Output of free -m changed?

I just noticed that the output structure of the free command changed.
It looks like this now
% free -m
total used free shared buff/cache available
Mem: 7850 1351 2386 770 4112 5446
Swap: 4766 0 4766
Some time ago there was this -/+ buffer/cache line.
And the meaning of the columns seems to have changed to. At least the 'used' column had the buffers and cache also summed up into the value.
According to the man page 'used' is now 'total - free - buffers - cache'
I tried to search for the reasons of the changes but can't find information. All I can find is those explanations regarding "help linux ate my ram..." which all have the -/+ buffers line
Does anybody know when and why this was changed?

See https://bbs.archlinux.org/viewtopic.php … 9#p1474359 + the few next posts.
Edit: Also: https://wiki.archlinux.org/index.php?ti … did=343144
Last edited by karol (2014-12-03 16:00:01)

Similar Messages

  • Change flag deactivaion for PO output message type during change mode

    Hello All,
    WE are using automatic message output determination functionality for PO output type. This output type has been configured for creation and change mode under Fine tuning.
    Two output type are configured, for example ZAAA is output type for ALE and output type ZBBB for  archiving.
    Here  archiving functionality is used to transfer attachment from ERP system to SUS supplier portal as a pdf file. This is done via enhancement and the attachment transfer is working fine.
    During creation mode both the output types are determined and successfully processed and as a result attachment is transferred to supplier portal which is absolutely correct. In the attachment all PO line item can be seen which works well.
    Now I change the PO and add a new PO line item, system automatically default both the output type for change mode and upon saving both the output type are successfully processed.
    Now here is the problem in change mode only the added PO line item is sent as an attachment to the supplier portal. Here the requirement is see all the PO line items including the once which were newly added.
    Solution is if we uncheck the change flag for output type ZBBB during change mode then all the PO line item can be seen under the new attachment with new version.
    Please let us know how this functionality can be acheived ... is there an user exit available.
    We have a work around where we are running a background job every 3 mins and based on the last successfully processed message for output type ZAAA we are attaching first output type ZBBBfor archiving the changes and then ZAAA for sending the changes along with attachment to Supplier portal.However this solution is a temporary one , we need a concrete solution for this.
    Please advise.
    Thanks,
    Yatin

    Hello All,
    Thanks for the reply,
    But we cannot modify the existing print program as this print program is being used in different countries also.
    We already know a solution that during change mode if we remove the change flag from output type ZBBB then all the PO line items along with the recent changes can be seen under the attachment under supplier portal.
    The question comes now, how do we automate this processu2026 Is there any standard progam or user exit available.
    Manually, if you add a message type ZBBB in ME22N tranasction for creation mode then all PO line item with recent changes get transferred but we need to automate this process for create and change PO transaction.
    Thanks,
    Yatendra

  • Redermnation of output medium when PO changes are made

    Hello,
    We used to have fax medium for PO output and now it is retired. But when we change old POs, the fax output is getting determined even though output medium is already changed in the output condition records. When we create new POs, the outputs are correctly determined with new medium. Is there any way to determine new output medium when PO is changed?
    Thanks a lot,
    Venu

    Hello Pavan,
    'Fine-Tuned Control: Purchase Order' is already configured for 'New' & 'Change' operations for the output type.
    Thanks,
    Venu

  • Automatic triggering of EDI output on sales order change

    Hi everyone,
    I need to trigger edi output whenever i make changes to sales order and save.
    Can anyone please help...
    Regards,
    Srikar

    Hi,
         Using change pointers you can create an IDOC when ever a specific field in the sales order line item is changed. activate the change pointer for message type ORDERS. Also maintained the entries in BD52
    After this when you change this field at the sales order line item, it inserts entries into change pointer table.
    Use Change Pointers properly so that idoc will trigger automatically.
    <b>Reward points</b>
    Regards

  • It is free to change iphone5 to iphone5s ?

    it is free to change iphone5 to iphone5s ?

    No. Sell the iPhone 5 and use the proceeds towards the
    purchase of the iPhone 5s.

