Output NX7950GT-VT2D512EZ-HD

Hi,
I have a great problem with my graphic card  NX7950GT-VT2D512EZ-HD.
My HTPC is composed by a motherboard asus p5wdh deluxe with graphic card msi  NX7950GT-VT2D512EZ-HD.
A few minute ago I built my htpc.
I connected the output of my graphic card to my lcd loewe xelos A32 with a cable DVI-D (dual link) - HDMI.
Well, in my tv the image is orrible, the color are not vivid and the image shakes.  >:(
I tryed to install the vga driver from msi cd but nothing happened.
I tryed to connect my home pc with an ati x600 with the same clable to my tv and the image is optimal.
I supposed that my msi card has some problems 
I'm very angry!!!

Quote from: spinmar on 28-December-06, 17:52:32
No because in relevant post it's suggested to use always the new nvidia driver instead of msi vga driver.
In your opinion using msi driver can i solve my problem?
it possible.
get Driver Cleaner and remove currently drivers.
then get 91.47 from Nvidia http://www.nvidia.com/object/winxp_2k_91.47.html and re-test.
if no go retry with MSI Drivers.

Similar Messages

  • NX7950GT-VT2D512EZ-HD driver

    Hi (in italian Ciao  ),
    yesterday I installed my new msi graphic card (NX7950GT-VT2D512EZ-HD) on mu asus p5wdh deluxe.
    After that, I installed the driver in the cd.
    I have a question about driver version.
    I see that the driver version on msi site form my card is 91.47.
    On nvidia site I see that the driver version for cards based on 7950GT is 93.71.
    Why are they different?
    Can I install the new driver version on nvidia site?
    Thanks for your support
    Best regards
    Marco

    Thanks very much 
    I will update my card driver tomorrow.
    Thanks again 
    Bye

  • 9-pin mini DIN socket

    Does NX7950GT-VT2D512EZ-HD have a 9-pin mini DIN socket? I want to connect the card to my televison via s-video. Is this the correct cable: http://www.hama.de/portal/articleId*125830/action*2563/searchMode*1/bySearch*34098#1 ??
    Does anybody know where I can buy a cable/adapter (HDTV / Video-out connection cable) that is similar to the one that came with the card?
    All the best!
    eha

    Quote from: eha on 25-January-07, 18:17:12
    From MSI technical support team: "Besides, NX7950GT-VT2D512EZ-HD don't have a 9-pin mini DIN socket and please refer to the link to get more information: http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=765
    What ???
    Does anybody know where I can buy the adapter/cable that came with the card?
    eha
    as i can see its 9pin mini DIN socket...
    "Does anybody know where I can buy the adapter/cable that came with the card? "
    in some computer store/shop.

  • How to install capture drivers from cd?

    Hello,
    i just bought the NX7950GT-VT2D512EZ-HD card and installed it. it should have video in but when i click on the "install capure drivers" option on the cd menu nothing happens. everthing else i click on in the menu works. the pop up information says that you can only install the drivers if your card have the video in option. what could be the problem ? and what could i do to fix it?
    (windows xp, core2duo 2,13, 2gb DDR2 FSB800, ASUS So. 775 P5B-E Plus).
    thanks for any help!

    latalante,
    Download and install the last nVidia ForceWare & WMA Drivers
    Then take the MSI CD, set it on your desk, go to the kitchen and pour your favorite cold drink. Come back to your desk and put your drink on the CD. That is about all they are good for.
    Take Care,
    Richard

  • GeForce NX7900GS-T2D512E vs GeForce NX7600GS Noise

    Hello,
    I expect to start a new build shortly, and I am trying to build a low-noise computer that will last and maintain relevance for a few years and mainly support photoshop.   
    My intended system:
    * 2 x Seagate Barracuda ES 750 GB SATA drives, RAID1
    * Antec SOLO Quiet MidTower case
    * MSI 875X Platinum with a Core 2 Duo, 2.4 GHz Processor with 4MB Cache
    * Corsair TWIN2X2048-6400 2GB Kit DDR2-800 XMS2-6400
    * 2 x Sony DRU-830A 18X Double Layer DVD±RW
    * Zalman ZM600-HP HeatPipe Cooled 600w Modular Power Supply
    * Samsung 244T-Black SynMaster 24in Analog/Digital LCD
    * MS-VISTA Home Premium 64-Bit
    * MSI GeForce 7600GS-256 or 7900-GS-512
    My impression is the GeForce NX7600 sets the standard for low noise, but perhaps the NX7900GS-T2D512 doesn't generate much more noise?     Any reviews or info that has quantified the noise for the 7900GS-512?   I've found relatively good noise accounts for the 7900GS-256 so I presume the 7900GS-512 is similiar and will maintain relevance longer than say the 7600-256, and if the noise is low enough I'd probably rather buy the 7900GS-512.  Comments?
    Thx. 
    Scott

