Output module connections

I am currently using a cRio with a NI 9476 with the D-sub connector kit, so the DAQ has wire terminal outputs. I have found that BNC cables work the best for signal generation, what is the best method of generation signals with wire terminal outputs. I know you cannot convert from wire terminal to coaxial but just looking for suggestions.
Thanks

That will all depend on what you are connecting...look at the pinout for the device. If you want to run a common ground between your DUT and the 9476 you can. If you are just running the wired around you are correct you cannot use BNC because they will all be carrying seperate voltage signals.
Doug Farrell
Product Manager - Condition Monitoring
National Instruments
National Instruments Condition Monitoring

Similar Messages

Error while generating form 16 in portal - Screen output without connection

Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AM

Dear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak

An output module failed. The file may be damaged or corrupted.

Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
Screenshot of the error message:
I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
Screenshot:
It took a while to connect to the dynamic link server, and failed.
This is a log of what has happened in Adobe Media Encoder.
- Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
- Preset Used: YouTube HD 720p 29.97
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
- Encoding Time: 00:00:12
06/29/2014 02:29:14 PM : Encoding Failed
The Operation was interrupted by user
(no need to worry about the above part)
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
- Preset Used: Custom
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
- Bitrate: CBR, 2 pass, Max 10000.00 kbps
- Encoding Time: 00:01:42
11/22/2014 12:24:39 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
- Preset Used: Custom
- Video: 1280x720, 29.97 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
- Encoding Time: 00:00:11
11/22/2014 12:52:11 AM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:51
11/22/2014 12:53:51 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:46
11/22/2014 08:39:46 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
- Preset Used: Match Source - High bitrate
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:00:00
11/22/2014 10:06:45 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I need some help! Any solutions?.
Computer Specs:
AMD FX-6300
8GB 1600MHz DDR3 RAM
NVIDIA GeForce GTX 650 Ti BOOST
1TB 7200RPM Hard Drive
Windows 8.1 Update 1(with latest updates)
EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
Screenshot of a new project other than this I am rendering at the time of writing this edit:

Can other projects can output to the same output location? Yes
Can other projects render with the same render settings (codec, format, etc.)? Yes.
If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec.

ESS Persoanl Data Error(Screen output without connection to user)

