Output of two variables

Who knows how output in the separate window two variables with the different length
for example
a b
a b
a b
a b
a
a
a
where a has length=7, and b=4
Thank you in advance

what?

Similar Messages

Way to plot two variables on a chart by selecting the two variables on the front panel?

Hello,
I have created a VI to control a tensile tester which controls/outputs the following variables: time, load components in 6 directions, tensile displacements, displacements measured by a capacitance sensor.
Is there a way such that there would be only one plot on the Front Panel, and there will be buttons on the front where I can select the variable for the x and y axis when the program is running?
I only know how to make a plot using Chart Buffer using only two fixed variables. The only way I think of doing this is making a plot for every single permutation of variables, then put those plots in Tab Control...is there an easier way?
Thanks!

I have done this a lot in applications to save realestate and simplify the UI. Basically, I create an enum (or typedef) describing the x or y-axis values I would like to display on a graph. Using an event structure, you can watch for a change in these selector and re-plot your graph. You store your data somewhere (possibly in an array) and simply index into that array based on what you want to show. I attached a short example to illustrate this implemenation. Hope this helps. (LV2009)
-cb
Attachments:
Select from multiple curves and axis to plot.vi ‏19 KB

How to set report output to session variable

Hi,
Is there any way to set report output to session variable . If my report returns 1 row and 1 column.
I have a dashboard prompt where i am selecting Name , but i want to find out the ID of that name .
that ID i want to pass to a column Fx , to achieve this i created a intermediate report and i got the ID. Now my problem is how do i set this ID in session variable .
Please help if anyone knows...

Did you read this:
how to set session / presentation variable in repository variable
Dashboard prompt on Month Name but report filter on month ID:
Re: Dashboard prompt on Month Name but report filter on month ID needed
If you have dashboard prompt (name) then you may have only one report that is filtered by name but show id or not show id but use id in the function. Or two reports like in the solution in the second link above and the second report has id in the function and filter by id from the first report. You don't need to set this ID in session variable for this example.
Please close your previous threads if they are answered.
Regards
Goran
http://108obiee.blogspot.com

Aggregating output of two BS in OSB Split join

Hi,
i am using split join to invoke two BS and after the each invoke activity in parallel branch i have placed assign activity and assigning output variable of in voke to reply activity output variable response.parameter . However in o/p i am getting response of only one BS. can any one help on how to aggregating output of two BS in OSB Split join . my output is coming like this
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Body>
<ns2:NewOperationResponse xmlns:ns2="http://www.example.org/SjWsdl/">output</ns2:NewOperationResponse> -------->this is o/p of one BS. But i want to display O/p of two BS
</soap-env:Body>
</soap-env:Envelope>
thanks in advance..
Edited by: 11207106008 on Jun 26, 2012 10:11 PM
Edited by: 11207106008 on Jun 26, 2012 10:12 PM
Edited by: 11207106008 on Jun 26, 2012 10:13 PM

Suppose you saves the response of each BS in variables: $response1 and $response2
then you need to configure the replace action after the parallel branch like this:
Replace node content of . in variable <variable name of reply variable> with <Expression>
Where you can provide in <Expression> a simple XQuery expression to combine the two variable contents. (Choose a root node of your choice, I have used AggregatedResponse)
<AggregatedResponse>
{$response1, $response2}
</AggregatedResponse>

Combine output of two business services

Hi,
I need a solution for the following problem.
I have two dataservices(DS1 and DS2) whose return type is C.
Now I want to combine these data services output at service bus level.
The return type for final output should also be C, basically a kind of union transformation.
For dataservice (DS1 and DS2), I have craeted two buisness services (BS1 and BS2)
I wnat to do the union at proxy service.
But I donot know how to call two business services at same time and how to combine their output.
Should I use service callout???
Please help me, I am pretty new to service bus

You can use Service callout to invoke DS1 and DS2 and assign the responses to different variables. After the two callouts are made define an xquery transformation that takes these two variables as input and returns desired output. In ALSB pipeline use output of this transformation to replace body.

Regarding swapping of two variables

i have two variables of type varchar2. i need to swap them using a procedure which takes two variables as arguments and returns them swapped.
can anyone give me the complete pl-sql procedure for the same.
i am new to pl sql.
thanks.
Edited by: user12773921 on Mar 9, 2010 8:48 AM
Edited by: user12773921 on Mar 9, 2010 8:50 AM

Hi,
You can't call a procedure from a SQL statement.
If you want to swap columns in a query, just use aliases:
SELECT       ename          AS hiredate
,       hiredate        AS ename
FROM       scott.emp
ORDER BY ename
;Output:
HIREDATE   ENAME
SMITH      17-Dec-1980
ALLEN      20-Feb-1981
WARD       22-Feb-1981
JONES      02-Apr-1981
BLAKE      01-May-1981
CLARK      09-Jun-1981
TURNER     08-Sep-1981
MARTIN     28-Sep-1981
KING       17-Nov-1981
JAMES      03-Dec-1981
FORD       03-Dec-1981
MILLER     23-Jan-1982
SCOTT      19-Apr-1987
ADAMS      23-May-1987Notice that the alias is used in the ORDER BY clause.