    if you are looking for low noise, should get some VGA with passive cooling or water cooling solution.
    NX8600GTS-T2D256EZ-HD
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=1197&maincat_no=130#
    NX7950GT-VT2D512EZ-HD
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=1045&maincat_no=130&cat2_no=136
    NX7900GS-T2D256EZ-HD
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=1065&maincat_no=130&cat2_no=136
    there is much other choices as well with passive solutions, or Water cooled, take a look them here:
    http://global.msi.com.tw/index.php?func=prodpage2&maincat_no=130&cat2_no=136

  • Enable SLI mode on K8N SLI Platinum

    Hello, I got an older AMD64 3500+ CPU on a MSI K8N Platinum SLI motherboard, model 7100 (with a flip-board SLI switch), 2x512Mb DDR400 Corsair XMS512C2 memory, a Soundblaster Live! 4.1 soundcard on a PCI slot and two GeForce 7950 GT 512Mb DDR3 PCI-E cards. Power is supplied by a Corsair HX620 620W with separate power cables to each card. No signs of instability on the system whatsoever (no overclocking applied). Built-in sound card, Firewire, RAID and other integrated peripherals disabled in BIOS.
    I recently got the second GFX card from a friend, and they are likely not from the same manufacturer. I have installed both cards, flipped the SLI board to "SLI mode", installed the SLI bridge that came with the motherboard, yet I can't get SLI to fire up. Both cards have exactly the same BIOS revision and exactly the same clock speed (core and memory) when checked with the ESA tools from Nvidia.
    I have reinstalled the newest Nforce4 and Geforce drivers, but to no avail. Both cards are installed and enabled in Windows XP (32bit SP3), but I don't get any options for SLI in the control panel, and I don't see any performance difference in-game. I have looked in the BIOS for SLI-enable-settings but found none.
    Is there anything else I can do to enable SLI mode for the system? Or are the cards simply incompatible? Reflashing with some stock BIOS on both cards, can that make them compatible? Or is maybe the SLI bridge not seated properly? What exactly ARE the requirements for two cards to match, anyway?
    Further, does anyone know the real-world implications of disabled PCI prefetch, as this was disabled in the last update for the motherboard? I use a PCI soundcard, and have some performance issues in games that seems to be somewhat correlated to sounds being played.
    Best regards, Martin "xarragon" Persson

    Quote from: Svet on 12-August-09, 20:23:52
    which one? http://eu.msi.com/index.php?func=searchresult&keywords=NX7950GT
    Min seems to be the "MSI NX7950GT - VT2D512EZ - HD", latter one with VIVO support. It does have passive cooling using heatpipes, and a sticker on it says what I put in double quotes above. That would be this card:
    http://eu.msi.com/index.php?func=proddesc&maincat_no=130&prod_no=1045
    The sticker/model name for the ASUS card says:
    ASUS P455 REV: 1.00
    EN7950GT/HTDP/512M/A
    I suppose it ought to be this card? http://www.asus.com/product.aspx?P_ID=5XmjRmrwz3r9rWuv
    I have also used GPU-Z to pull the following info from the ards, when they were connected one-by-one to the primary PCI-E 16X slot with the SLI bridge set to "non-SLI" mode.
    GPU-Z: MSI BX7950GT-VT2D512EZ-HD:
    GPU: G71 Revision: A2
    Device ID: 10DE-0295
    BIOS Version: 5.71.22.42.06
    Subvendor: MSI (1462)
    ROPs: 16
    Bus interface: PCI-E x16 @ x16
    Shaders: 24 Pixel / 8 vertex
    DirectX support: 9.0c / SM3.0
    Pixel fillrate: 8.8 GPixel/s
    Texture fillrate: 13.2 GTexel/s
    Memory type:  GDDR3
    Bus width: 256 Bit
    Bandwidth: 44.8 GB/s
    Memory size: 512 Mb
    GPU Clock: 550 MHz
    Memory: 700 MHz
    GPU-Z: For ASUS P445
    GPU: G71 Revision: A2
    Device ID: 10DE-0295
    BIOS Version: 5.71.22.42.06
    Subvendor: ASUS (1043)
    ROPs: 16
    Bus interface: PCI-E x16 @ x16
    Shaders: 24 Pixel / 8 vertex
    DirectX support: 9.0c / SM3.0
    Pixel fillrate: 8.8 GPixel/s
    Texture fillrate: 13.2 GTexel/s
    Memory type:  GDDR3
    Bus width: 256 Bit
    Bandwidth: 44.8 GB/s
    Memory size: 512 Mb
    GPU Clock: 550 MHz
    Memory: 700 MHz
    Both cards work fine, with the MSI card being slightly hotter due to the passive cooling. The ASUS one got an aftermarket Zalman VGA cooler mounted.

