Output playback problem when Premiere is running

Hi all,
I have output a few videos before and have never had this problem.
Today I output a video and tried to play the resulting file, it was severely discolored pink / green blocks.
If I close premiere down and played the file again it's perfect.
Any ideas why this maybe happening?
Thank you very much for any help in advance.

It sounds like PPro and your media player are fighting for graphics card resources. Check your drivers.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

Problem when trying to run MD04

I am experiencing problems when trying to run my MD04 Collective access, for vendor say X & Y.
I buy many products from these vendors and I therefore need to have access to place these orders anytime of the day (as it can take more than one hour to raise the orders) and it is only allowing me access last thing in the day for some strange reason.
Please can you look into this - I'm not sure if there is a server issue due to the size of the job, but I must have the ability to undertake this task.
I tried to limit the selection further but still the problem is not getting solved.
please tell me what else can be done?
Thanks in advance.
Regards,
Sonal.

Basically when i am trying to do collective access thru MD04 I am putting plant and vendor.
the sys is not displaying the stock reqmt list but is getting time out.
I tried limiting further by putting delivery dates, MRP controller but still it is not working.
What else can be done?
Thanks & Regards,
Sonal

Problems when invoking "ant run" for sample how-to-ejb30-mdb

Hi,
I'm new to J2EE and Java. I get the following error when invoking "<ant run" from the command-line as indicated in MDB 3.0 tutorial "http://www.oracle.com/technology/tech/java/oc4j/10131/how_to/how-to-ejb30-mdb/doc/how-to-ejb30-mdb.html". Note that the sample application ejb30mdb had already been successfully deployed to my stand-alone OC4J 10.1.3.1.0. Can anybody advise on how to resolve this problem?
Buildfile: build.xml
[taskdef] Could not load definitions from resource oracle/ant/taskdefs/deploy/antlib.xml. It could not be found.
[taskdef] Could not load definitions from resource oracle/ant/taskdefs/ws/antlib.xml. It could not be found.
common:
[echo] BuildName: ejb30mdb
[echo] BuildHome: D:\My Documents\foo\sample\how-to-ejb30-mdb
[echo] BuildFile: D:\My Documents\foo\sample\how-to-ejb30-mdb\build.xml
[echo] BuildJVM: 1.5
oracle-env-check:
java-env-check:
init:
[echo] -----> Initializing project properties
run:
[java] java.lang.NoClassDefFoundError: oracle/oc4j/appclient/AppClientContainer
[java] Exception in thread "main"
[java] Java Result: 1
BUILD SUCCESSFUL
Thanks
Travis

Problem solved. The code works. Just a typo when setting the ORACLE_HOME environment variable. However, I do get the following error when invoking "ant run". Is this a problem?
Buildfile: build.xml
[taskdef] Could not load definitions from resource oracle/ant/taskdefs/deploy/antlib.xml. It could not be found.
[taskdef] Could not load definitions from resource oracle/ant/taskdefs/ws/antlib.xml. It could not be found.
common:
[echo] BuildName: ejb30mdb
[echo] BuildHome: D:\My Documents\foo\sample\how-to-ejb30-mdb
[echo] BuildFile: D:\My Documents\foo\sample\how-to-ejb30-mdb\build.xml
[echo] BuildJVM: 1.5
oracle-env-check:
java-env-check:
init:
[echo] -----> Initializing project properties
run:
[java] Jan 25, 2007 4:17:17 PM oracle.j2ee.jndi.JndiMessages warningMultipleReferencesOnRefName
[java] WARNING: Multiple references have been defined using the the same ref name "jms/demoTopic". The container will only bind the reference defined last in the deployment descriptor.
[java] Starting Topic Session
[java] Message Sent to JMS Topic, Check Server Console to See whether MDB got activated!
BUILD SUCCESSFUL
Total time: 3 seconds
Thanks,
Travis

FCP X playback problem when updated to Lion

I am having playback problem in FCP X since I update to Lion.
I transcode my material to ProRes and I also crated proxy but I still have the playback problem.
I didn't have this problem with Mac OS X 10.6.8 Snow Leopard
What can I do:
Should I change my NVIDIA GeForce GT 120 to ATI Radeon HD 5870
Should I add more RAM from 12GB to 32GB
What can I do please help.
My Computer:
Mac Pro (Early 2009)
2 x 2.93 Quad-Core intel Xeon
12 GB Ram
NVIDIA GeForce GT 120
OS X 10.7.4 Lion
FCP X 10.0.5
Drive G-Technology G-Speed es pro Raid 5 with 2.7 TB Free

I started my Mountain Lion upgrade and couldn't get it to load. Turns out that even though I had my Lion upgrade in the apps download section from a year ago, I never upgraded to Lion in the first place. In my case I had to download Lion before I could upgrade to Mountain Lion. Hope this helps.

