Output of a "report_attribute_error_message" in a sorted ALV does not work!

Hi all/SAP,
in my thread editable ALV - how to throw an error message for a specific line & field I figured out, that the output of a "report_attribute_error_message" in the ON_DATA_CHECK event of an editable ALV does not work, if sorting is active for a column.
Thanks to The specified item was not found. for reproducing this problem.
A similar problem exists, using an aggregation of a column. This will lead to a runtime exception.
I've found no fix in the OSS to this problem.
So is there a way to use sorting together with the output of a "report_attribute_error_message"
or if this is a bug, can/will this be fixed in the (near) future?
Thanks,
Andreas

Hi,
Yes, it doesnot work with those (RB,CB) UI elements...Have you checked for any note..I have also tried but no luck..
Regards,
Lekha.

Similar Messages

"Sort Artist" does not work on iPod / How to sort by album artist

I have many albums in my music collection that contain songs by different artists. In iTunes, I have set all these songs to the same "Sort Artist" so that they all appear under the same artist's name (the album artist's name).
However, when I sync my iPod, the "Sort Artist" settings don't carry over. For example, a compilation album with 10 songs by 10 different artists would show up under one single artist in iTunes (per my sort artist settings), but on the iPod the songs show up under 10 different artists. Is there any way to fix this problem? I basically want to sort my music by album artist, instead of just the artist.
The strange part is when I browse my iPod on my computer, the compilation albums are properly sorted under one artist, but it's still wrong when I browse on the iPod itself.

It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
You should also check that the songs have album name info in their ID tags.
See: Some songs don't show under artist on my iPod.
Once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names.
Providing the spelling for the artists is exactly the same of course.

SAP GUI Java 7.10 rev 5: Copy cells content from ALV does not work (OSX)

Hi all,
I'm trying rev 5 for OSX. ALV aesthetics is really great but: copy cells content is not possible anymore.
Nothing happens with command+C.
I cannot copy anymore just a part of the cell content.
Trying all possible key combinations, something is copied with Ctrl+C. When I paste it, the pasted content is something like this:
(0100),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (0000012338),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1)
where "0000012338" is the content I wanted to copy.
Any suggestion?
Thanks,
Lorenzo

Hello Lorenzo,
thanks for the feedback. We are working on it and if all goes well, a solution will be provided with 7.10 rev 6.
Best regards
Rolf-Martin

Sort priority does not work

Hello folks,
I developed several new porta roles and assigned them all to one user. now I would like to change the oder of the tabs in the first level navigation. I changed the setting in the property "sort priority", but the order still stays the same. Does anyone know what might be wrong? Is there another way to change the order of the tabs in first level navigation?
Thank you and regards,
Katharina

Hi,
Defining the Sort Sequence of Navigation Nodes
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/81e0a3ad1d9b488451d2fbac313c27/frameset.htm
Patricio.

EBay sort function does not work under Firefox 9.0 - does work in IE9

The sort by pull down menu in eBay still allows you to pull down and select your sort choice, but none of them work under ff9.0 - they worked fine under ff8.0, and still work in safari 5.1.1 and IE9. I'm using Win7 Pro 64bit.

The same in FF 8.0.1 (Win7 x64 Ult)

Input field in Web Dynpro ALV does not have correct focus

Hello Friends,
Our client's SAP system is recently upgraded with ECC 6.0 SP 18.
After that the focus in the editable field of Web Dynpro ALV does not working properly by down arrow navigation.
The common scenario:
The ALV has more than one rows and one column is editable...
when user is selecting field of first row and making some entries...
after that pressing down arrow it is going to next row and coloring the field like focusing...
but the 'cursor' is not blinking so user can not make entry without clicking by mouse...
this was working Ok before upgrade...
Could you please anyone have a look and propose a suitable solution?
Thanks
Krish

Hello,
The problem was with Javascript....which play an important role in layout of web dynpro ALV...
which resides in MIME repository -> SAP ->PUBLIC - >BC ->NW5 ->JS ->SAPURI_Ie6....
We wrote to SAP for giving us the fix...
after we got a new file from SAP the problem is solved...
also we have to clear server cache through SMICM and client cache...
Thanks.
K.