Hi All,
        When i am trying to Save my data in my ESS----->Personal Info -
>Personal Data, i am getting below error, any body know how to resolve this issue, please let me know.
Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
     at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
     at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
     at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 64 more
and after that i went to ST22 Transaction Code in my ECC System i found two types of DUMP errors,
the below are those details.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          09/09/2008 08:19:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
"HRXSS_PER_CLEANUP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ERPDEV01"
Network address...... "10.88.1.6"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ERPDEV01"
Database type..... "MSSQL"
Database name..... "DE1"
Database user ID.. "de1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1229856
MM Free. 2957360
User and Transaction
Client.............. 210
User................ 937048
Language Key........ "E"
Transaction......... " "
Transactions ID..... "68211f907e6911ddbfef005056833439"
Program............. "SAPLHRXSS_PER_MAC"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 645
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "HRXSS_PER_CLEANUP"
Call Destination.... "<unknown>"
Source Server....... "ERPDEV04"
Source IP Address... "10.88.1.9"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
"HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 13
of the (Include) program "LHRXSS_PER_MACU04".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
line
1 of the (Include program "LHRXSS_PER_MACU04 ".
Source Code Extract
Line
SourceCde
1
FUNCTION hrxss_per_cleanup.
2
3
""Local interface:
4
*" EXPORTING
5
*"     VALUE(MESSAGES) TYPE BAPIRETTAB
6
7
8
CALL METHOD mac_adapter->cleanup
9
   IMPORTING
10
     messages = messages.
11
12
TRY.
>>>>>
CALL METHOD xss_adapter->cleanup
14
15
CATCH CX_HRPA_VIOLATED_ASSERTION .
16
ENDTRY.
17
18
ENDFUNCTION.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080909
SY-UZEIT
081916
SY-XPROG
SAPLHRXSS_PER_MAC
SY-XFORM
HRXSS_PER_CLEANUP
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
HRXSS_PER_CLEANUP
3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
HRXSS_PER_CLEANUP
2 FORM         SAPMSSY1                            SAPMSSY1                               85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
%_RFC_START
Chosen variables
Name
Val.
No.       4 Ty.          FUNCTION
Name HRXSS_PER_CLEANUP
MESSAGES
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
No.       3 Ty.          FORM
Name HRXSS_PER_CLEANUP
SYST-REPID
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_%_MESSAGES
Table[initial]
No.       2 Ty.          FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
3000
SY-XPROG
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_SPACE
2
0
0
0
No.       1 Ty.          MODULE (PBO)
Name %_RFC_START
%_PRINT
000                                                                                0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
3000
Internal notes
The termination was triggered in function "method_call_iref"
of the SAP kernel, in line 2207 of the module
"//bas/700_REL/src/krn/runt/abmethod.c#8".
The internal operation just processed is "METH".
Internal mode was started at 20080909081916.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : disp+work.EXE (pid=3864)
When      : 9/9/2008 8:19:16.162
Threads   : 2
Computer Name       : ERPDEV01
User Name           : SAPServiceDE1
Number of Processors: 4
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id d90
FramePtr         ReturnAd         Param#1          Function Name
0000000007d1bb20 0000000077d704bf 000000003879a800 ntdll!ZwWaitForSingleObject
0000000007d1bbc0 0000000001722981 0000000000000180 kernel32!WaitForSingleObjectEx
0000000007d1be10 00000000006110c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007d1be40 0000000000af8e9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007d1be90 0000000000afe0c0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7091)]
0000000007d1c870 000000000081768a 0000000001adae28 disp+work!ab_rabax [abrabax.c (1231)]
