Output Preview does not show right values of Spots

I have a document created in InDesign. It contains only 1 spot color (no CMYK). Acrobat shows worng spot values in Output Preview (100% for 100% spot, but 4% for 10% spot. Pitstop shows the right value. Can you tell me what is the problem?

Hi Lisa,
First you know for which transaction you want to print the form. For example if it Purchase Order then Transaction is ME22n or ME23n .
The error you are getting might be because of one of the following reason.
1) The output you are using should be configured for particular order number .For example if You want to print the form for a PO number 40000020 For this you must have configured output type in the messages of that order number.
Go to ME22n give the order number  and press enter . In the application tool you can find messages button just click on that and it wil take you to other screen where you can give putput type print medium and printer in Comunication method and in firther data give  start immediately
2)Let us suppose it was configured then the output must have configured properly.
Thanks,
Nageswar

Similar Messages

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Report similar to MC$4 that does not show absolute values

    Hi all,
    We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
    Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
    Thanks in advance!
    George

    HI
    Your input criteria should contain all plant numbers and the period to be analyzed.  Execute the report and then select:  Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month.  Follow the options to export to Excel.  Report will be based on Plant, Storage location and Month.
    Regards

  • Preview does not show any postscript files

    Preview does not show any .ps files in Mac OS 10.4.3. I get an error message "PostScript Conversion Error" when Preview tries to convert the ps file into pdf.
    (I print online banking invoices to postscript using the print option "save as file", because the pdf option isn't always available as a file format.)
    How can I view my ps files?
    (this is a cross-post from the print/fax forum, as no one answered my question there)

    Thanks for the tip. I downloaded Ghostscript, installed it but can't find it once installed and nothing has changed.
    I did however find out that only my online banking PostScript files are unreadable. Other PS files I create with my Canon printer menu are automatically converted into PDF by Preview without a problem. So it must have something to do with the document header or whatever of the online banking files.

  • Preview does not show any images

    Hello. I am running 10.6.5 and Preview does not work. Any image I try it on does not show up on Preview. Is there an existing solution to this problem?

    You can trouble shoot by creating a new user account and see if the problem is still present.
    You can Safe Boot to turn off third-party extensions and see if this is the cause.
    It could be if you install the 10.6.5 Combo Update it may straighten out, particularly if you installed the delta through the Software Updater. No harm here to re-install this combo.

  • When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

    Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • Multicolumn does not show any value when I tried to put a value on column 4 or above

    When I put a value in column 4 or above ( in any row ) multicolumn listbox doesn't show me any return. I got a example from NI forums and changed it to see if it works , but the results are the same.
    Does anyone know about it. I'm using labview 2009 9.0f3
    Thanks in advance

    Can you link to the example you are using?
    What is a "return" that it does not show? I am not familiar with these terms.
    Why don't you attach a simplified version of your VI with steps to demonstrate the problem
    LabVIEW Champion . Do more with less code and in less time .

  • Report S_ALR_87012000 Asset Register does not show correct values sums

    Hi,
    I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
    1-  the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990  - Asset history sheet
    2- if I put  an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
    Could you explain me why? Is there some program bug?
    Thanks in advance
    Giovanna

    Hi
    If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
    The execution for current year can have any date of the fiscal year for report execution
    BR,Ajay M

  • Using transactio code to execute a report does not show default value

    Hi all ,
          I have given a default value of a field on my selection-screen by initialization in a hr report .
    I am using PNP database and default selction-screen in hr report category .
    While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
    Can any body tell why it is so ?
    Thanks & regards
    Sun

    Did you create the transaction as a report transaction?
    Rob

  • Video preview does not show a quicktime option

    My main videos are going to YouTube and I would like my preview in Premiere Pro CC to be quicktime so I can edit correctly to the format.  Under New Sequence Settings it does not give me that option.  Is there something I need to manually install?

    What platform are you on? QuickTime is available as the Preview File Format [PFF] only on Mac.
    In general, the PFF is not critical the final encoded output, but there are a couple exceptions. So I'm interested curious about why you feel it's important to have the PFF match your eventual export format.
    Also, my understanding is that the preferred format for YouTube is h.264, not QuickTime. I haven't studied YouTube's recommendations/requirements, but I know for a fact that the format for all YouTube presets is h.264.

