Output On change

Hiya
Firstly - I want to know if i can activate an output on Change and not on Create.
Secondly - I want the output to be created at a specific time of the date and it should have the data updated till then.
For example i create an order before 5'oclock. Save it during the day and before end of day change it; before 7'oclock. and want the output as per the current status of the document.
Any suggestion ???
Thanks

It can be done through requiments...

Similar Messages

Standard SAP HR report to give output on change in fields values

Hi
Is there any starndard report in sap hr which will give output on changes on the infotype fileds for given two dates.

Hi,
Use FM HR_INFOTYPE_LOG_GET_DETAIL .
Regards,
Srini.

Output for changes versions in SRM

Hello,
We are currently trying to control when our SRM (server 550)system is to send output to our vendors, but the output is only to be sent if specific elements in an order is changed.
To do this we are using the table BBPD_COMP_FIELDS.
This works very well, there is just one problem that we cant seem to understand why.
If you created an order, then change the order with something that was not suppost to send output (because it is set in the table above) it sends the output. If you then change the same again it will not send out put (which is correct).
So what it does is for changes that shouldent send output when changed:
order --> output (correct)
change1 --> output (Wrong)
change2 --> no output (correct)
it should of been:
order --> output
change1 --> no output
change2 --> no output
Question is why and how do we get it to stop doing this?
Hope someone can help us.
Best Regards
Lisa M Simonsen

Hi
Use the PO version control BADi to change the version for the PO on identified field changes. In SPRO, out put conditions, trigger the change output when there is a change version of the document. This should work.
BBPD_COMP_FIELDS (with SM30). There is something mentioned about which fields to compare for PO output, you have to scroll some way down to get there.
Re: Changed PO output
Also, Please go through the following pointers, which might help you out.
Re: PO output fields
Re: Control PO output to vendor
Re: No Output Condition on Purchase Orders
Version Details
Do let me know.
Regards
- Atul

Names of column appearing in alv output after changing layout in alvgrid?

Hi all
I have a requirement where I am displaying 20 fields using alv grid(cl_gui_alv_grid). Now each time when I run I can change layout and can display any number of columns in output using change layout option.
My requirement is i need to know the column names of the fields which are displayed upon changing layout in output. Using this column names I have to write some logic in code. Each time number of column may vary as per the user selection. Is there any method or way to get the names of columns selected in output display?
Please help me in this regard.

Hi,
During run time you will get the ALV layout info using this function module.
REUSE_ALV_GRID_LAYOUT_INFO_GET
Regards,
Anversha

Spool Output Device changes after printing the 1st Copy

Hi ,
While printing the spools from the batch jobs for the 1st time it prints properly . In SP01 I find that the Output Device changes from the defined device to local printer after the 1st print and the spool is in waiting status.
Can any one kindly tell me what might be the issue.
Thanks.

Found the following article from Microsoft in which they recognize this problem :
http://support.microsoft.com/kb/952266
But NO fix !!!??? Thanks MS !!

Issue with "timing" in Message output of Change PO

Dear Experts,
For change PO, We are facing issue with the Timing in message output of PO.
i.e, For example when we create a PO - the timing in message output is "1"
after executing ME9F, the message turns GREEN - and still the timing is 1.
Change PO : NOW WHEN WE CHANGE A PO, a new entry of Message output appears in "YELLOW"
Here is the issue - Now when we manually change the timing from "3" to "4", initially it appear's "4",
but if u refer the below screenshot - once we save the application i turns back to 3.
any idea - why this is happening.
Thanks in advance.
Regards,
Rohit

Hi,
1st make sure which Dispatch time you want for your PO layout and restrict changing dispatch time manually in PO.
Now use t.code:NACE, with application EF for your PO message type, Keep Dispatch time 4 in ‘Default values’ TAB and select check of “CannotBeChanged” in Basis Data TAB and save.
Maintain message condition record in t.code:MN04 with PO message type and keep Dispatch time 4.
Now create PO , try to change Dispatch time and see how system behave!
Regards,
Biju K