Premiere Pro CS5.5 Playback problem (when mtulti tasking) (Mac)

Hi,
I have this very weird problem with preimiere pro CS5.5. I've only experienced this today and I've already restarted my mac a number of times and the problem still persists.
Basically, I start up premiere then work on a project, I can do playback no problem, I scrub through the timeline there is audio working, I press the spacebar, the clips play no problems
HOWEVER as soon as I switch (cmd-tab) to let's say Firefox or just even leave premiere for another window. Playback stops working, pressing spacebar won't do anything also even clicking the play button on premiere won't work. I would need to start premiere all over again. The program doesn't hang but te playback just stops working, when I scrub through the timeline, the video moves but there is no audio.
I hope someone can shed light over my problem thanks.
I have never encountered this problem for over a year ever since working on premiere pro CS5/ CS5.5
I'm on a iMac 21.5 inch late 2010.

I just had a similar issue (Mac OS 10.7.3) Premiere Pro CS 5.5.2 was getting very unstable, seemed like it was very sluggish. When I switched to another app, then back to Premiere, pressing Play or spacebar didn't do anything. However if I waited a long time, like a minute, it came back to live. I'm not sure what is going on with my Premiere Pro these days, but it seems like it's gettings slower for me. One thing I do is to use Cocktail to clean the system caches, the reboot, and it seems this temporarily helps Premiere Pro, but after a time it gets boggy again.
Any advice on what to 'clear' to get PPro in an optimized state? I have a relatively older Mac Pro, 8 core but with 24GB of ram and nVidia 4000. It might be my imagination but it seemed 5.0 and 10.6 was faster and more stable than this, but who knows. Any advice is appreciated.

Video playback problem when outputting to TV set

I'll try and keep this brief and to the point.
I have a dual monitor setup: my primary is an LCD monitor; my secondary is a 32" HDTV.
Playing all videos works perfectly in fullscreen on my HDTV, but when using Quicktime the movie won't display on the TV, but it does display on my monitor.
I've gone through all possibilities I can think of. QuickTime is up to date, my hardware is more than capable (proven further since it will play HD Windows Media Video perfectly) and there are no hardware issues. It's purely a QuickTime problem.
Incidently, the same issue occurs when viewing video in iTunes.
Any advice would be hugely appreciated.

A DVI > HDMI cable. (Same cable I use from MacBook > HDTV except with the MacBook I add a mini-DVI adapter.)
I can't use Detect Displays because, when the screen is blue, I can't see the screen in order to click that button.

AVC Playback problem in Premiere CS4

Hi Everyone,
I recently graduated from college and am trying my hand at being a freelance videographer. Before now I've just used my small camcorder for all of my projects, but I wanted to move up to working in HD. So I just bought a brand new HD camera and was really excited to start using it.
I got a few shots, downloaded them onto my computer from the camera chip, and tried to import them in Adobe Premiere Pro CS4. The files imported fine, but when they playback on the source monitor and the program monitor (after I drag it into the timeline) the pixels are jittery, in the wrong position, and sometimes playing backwards. It makes the footage look fuzzy and chunky, and it's really distracting when I go to edit. How do I fix this?
The footage is fine when I play it with Windows Media player.
I thought maybe I choose the wrong preset when I opened a new sequence, but I've tried changing that to multiple different settings and nothing changed. Most of the settings I tried were AVC-Intra & AVCHD.
It looked like a few people were having similar problems, but with different circumstances as mine. And I couldn't tell if they were able to fix the problem yet. I really want to be able to use this new camera for my upcoming projects and I was hoping someone could help.
Here are the specs on my Software, Camera, & Computer:
SOFTWARE:
                Adobe Premiere Pro CS4
CAMERA:
                Panasonic AVCCAM
                Model# AG-HMC150P
                Recording Formats:         PH 1080/60i
                                                        PH 1080/30P
                                                        PH 1080/24P
                                                        PH 720/60P
                                                        PH 720/30P
                                                        PH 720/24P
                                                        HA 1080/60i
                                                        HG 1080/60i
                                                        HE 1080/60i
                Chip: 32 GB SanDisk Extreme (30MB/s)
COMPUTER:
                Asus Essentio CG5290-BP007
                64-bit OS - 9 GB RAM
                Graphics Card: NVIDIA GeForce GTX 260
                Free Upgrade from Vista to Windows 7
Thank you for your help!