  • Total is not getting displayed in the ALV output.

    Hi,
    Total is not getting displayed in the ALV output.
    I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
    Are  there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
    source code:
    DATA: layout TYPE slis_layout_alv,
          IT_eventS  TYPE slis_t_event,
          fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    TYPES: BEGIN OF ty_tab,
          belnr TYPE dberchz-belnr,
          belzart TYPE dberchz-belzart,
          net TYPE dberchz-nettobtr,
          END OF ty_tab.
    DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
    SELECT belnr belzart nettobtr
      FROM dberchz
      INTO TABLE lt_tab[]
    WHERE belnr eq '000000000001'.
      if sy-subrc ne 0.
      ENDIF.
    *  defining layout
    layout-colwidth_optimize = 'X'.
    layout-def_status = 'X'.
    *defning event
    *event
    *defining field catalog
    fcat-col_pos = 1.
    fcat-fieldname = 'BELNR'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 2.
    fcat-fieldname = 'BELZART'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 3.
    fcat-fieldname = 'NET'.
    fcat-tabname  = 'LT_TAB'.
    fcat-do_sum = 'X'.
    APPEND fcat.
    *calling alv
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
      EXPORTING
        i_callback_program             = 'YZ_PLR'
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   IT_EXCLUDING                   =
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        is_layout                        = layout
        it_fieldcat                      = fcat[]
        i_tabname                        = 'LT_TAB'
        it_events                        = IT_EVENTS[]
    *   IT_SORT                          =
    *   I_TEXT                           = ' '
      tables
        t_outtab                         = lt_tab[]
    * EXCEPTIONS
    *   PROGRAM_ERROR                    = 1
    *   MAXIMUM_OF_APPENDS_REACHED       = 2
    *   OTHERS                           = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    Thanks,
    Gaurav

    Hi
    No I don't think, this is my code (based on your code) and it works fine:
    TYPE-POOLS SLIS.
    DATA: BEGIN OF LT_TAB OCCURS 0,
           BELNR LIKE BSEG-BELNR,
           GJAHR LIKE BSEG-GJAHR,
           WRBTR LIKE BSEG-WRBTR,
           WAERS LIKE BKPF-WAERS,
          END OF LT_TAB.
    DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
          IT_EVENTS  TYPE SLIS_T_EVENT,
          FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
          REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
    START-OF-SELECTION.
      FCAT-COL_POS       = 1.
      FCAT-FIELDNAME     = 'BELNR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'BELNR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 2.
      FCAT-FIELDNAME     = 'GJAHR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'GJAHR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 3.
      FCAT-FIELDNAME     = 'WRBTR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-CFIELDNAME    = 'WAERS'.
      FCAT-REF_FIELDNAME = 'WRBTR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      FCAT-DO_SUM        = 'X'.
      APPEND FCAT.
      FCAT-COL_POS       = 4.
      FCAT-FIELDNAME     = 'WAERS'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'WAERS'.
      FCAT-REF_TABNAME   = 'BKPF'.
      FCAT-DO_SUM        = SPACE.
      APPEND FCAT.
      SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
        WHERE BUKRS = 'MAAB'
          AND BELNR = '0000000001'.
      LT_TAB-WAERS = 'EUR'.
      MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
    *CALLING ALV
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT   = LAYOUT
          IT_FIELDCAT = FCAT[]
          I_TABNAME   = 'LT_TAB'
          IT_EVENTS   = IT_EVENTS[]
        TABLES
          T_OUTTAB    = LT_TAB[].
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
    I've also inserted a currency field
    Max