0000000007d1c8d0 0000000000830b12 0000000000000000 disp+work!method_call_iref [abmethod.c (2215)]
0000000007d1ca50 0000000000a0bac7 0000000000000008 disp+work!ab_extri [abextri.c (554)]
0000000007d1caa0 0000000000ac830c 0000000000000008 disp+work!ab_xevent [abrunt1.c (281)]
0000000007d1cb30 000000000066f348 0000000000000008 disp+work!ab_dstep [abdynpro.c (492)]
0000000007d1ccb0 0000000000672f1d 000007fe571fc890 disp+work!dynpmcal [dymainstp.c (2403)]
0000000007d1cd40 000000000067291a 000007fe571414a0 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007d1cdf0 00000000006320d5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007d1fc30 00000000004d7393 0000000000000003 disp+work!dynpen00 [dymain.c (1629)]
0000000007d1feb0 000000000042d5a6 000000000a595080 disp+work!TskhLoop [thxxhead.c (4470)]
0000000007d1fee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1121)]
0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007d1ff70 0000000077d5964c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
State Dump for Thread Id 1e0c
FramePtr         ReturnAd         Param#1          Function Name
000000000edffe40 0000000077d5f691 0000000007d86460 ntdll!NtFsControlFile
000000000edffeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
000000000edfff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000edfff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000edfffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMSSY1
0
04/11/2005
09:27:15
22528
E
1
Prg
SAPLSYST
1
02/13/2005
17:31:56
35840
E
2
Prg
SAPLHRXSS_PER_MAC
2
07/03/2008
12:14:05
58368
E
3
Prg
CX_SY_REF_IS_INITIAL==========CP
3
07/05/2005
13:10:16
10240
E
4
Typ
SCX_SRCPOS
0
05/18/2004
14:07:11
2048
5
Prg
CX_DYNAMIC_CHECK==============CP
5
07/05/2005
13:10:16
10240
E
6
Prg
CX_ROOT=======================CP
6
02/06/2008
15:43:48
11264
E
7
Prg
CX_NO_CHECK===================CP
7
07/05/2005
13:10:16
10240
E
8
Prg
CX_SY_NO_HANDLER==============CP
8
07/05/2005
13:10:16
10240
E
9
Typ
SYST
0
09/09/2004
14:18:12
31744
Directory of Application Tables
Name                                     Date       Time       Lngth
Val.
Program SAPMSSY1
SYST                                       / /       : :     00004612
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
243
FUNC
03
001F
LHRXSS_PER_MACU03
1
244
PAR2
02
0000
001F
C000
LHRXSS_PER_MACU03
1
246
FUNC
13
0003
LHRXSS_PER_MACU03
1
247
PAR2
01
0000
0014
C001
LHRXSS_PER_MACU03
1
249
FUNC
FF
0000
LHRXSS_PER_MACU03
1
250
ENDF
00
0000
LHRXSS_PER_MACU03
1
251
00
0000
LHRXSS_PER_MACU03
1
252
STCK
02
C001
LHRXSS_PER_MACU03
1
253
CPOP
00
0000
LHRXSS_PER_MACU03
1
254
00
0000
LHRXSS_PER_MACU03
1
255
FUNP
3E
0000
0014
8000
0000
8000
0000
0000
LHRXSS_PER_MACU04
1
259
FUNP
80
0000
0000
0000
0000
0000
0000
0000
LHRXSS_PER_MACU04
1
>>>>>
METH
03
0000
0000
8006
0000
0000
0000
0000
LHRXSS_PER_MACU04
13
267
PAR2
00
0000
0001
0000
LHRXSS_PER_MACU04
13
269
FUNE
00
0000
LHRXSS_PER_MACU04
18
270
00
0000
LHRXSS_PER_MACU04
18
271
PERP
00
0000
LHRXSS_PER_MACU04
1
272
FUNC
03
E844
LHRXSS_PER_MACU04
1
273
FUNC
03
0020
LHRXSS_PER_MACU04
1
274
FUNC
13
0003
LHRXSS_PER_MACU04
1
Second Dump
Runtime Errors         DYNPRO_SEND_IN_BACKGROUND
Date and Time          09/09/2008 08:19:15
Short text
Screen output without connection to user.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTRD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During background processing, the system attempted to send a
screen to a user.
Current screen: "SAPLSTRD " 0351.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DYNPRO_SEND_IN_BACKGROUND" " "
"SAPLSTRD" or " "
"SYSTEM-EXIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ERPDEV01"
Network address...... "10.88.1.6"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "ERPDEV01"
Database type..... "MSSQL"
Database name..... "DE1"
Database user ID.. "de1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 12569520
Heap.... 0
Page.... 131072
MM Used. 8307376
MM Free. 4259072
User and Transaction
Client.............. 210
User................ 937048
Language Key........ "E"
Transaction......... " "
Transactions ID..... "68211f907e6911ddbfef005056833439"
Program............. "SAPLSTRD"
Screen.............. "SAPLSTRD 0351"
Screen Line......... 0
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 700
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Nam