How to COmpare two variable in BPEL

Hi ,
I have two compare two variable ( EIN field ) one from input variable of a BPEL process and other one the output variable of a invoke .
My requiremet is like this :
If the the value of both EIN field is same then I have to assign Name field of Invoke output parameter to Output variable of BPEL process .
If the value doesn't match then i have to assign ' No Data Exist ' expression to Output variable of BPEL process .
How can i do this .
Please help me regarding this as early as possible .

You can do this in a switch statement. Perform a comparision to check if the values are the same, if case is not important (because users will enter anything) wrap the code in a case expression, e.g. upper(user_date) = upper(file_data)
What version of SOA Suite and JDev are you using. Make sure that these versions are in sync.
cheers
James

Assigning a value to two variables

I need to assign the same value to two variables is there a way to do this like in some other languages.
e.g. I have the following currently:
l_test := 'valval'
l_counter := 'valval'
I want to condense this down into something simpler such as:
l_test := l_counter := 'valval'
Is anything like this possible?
Many thanks in advance.

Because I need to build up two queries gradually since they depend on situations at runtime i.e. I cannot just write the query in one statement and run it since it is built up gradually based on the application.
One is to obtain the results of the query and the other is purely to count up the results. The reason I am doing this is because it is more efficient than running two CURSORs which is the current situation.
This will result in a cursor containg the results to loop through and a value which equals the number of results. Where the variables will have the same added to them is with the WHERE clause, since the conditions don't change just how they are stored changes. i.e. One is CURSOR to loop through and one is a straight value.

Calculation of interest amount with two variables formula

Hello everyone,
Iu2019m facing a problem with the way that TRM calculate the interest amount for money market transaction when I have a formula with two variable, e.g. reference interest rate u201CXu201D multiplied by 0,98.
Some contracts explicitly say that to obtain the u201Cdaily interest rateu201D of the contract firstly the u201Cdaily interest rateu201D of the reference interest rate must be calculated and then apply a index or factor (e.g. 0,98). In the other hand some contracts says that it should be done the other way around. Iu2019ve noticed that TRM calculate the interest amount using the first way.
Is there any way to set which the way the interest amount should be calculates?
Has anyone faced similar problem?
The examples below illustrate the difference in the two ways to calculate interest amount.
Considering the following money market transaction:
1. Borrowing structure:
1.1. amount: USD 1.000.000,00
1.2. flow type: 1105 u201CBorrowing/Increaseu201D
2. Term (only one day to simplify the example)
2.1. Start date: 30.01.2011
2.2. End data: 31.01.2011
3. Interest structure:
3.1. Interest form: VARIABLE ( formula = Z1 * 0,98), where u201CZ1u201D is a reference interest rate
3.2. condition type: 1200 u201CNominal interestu201D
3.3. Interest calculation method: ActW/252
Considering that Z1u2019s annual interest rate in 30.01.2011 is 11,66%, TRM would perform the following calculation:
1. Contract annual interest rate (%) = Z1*0,98 = 11,66 *0,98 = 11,42680000%
2. Convert from u201CContract annual interest rate (%)u201D to number = 1,11426800
3. u201CContract daily interest rateu201D = 1,11426800 ^(1/252) = 1,00042945
4. Convert from u201Cnumberu201D to Day interest rate (%) = 0,04294481%
5. Interest amount = u201CContract daily interest rateu201D * Borrowed amount = 0,04294481% * 10.000.000,00 = 4.294,48
In the other hand, some contracts say that the interest rate should be calculated in the following way:
1. Annual interest rate (%) = 11,66 = 11,66000000%
2. Convert from u201CAnnual interest rate (%)u201D to number = 1,11660000
3. Daily interest rate = 1,11660000 ^(1/252) = 1,00043775
4. Convert from u201Cnumberu201D to Daily interest rate (%) = 0,04377480%
5. Calculate u201CContract daily interest rateu201D = 0,04377480% * 0,98 = 0,04289930%
5. Interest amount = u201CContract daily interest rate (%)u201D * Borrowed amount = 0,04289930% * 10.000.000,00 = 4.289,93
With this simple scenario we end up with a USD 4,55 difference for a single day, but for big contracts of hundred millions and for several years the difference is quite huge.
Thanks in advance ..
Giuliano

Hi,
with Product Category 550 you can have both scenarios:
for the 1st case you can use a formular (e.g. EONIA * 0,98)
=> interest for 1 day: 462,70 EUR
for the 2nd case you can use the field Variable Interest Rate (EONIA) + field Payment Rate (98)
=> interest for 1 day: 453,44 EUR
Is this, what you are looking for?
Regards,
Lorenz

Outputting an int variable in an applet?

