Output of Intrastat and extrastat

Hello Experts,
For intrastat and extrastat reporting , for italy, when i run MEIS for intrastat i get the following fields in the output.
Our Italian client requires the intrastat to be sorted as per vendor VAT number and commercial code
is this the legal requirement.
If yes, how do i change the display of the fields for the intrastat reporting.
how can i add new fields?
Thanks in advance for your help.pints would be rewarded immediately.
Regards,
Rajeshwari

INTRASTAT and EXTRASTAT are European Union Trade reports.
Cusotmizing is to be done in the foreign trade path of SD and MM.
Depending on the reporting country the requirements are slightly different.
For customizing start reading here: http://help.sap.com/saphelp_46c/helpdata/en/66/72369adc56d11195100060b03c6b76/frameset.htm

Similar Messages

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Output post processors and workflow engines doesn't come up after cloning

ours is a RAC+ASM+PCP -enabled
host1 : DB+ Concurrents
host1 : DB+ Concurrents
host3 : WEB+FORMS+OC4J
host4 : WEB+FORMS+OC4J
We are suffering from an “empty entropy pool” within the JDBC driver. Basically, the driver will attempt to gather a random number from the pool, but if the pool is empty the driver will wait (sometimes indefinitely) for values to come in. In most installations, the default configuration has the pool being “filled” by numbers created through a user interface such as mouse movements. On our servers, we are typically in a “headless” configuration so the pool may not be replenished properly. I’m not sure why we are seeing this new issue, but since the random number generator is related to security, maybe a security enhancement from the OS upgrade has made this more sensitive.
Note that QA4 is “mostly” up and running. The concurrent managers are started on both wpsun144 and wpsun154, but the output post processors and workflow engines are still having issues
The ultimate solution is to add some form of “entropy gathering daemon” to keep the pool filled, but we will need the Unix Admin team’s help and some research to find the best solution. Apparently, in Solaris 10, there is a kernel-level “cryptographic framework” for adding/removing entropy sources.
The workaround is to add a java option to the java command line. For Solaris this seems to work: “-Djava.security.egd=file:///dev/urandom”. This is NOT a reasonable solution since this requires modifying multiple delivered scripts/templates. I made the following changes only on wpsun144.
First, for the context file I had to modify the “s_adjreopts” variable to add the above workaround (per doc 1066312.1).
For adgentns this was fixed by modifying the $AU_TOP/perl/ADX/util/Java.pm file and adding the option. Here are the new lines in the file:
if($javaCmd =~ /jre/) {
return ("-mx256m -Djava.security.egd=file:///dev/urandom", 0);
} else {
return ("-Xmx512M -Djava.security.egd=file:///dev/urandom",0);
After this change, adgentns completed successfully and both the “tnanames.ora” and “listener.ora” files were created in the $TNS_ADMIN location.
For adgendbc, I had to manually modify the template for the script (there are 10 java command lines in the file).
$AD_TOP/admin/template/adgendbc_ux.sh
For txkExecSetJaznCredentials.pl, this file was modified:
$FND_TOP/patch/115/bin/txkSetJaznCredentials.pl
At this point, adcfgclone did finally complete successfully! Also adautocfg is now completing successfully!
Some references:
http://www.usn-it.de/index.php/2009/02/20/oracle-11g-jdbc-driver-hangs-blocked-by-devrandom-entropy-pool-empty/
Oracle E-Business Suite Applications Technology Readme for Release 12.1.3 (R12.ATG_PF.B.delta.3, Patch 8919491) (Doc ID 1066312.1)
Look for a section titled, “Attention: JDBC connections may time out during the upgrade process when random number generation is slow on machines with inadequate entropy.”
Can some one help me on this.