MiniSAP 6.20: ALV tree not working in background

Good day!
SAP provides a sample ALV tree program, BCALV_TREE_DEMO, which could be submitted in the background.
However, it does not work in MiniSAP 6.20. It's kind of bizarre as it works in our Test system.
Does anyone has any idea what's happening.

Good day!
The ALV tree report is submitted in the background.
By right, it should produce an ALV tree report in the print spool.
However, it does not seem to work. I checked the program and found there is a logic to check whether it's a background job or not. If it is, it would not create the container.
It's bizarre that it does not work in MiniSAP 6.20 but it works in 6.10

Lead Selection does not work after setting filter for ALV.

Hi, Can you please suggest on below scenario :
I have a Node with a sub node in it .
I am using the supply function on Sub Node to retrieve the date based on Parent Node.
There are two ALV's to display parent and item data. The issue is when a filter(user defined filter) is done on Parent table, the supply function does not work. The value is that of the selected row before setting the filter. Even after removing the filter, the item data is stuck and does not change on Lead Selection.
One thing I noticed is if the child table is a table UI, there is no issue. The only problem is when the second table is ALV
Thanks In Advance

Hi Prashanthi,
Your issue can be resolved as below
Create an event handler method 'set_alv_data' for the event 'ON_LEAD_SELECT' of parent alv
Write the below code inside the event handler method
METHOD set_alv_data.
DATA lo_node TYPE REF TO if_wd_context_node.
DATA lv_path TYPE string.
DATA lv_index TYPE string.
lv_index = r_param->index.
CONDENSE lv_index.
CONCATENATE wd_this->wdctx_my_parent_node
lv_index
wd_this->wdctx_my_child_node
INTO lv_path SEPARATED BY '.'.
lo_node = wd_context->path_get_node(
      path                          = lv_path
DATA lo_interface TYPE REF TO iwci_salv_wd_table.
lo_interface = wd_this->wd_cpifc_alv_child( ). "get the ref of alv comp of child
lo_interface->set_data(
    EXPORTING
*    only_if_new_descr =
      r_node_data       = lo_node
ENDMETHOD.
The above code sets the data node of child alv based on lead selection of parent alv data.
Note: Replace 'parent_node', 'child_node' with your nodes & 'alv_child' with your alv component name of child alv.
If you want to control the data of child alv on filter function, you can use the event ON_STD_FUNCTION_AFTE and once you define the filter you get the r_param->id = 'SALV_WD_FILTER_DEFINE' & now you can clear data of child alv.
Hope this helps you.
Regards,
Rama

Sorting based on a parameter does not work

Hi All
I am using BI Publisher Reports with Siebel CRM 8.1.1.6. I have declared a parameter called "inputsort" in the CRM application as well as in the template by using <?param@begin:inputsort?> within the template. I can display the current value of the parameter using <?$inputsort?> without issues.
However, when I try using this parameter for sorting, it doesn work:
The report is created for a list of event attendees. When I do this, sorting works:
<?for-each:EeventsEventCheckAttendee?><?sort:ContactLastName?>
BUT when I do this, sorting does not work:
<?for-each:EeventsEventCheckAttendee?><?sort:$inputsort?>
although the parameter $inputsort does have a value of "ContactLastName".
What could be the reason??

never mind, I found the solution myself. For some reason, the correct way is:
<?for-each:EeventsEventCheckAttendee?><?sort:./*[name(.) = $inputsort]?>
I don't know why, but it works.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

SORT statement is not working!