Hello Abhiram,
Please i request weather you have assign 0105 - Communication infotype to ESSuser and
check the following JCos has been configured.
SAP_R3_Financials
SAP_R3_Financials_Metadata
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
SAP_R3_SelfServiceGenerics
SAP_R3_SelfServiceGenerics_MetaData
SAP_R3_Travel
SAP_R3_Travel_MetaData
SAP_R3_SelfServiceGenerics_MetaDataFIN
SAP_R3_SelfServiceGenericsFIN
let me know this
points if problem solved
please close thread if problem solved
thanksyou,
regards
Vijai

Output module failed 1610153464

I am running CS5 on a Mac 10.6.6. I have both QTX and QT 7.6.6 installed
Every time I render, it gives the following error message:
An output module failed. The file may be damaged or corrupted. (-1610153464)
I've tested the files on a different machine and they open and render out fine.
I'm having these issues and I don't have any plugins installed.
Re-Installed everything multiple times, trashed preferences, removed plugins from the Application support and still no luck.
The only thing that works for me is outputting to a PNG or JPEG sequence.
If I try to render using the Animation preset, It gives the error message.
I also have been getting a weird "MooV" error message when I try to import certain types of quicktime files. Not all just a few random ones.
All of this leads me to believe it is a Quicktime issue.
Please can you help. Other than doing a complete clean operating install, which i am doubting will work.
Robin Souter

hey todd,
good thinking, I was just trying the very same thing. alas when I try to open my AE project in Media Encoder I get the message
"Could not connect to Adobe After Effects. Please verify that Adobe After Effects and Adobe Dynamic Link components are installed."
I'm scratching my head, this also worked yesterday.
Could it be anything to do with de-activation? I have cs5 installed on my workstation in my studio.
I also have it installed on my laptop at home. do I need to contact Adobe each time I want to use 1 machine or the other?
Also ever since installing cs5 on my laptop I get the following message each time I launch After Effects (dont know if its connected as I normally just click ok and use AE as normal)
"Runtime Error! This application has requested the runtime to terminate it in an unusual way.
Please contact the application's support team for more information"
or maybe I didn't run the adobe uninstaller cleaner utility to get rid of traces of old versions, before installing cs5 to my laptop
thanks
ste

Urgent!! 'Screen output without connection to user'

Hi,
Our requirement is to send an e-mail in the outlook when a workflow is triggered.
On trigerring, the WF is started but in TRXn SWEL the RFC status says <i><b>'Screen output without connection to user'</b></i>. In transaction SM58, i get the status 'Screen output without connection to user' against the function module 'SWW_WI_CREATE_VIA_EVENT' . I have seen in the previous threads that pop-up could be one of the reasons. But i havnt used any pop-ups. The WF consist of only one step 'Send mail' in which we give the users email ID. Can any one help me on this issue?
P.S: I was sucessful in sending mail to outlook previously, but suddenly show this type of error. Is it because of the change in configuration which our basis team do?
Thanks in Advance
S.P.K

did u solve this problem if yes how did u resolve this...i am getting the same error...

"Screen output without connection to user" execption in CRM webui

Hi All,
My requirement is as follows:
When user changes the status of a service request in WEBUI, the service request number should be sent to ECC through an RFC function call.
For this I have created an action profile using method call(by creating a new implementaion for the BADI EXEC_METHODCALL_PPF). Now when I call the RFC FM, I am getting the exeception "Screen output without connection to user". It also says an execption "DYNPRO_SEND_IN_BACKGROUND" is created in the target system ECC. There is no issue with the action profile or BADI implementaion.
I searched in SDN and found that the reasons might be any one of the following
RFC user authorizations
called FM might be opening a pop-up dialogue which results in connection break.
But when I call the same FM from a report program, it is not giving me any exception. I mean this exception occurs only when I call the RFC FM from the above BADI.
Any pointers on this will be very helpful.
Regards,
Narendra

HI,
Is any technical involvement would be there or Basis team will look into that.
actually in back ground job there is rfc functional module is calling.
Can u give some more inforamtion then it would be very helpfull to me.
Thanks & Regards,
Raghunadh.

Reload of an ArchiveFile - Error "Screen output without connection to user"

Hello,
I would like to put the whole content of a Cube into an other Cube by using DataMart and Archive Files.
So I created an Archive Object for the Source Cube and produced an Archive File. In the Archive Manager the status is green and every think seems to be alright.
Now I created an UpdateRule for the Target Cube. For the DataMartDataSource of the Source Cube I created an InfoPackage with the Target Cube as a Target. In the Data Selection of the Datapackage I press on the Archive Selection Button and then I choose archive only and then pressed the Archive File selection button and now I get the error message Screen output without connection to user. Message no. R3299
What is wrong. Could anybody help me.
Thanks in advance.