What is your hard drive setup?
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all programs
2 - 320G WD Win7 swap file and video projects
3 - 1T WD all video files... read and write
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
- you need AT LEAST 2 drives for video editing, 3 is better
- some HD formats work better with (require) RAID
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

I've got TWO problems when trying to run iTunes

I've been trying to solve them separately, but each one of the answers requires for the other problem to be solved, and I am desperate. I've recently (one week ago) bought an iPad mini and I regret buying it, since I can't sync it to my computer. I don't even know what to do anymore, and its been TWO WEEKS of constantly trying.
The problem started when I tried updating iTunes as usual via the Apple updater. Somehow it gave me an error message, so I did as told by the program and downloaded it manually. After that, I got an R6034 error. Following a thread's advice, I uninstalled every Apple-related program in my computer, even did some cleaning-up, just in case. I reinstalled it, and when I thought I was done, an error popped up claiming that I don't have sufficient privileges to start system services, so Apple Mobile Device failed to start. I tried to fix this, but the R6034 error keeps popping up EVERY time I try to install or even RUN iTunes.
What should I do? All my music is in this computer, and I am even thinking about asking for a refund on my iPad and iPod. iTunes has never given me trouble and I've been using it for at least 5 years, but this problem is big enough to make me reconsider whether or not use it.

I reinstalled it, and when I thought I was done, an error popped up claiming that I don't have sufficient privileges to start system services, so Apple Mobile Device failed to start. I tried to fix this, but the R6034 error keeps popping up EVERY time I try to install or even RUN iTunes.
Doublechecking. Have you worked through the following user tip?
Troubleshooting issues with iTunes for Windows updates

Sudden playback problems in Premiere Pro CS 5.5.2 Mac - audio but no video

This is happening on my 12-core Xeon Mac Pro with 16gb of RAM (Lion 10.7.3), nVIDIA GeForce GTX 285 card, so it is probably not an insufficient-hardware issue... plus nothing has changed in the system that would explain this issue.
I was working on a file combine several short clips a couple of weeks ago, and all was well, despite the fact that I was using the raw FLV files. They imported, showed up and played back in Source just fine, and when I created my sequences they all worked beautifully in the Program monitor as well. I exported them, they looked great, all was unicorns and rainbows.
Until I came back from a trip today.
I repaired my permissions and restarted my machine (I always do that after a time away), and pulled up my file. Nothing at all in my system configuration has changed in the time I've been away and no one else has used it. But when I bring up any of the files or sequences in the source or program monitors, all I get is black, no matter what magnification or playback resolution I specify. I can play them, everything looks normal, the audio plays as if the file is running normally... but no video. If i stop playback and click on the video in the program monitor, I will see a still from that video. But as soon as I play, black.
The strange part is that this also applies to the play MOV files I brought in, and newer ones as well. I've brought files in that are in QT (Apple Animation Codec). H.264, MTS (AVCHD), etc., all files that have previously worked just fine, and all of them suffer from the same issue.
I will do some more system cleaning and restart everything again, but has anyone hadf a similar experience, have an explanation, a solution, anything? I will be in serious trouble if PPro can suddenly not work for me.
Thanks,
Matt

This is happening on my 12-core Xeon Mac Pro with 16gb of RAM (Lion 10.7.3), nVIDIA GeForce GTX 285 card, so it is probably not an insufficient-hardware issue... plus nothing has changed in the system that would explain this issue.
I was working on a file combine several short clips a couple of weeks ago, and all was well, despite the fact that I was using the raw FLV files. They imported, showed up and played back in Source just fine, and when I created my sequences they all worked beautifully in the Program monitor as well. I exported them, they looked great, all was unicorns and rainbows.
Until I came back from a trip today.
I repaired my permissions and restarted my machine (I always do that after a time away), and pulled up my file. Nothing at all in my system configuration has changed in the time I've been away and no one else has used it. But when I bring up any of the files or sequences in the source or program monitors, all I get is black, no matter what magnification or playback resolution I specify. I can play them, everything looks normal, the audio plays as if the file is running normally... but no video. If i stop playback and click on the video in the program monitor, I will see a still from that video. But as soon as I play, black.
The strange part is that this also applies to the play MOV files I brought in, and newer ones as well. I've brought files in that are in QT (Apple Animation Codec). H.264, MTS (AVCHD), etc., all files that have previously worked just fine, and all of them suffer from the same issue.
I will do some more system cleaning and restart everything again, but has anyone hadf a similar experience, have an explanation, a solution, anything? I will be in serious trouble if PPro can suddenly not work for me.
Thanks,
Matt