ours is a RAC+ASM+PCP -enabled
host1 : DB+ Concurrents
host1 : DB+ Concurrents
host3 : WEB+FORMS+OC4J
host4 : WEB+FORMS+OC4JPlease post the details of the application release, database version and OS.
We are suffering from an “empty entropy pool” within the JDBC driver. Basically, the driver will attempt to gather a random number from the pool, but if the pool is empty the driver will wait (sometimes indefinitely) for values to come in. In most installations, the default configuration has the pool being “filled” by numbers created through a user interface such as mouse movements. On our servers, we are typically in a “headless” configuration so the pool may not be replenished properly. I’m not sure why we are seeing this new issue, but since the random number generator is related to security, maybe a security enhancement from the OS upgrade has made this more sensitive.
Note that QA4 is “mostly” up and running. The concurrent managers are started on both wpsun144 and wpsun154, but the output post processors and workflow engines are still having issuesWhat is the error from the Workflow and OPP log files?
The ultimate solution is to add some form of “entropy gathering daemon” to keep the pool filled, but we will need the Unix Admin team’s help and some research to find the best solution. Apparently, in Solaris 10, there is a kernel-level “cryptographic framework” for adding/removing entropy sources.
The workaround is to add a java option to the java command line. For Solaris this seems to work: “-Djava.security.egd=file:///dev/urandom”. This is NOT a reasonable solution since this requires modifying multiple delivered scripts/templates. I made the following changes only on wpsun144.
First, for the context file I had to modify the “s_adjreopts” variable to add the above workaround (per doc 1066312.1).
For adgentns this was fixed by modifying the $AU_TOP/perl/ADX/util/Java.pm file and adding the option. Here are the new lines in the file:
if($javaCmd =~ /jre/) {
return ("-mx256m -Djava.security.egd=file:///dev/urandom", 0);
} else {
return ("-Xmx512M -Djava.security.egd=file:///dev/urandom",0);
After this change, adgentns completed successfully and both the “tnanames.ora” and “listener.ora” files were created in the $TNS_ADMIN location.If you are on R12, please see these docs (search for "Djava.security.egd").
Oracle E-Business Suite Applications Technology Readme for Release 12.1.3 (R12.ATG_PF.B.delta.3, Patch 8919491) [ID 1066312.1]
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
For adgendbc, I had to manually modify the template for the script (there are 10 java command lines in the file).
$AD_TOP/admin/template/adgendbc_ux.sh
For txkExecSetJaznCredentials.pl, this file was modified:
$FND_TOP/patch/115/bin/txkSetJaznCredentials.pl
Can some one help me on this.Are you trying to avoid manual changes? If yes, please make sure you have all the patches mentioned in the docs referenced above applied and you have all the necessary configuration/setup.
Thanks,
Hussein

Simultaneous audio from outputs 1-2 and outputs 3-4?

Hi guys,
How do I get simultaneous audio from outputs 1-2 and outputs 3-4? I'm running Logicpro 7.1 through an M-Audio FW 410 hardware interface.
I'm trying to set things up so I can monitor through my mixing board to eleminate the weird echo sound you get in your headphones when recording.
I thought I could do it in logic by creating an ouput 1-2 and output 3-4 channel strip where ouput 3-4 will have the "i/o" plugin and in the plugin settings, Out would be set to 3-4 and input set to 1-2, this way sound will always come out of output 1-2 which will go to my speakers and output 3-4 to my mixing board. Please help!

I'm trying to set things up so I can monitor through my mixing board to eleminate the weird echo sound you get in your headphones when recording.
The 'weird echo sound' is because you are hearing Logic's software monitoring alongside direct monitoring of the inputs (either via the interface, or your mixer, depending where the headphones are plugged in.)
You can avoid this by setting the monitoring level on the record-enabled track to zero. (recording tracks have two level settings. Normal playback and record input monitoring. See page 282 in the Logic Pro reference manual.) It will not affect your record levels, or your input metering.

Hi all, i am missing the output to web and pdf in Bridge , any option to get it in the bridge from adobe creative cloud

Hi all, i am missing the output to web and pdf in Bridge , any option to get it in the bridge from adobe creative cloud
@bridge

Have a look at Install Adobe Output Module

Restrict Output for Fax and Print in Sales Order

Hi,
I am having a sales order output with two output types - Fax and Print. I need to restrict one page "Terms & Conditions" to be printed only once when I select the output type as FAX. But if the output type is PRINT, I have to print the page "Terms & Conditions" after every page i.e in even numbers since it is getting printed on both sides of the paper.
Can anyone help me on this.
Thanks in Advance.

Hi,
For pages->Conditions->write condition for ,when it should trigger.
output type eq Printer.
Regards,
Shiva Kumar

Alv output in html and in excel format

hi all,
how can i get the alv output in excel sheet and also in html.
not dowloading but directly when i execute the report i need to get output in excel and in html format.
regards,
geetha

hii
Use the Local file button on the toolbar of ALV.By clicking on this you will be able to export data in to excel sheet.
also refer to following link
Download ALV into excel file
If your requirement is to download data programetically then you can use
GUI_DOWNLOAD Function Module..
regards
twinkal
Edited by: twinkal patel on Jul 24, 2008 9:23 AM

Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari

IPad2: After upgrad to iOS 8, video output lost left and right side

I have a cable for my iPad2, once plugged in the bottom slot, it outputs video to TV Component port and audio to my amplifier. It's been working for years. After iOS 8 upgrade, I notice the video output lost left and right side. It's like
[before iOS 8] Apple iPad is a wonderful product for me.
[after upgrade] iPad is a wonderful product
The "Apple" on the left, and "for me." on the right of screen is gone in output.