  • PDF document opened with Preview does not show french accents

    Hi everybody,
    I've got some issues with PDF documents opened with Preview.
    They show a blank space for all the accented vowels.
    If I open the same document with Safari, it's the same. But with Chrome, it works perfectly.
    I assume there's a problem with fonts, but, nothing wrong with fontbook (checked duplicates for instance).
    Last information : it looks ok within chrome on my Imac, but the issue comes back when I try to print from chrome app...the accents are gone on the sheet.
    Any idea ? I don't want to install Adobe reader...
    Thanks for your help !
    http://www.art-shots.net/

    I don't want to install Adobe reader...
    Why not?  It can handle some pdf's that Preview can't.  At least it's worth a try.
    In case you change you mind get it from here.

  • Output Panel does not show

    I'm trying to Output to PDF from the Bridge CS4.
    When I click on the Output button to get the Output workspace, no Output panel appears on the right. In fact, I cannot find the Output Panel at all. It is supposed to contain the buttons to create a PDF or Web Gallery, but the buttons are not there. I downloaded the updater for Mac, rebooted my computer, but still no Output Panel. If I choose Window > Workspace > Output, no Output Panel appears.

    Jay,
    Here are a couple of things to try:
    * Windows > Workspace > Reset Standard Workspaces
    * Bridge > Preferences > Output > Reset Panel to Defaults
    * Trash Bridge Preferences by holding down the Option key as you launch Bridge.
    One of these actions might do the trick.

  • The previewer does not show for the project itself only the events

    I recently bought Ilife 11 and installed it, before I left ilife '09 I was working on a video in imovie, So immediately I come to work on it after installing ilife '11
    I come to find that none of my current projects would appear in the previewer at the top right, only the events. I could hear the sound of the project, but not see the actual project, I found that if i view it fullscreen I can view the project... but we all know that you need to have the previewer view so you can edit text and stuff... Is there any way to fix this problem? I kinda wanted to get my video out by next wednesday, and at this point Imovie is unusable.

    Which iPad do you  have?
    http://support.apple.com/kb/HT5887
    only certain models support air drop

  • Watermark comes up in PDF output but does not show in RTF

    Hi All,
    I am using rtf templates with watermarks (or Background Images). The requirement is to convert these templates to pdf and rtf formats. The watermarks show perfectly when the rtf is converted to pdf format, but when the same template is converted to a rtf, all the formatting disappears and no watermark appears. What may be the issue here? It would be great if someone could help me out on this issue.
    The version details are as follows:
    The OBIEE and BI Publisher version is 10.1.3.4. We have not applied any patches except for one related (7140673) to presentation services. The OS is windows 2003 Server.
    Is there any patch that I need to add to enable this feature? Or is this issue related to something else?

    We have applied patch 11846804 (I believe the latest patch) and I only see a fix related to PDF output but no reference to anything for RTF in the readme file.... You may have to check with Oracle by logging an SR.
    Thanks,
    Bipuser

  • User exit variable I_STEP=1 does not show default value WebI selection scr

    Hello,
    We have a BW query with a user exit variable. We have written user exit code under I_STEP = 1 so that the default value for the field is displayed on the selection screen to the user. Works very well on the BW side.
    We based a universe on top of the query and then created a WebI report.
    When the WebI report is executed the default value is NOT seen on the selection screen,
    Note:
    1. If the user exit variable is optional and we execute the report, the default value is NOT seen on the selection screen. However if the report is executed without entering any value for the field the logic under I_STEP = 1 is picked up and the report gets the correct output
    1. If the user exit variable is mandatoryand we execute the report, the default value is NOT seen on the selection screen. The user now has to enter the value for the field.
    The scheduled reports will work in case of optional user exit variable.
    However this amounts to loss of functionality.
    Is this a known bug?
    Is there a way to display default values based on user exit variables on the WebI selection screen?
    Kindly advice. Btw we are on XI 3.1 SP3
    Rgds
    Edited by: Anup Deshmukh on Jun 29, 2010 11:13 PM

    OSS Note 1285993 - "Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe"  deals with this issue and has deemed it out of scope for XI 3.1 SP3.
    Rgds

Maybe you are looking for