  • Help with if statement in cursor and for loop to get output

    I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
    I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
    Here is my cursor:
    /*Cursor for Email procedure. It is working Shows userid and the string
    You need to update these folders*/
    DECLARE
    a_user varchar2(200) := null;
    v_assigneduser varchar2(20);
    v_folderrsn varchar2(200);
    v_emailaddress varchar2(60);
    v_subject varchar2(200);
    Cursor c IS
    SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
    MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
    trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
    --MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
    FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
    WHERE f.foldertype = 'HJ'
    AND f.statuscode NOT IN (20, 40)
    AND f.folderrsn = fp.folderrsn
    AND fp.processrsn = fpa.processrsn
    AND vu.userid = fp.assigneduser
    AND vu.statuscode = 1
    GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
    ORDER BY fp.assigneduser;
    BEGIN
    FOR c1 IN c LOOP
    IF (c1.assigneduser = v_assigneduser) THEN
    dbms_output.put_line(' ' || c1.folderrsn);
    else
    dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
    END IF;
    a_user := c1.assigneduser;
    v_assigneduser := c1.assigneduser;
    v_folderrsn := c1.folderrsn;
    v_emailaddress := c1.emailaddress;
    v_subject := 'Subject: Project for';
    END LOOP;
    END;
    The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
    emailaddress
    Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
    v_folderrsn
    v_folderrsn
    etc
    [email protected]......
    Subject: 'Project for: ' Jim...'not updated in the last 30 days'
    284087
    292709
    [email protected].....
    Subject: 'Project for: ' Kim...'not updated in the last 30 days'
    185083
    190121
    190132
    190133
    190159
    190237
    284109
    286647
    294631
    322922
    [email protected]....
    Subject: 'Project for: Joe...'not updated in the last 30 days'
    183332
    183336
    [email protected]......
    Subject: 'Project for: Sam...'not updated in the last 30 days'
    183876
    183877
    183879
    183880
    183881
    183882
    183883
    183884
    183886
    183887
    183888
    This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
    Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
    JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
    JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
    KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
    KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
    KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
    KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
    KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
    KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
    KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
    JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
    JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
    SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
    PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
    PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
    NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
    NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
    NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
    NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
    NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
    NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
    NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
    NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
    NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
    NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
    NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
    NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
    NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
    NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
    NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
    MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
    [email protected]/27/2004.......3/8/2004............1631
    How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
    Edited by: user4653174 on Aug 25, 2008 2:40 PM

    analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
    CASE
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
    Incorporating either of these into your query should assist you in returning the desired results.

  • Comas(,) are not getting displayed in the output while using OO ABAP

    Hi All,
    I am using ABAP objects to display the ALV report in which there is a requirement to output Quantity fields. The Quantity fields are getting displayed without comas ','. Please help me in getting back the comas in the output.
    Eg:
    Below logic is used in my program.
    Class name: cl_salv_form_layout_grid
    Code:
      obj_footer->create_text(
            row    = v_row_cnt
            column = v_col_cnt
            text   = Quantity).
    Expected output:
    39,545.000
    Current Output:
    39545.000
    Thanks in advance for your help.
    Thanks & Regards,
    Siva.

    Hi,
    Please check if the images are in the server and in the /images alias path.
    thanks,
    Sharmila

  • Getting null and 0 outputting to screen or file.