Playback problem with Premiere Elements 11

Hi,
I have been editing a movie I am making in Premiere Elements 11.
I have edited about 3mins off footage so far.
Today, I opened up the project as normal. The project seemed to open up as normal but will now not allow me to view any of the movie, including any of the project assets.
When I press play, nothing moves.
Please help.
Thanks

What operating system are you running the program on? Which processor does your computer have and how much RAM?
Have you ensured you have the latest version of Quicktime, per the program's requirement?
What model of camcorder is your video coming from and what format and resolution is it?
What are your Project Settings, as listed under the Premiere Elements Edit menu? If your project settings are properly set to match your video, you will NOT see a yellow orange line along the top of the timeline, above your clips, in Expert view. Is this the case with your project?

Problem when trying to run in "Debug Mode" in JDeveloper9i

Hello All ,
i have a problem to debug my application using
JDeveloper9i .
i get an error: "fdebug.exe could not be read "
and Application error box appears .
i did the following steps in the instalation:
1) i installed the JDK 1.3
2) installed the Jdev9i from base installation zip
3) In <jdeveloper_root>\jdev\bin\ i executed the command
InstallOJVM.bat c:\jdk1.3
and get message:
"InstallOJVM successfully"
4) i wrote simple program and put a breakpoint ,
when i'm trying to run the program in "Debug mode" i get an error box message
"fdebug.exe Application Error"
The memory instruction could not be read
please help ,me to fix the problem i need the debuger option .
thanks in advance.

Do you have the file c:\jdk1.3\jre\bin\fdebug.exe, if you don't, you
need it. Look for the file in the base install directory, it should be
there and then copy it to the location above.
Michel

Intermittent, inconsistent playback problems in Premiere Pro CS6

Before I start: I'm not a computer guy, please be patient with me.
This is the problem that prompted me to finally post a question, though I've had similar problems before.
I'm using a macbook pro, 15 inch, late 2011
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 512 MB
Software Mac OS X Lion 10.7.5 (11G63)
Premiere settings:
Video Rendering and playback:
     Renderer: Mercury Playback Engine GPU Acceleration
Video
     Display Format: Timecode
Audio
     Display Format: Audio Samples
I'm editing a video. Things were going great. Randomly, with nothing changing in the premiere settings, or my computer settings or ANYTHING (other than opening a web browser periodically to look up some troubleshooting advice), One of the audio clips goes out.
I rendered the work area. I rendered the audio. I deleted the audio clip and brought it back down into my timeline. The audio works in the source monitor window, but as soon as I bring it into the timline it stops.
This is incredibly frustrating. Mostly because I don't understand how something can just randomly stop working. This software isn't cheap, it should do what it's supposed to do. Being able to see and hear the video you're editing seems like a pretty fundamental function that shouldn't be subject to random bugs.
This clip was working fine a minute ago, now it's not.
Help! Please!

New development: I deleted the file from the project window and re-imported it. It works now. BUT! That shouldn't have happened in the first place, right? If anyone can help me understand how to prevent this type if thing from happening again the future that would be awesome. I don't want to have to continually re-import various clips.
Thanks!

Internet Explorer Java app problem when ESSO client runs on machine

Hi,
I face following situation:
User is working with web application. It is a kind of interface for Document Management System. This application logon is not managed by Oracle Enterprise SSO client (or agent).
When an Oracle ESSO services run on user's computer, user cannot open PDF files from DMS Internet Explorer page with error: UNABLE TO DOWNLOAD APPLET DUE TO SECURITY ISSUE.
When an Oracle ESSO services do not run on user's computer, user can always open PDF files from DMS Internet Explorer page with no errors.
I checked the Internet Explorer security settings and there I can see no limitations on Java, scripts or ActiveX.
My question is:
how Oracle ESSO client/agent affects other Java-based applications or applets?
is there any possible reason while Oracle ESSO client is installed to user computer with package including "Java helper" item?
is there any known and described issue within?
Thank you very much for any answer.
Regards, Kamil
Message was edited by: KamilBrzak
Addition: Described behaviour was under IE8 and IE9. Firefox 22.0 and IE10 works correctly. Java version is 6.21. Operation system is Windows 7 x64.