Hi,
I am new to SAP BW 3.5 but I have a BW 3.5 archiving asignment to do. I encountered the same problem i.e. 'Screen output without connection to user' while pressing the Archive File Selection. It appears to me that clicking the Archive File Selection button eventually calls (I am still using BW 3.5 by the way so i am not sure about BI 7)
   CALL FUNCTION 'RSAP_ARCHIVE_ADMIN_REMOTE'
        DESTINATION S_DESTINATION
        EXPORTING
             I_OLTPSOURCE     = ROARCHD200-OLTPSOURCE
        TABLES
             C_T_SELECT       = L_T_SELECT
             E_T_MESSAGES     = L_T_MESSAGES
        EXCEPTIONS
             CANCELED_BY_USER      = 1
             COMMUNICATION_FAILURE = 2 MESSAGE L_MSGTXT
             SYSTEM_FAILURE        = 3 MESSAGE L_MSGTXT.
   IF SY-SUBRC GT 1.
     MESSAGE E299 WITH L_MSGTXT(50) L_MSGTXT+50(*).
   ENDIF.
Check your s_destination variable - this is your rfc destination that you define via SM59. From SM59, open this rfc destination type R/3 connection, see whether you can click on the "Remote Logon" button. It should be able to launch another screen. If it does not, get your BASIS to help out - maybe the userid used in this rfc destination should be changed to using "service" user type. I did this and it worked for me (previously it was configured as a "system" user type). Or perhaps you should stick to "system" user type and ask BASIS to grant the necessary profiles (I am not a BASIS so I am making a wild guess here).
The other way to test this out is to test the function module RSAP_ARCHIVE_ADMIN_REMOTE by entering the archived object in I_OLTPSOURCE parameter. Then test without RFC target sys, and then test with RFC target sys. If it works only without RFC target sys (and not with RFC target system field populated), then we can conclude that there is something wrong with the rfc destination and/or userid.
I hope this helps....

Quicktime Export Error: "An output module stopped responding."

I'm experiencing an odd export error whenever I use any Quicktime codecs:
"After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
System specs:
Windows 7 64-bit
Intel i7-2600k processor
8 GB RAM
GTX 580 GPU
Software:
Adobe CS6
AE Plugins include Tracode Suite 12 and Optical Flares
Quicktime 7.7.3
Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
Josh

Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
*EDIT*
That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
Thanks,
Josh

Need help adobe bridge cc output module

I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!

oh,my system is windows 8.1. sorry, lol.

Adobe output module in Bridge CC gives Failure at processing

The output module in Bridge CC isn't standard installt any more, so you have tot do it you self!!!!!!
After instaling it is visseble and it seemed to work, but during processing it gives the error " 1/0- fout ( = failure in dutch)
Who know an answer.

Hello, gooie Dag! Since The output module is an additional module, your question is not exactly one for beginners, I'm moving this discussion to the Bridge forum.

Bridge Help / Install Adobe Output Module is Not working

New computer so switched to the Maverick OS and moved my CS6 over. Lost my Output Module in Bridge. Went through the all of the resets and downloads recommended by Adobe and I still have not had any success in getting the module back. Would prefer not to reinstall. Any ideas

What do you mean by "moved 'my' CS6 over" ? ???
Always install applications from scratch, from the original media. No exceptions, ever.
"Migrating", "transferring", Copying, "moving", etc., are GUARANTEED to bring you nothing but grief.

