM co') sak_csr
FROM dual) x
Process to verify that I have the correct global fields: (Type: PL/SQL anonymous block, Process Point: On Submit - After Computations and Validations)
begin
:P3_2 := replace(htmldb_application.g_f02(1),'%'||'null%',NULL);
:P3_5 := replace(htmldb_application.g_f05(1),'%'||'null%',NULL);
:P3_7 := replace(htmldb_application.g_f07(1),'%'||'null%',NULL);
end;
Process to do the insert/update. Note, I hardcoded the value in the where clause but I was originally using the global value for g_f01 (i also tried putting a commit in there for fun) (Type: PL/SQL anonymous block, Process Point: On Submit - After Computations and Validations):
-- Update the RELEASE_DB_XREF table
FOR i IN 1..htmldb_application.g_f01.count
LOOP
IF htmldb_application.g_f01(i) IS NOT NULL THEN
UPDATE release_db_xref
SET sak_object = replace(htmldb_application.g_f02(i),'%'||'null%',NULL)
, sak_participant = replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
, sak_csr = replace(htmldb_application.g_f07(i),'%'||'null%',NULL)
WHERE sak_release_db = 22;
ELSE
IF htmldb_application.g_f02(i) IS NOT NULL THEN
INSERT INTO release_db_xref
(sak_object
,sak_release
,sak_participant
,sak_csr)
VALUES
(replace(htmldb_application.g_f02(i),'%'||'null%',NULL)
,htmldb_application.g_f04(i)
,replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
,replace(htmldb_application.g_f07(i),'%'||'null%',NULL));
END IF;
END IF;
END LOOP;

Florian,
Checkboxes are different from other HTML form items. When you have a text box for example, there's always a value send to the server when submitting. Even if that value is NULL. When you have a checkbox however, you only get the value if the checkbox is checked. It's not posted to the server when it is not checked. That's the general behavior of HTML forms and not specific to Oracle HTML DB.
When working with tabular forms in HTML DB, you can access your form values using the htmldb_application.g_f0x arrays. Now if you have for example 10 rows in your form, then you'll get ten elements in your array for text boxes, select lists, etc. For checkboxes however you'll only get as many elements as you have rows checked. If I read your update and insert code correctly, you're trying to use the checkbox arrays the same way you use the arrays based on other item types. My recommendation would be to use Yes/No select lists instead of checkboxes or at least use select lists initially to get it working and then work on properly processing the checkboxes.
Some general information about working with checkboxes in tabuar forms can be found here:
http://www.oracle.com/technology/products/database/htmldb/howtos/checkbox.html#CHECKBOX_IN_REPORT
Hope this helps,
Marc

Output Medium for SRM PO not saved

Similar Messages

Maybe you are looking for