Change your Aspect Ratio on your TV to 16:9

How to archive smartform output as PDF and store in External server

Hi,
I have requirement on archiving smartform output.
1.need to archive smartform output as PDF and need to store the PDF in FileNet server.
2.These iPDF need to link to SAP transaction FEBA_LOCKBOX at service for object level.
I know that it can possible through SAP ArchiveLink feature , also aware that i have to enable Archive and Archive print button in the smartform output.
If any body can give me some solutions it will be a great help.
Regards,
Ratheesh BS

Hi,
DATA: T_SSFCTRLOP TYPE SSFCTRLOP.   "FOR SMART FORMS
DATA: T_SSFCRESCL TYPE SSFCRESCL.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      FORMNAME                 = 'Smart Form Name'
   IMPORTING
     FM_NAME                  = FM_NAME
   EXCEPTIONS
     NO_FORM                  = 1
     NO_FUNCTION_MODULE       = 2
     OTHERS                   = 3
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
T_SSFCTRLOP-NO_DIALOG = 'X'.
T_SSFCTRLOP-GETOTF = 'X'.
T_SSFCTRLOP-LANGU = 'E'.
CALL FUNCTION FM_NAME
    EXPORTING
      CONTROL_PARAMETERS = T_SSFCTRLOP
    IMPORTING
      JOB_OUTPUT_INFO    = T_SSFCRESCL
    TABLES
      G_T_PERNR          = G_T_PERNR. "(Internal Table).
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HR_EFI_SHOW_PDF_FORM'
    EXPORTING
      TOP_EDGE = 10
      LEFT_EDGE = 15
    TABLES
      OTF_TABLE = T_SSFCRESCL-OTFDATA.

Simultaneous audio output from Ipad and bluetooth ?

Is it possible to have simultaneous audio output from IPAD and a bluetooth speaker? At present I can only get audio from the Bluetooth Speaker and nothing from the IPAD's audio out! My purpose is that my Mom will hold the IPAD to listen to her Audiobooks but my Dad who sits across the room and is hard of hearing needs a speaker close to him, so I need simultaneous audio from both devices.
JW

Use this: http://smile.amazon.com/KOKKIA-A10m-MULTI-STREAM-Transmitter-concurrently/dp/B00 69G1SIC/ref=smi_www_rco2_go_smi_1968491462?_encoding=UTF8&*Version*=1&*entries*= 0&pf_rd_p=1968491462&pf_rd_s=smile-campaign&pf_rd_t=201&pf_rd_i=B0069G1SIC&pf_rd _m=ATVPDKIKX0DER&pf_rd_r=1N57Q0YT9QW7Y1K596YD and use two Bluetooth speakers for them. The speaker output on the iPad is pretty limited and your mother will probably have a hard time hearing it. Get a BT speaker for both and the above device and they both can listen from whatever location they want (within 40 feet) and get better sound.

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Find the SAP Script name for the Output type RD00 and Appli V3

Hi Gurus,
My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification.
Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ?
Regards
paul

Hi,
The script Name is LB_BIL_INVOICE
You can find byNACE>V3>Output Types>RD00-->Processing Routines
In thje output type Press Change button and select New entries.
Regards
Sandipan
Edited by: Sandipan Ghosh on Mar 31, 2008 12:06 PM

Functional specs for output of ship and debit contract

Hi All,
Does anyone have a doc on the functional specs for output of ship and debit contract? If so pls email me at [email protected]
With Thanks & Warm Regards
SK

What is the exact info which you are looking for regarding ship and debit contract?. What do you mean by functional specs..?.

PO output with XML and PDF format

Hi All,
I need PO output with XML and PDF format. when I give print it shld go to vendor with xml and pdf format through mail. please kindly guide me on this .
Thanks in advance
JK

hi,
try this code to get in pdf form
REPORT zsuresh_test.
Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
Internal tables declaration
Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = w_cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = w_outoptions
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
reward points if useful,
siri

Output of Intrastat and extrastat

Similar Messages

Maybe you are looking for