    Hi everyone,
    I am trying to make a phone book program in Java. However the main functions of the phone book (adding and displaying contacts) isn't really working, it is outputting null or 0.
    Here is a class to create an object for family members:
    import java.util.StringTokenizer;
    public class phoneFamily extends phoneNumbers
         protected int home;
         public phoneFamily(String name, String address, int mobile, int business, int home)
              super(name, address, mobile, business);
              this.home = home;
         public phoneFamily(StringTokenizer P)
              super(P);
              while (P.hasMoreTokens()){home = Integer.parseInt(P.nextToken());}
         public void setHome(int home)
              this.home = home;
         public int getHome()
              return home;
         public String toString()
              return "Name: " + name + "\nAddress: " + address + "\nMobile: " + mobile +
                   "\nBusiness: " + business + "\nHome: " + home;
         public String CSV()
              return name + "," + address + "," + mobile + "," + business + "," + home;
    }Now I'm assuming that the problem I am having, where null or 0 is written to the file and screen is caused by the methods that reads a contact, writes them to the file, prints them to the screen. Here are those bits of codes.
    Reads Contact:
    private phoneNumbers ReadContact()
              int x = 0;
              String contact;
              StringTokenizer S;
              while (x < 1 || x > 3)
                   System.out.print("Which type of contact would you like?");
                   System.out.print("\n1)Family\n2)Workers\n3)Friends");
                   x = keyboard.nextInt();
              contact = ReadString("contact name") + "," +
                         ReadString("address") + "," +
                         ReadString("mobile") + "," +
                         ReadString("business") + ",";
              if (x==1)
                   contact+=ReadString("home");
              else if (x==2)
                   contact+=ReadString("email") + "," + ReadString("job title") + "," + ReadString("department");
              else
                   contact+=ReadString("email") + "," + ReadString("home");
              S = new StringTokenizer(contact,",");
              if (x==1)
                   return new phoneFamily(S);
              else if (x==2)
                   return new phoneWorkers(S);
              else
                   return new phoneFriends(S);
    Writes to File
    public void Save() throws IOException
              PrintWriter phoneFile = new PrintWriter(new FileOutputStream(PH_FILE));
              for (int i=0;i<NumOfContacts;i++)
                   String phoneX = phone.CSV();
                   phoneFile.println(phoneX);
              phoneFile.close();
              System.out.println("Contacts have been saved successfully.");
    Prints on Screen
    public void PrintFamily()
              System.out.println("Contacts Stored as FAMILY:");
              System.out.println("");
              //#=7, Name=24, Address=28, Email=24, Mobile=12, Business=12,
              System.out.println(SpaceGen("#",7) + SpaceGen("Name",24) + SpaceGen("Address",28) +
                   SpaceGen("Mobile",12) + SpaceGen("Business",12) + SpaceGen("Home",12));
              //System.out.println(RepChar('=',100));
              for (int i=0;i<NumOfContacts;i++)
                   if (phone[i] instanceof phoneFamily)
                        System.out.print(SpaceGen((new Integer(i+1)).toString(),7));
                        System.out.print(SpaceGen(phone.getName(),24));
                        System.out.print(SpaceGen(phone[i].getAddress(),28));
                        System.out.print(SpaceGen(new Integer(((phoneFamily)phone[i]).getMobile()).toString(),12));
                        System.out.print(SpaceGen(new Integer(((phoneFamily)phone[i]).getBusiness()).toString(),12));
                        System.out.print(SpaceGen(new Integer(((phoneFamily)phone[i]).getHome()).toString(),12));
              //System.out.println(RepChar('=',100));
    For some reason the last thing you enter when adding a contact (example above, home number), gets displayed first (when it should be name) and the rest are null or 0. The file looks something like this (in CSV)
    111222333,null,0,0,0
    The "111222333" is supposed to be the name but like I said last value entered is being put first.
    I've gone over my code several times, with no luck :-(.

    I made a silly mistake in the bit where the details are read. After fixing that everything is running well :-).
    My mistake:
    I had something like:
    while(P.hasMoreTokens()){this.data = P.nextToken();}
    while(P.hasMoreTokens()){this.data2 = P.nextToken();}
    and so on...Obviously had to use "if"s and not "while"s to read the data...
    Thanks for offering a helping hand :-) though!

  • Help! No output!

    Hi there,
    Im using an MAudio Firewire interface and I've got it set to use the aggregate device so I can use my MacBook soundcard as an input and an output.
    I can hear any tracks I create fine but 'system' sounds like previewing loops, metronome, and count ins are not coming through, I guess this is down to the way the aggregate device works.
    My Inputs are set to channel 2, and outputs 5-6.
    Is there any way to fix this, or how do I set this up to work correctly?
    Thanks
    Tom

    Clicks and loops come through their own channel strips, and they're probably set to 1-2. Go into the Mixer, and click the 'All' tab top right. There should be a 'Prelisten' channel strip there for your loops and Sample Editor sounds, and a 'Click' channel strip, which is set to Instrument 256. Change them both to output 5-6 (or whatever output) and you should be all set.