Hi frdz,
Below SORT statement is not working. Can any one explain me why this is happening.
SORT i_bseg ASCENDING BY belnr bukrs
                    DESCENDING kunnr.
I have table content as below.
BELNR      BUKRS KUNNR
0016000000|CROP |
0016000000|CROP |0008910168
Before and after the sort content order is same.
I want to sort the content like below.
0016000000|CROP |0008910168
0016000000|CROP |
Is there any thing wrong with the sort statement???
i_bseg is defined as TYPE STANDARD TABLE OF
Sort criteria must not change i. e ascending by belnr and bukrs and descending by kunnr.
Thanks,
Vinod.

hi vinod,
this is because on your statement, you are sorting BUKRS in descending order and KUNNR in ASCENDING order.
please take note that the sort order should come after the sorted field. if no order is given, the default which is ASCENDING will be used.
do your sorting like this
SORT i_bseg BY belnr bukrs kunnr DESCENDING.
regards,
Peter

Some sort order functionality not working

I am noticing that after uploading to iCloud, many of my songs and albums no longer sort as specified. Sorting does work where I have specified last name first for artist, but it does not appear to work for other fields. For example, rather than have my many "Best of X" albums all sort under "B", in iTunes I have them sort under "X". (Ditto "Greatest Hits of Y" and so on). In the album lists on my iDevices, they are all back to sorting under "B." Nondefault Song Title sorting also does not survive uploading to iCloud.
This is more of a comment to Apple than to the community; it would be nice to fix this in a future update. Meanwhile, if anyone has any suggestions or workarounds, I'd appreciate hearing them.

I recently noticed the same thing and posted the following under a similar thread:
I recently bought the album “The Bespoke Man’s Narrative” via the iTunes Store on my Mac. In iTunes, it sorts properly under B. In the iOS devices, via iTunes Match, it sorts under T. Updating the Album Sort info in iTunes has no effect. The only way I’ve found to solve it, is to change the album title. However, I have tens of other albums that start with "A" or "The" sort just fine via iTunes Match. I don’t understand why this new purchase is behaving differently.

RH 5.5 output does not work properly in RH 7

I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.

When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3.

TableView : sort = "SERVER" ...does not work for "TIME"

Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
Bindiya

Welcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja

Sorting does not work with ROW_NUMBER () OVER (ORDER BY

CREATE OR REPLACE PROCEDURE SP_SALES (
p_sales_id IN VARCHAR2,
p_rownnum_from IN NUMBER,
p_rownnum_to IN NUMBER,
p_sort_by IN VARCHAR2,
p_query OUT SYS_REFCURSOR,
AS
v_query VARCHAR2 (32000);
v_sort_list VARCHAR2(32000) ;
BEGIN
IF p_spv_sort_by IS NULL THEN
v_sort_list := 'given_name ASC ' ;
ELSE
v_sort_list :=p_spv_sort_by;
END IF ;
DBMS_OUTPUT.PUT_LINE ('v_sort_list '||v_sort_list);
OPEN p_query FOR
SELECT sales_id,
item_id,
order_num,
employee_name
,given_name
dept_id,
manager_name,
ROW_NUM
FROM
(SELECT x.*,
ROW_NUMBER () OVER (ORDER BY v_sort_list ) ROW_NUM
FROM (sales_id,
item_id,
order_num,
employee_name
,given_name
dept_id,
manager_name,
FROM order rvw,
sales pol,
emp ca,
WHERE pol.id = rvw.pr_order_id
AND ca.empid =pol.employee_id
AND status = 'SUP') x )
WHERE ROW_NUM BETWEEN p_rownnum_from AND p_rownnum_to;
-- ORDER by v_sort_list ;
DBMS_OUTPUT.PUT_LINE ('v_sort_list '||v_sort_list);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE ('EX ');
END;
END;
SHOW ERRORS
Sorting does not work. Am I doing something wrong here?
executing procedure using below
declare
x SYS_REFCURSOR;
y number;
BEGIN
SP_SALES('70159_502',1,5, 'GIVEN_NAME'||' ASC' ,:x);
--dbms_output.put_line (:x);
END;