Hey all i will keep this short, i am modifying an applet for a university project and am trying to output an integer variable to screen, i tried using g.drawString but i apparently can only use it to output "text in the double quotes" and if i try putting the variable in without the double quotes it throws an error, i was just wondering how would you output a int variable to screen in an applet, thanks

To convert an int to a String, use:
String.valueOf(int)

How to make a Java program that recognises a function of two variables...

How to make a Java program that recognises a function of two variables to assign values to that?
First I will give an example and then do the question.
Ex1.
We have any function, eg.y = x ^ 2 + 1 (read 'y' equals 'x' high to the square), a function of the second degree.
To build the graph of this function attach values to 'x' to find the values of 'y'
And thus mount the pair ordered (x, y) which represents a point on the Cartesian plane.
Assigning values to 'x' 'we can build up a table that gives us the pairs ordered:
We can use any numbers, but arfer interval [-3.3]
X | y = x ^ 2 + 1
-3 | Y = (-3) ^ 2 +1 = 10
-2 | Y = (-2) ^ 2 +1 = 5
-1 | Y = (-1) ^ 2 +1 = 2
0 | y = (0) ^ 2 +1 = 1
1 | y = (1) ^ 2 +1 = 2
2 | y = (2) ^ 2 +1 = 5
3 | y = (3) ^ 2 +1 = 10
We then ordered the pairs:
(-3.10), (-2.5); (-1.2), (0,1), (1,2), (2,5), (3,10)
Tabem that can be represented by a table:
X | y
-3 | Y = 10
-2 | Y = 5
-1 | Y = 2
0 | y = 1
1 | y = 2
2 | y = 5
3 | y = 10
Now I begin to explain my doubts.
See this program:
Ex2
* To change this template, choose Tools | Templates
* And open the template in the editor.
Encontrando_o_valor_de_y package;
* @ Author des Soldat Gottes
Import javax.swing.JOptionPane;
Public class (Main
* @ Param args the command line arguments
Public static void main (String [] args) (
Int x, y;
String x1;
X1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',"); / / receives a value for the function y = x + 1
X = Integer.parseInt (x1); / / tranforma String in int
Y = x + 1; / / receives the value of 'x' and calculates' y '
JOptionPane.showMessageDialog (null, "The value of 'y' is: \ t \ t" + y);
/ / Displays the value of 'y'
System.exit (0);
We see that the program receives above a value for 'x' and replaces the function contained in the program, y = x + 1, and so is the value of the variable 'y'.
In: x1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',");
The entry is a number and that number is assigned aa ja existing function in the (y = x + 1).
The question is: would it be possible to come to a function?
Ex: the program ask: DIGITE THE FUNCTION?
The USUARIO DIGITARIA A FUNCTION ANY, TYPE: y = x ^ 2 +1
The program would recognize the function and give numerical values to that function as Ex1, at the beginning of this text.
And then to find the values of the x and y launch a table.
It would be possible that?
By invez of entering with a number so that the program sustitua a function ja existing as Ex2, seen above, entering with a function quaquer (type: y = x ^ 2 +1) for the program atribuisse values to that function and then create a table of values as Ex1.
I hope it has been easier to understand my doubts now.
Thank you for your attention!
God bless!

rafaelmenezes wrote:
Thanks for the explanation, could understand what fly said.
But as it applied to a program?
How to create a program that recognizes that the entry coefficients?Are you asking about how to parse out the coefficients from the string "3x^4 + 4x^3 - 8x^2 + 5x^1 + 2x^0"? If you define the format to strictly follow that example, this should get you started:
Strip out the spaces
Split the String on "x^"
That should give you [3, 4+4, 3-8, 2+5, 1+2, 0]
Split each resulting String on "+ | -", preserving the operator as a token so you can apply the correct sign to the coeff.
That should leave you with [3, 4, +, 4, 3, -, 8, 2, +, 5, 1, +, 2, 0]. Every other number is a coeff, the rest are the degrees.
You can strip out the +, since those coeffs are already positive, and strip out the - after negating the following number. This is all assuming that you have to write this yourself. There is no doubt already a library or 5 out there that does this for you.