  • Re: Report output header text longuage change

    Hi Dear's,
    Ataually my issue is am unable to change report output header field text to user specific login longuage....
    I.e. if user login to ITALY/GERMANY then report output header text should be displayed on same  Longuage for this can any body give me some idea
    Thanks & Advance,
    srinivas.
    Edited by: SRINIVAS1234 on Jul 23, 2011 11:35 AM

    Hi SRINIVAS1234,
    you can close it as answered and add your personal solution just to let people know how it can be handled. You can also close questions as unanswered but this implies that your problem is still existing.
    Regards
    Clemens

  • PO Output message triggering for change in PO

    Hi,
    We have configured a output message type for PO create . The output message is defiend for condition record doc type, partner as LS and medium A(ALE) and partner name.
    Once PO is created the output is getting triggered and idoc created.If I make any changes in PO agai the same output message type si getting triggered and new idoc created. This shud not happen.
    I checked , the idoc message type ORDERS n its assigned to only ME10 code .
    Cheked all the settings of message type and fine tuned is also not maintaiend.
    Please suggest .

    Hi
    under SPRO > MM > Purchasing > Messages > Output Control > Message Types > Define Message Types for Purchase Order > Fine-Tuned Control: Purchase Order - check whether your output type is added with operation 2 (change)
    Thanks !
    E.Avudaiappan

  • Requirement of no output Trigeer for internal changes in the PO

    Hi All,
    My client requirement is if there are any internal changes in the PO(Like Pur. Group change etc) Out put should not be trigeered.
    Output should be triggered for the changes which should be informed to the vendor like Quantity, price etc.
    Your help on this issue will be highly appreciated.
    Thanks
    Dipak

    Hello,
    Output..you mean there is script/ smart form assigned to your output type....
    if I am right there is some output condition record maintained for that output type...
    There should be some exit which fires at the time of ouput type generation which causes the output...
    Search the exit and you can put SY-SUBRC = 4 for the condition you do not want output
    Thanks
    Krish

  • Buttons set as "free position" change back to default

    In iDVD 6, if you move a button to free position and then save it, when you re-open the project the button position changes back to the default position. I am using the iDVD 6 theme "Reflection Black" and positioned the button in the gray pane at the bottom but it moves back up the pane to the default position no matter how I try to save it. Anyone else having this problem?
    Thanks
    Craig

    The first six slideshows behave themselves and stay where I position them in the area designed for the listing. The remaining six are off to the side right across the moving drop zones, which makes them hard to read.
    I believe all of the menus are defaulted to handle six buttons, while you can add up to twelve on some, maybe this main menu can only "hold" six... I had four on mine.
    How about one button on the main menu that says something like "Slideshows" and when you click on that it takes you to a new menu (the chapter menu) and try to put twelve there.
    G4 DP 1.25 GHz 2GB RAM 4 Drives 770GB   Mac OS X (10.4.6)   2 SuperDrives (SL 8X & DL 16X)

  • Suppressing Output for Purchase Order changes to Vendors

    Hi There,
    Can someone please advice what is the best way to supress an output to a vendor that only relates to changes made to a Purchase Order. We need to limit this suppression to one document type.
    Any help appreciated.
    Many Thanks
    Uzzy

    Normally you can define requirements routines. There you could e.g. check for document type and for the transaction code (SY-TCODE). From the transaction code it should be possible to see if the documnet is created or changed.

  • Column width in output table cannot be changed

    Hi All,
    I have a visual composer model with an input form used to display variables to call a BW query. The query result is displayed in an output table.
    Multiple fields are displayed in the output table.
    On the layout tab of the visual composer model, I have changed the column width of the different output fields.
    After initial execution, the column widths of the different columns correspond to the settings in the layout tab. When I submit the query, example after entering the selection variables in the input screen and pressing submit, all columns widths change to 1 width. All columns now have the same width.
    We installed the latest VC version and hotpackages but this does not help.
    How can I change the column width of an output table?
    Best Regards,
    Filip

    Hi All,
    this column problem I know really good and there is a solution:
    Click on the Output-Port of your Query and then click on Configure. You will see on the right side the property "Dynamic Port". Uncheck that and you will see that the column width is like in the layout tab.
    This is only in Queries. In Function Modules you dont have to do this.
    Best Regards,
    Murat Yurtoglu

  • Output determination in Create/Change.

