Output not getting displayed in Forms

Hi,
I have created a sample VC application using BAPI_BANK_GETDETAIL BAPI.
I am passing bank key and bank Country as inputs to the Bapi using the input form and this bapi returns
Bank Details and Address Details. I am trying to display the address details into a form...
The data service is working fine.
But When I deploy, after entering the input fields and submitting the corresponding address details are not getting displyed in the output form.
I am not able to understand the problem with forms... If the output is in the form of a table it is working fine.. But for forms it is not working... I tried with so many other BAPIS..it is the same case for output forms...
Request you to kindly ket me of if you have any idea for the above mentioned problem.
Regards,
Shilpa B.V

Hi Sandeep,
I have Selected 5 fields to be displayed in the form and they are automatically mapped...
I am not getting if I am missing anything here... Beacuse is it very straight forward, but still it is not working..
No, I am not getting any message!
Kindly let me know if you have any more ideas...
Regards,
Shilpa B.V

Similar Messages

Adobe form output not getting displayed for the whole length of the page

Hi All,
I have developed an adobe form using webdynpro application. While testing, the output(pdf) does not occupy the entire page/screen from end-user side. But when I test the same from my side, the output appears fine . Could anyone suggest me on this?
Regards,
Allwin.

Did you check the resolution at end user side? Is it different from your resolution?
To overcome this check what is the height and width you have specified for InteractiveFormUI element in your Web Dynpro application. Have you specified in pixels like 300px? You need to enter it as 100% for both.
Chintan

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Data is not getting displayed in my form

hi,
i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
but it is not getting displayed................

Hi!
on the application toolbar on the top a icon is there for Field list on/off.
click on it.
below left hand side field names will be displayed.
now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
Regards.

Object form is not getting displayed for few users

Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.

Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari

Adobe Form not getting displayed on the portal

Hi,
From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning but adobe form still not getting displayed.
Please help.

Later

Form not getting displayed in sap b one

I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.

Option Strict Off
Option Explicit On
Friend Class frmEmployee
    Private WithEvents SBO_Application As SAPbouiCOM.Application
    Private objForm As SAPbouiCOM.Form
    Public Sub New()
        MyBase.New()
        '// set SBO_Application with an initialized application object
        SetApplication()
        LoadFromXML("frmEmployee.xml")
        'LoadFromXML("MySimpleFormxml")
        '// Get the added form object by using the form's UID
        objForm = SBO_Application.Forms.Item("F_4")
        '// Show the loaded Form
        objForm.Visible = True
        '// Saving the Form as an XML file
        '// although it already exist as an XML file
        '// it is good for practice
        'SaveAsXML(objForm)
    End Sub
    Private Sub SetApplication()
        '// Use an SboGuiApi object to establish connection
        '// with the SAP Business One application and return an
        '// initialized appliction object
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        '// by following the steps specified above, the following
        '// statment should be suficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        '// connect to a running SBO Application
        SboGuiApi.Connect(sConnectionString)
        '// get an initialized application object
        SBO_Application = SboGuiApi.GetApplication()
    End Sub
    Private Sub LoadFromXML(ByRef FileName As String)
        Dim oXmlDoc As Xml.XmlDocument
        oXmlDoc = New Xml.XmlDocument
        '// load the content of the XML File
        Dim sPath As String
        'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        sPath = "D:\Final\Forms"
        oXmlDoc.Load(sPath & "\" & FileName)
        '// load the form to the SBO application in one batch
        SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
    End Sub
    Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
        Dim oXmlDoc As Xml.XmlDocument
        Dim sXmlString As String
        oXmlDoc = New Xml.XmlDocument
        '// get the form as an XML string
        sXmlString = Form.GetAsXML
        '// load the form's XML string to the
        '// XML document object
        oXmlDoc.LoadXml(sXmlString)
        Dim sPath As String
        'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        sPath = "D:\Final\Forms"
        '// save the XML Document
        oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
    End Sub
End Class