Say your stub is in a jar called stub.jar.
You need to put that stub somewhere that it can be reached through a protocol for which Java has a URL type - so you can put it on a shared file system and use a file URL or behind an http server and use an http URL.
Let's use http - put stub.jar at the docroot of a web server.
Then, when you start your SERVER code, include this VM parameter:
-Djava.rmi.server.codebase="http://<serveraddress>stub.jar"
Now your client will be able to use http to load the stub file out of stub.jar through http.
If you do use a file URL, make sure the shared directory you put your jar in is not on the client's classpath.

Flash CS3, Captivate 4 Single File SWF output- playback problems

Hello,
I am trying to upload a swf file that I created to a website. I am doing this because that it the only format the site editor will allow me to do.
I tried following the steps in the tutorial on how to embed a swf into a pdf. (http://www.adobe.com/devnet/captivate/articles/movieclip_to_pdf.html)
-The File started as a flv, I opened that it Flash Pro CS3, then exported the file to a SWF (Actionscript3).
                    -I then created a new Captivate project, and inserted a "Animation" to put in the SWF video.
                      (I did this because when I tried inserting the flv it only showed it as 3 seconds, when the video is                                     about 40, and it had no audio)
-I chose the option to not show the borders, but show the player skin (Play,pause, etc.) in Captivate.
-I then exported it to a SWF file (It also created the html, etc.)
There was a standalone SWF file created, that when I played with Flash Player, played not a problem, all of the player controls on the skin worked just fine.
However, when I uploaded the swf to the site, only the player conrols showed, and when I tried clicking on the buttons, nothing happened.   When I clicked on the slider, it just showed where the video was supposed to be "2/1"
Any help would be appreciated a lot, as I am not a flash or captivate expert. (I just started using a couple of days ago)
Thank you,
Chev

Hi there
That's sure a convoluted approach!
chevtony wrote:
Hello,
I am trying to upload a swf file that I created to a website. I am doing this because that it the only format the site editor will allow me to do.
I tried following the steps in the tutorial on how to embed a swf into a pdf. (http://www.adobe.com/devnet/captivate/articles/movieclip_to_pdf.html)
Uhhh, if you want the SWF on the web site, why are you following information for inserting SWF into PDF?
-The File started as a flv, I opened that it Flash Pro CS3, then exported the file to a SWF (Actionscript3).
                    -I then created a new Captivate project, and inserted a "Animation" to put in the SWF video.
                      (I did this because when I tried inserting the flv it only showed it as 3 seconds, when the video is                                     about 40, and it had no audio)
What you don't realize is that if you insert a 40 second video into a 3 second slide, there is no need to adjust the slide play time. There is an option that is automatically set that keeps the slide from moving on until the video completes playing.
-I then exported it to a SWF file (It also created the html, etc.)
That's normal Captivate behavior. You get a few different files. The intent is to upload them all and point the user to the HTML file. It then loads and plays the SWF.
There was a standalone SWF file created, that when I played with Flash Player, played not a problem, all of the player controls on the skin worked just fine.
However, when I uploaded the swf to the site, only the player conrols showed, and when I tried clicking on the buttons, nothing happened.   When I clicked on the slider, it just showed where the video was supposed to be "2/1"
Thank you,
Chev
When you insert FLV you also have to upload the FLV. Captivate plays it by referencing it externally. It is not embedded into the SWF and remains as a separate file to deal with.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

AVCHD lite playback problem in Premiere Elements - No sound

I am importing AVCHD Lite movie files from my Panasonic camera (DMC-FT1) to Adobe Premiere Elements 7. It seems to work just fine, except that it will not play the Audio of the movie files. No sound whatsoever.
I've seen many other posts in the forum regarding sound that drops, but for me, it simply is not playing sound at all.
Any help or pointers would be greatly appreciated!

Thanks. I had a look earlier at the conversion recommendations (http://forums.adobe.com/thread/454585?tstart=0), which seemed to work correctly for me in Premiere Elements, and again using the Koyote Soft product. However, both resulting files still play without audio in Premiere Elements. Strange, I am able to use the (incredibly bad) software product supplied with the camera to import and play the videos with sound; but everything else I've tried has been unsuccessful. (I'll post on how I go with the new iLife 09. I see it's supposed to improve support for AVCHD Lite.)
I'll keep exploring the other FAQs you mention, but happy to hear any other tips as well. Thanks again.

Output playback problem when Premiere is running

Similar Messages

Maybe you are looking for