Hetis 865GV video output to two monitors

Does anyone know how to set the Hetis 865GV to output simultaneously to the VGA port and to either DVI or S-Video to display the same output on two monitors?

well i dont have an 865 , but that is handled by my video card.
try reading up in the features of that, using a short alt f something key to turn on 2nd display. may have to set it up under video card propertes, an click a check box under tv.

Execute SQL task for Email ToLine using COALESCE and two variables

Hello...
I am converting an old DTS package to SSIS. The old package consist of mostly ActiveX Script so I am breaking it down into steps. Basically... I am retreving a set of records that need to be sent via email to multiple people. In my package to create
my ToLine for the Send Mail Task I am using several steps. Frist I am using:
SELECT CASE
          WHEN EXISTS ( SELECT        users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?) ) THEN
             1
          ELSE
             0
       END AS ValidEventID
I use this to see if there is any records to create my email string. This works fine. After this I have a Script Task that splits my pipe in two. When no records exist (User::ValidEventID == 0) I am loging that event to a log. When records do exist
I am using another Execute SQL task to create the actual ToLine:
Declare @combinedString VARCHAR(max)
SELECT      @combinedString = COALESCE(@combinedString + ', ', '') + Users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?)
SELECT convert(varchar(4000),@combinedString) as StringValue
I have my resultSet set to Single Row. I have two variables coming if for the Audit_Id and ErrorCode_Id. My Result Set is set to a Variable: User::EmailAddressString.
Next it goes through a foreach loop to map to the ToLine email variable that I created named User:User_EmailAddress.
Then I am using that in my Send Email Task.
It all works fine when I hard code my variables into the COALESCE statement but as soon as I replace that with the ? that SSIS requires for variables I am getting the following error:
[Execute SQL Task] Error: Executing the query "Declare @combinedString VARCHAR(max)
SELECT      ..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
I have tried changing my resultset property, I have checked my paramenters and my connection. I don't understand why it works fine when I have my varaiables hard coded but not when I change them to the ?.
Thanks in advance for you help in this matter.
Reach for the unknown!

Katherine... that did not work.
What I ended up doing was taking out the forloop all together. In my Execute SQL Task I changed the result set from single row to XML. I took out the COALESCE statement and just went for something more basic:
select users.User_EmailAddress + ';' as User_EmailAddress from Errors inner join users on users.user_id = Errors.MonitorAuditor_User_Id WHERE ([Audit_Id] = ? AND [ErrorCode_Id] = ?)
Currently I am just logging the string to a text file so I can see the results. In my text file the string is surrounded by <ROOT></ROOT>. So I will next I will work on triming that off the string and then populate my Send Mail Task.
This is how I trimed off the <ROOT></ROOT>:
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
"<ROOT>",
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
";</ROOT>",
Thanks again everyone for the help!
Reach for the unknown!

Smartform output in two different printers

Hi Experts,
I want to take the Smartform output in two different printers. printers has been added in the table <b>pkhd</b> .
please anyone suggest how to pass these two in the smartform function module?
Thanks in Advance
Kavya Deva

Hi Kavya,
You can execute the Smart form Function Module. It will then pop-up a dialog box asking for an output device. There you can specify the Output device type and go for Print or Print Preview as necessary.
Manoj

Passing two variables in the body of the URL using the go to detail page SB in ASP

Hi all,
Would appreciate your assistance with the following, I'm
trying to set up a go to detail page sb that passes two variable in
the body of the URL rather than the standard one.
The code i've tried is -
<td><A HREF="gggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>&"PCL1ID=" +
othermenutwo.Fields.Item("PCL2PC1ID").Value
%><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></A></td>
Where the PCL1ID and the PCL2ID are the variables
The normal code generated by the go to detail page sb with
one variable is -
<td><a href="ggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>"><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></a></td>
Unfortunatley my code tweaking isn't working as the second
variable isn't being sent, any help would be gratefully appreciated
Thanks

Instead of using DW's 'go to detail page' option, simply set
up the link the manual way in DW using the Link browser. Select the
file you want to link to and then use the parameters button at the
bottom of the 'Select File' dialogue to set the parameters to be
passed with the link. You can then manually set the name of the
parameter to be passed and then select its value from a recordset.
The key thing is that you can set as many parameters as you like,
so you can set both the parameters you want.
On the detail page you then filter by the parameter name you
chose (or both).
Personally I always code links this way rather than using the
go to detail page option as you get much better control of what is
going on.

Output of two variables

Similar Messages

Maybe you are looking for