    HI Gurus,
              How can I diifrentiate whether Sales order is created or changed in output determination, I'm sending data to XI through a custom IDOC. I want to send different data for creation of order and Change of Order how can I handle this.
              Where should I andle this in a driver program.
              Imeediate soultion awaited.Thanks.
    Kind Regards,
    Suresh

    Hello Suresh,
    1. You can track it using sy-tcode and check whether it is VA01 or VA02.
    2. Other way is you can check in the Idoc Message type and your Partner profile configuration.Under the Message control, you can find a check box, which would tell you whether you should trigger your idoc on create or change. If it is unchecked, it would send on create and if checked, it will send during change mode.
    Thanks!
    Suresh Ganti

  • Output medium overwritten while changing PO

    Hi All,
    We are having an issue with PO output. The issue is as below.
    We are having an output which is created with condition type medium print out with sending with own transaction. When we have created the PO the output is triggered properly. That is PO output is updated with sending own transaction and the print out was not triggered.
    The condition record is now changing to special function and send immediately.
    Now when we are changing the PO with invoice complete indicator check the output is overwritten with special function and output is triggering.
    We need to know why the output is overwritten that is we can only see the output which was created initially when the PO was created and now when we are changing the PO the output is triggering with different medium.
    Please help us on this issue
    Thanks in advance.
    Regards,
    Vishal

    Hi.
    Your problem is that after you change the PO with invoice complete indicator, out put type was changed to new one, right?
    I'm not sure if the information will help you, but you can control the fields which is relevant for output change in the following
    customizing.
    SPRO -> Mateiral Management -> Purchasing -> Messages -> Assign output devises to purchasing group.
    If you deactivate the "Field relevant for printing" flag for EKPO-ELIKZ, no output function will be processed even if you change
    the PO with inovice complete indicator.
    I hope this info somehow help you.
    Best regards.
    Keiichiro Abe

  • Will the TOC structure get affected if output file structure is changed?

    I have used FlashHelp to generate output for a project hence the output folder has a structure, now while deploying on the server if I make changes in the output file/folder structure will this affect the "table of contents" or any other feature.
    Also, while deploying o/p files on the server what needs to be done so that the new customized skin(which i made using flash) appears for the help pages of my application as i will be calling the o/p htm files from my application directly using a script.
    I hope the explanation I posted is understandable.

    Hi kiki_04 and welcome to the RH community.
    The output files from your project can not be moved or renamed without breaking links throughout your project. Any changes to the folders or files MUST be performed inside your RoboHelp project. It is best to think of your output as a single file, even though it isn't. In other words, your output can be moved between locations in its entirety
    As for your new skin, this needs to be imported into your RoboHelp project and specified inside your FlashHelp single source layout.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

  • Output type triggered after changes in Sales order

    Hello Gurus,
    Is it possible to manage which field changes (quantity, date) will trigger and create a new output type during Sales order change?
    Image I change the date or the quantity, I would like to create automatically a output type xxx.
    But If I change the plant, I don't want to create a new output type xxx.
    Many thanks.
    Stéphane

    Hi,
    It is very much possible to trigger the output when you change the particular fields in sales order.For this we need to go for ABAP code.
    Ask your ABAPer to do this.
    The code should be written in "Triggering point" in the processing routines.
    We have a similar requirement in our project too.Our requirement is we have maintained some values for customer groups in Header data-->Additional data A tab.
    When we change this field with a particular value,the particular letter is getting triggered as part of the output type as "ZGEN".
    In our case we have developed an ABAP code for this.
    Similar requirement is yours.Ask your ABAPer to develop a code.
    Regards,
    Krishna.

Maybe you are looking for