Not able to view the XML Output, after Output format changed to XML

Hello Everybody...
After running the concurrent program having output type of XML. Output is not getting generated.
But getting generated when output type is changed to Text.
Please find the below log file info. :
BioReliance Receivables: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXBRAXINVNEW module: XXBio Print Selected Invoices New
Current system time is 28-MAY-2009 05:31:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='9859529'
p_trx_number_high='9859529'
p_installment_number='1'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='0'
p_debug_flag='N'
p_message_level='10'
p_userid='9092'
XML_REPORTS_XENVIRONMENT is :
/oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 14380
REP-3000: Internal error starting Oracle Toolkit.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 102
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 9859529
MSG-00010: 05:31 1 Transaction: 9859529
Report Builder: Release 6.0.8.25.0 - Production on Thu May 28 05:31:28 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 14767798 on node RCKBLADE05 at 28-MAY-2009 05:31:36.
Post-processing of request 14767798 failed at 28-MAY-2009 05:31:36 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
Finished executing request completion options.
Concurrent request completed
Current system time is 28-MAY-2009 05:31:36
Please do the needful in resolving the issue.
Thans in Advance.
Abdul.

Hello Hussein,
Thanks.
Before I could ask the DBA to chage the DIPLAY parameter, I could see error in FNDOPP*.txt file, as some issue with tag "split-by-page-break".
Accordingly I removed the tag from the template file ( RFT File). Now the request is getting Completed with Normal status. And generating the PDF output.
I found a hit in the metalink for this issue, which suggests a PATCH 4206181 (XDO.5.5) to get this functionality.
Accordingly the PATCH is applied.
Now when trying to query the template name from the XML Publisher Administrator Responsiblity, page is getting errored with the below message.
====================================================================
oracle.apps.fnd.framework.OAException: Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = TemplateFilesForViewVO2; APPLICATION_MODULE = oracle.apps.xdo.oa.template.server.TemplatesAM;
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1960)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
====================================================================
Please do the needful in resolving the issue.
Thanks,
Abdul.

Sound output: keeps changing from internal speakers to Apple TV

My iMac keeps changing the soudn output from internal speakers to Apple TV. Why. This makes it a pain. Eveytime I use the iMAc, I have to go into preferences>sound>output and switch to internal speakers. Any ideas how to stop this form happeneing?
Thanks!

If you use LogMeIn, it is their sound driver. I'm having identical problem and it started after using LogMeIn.
See this page;
http://community.logmein.com/t5/Free/Mac-restore-defaul-sound-output-device-on-d isconnect/m-p/88522/highlight/false#M8093

How to change a SAP script output without changing Print Program

Hi,
I want to change output of standard PO report printing object. I have to change the ZSAPSCRIPT but I have to keep the print program intact. please give me ideas.

Hi for that you have to do following.
1. Create a ZPROGRAM
2. Write a Perform in your SAP Script.
3. Write Form inside it your ZPROGRAM.
Hope this will help you.
<i><b>Reward points for helpful ans.</b></i>

Output Preview Changes Colors

In our softproofing setup, we have our press profile set up as the default CMYK profile in Acrobat 9. However, when we open the Output Preview window with the same profile set under Simulation Profile, the appearance of the color changes (some colors more so than others). I'm probably missing something simple, but I would think that the appearance should stay the same unless you change the Simulation Profile to a different profile.
I look forward to reading about what a doofus I am...

Please explain in more detail. A screen shot might help. Also version of Acrobat.