Hello
Depending on how many different columns you can sort on and the data types of them, it may be feasible for you to include the conditional logic in the existing statement without the need for dynamic sql...
DTYLER_APP@pssdev2> var p_spv_sort_by varchar2(100)
DTYLER_APP@pssdev2>
DTYLER_APP@pssdev2> exec :p_spv_sort_by:='some other column'
PL/SQL procedure successfully completed.
P_SPV_SORT_BY
some other column
DTYLER_APP@pssdev2>
DTYLER_APP@pssdev2> WITH source AS
2 (   SELECT 'a' given_name, 'z' other_column from dual UNION ALL
3      SELECT 'b' given_name, 'y' other_column from dual UNION ALL
4      SELECT 'c' given_name, 'x' other_column from dual
5 )
6 SELECT
7      given_name,
8      other_column,
9      ROW_NUMBER ()
10     OVER (
11        ORDER BY
12           CASE
13              WHEN :p_spv_sort_by IS NULL THEN given_name
14              WHEN :p_spv_sort_by = 'some other column' THEN other_column
15           END)
16        ROW_NUM
17 FROM
18      source
19 /
G O    ROW_NUM
c x          1
b y          2
a z          3
3 rows selected.
DTYLER_APP@pssdev2> exec :p_spv_sort_by:=NULL;
PL/SQL procedure successfully completed.
P_SPV_SORT_BY
DTYLER_APP@pssdev2> WITH source AS
2 (   SELECT 'a' given_name, 'z' other_column from dual UNION ALL
3      SELECT 'b' given_name, 'y' other_column from dual UNION ALL
4      SELECT 'c' given_name, 'x' other_column from dual
5 )
6 SELECT
7      given_name,
8      other_column,
9      ROW_NUMBER ()
10     OVER (
11        ORDER BY
12           CASE
13              WHEN :p_spv_sort_by IS NULL THEN given_name
14              WHEN :p_spv_sort_by = 'some other column' THEN other_column
15           END)
16        ROW_NUM
17 FROM
18      source
19 /
G O    ROW_NUM
a z          1
b y          2
c x          3
3 rows selected.
DTYLER_APP@pssdev2>But that would depend on the columns you're sorting on being of the same data type or at least having the ability to convert them to the same data type without loosing the sort order.
DTYLER_APP@pssdev2> WITH source AS
2 (   SELECT 'a' given_name, sysdate - 2 other_column from dual UNION ALL
3      SELECT 'b' given_name, sysdate - 1 other_column from dual UNION ALL
4      SELECT 'c' given_name, sysdate other_column from dual
5 )
6 SELECT
7      given_name,
8      other_column,
9      ROW_NUMBER ()
10     OVER (
11        ORDER BY
12           CASE
13              WHEN :p_spv_sort_by IS NULL THEN given_name
14              WHEN :p_spv_sort_by = 'some other column' THEN other_column
15           END)
16        ROW_NUM
17 FROM
18      source
19 /
            WHEN :p_spv_sort_by = 'some other column' THEN other_column
ERROR at line 14:
ORA-00932: inconsistent datatypes: expected CHAR got DATE
DTYLER_APP@pssdev2> WITH source AS
2 (   SELECT 'a' given_name, sysdate - 2 other_column from dual UNION ALL
3      SELECT 'b' given_name, sysdate - 1 other_column from dual UNION ALL
4      SELECT 'c' given_name, sysdate other_column from dual
5 )
6 SELECT
7      given_name,
8      other_column,
9      ROW_NUMBER ()
10     OVER (
11        ORDER BY
12           CASE
13              WHEN :p_spv_sort_by IS NULL THEN given_name
14              WHEN :p_spv_sort_by = 'some other column' THEN TO_CHAR(other_column,'YYYYMMDDHH24MISS')
15           END)
16        ROW_NUM
17 FROM
18      source
19 /
G OTHER_COLUMN            ROW_NUM
a 12-SEP-2011 15:04:19          1
b 13-SEP-2011 15:04:19          2
c 14-SEP-2011 15:04:19          3
3 rows selected.HTH
David

Output of a "report_attribute_error_message" in a sorted ALV does not work!

Similar Messages

Maybe you are looking for