Screen output without connection to user and other portal trouble

I created filter. Saved it. If I tried edit it - it was allow. But after some time and after I used it in a query I trying edit the filter and can't do it! My rsplan portal page write to me:
Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE.
ST22:
Dynamic error:   DYNPRO_SEND_IN_BACKGROUND
Short text:
     Screen output without connection to user.
What happend?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTRD" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
user, transaction...
    Client.............. 100
    User................ "PI_JCO_RFC"
    Language Key........ "E"
    Transaction......... " "
    Program............. "SAPLSTRD"
    Screen.............. "SAPLSTRD 0302"
    Screen Line......... 0
    Information on caller of Remote Function Call (RFC):
    System.............. "########"
    Database Release.... 645
    Kernel Release...... 645
    Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "
What happend? What I need to do? I try delete filter from query but it isn't make it editable.
Another bug: I can delete this filter and can copy them into new filter. But when I delete it and try copy another filter to deleted technical name then system said that "element with same name already exist". How to delete the filter correctly?
One more bug:
I work with russian language. And on personalisation page of portal options I selected "Russian (Russia)" (There are variant simply "Russian" in list of langs but I tried it too with the same result) BUT I have only interface with russian lang and TEXTS of objects got for eng lang anymore (and in damp we can see that lang key = "E"). Where it must be corrected?
And for last in this message: I can create an object or edit it but can see that object was last edited by PI_JCO_RFC. Is it right? So, how I will can see who change the object at last time?
Help me please!

>
Deepti Maru wrote:
> What object text you are talking about for which language is english but you want russian?
I try describe it again.
If I logon via SAPlogon with russian language in RSA1 I can see descriptions of objects for russian lang (and new objects which I will create will be with russian description if I enter it). In portal (rsplan) in personality I set russian language ang get the russian interface BUT it get descriptions for ENG and in this way I can't see any descriptions - only technical name because all objects was created with russian lang. So, what I need to do for get russian descriptions of objects in portal?
And another trouble - when I create object (for example - aggregation level) in portal then I can't see descriptions of it in RSA1.
And from this I have another question too. How I can (if it possible) use english interface and russian descriptions of objects in both portal and SAPLogon?

After Effects CC Output Modules on Render Only Machines

Hi there, I'm having an issue with custom Output Module Templates and my renderfarm:
After Effects CC 12.0.0.404 (showing as up to date in Creative Cloud)
Mac OS X 10.8.4 (Latest Mountain Lion version)
Mac Pro 2.93 GHz 8-Core, Radeon 5870, 32GB RAM and with Blackmagic Decklink Extreme 3D+
Remote Machines (there are four) are Mac Pros as well (Quad-core, running 10.7.2 with 16GB RAM), using the ae_render_only_node.txt file in their user Documents folder.
The exact error:
aerender ERROR: No output module template was found with the given name.
I am trying to get a renderfarm working with After Effects CC (see exact version above). Unfortunately, I need custom output modules and I can't seem to get the render slaves to recognize them. I found older threads on this exact issue, but no solution was found.
I am using commandline aerender in OS X terminal to start a render with a basic test scene.
To simplify things, I have tried testing this on one render slave machine at a time... Same result everywhere.
Here's what I've tried:
I exported a .aom file from my main machine (where I have my desired custom Output Modules) and attempted to bring it in on the render slaves. However, because the render slaves are render only, (they have ae_render_only_node.txt in their Documents folder), the ability to import Output Modules is disabled in After Effects (it opens as the After Effects Render Engine, and the Edit>Templates menu is greyed out).
Next, I thought I'd try copying the main machine's /Users/(user)/Library/Preferences/Adobe/After Effects/12.0 folder over to the render slaves, thinking that would get whatever preference file to them that's needed to define the output modules. No luck. Launched After Effects (which loads as After Effects Render Engine) and reset my disk cache preferences (so they weren't still the main machine's). Tried aerender again... no luck. Same error:
aerender ERROR: No output module template was found with the given name.
After that, I thought it would be a good idea to sign out of Adobe Creative Cloud on the main machine, and try logging into the render slave machine with my full UserID and Password and temporarily remove the ae_render_only_node.txt file. Then, I'd import the .aom file in the full version of AE... I tried this and success! The renders work... they find the Output Modules no problem. Only issue is, as soon as I sign out, and switch to using the ae_render_only_node.txt file, the Output Modules are not found. Not sure what's going on-- if the Output Modules are being disabled by the ae_render_only_node.txt file? Or maybe signing out of my Adobe ID is removing the preferences that determine Output Modules? Don't know where the Output Module preferences are stored to be able to tell.
Next attempt: I thought I'd try syncing my preferences with Creative Cloud. I made sure to check After Effects Sync Preferences to ensure that Output Modules are set to sync. I did a sync where I uploaded my preferences from the main machine. Then, on the render slaves, I ran Sync Preferences, and chose to download preferences. Works when signed in, but not when used as a render only node. When it's a render only node, it still prompts me to Download the Sync Preferences and Quit the Application, which I do, but nothing seems to happen. I try aerender again, and still the same error:
aerender ERROR: No output module template was found with the given name.
I can't seem to find any info on where Output Modules are actually stored (apparently they're not anywhere in the User/Library/Preferences/Adobe/After Effects/ folder?). Are render only nodes not allowed to have custom Output Modules? Not even for something as simple as the Multi-Machine Sequence with a post-render action of Set Proxy enabled?
Any help is greatly appreciated!
Thank You.