Send output for Changed PO

HI all,
   I am unable to re-send purchase order after making changes.
   After making changes to a purchase order (ME22N) based on either a custom field = 'X' or po total value > $100,000, i like to re-send the output via email to the vendor. In Nace, i saw this program FM06AEND and routine Change-Flag. What is this FM06AEND for ?    Also, do i need to do customization so i can re-send the output ? How does it detect my changes ?
     When i put breakpoint in FM06AEND, it does not stop there.
thanks
Joyce
Edited by: Joyce Chan on May 11, 2010 2:29 PM
Edited by: Joyce Chan on May 11, 2010 2:39 PM

For your output type you have to maintiain Print operation - 2
Follow this menu path
OLME -- >messages -->output control -- message types -->Define message type for PO --> Fine tune conterol
maintain print operation - 2 change
For the current PO ,Goto ME22n ,click message , click repeat outpout on further data tab

Output device change

Dears SAPers,
We are having the following problem. The output device is change by one inexistent when the output is executed.
When the user creates the outbound delivery the output is determinate, but not prints yet (status not processed). Here the output device is correct and is the one set in the condition record. Then, when the user executes the post good issue the output device is change by one inexistent call SIS0, and the field Spool request: Name is complete with the name of the message.
Does anyone know what is happening?
I will reward.
Thanks in advance,

Hi Emilio,
please first check the entry in table NAST, field LDEST. Is it correct after saving the delivery ?
I think the best is then to set a breakpoint during the creation of the goods issue in function module MESSAGING in order to find out if the printer is changed here. If this does not help please goto TA V/34, find out the used print program and set a breakpoint there (normally at the beginning of form ENTRY).
Regards,
Andreas

Output Type changes

hi Eperts,
I am using NEU1 output type for sending the FAX using SAP script. Because of some issues now we are sending the FAX through SAP connect.
I want to know what changes I have to make in output type configurations as well as in Print program or Form so that FAX can be sent hrough SAP connect.
Regards
Saurabh

Hi Saurabh,
You need to make the changes in the transaction SCOT.
Also you can refer to the transaction SCOM to see what all changes required for the sapscript/forms.
use Commit_work after your form as it is required in SAP Connect.
Regards,
Atish

Edit Page;Report;Enable CSV Output;Apply Changes;Page Not Found;wwv_flow

Hi,
We have a really annoying error in our application, whereby we are unable to save ANY changes to report attributes if Enable CSV Output is Yes.
I have many pages with Enable CSV Output set to Yes, and when run, the pages can indeed be exported to Excel, fine so far.
However, if we do Edit Page, choose Report change Enable CSV Output to No, then apply changes the option is removed ok - BUT if we then set it back to Yes, when we apply changes again we get a Page Not Found error at this address ;
http://sglas-sand.fm.rbsgrp.net:7780/pls/fdm_uat2/wwv_flow.accept
We obviously dont need to keep changing this value, but the above demonstrates that our reports do currently support CSV output, but for some recent reason, trying to save a page where this option has been changed to Yes causes this crash.
We also seem unable to change and save any other attribute when CSV Output is set to Yes. This leaves us in a tricky situation - unable to change our pages unless we are prepared to remove the Export option!
We were wondering if the support of this this option requires any special processing / objects / etc to be availble / running. Any help greatly appreciated.
John Nice
Royal Bank of Scotland - Finance IT

Hi Scott,
Thanks for the reply. Our errors were like this in the log ;
[Thu Feb 22 14:52:33 2007] [error] [client <private ip removed>] ] [ecid: 1172155953:<private ip removed>] :30306:0:1855,0] mod_plsql: /pls/fdm_uat2/wwv_flow.accept HTTP-404 ORA-06550: line 23, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 23, column 3:\nPL/SQL: Statement ignored\n
Versions are ;
Database : 10.2.02
HTMLDB : 2.2
Apache : 10g release 2
Regards,
John
Message was edited by:
John @ RBoS

Settlement Output Layout Change

We run sales order settlement through batch job in the background using program RKO7VA88. Background jobs produce spool which contains list of error, information and warning messages. It also produce list of sales orders along with value on how much settlement was done for particular sales order line item. Is it possible to change that particular layout to include profit center? Thank you in advance.

hi
go to nact
here assign the proper form to ur output ytpe NEU in Processing routines
take help of ABAPer
regards
kunal

Output On change

Similar Messages

Maybe you are looking for