  • My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. It was working fine now I cant get it to output to the Tv. Any ideas?

    My Macbook pro no longer outputs to my vizio led tv. It was working fine now I cant get any picture. It just says no signal. It is not the hdmi or the adapter because it works fine with my other tv. Any ideas on how to resolve this would be greatly appreciated. Please be as specific as possible. Thanks. BTW--I am using the mini dvi to hdmi adapter in case that was unclear.

    Since you say that the same connectors work on your other TV is suggests that the fault is not in the connectors but your Vizio TV.  I would check the settings on the Vizio TV.  Verify that is is set to receive HDMI input.  Perhaps you or some one else has inadvertently changed them.  Pressing the wrong buttons on a remote control device can do that.  (I am assuming no changes were made in SYSTEM PREFERENCES>DISPLAYS)
    Ciao.

  • DVI to Video Adapter: Using S-video vs. RCA output to TV

    I just purchased a DVI to Video Adapter for my MacBook Pro 15". I'd like to display iPhoto slide shows on my TV. Will there be a difference in picture quality on the TV if I output from the Mac (thru the DVI to Video Adapter) using an RCA cable versus an S-video cable?

    S-Video is the better of the two interfaces. Neither is very good when compared with a computer screen, which will have much higher resolution. I doubt you will notice much difference between S-Video and RCA Video but if you have the choice you might as well go S-Video.

  • I am trying to build a DVD from an Everio Camcorder in 16:9. but output is 4:3

    Hi,
    I can't seem to be able to fix this problem. The settings I use in Premiere Elements 9 are as follows when I Open the project: NTSC, Hard Disk Flash Memory Camcorders, Widescreeen 48KHZ. When I bring my scenes in the timeline, I get a warning:"Mismartched Project Setting Preset" . I does not matter if I click Yes or no, they come out 4:3. Also when I create a DVD, I use the setting NTSC Wide Screen Dolby DVD.
    I can figure out what to do to fix that. Also, just spent an hour on the phone with a tech about blurry output and the resolution was to change my files .MOD to .M2V. It could be a pretty long process. With those issues, it is getting to be pretty frustrating.
    Thanks for your help,
    Luc

    Lut,
    Welcome to the forum.
    What are the full specs. of your MOD, and M2v files?If you do not know exactly, you can use G-Spot, or MediaInfo, to gather that info.
    That info might help pinpoint the issue.
    Good luck,
    Hunt

  • Unable to generate XLS output for Quoting Module

    We are using XML Publisher to generate Quote report. We need the output in XLS (Excel) format but it generates only PDF.
    We debugged the following files:
    qotSCopOverview.jsp
    qotSCocPrint.jsp
    qotSCopPrint.jsp
    jtfcrmchrome.jsp
    oracle.apps.aso.print.webui.MainCO.class
    We have set DES_FORMAT to XLS instead of PDF, however it is not generating XLS but the output is PDF only.
    We would like to know the exact JAVA/JSP file which calls XML Publisher engine, so that we could directly change the FORMAT parameter.
    Kindly let us know whether it is possible to generate XLS in this way. Your help will be greatly appreciated.
    Thanking you,
    SURESH KUMAR M R

    Finally we found the solution for this problem.
    1. Open qotSCocPrint.jsp and add below line inside <SELECT id="qotOutFrmt" name="qotOutFrmt"> statement. This line should be added after "for" loop.
    <OPTION value="EXCEL">Excel Format</option>
    We can add as many options the XML Publisher supports.
    2. Decompile oracle.apps.aso.print.webui.MainCO.class (Controller).
    Change the below line
    httpservletresponse.setContentType("application/pdf");
    to
    httpservletresponse.setContentType("application/"+quoteOutputFormat.toLowerCase());
    Take a backup of the original file, compile the java in the same directory.
    3. Decompile oracle.apps.aso.print.server.PrintQuoteAMImpl.class and change this line
    Field field = class2.getDeclaredField("OUTPUT_TYPE_PDF");
    to
    String outputFormat="OUTPUT_TYPE"+as[12].trim();
    Field field = class2.getDeclaredField(outputFormat);
    Bounce Apache and generate the Quote output in desired format.

Maybe you are looking for