Output Message Setup for Material Document

Hi,
Can you guide me on setting the default output message for 101 Documents.
Regards
Shankar

Hi,
PRINT OUT OF MATERIAL DOCUMENT :
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards,
Shailesh Mackwan

Similar Messages

Maintain output condition record for material documents

Please help me with transaction code to " maintain output condition records" for material documents

Hi,
Is it MN21 transaction you are looking for?
Cheers,
HT

PO Output message types for different document types

Hi,
I wanted the system automatically generate the messages whenever a PO is created for different document types like NB,UB,Blanketorder, Pilot run.
These are the steps i did...plz advice any more steps to make this work
1. the output type I am using is NEU-purchase order
2. I have created condition records for document types NB,UB,PR etc
I was sucessfull in getting the messages automatically for the standard(NB) PO..but not for the other document types
Plz advice me how I can achieve this with further configurations
Thanks
SKid

If you have created conditin record for all the document type in MN04 then it should work becuase doc type has nothing to do for printing config.
this is basically a condition record.
check your condition record

How to setup number range for Material Documents created by goods movement

Hi Experts,
Good day!
Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
Thanks. Have a wonderful day!
Rockz

Hi,
Tcode - OMBT
Regards,
Vivek

Need an IDOC EDI STEPS for material document(MB03)

HI ALL,
i need an IDOC for material document. For example, user in SAP make material document (t-code MIGO or MB11), then automatical is downloading outbound IDOC, which contain information about material document.HOW TO PROCESS IT THROUGH EDI .GIVE THE STEPS.

like below you can do your settings
The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
3. After that, assign the IDoc Type to Message Type in WE82.
4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
i. In Message Control Configuration, we'll maintain
a. Condition Tables
b. Access Sequences
c. Output Types
ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.

Maintain output condition table for billing documents

Hi
I need to create new output condition table for billing document with the key combination of "Billing type and Export Indicator". In Field catalog: Messages for billing documents I am able to find field Export Indicator but the same field i am not able to find creation of new condition table (V/63).. Kindly let me know is there any settings required to show the same in V/63.
Thnaks
Srinivas

Hi Ram
The filed already is there in in structure" KOMKBV3" ....
Thanks
RAO

User Specific Output Message Determination for Purchase Orders

Hi Sap Experts,
Is there any functionality in SAP where you can setup specific Output message determination for a user?
For example whenever User A creates a purchase order through ME21N it will always be emailed to vendor, whereas for User B whenever they create purchase orders it will always be printed.
Is this possible?

There is no standard functionality with in SAP.
To achieve this Create 2 output types accordingly and create customized tables with user id fields

Creation Output Message Type for Scheduling Aggrement

Hi,
Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
Regards,
Pankaj

Hi,
Output determination process for Scheduling aggrement.
SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
1)First create condition table based which becomes condition record for accessing the data.
2)Create access sequence to access the data or search the based on the conditoin record in sequence of the condition table.
3)Define your message type like print,fax etc.
Maintain the conditon record for the MN07 for the output type which new one you created.
Regards
Ravi Shankar.

Inbound Idoc for material document cancellation

Hello,
Could you update me whether there is any Inbound Idoc type available for material document cancellation (like t.code MBST). I found message type MGBMCR, but it's only allowing me to create the material document like GRs but not cancellations.
/Mallik

To my knowledge, there is no such IDoc. Cancellation is an exceptional situation and should be treated as such. If one needs an IDoc interface for cancellations, I'd have to say there is something very wrong with the business process.

Reading Additional info for Material Document (Movement Types 313, 201)