I've verified this problem and filed a bug. Sorry about the hiccup.
I've trying to pin down why this happens, and while I don't have a full explanation yet I think I've stumbled onto a workaround:
Trash the prefs on the render machine.
Enable the ae_render_only_node.txt file.
Launch AE and then quit. <- This is a critical step. More on this later.
Disable ae_render_only_node.txt file.
Launch AE.
Add your Output Module template.
Quit AE.
Enable the ae_render_only_node.txt file.
After you do this, I highly recommend making a backup copy of the Adobe After Effects 12.0 Prefs-indep-output.txt file. Just in case. I've had the failure reappear.
Now test with aerender and let me know if that works. It has on my machine.
Why does this matter? When you run AE with the ae_render_only_node.txt file enabled, it appears to add a new section to the preferences: "Output Module Preference Section v28-TRIAL". It's the TRIAL part that is important. Without it, AE doesn't seem to be able to keep track of the OM's when in render_only_node mode. And if you disable the ae_render_only_node.txt file, AE has a tendency to destroy the TRIAL section (I'm still tracing why that happens).
Now, should this not work for you, I recommend you work around the problem by adding your comps to the render queue in each project. When you do that, and change your aerender flags appropriately, you can render to your desired settings without specifying OMtemplate parameter.
> I can't seem to find any info on where Output Modules are actually stored (apparently they're not anywhere in the User/Library/Preferences/Adobe/After Effects/ folder?).
You probably already discovered this. In After Effects CC the OM data is stored in the Adobe After Effects 12.0 Prefs-indep-output.txt file. In older versions of AE, a single pref file such as Adobe After Effects 11.0-x64 Prefs.txt holds all of this data.
Let me know if that workaround does the trick for you. If I get more information on the cause of the problem I'll update you.

Reg:Screen output without connection to user.

Hi All
I am having an issue when I open Form 16 application in ess role under benefits and payments subfolder .
But I am getting an Critical error as shown below .
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_Failure.
Can any please guide me how to resolve this error.
As its very urgent requirement ..
Thanks & Regards
Deepika
Edited by: deepika_indian on Feb 9, 2012 7:49 AM

Hi,
Please check out in the Infotype 105 Sub Type 0001, Is there any user maintained there, As it is
required.
I could see a possible problem, in the past we've
encountered issues like this, but relevant to environments using Central User Administration(CUA). Please refer to SAP Note no:350619. The note makes following changes to the table t77SO by changing the value of TRSPCORR to ''X'' or 'T'. Please verify if the note is relevant to your environment if so kindly apply.
Please look at this [Help|http://forums.sdn.sap.com/thread.jspa?threadID=1038064] and [Help-1|http://forums.sdn.sap.com/thread.jspa?threadID=1925679]
Hope This is Help full for you!!!
Best Regards
Vijay K

Output module connections

Similar Messages

Maybe you are looking for