Potential & Development Forms are not getting displayed

Hi Gurus,
Here goes another problem which I am facing regarding Forms, I created Potential & Developemt forms in Talent Assessment in DEV-100(golden client) & copied it to DEV-300,via SCC1 (another client to which portal is linked), but still the forms are not updated in 300, though 1node & table V_T77TMC_P_V got updated in 300 after i copied the req.
The complete customization is done in the TR , including the manual transport of the Forms,still they are not getting displayed in 300, kindly help!!!!!!!! its urgent
Regards
Bharti Sood

Hi Bharti Sood,
It appears that all elements were not transported. Did you go through these customizing tasks in IMG > Talent Management and Talent Development > Talent Assessment:
- Transport Forms
- Transport Process Form Assignments
- Transport Scales
These elements do not get transported automatically.
Best regards,
Luke

Payslip(HR Forms) is not getting displayed

Experts,
We are using HR forms for pay slip, i am not able to display/print form for one of the employee. How to solve it/
Pls advice.
Also if we deleted any wage types which has paid in the past run, system is doing retro and getting stored in RTs. But it is not getting displayed in the form.
My ABAPer is using standard function for picking the retro values, since the wage type is completely deleted (bec of ZERO value), it is not getting showed in slip.
Pls advice

Medi reimb allowance has been paid to an employee in apr 11 and then may 11 client realised, he is not eligible for that. so they need to recovery it fully. it was a master data issue while go live time in april.
since it is null value, we had to delete it completely, so the system performs retro and getting paid. But it is not getting displayed in pay slip HR Forms.
ABAPer who developed the pay slip is saying, since we deleted the component it is not getting displayed by standard function. other scenarios like change value of wts, perfectly showing the retro and actual payments.

ADOBE Interactive Form not getting displayed in Browse

Hi,
Currently I am working on EhP4 project on ECC 6.0 environment. For HCM, We have interactive ADOBE forms for MSS. While testing we found that all buttons are displayed in a browser (we are are window 7 IE 8 ) but interactive form is not getting displayed in the browser (Fill out Form as part of MSS). It only displays a line
Checked ADS configuration as per oss note and works ok. Did HTTPWATCH - browser is getting (GET) the Adobe forms with values but not displaying it. If I copy URL from HTTPWATCH GET line in a separate browser window it displays the form.
Thanks in advance your help.
Regards
Jitendra Pongurlekar

Hey Chris (and others),
We were having this same problem, and this Note fixed the issue (thanks!). However, we are still experiencing another issue with HCM Processes and Forms under EhP4. Before this Note, it took about ten minutes before "single line display" would show up. Now after the Note, we get the full form, but it still takes ten solid minutes of waiting before it appears in the window. We're pretty sure it's not a Portal issue, nor an ADS issue, but something with the web dynpros on the ABAP side. However, we have not yet been able to resolve it. Anyone else run into this performance problem with HCMP&F after upgrading to EhP4? We don't have the problem with EhP3.
Best regards,
Matt

Adobe Form NOT getting displayed in WebDynpro Modal Window (Pop Up)

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
It seems to be available only for ABAP version. I cant find it in the java version.. check this..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/656442a1c4de54e10000000a155106/frameset.htm">Help SAP Link for Java Reference</a>
And even in ABAP , the pre-requisite seems to be installation of ACF,
The exact words
<i>
Adobe Reader (>= 7.0) and, if you are creating interactive forms, also the ActiveX Control Framework (ACF) installed on your computer. Also see SAP note 834573.</i>

Adobe Form not getting displayed in WebDynpro Modal Window

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
even though this is quite an old post, it still could be worth for someone to have a look at Note 1342716.
Michal

In produstion one window in smart form is not getting displayed

hello everyone,
i had created one smartform report,
its getting executed on development,
but on production only one window not getting displayed,rest of the windows are displaying.
can you give me some suggestions so i can make changes in smartforms.
thaking ya
chitra

First check for window conditions
which window is not displaying secondary window or copies window or Final window or address window
and tell me the clearly

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

Output not getting displayed in Forms

Similar Messages

Maybe you are looking for