Hi SAP Gurus,
I am currently working on a requirement for Material Document Interface.
The Requirement is as below:
(1) The user creates/modifies a material document using MB01/MB03/MIGO for movement types 313 and 201 separately.
(2) The user maintains additional information by creating a NOTE using the option
SERVICES FOR OBJECT --> CREATE NOTE.
(3) To Print the materail document information.
The Approach is followed is:
1) I have to retrieve the Address for From and To Locations respectively along with document data and display it as Simple List output.
Approach:
I retrieved the data from MKPF and MSEG tables respectively.
Also retrieved the data for FROM and TO locations using table TWLAD and function module ADDR_GET.
(2) I also need to retreive additional information created by the user using the option SERVICES FOR OBJECT --> CREATE NOTE.
Approach:
Request your guidance and inputs to solve the point (2) mentioned above.
I have debugged the SAP Standard tcode MB01, MB03 ,MIGO which have the option SERVICES FOR OBJECT --> CREATE NOTE.
I have also used ST05 to trace the transaction to get a proper solution.
But, i was able to observe that only a table SOOD provides the initial required info only which points to a office document type.
Looking forward to your valuable inputs, so that i can retrieve the data entered using the option SERVICES FOR OBJECT --> CREATE NOTE.
Thanks in advance for spending time and
guiding me to deliver the development on time.
With best regards,
Sudhakar

Hi,
Try this..
TABLES: MSEG.
PARAMETERS: P_DATE LIKE MKPF-BUDAT.
SELECT-OPTIONS SO_BWART FOR MSEG-BWART.
SELECT-OPTIONS SO_MATNR FOR MSEG-MATNR.
DATA: BEGIN OF ITAB OCCURS 0,
 MBLNR LIKE MKPF-MBLNR,
 GJAHR LIKE MKPF-MJAHR,
 MATNR LIKE MSEG-MATNR,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 END OF ITAB.
SELECT AMBLNR AMJAHR BMATNR BMENGE B~MEINS
 INTO TABLE ITAB
 FROM MKPF AS A INNER JOIN MSEG AS B
 ON AMBLNR = BMBLNR AND
 AMJAHR = BMJAHR
 WHERE A~BUDAT = P_DATE
 AND B~BWART IN SO_BWART
 AND B~MATNR IN SO_MATNR
 AND B~MENGU = 'X'.
The field MENGU might be used to check if the
material movement has affected the stock..
Also I have used posting date = given date in P_DATE..
LOOP AT ITAB.
 WRITE: / ITAB-MBLNR,
 ITAB-GJAHR,
 ITAB-MATNR,
 ITAB-MENGE,
 ITAB-MEINS.
ENDLOOP.
Thanks,
Naren

OMX4 - FBN1 - Number range for Material document and FI document

47 - is for FI document number range in Material ledger FBN1. OMX4 gives number range for Material document. My question is how big the number range must be? Since thousands of Materials involved, I couldn't imagin this?
Anybody knows, how to determine the size of no. ranges in Material Ledger configuration? SAP simply says, check no. ranges whether it meets the requirement....
I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
Cheers,
Ashok

What is the number range you are using? Year Dependent or Independent?
When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

PO Output message triggering for change in PO

Hi,
We have configured a output message type for PO create . The output message is defiend for condition record doc type, partner as LS and medium A(ALE) and partner name.
Once PO is created the output is getting triggered and idoc created.If I make any changes in PO agai the same output message type si getting triggered and new idoc created. This shud not happen.
I checked , the idoc message type ORDERS n its assigned to only ME10 code .
Cheked all the settings of message type and fine tuned is also not maintaiend.
Please suggest .

Hi
under SPRO > MM > Purchasing > Messages > Output Control > Message Types > Define Message Types for Purchase Order > Fine-Tuned Control: Purchase Order - check whether your output type is added with operation 2 (change)
Thanks !
E.Avudaiappan

Create transfer order for material document - 4.6C system

Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
Sarath

Sarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again.

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

Number range for material documents

Hi SAP Gurus,
Can anyone please advise if we can reset number range for material documents once it reached to last number for existing number range ?
Thanks & Regards,
Manoj

Hi,
If material numbering reached to last number for existing number range, you can create Number Range Text Group and assign to your material type in following path
IMG -> Logistic ->General -> Material Master ->Basic Settings ->Material Type ->Define Number Range for each Material Type
OR
T.code:MMNR
Lets example you have now:
Number Range Text Group:01
From Number:     1
To Number     :19999999
Now you can create Now One Number Range Text Group
Number Range Text Group:02
From Number:20000000
To Number     :29999999
Now assign Number Range Text Group to your material type in MMNR , {{by clicking group in menu, select maintaion->group->insert
Number Range Text Group:02
From Number:20000000
To Number     :29999999
and save}}.
Regards,
Biju K

Output Message Setup for Material Document

Similar Messages

Maybe you are looking for