Output preview works only when preview dialogue box is open?

The output preview setting certainly takes effect, but only when the output preview dialogue box is open, so that accurately previewing images in reading mode is not possible; it's only possible to see a preview by going to an image and opening the OP dialogue box. As soon as the OP dialogue box is closed, the image reverts back to its pre-preview state. This can't be right!

Thanks for your feedback. I had tried to navigate with the dialogue box open using the "hand", which didn't work; I see now that you can still go from page to page with the box open using either keyboard command or menu arrows.
I was actually incorrect in referring to "reading mode"; I meant to say "full screen" mode. And again, since the cursor doesn't act as a cursor but rather as a pinpoint when the dialogue box is open, I incorrectly assumed that all navigation (including full screen mode) was disabled. This, I now see, is not the case.

Similar Messages

  • How to setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1

    How do I setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1?
    I see screenshots where there are boxes to 'enable' guest network but these simply do not apear on the Wireless tab in AirPort Utility

    I now have a guest account, thanks to you!
    I did the factory reset and was able to set up the guest account.
    There were 3 problems, all of which I was able to solve.
    The first problem was connect to Ethernet, which I selected by WAN port, as shown in the first screen shot. This page used to read just Ethernet and the Bridge Mode.
    The second problem was whether to share a range of addresses or share a public IP address. I selected share a public IP address as shown in the first screen shot. I had tried the range of IP addresses in my earlier attempts, the ones that failed. Hopefully this will have no effect.
    I have forgotten what the third problem was - only excuse is a few too many flavored drinks. I didn't have any problems solving it though.
    What is really weird is I can log on to Guest and use on my iPad (first generation), my wife's iPod Touch (third generation), and my wife's 2011 MacBook Pro. I can't log onto Guest on my 2008 iMac, even after a restart. I get the image below.
    Since I don't lug my iMac around a lot and it is connected by Ethernet, while my little make it right brain says figure this out, I am not going to worry about it.
    Thank you again for your time and patience in helping me solve this.
    Eric Root

  • Does the NavigationController work only when placed in appDelegate?

    I am trying to build application that has a tab bar controller with two view and the first view contains a segmented control.
    Based on the decision of the segmented control, I load the tableview. The table view has an instance of navigation Controller in which I have assigned the tableview controller as a rootview controller. When I click on any row of the table view, a new controller gets pushed on the table view. In my case, the new view does not show up on the screen, once the row is clicked. I used NSlog and checked that the views pushed on the stack are correct.
    I read many threads here and saw that all of them use tabBarController and then it directly uses the navigationController and viewcontroller. Is this the only config that works ?
    What if I want to have a tabBarController->tableViewController->NavigationController, isn't it possible? Can anyone please help?

    WitchKing wrote:
    So, if I understand this fully, I can initialize the navigation controller as soon as the any row is clicked and put the tableView I am on as my rootView for the navController. and also push the next view controller I want to see, on its stack. and present the navigation controller's view.
    The usual way to implement a table view drill-down would be to make the first table view (or the content view which includes it) the root view of the nav controller. I.e. the table view's controller would be the root controller. When you do it that way all the objects will do what they were designed to do, and the code to push and pop subsequent views will almost write itself.
    However there's no reason you can't do what you described, which (if I understood) would be to attach the nav controller's view to the hierarchy only after a row in the table is selected. Note however, that you couldn't then expect the nav controller to make that first transition from the parent table view. You would have to provide your own transition to the nav controller's view.
    You bring up a good point in any case. I never explicitly answered the question in the Subject line of this thread.
    does the NavigationController work only when placed in appDelegate?
    No, there is no requirement to create a nav controller in any particular position of the view hierarchy. Unlike a tab controller, a nav controller need not be the root of the hierarchy (i.e. added directly to the key window). In fact you'll find several examples in the docs which show one or more nav controllers under some other controller.
    there might be some problem with adjusting bar heights and etc though.
    I'm not sure you proposed anything that would make it difficult to configure a table view. One nav controller issue that will impact table view position and size is the attempt to hide the nav bar which would otherwise appear above the table. I walked, unsuspecting, into this problem when I tried to help with another, currently ongoing thread that might interest you: [http://discussions.apple.com/message.jspa?messageID=9606805#9606805].
    While I'm pasting links, this one is also relevant to your post: [http://discussions.apple.com/message.jspa?messageID=9607946#9607946].
    Thank you for the very kind words about my posts. For some reason, this past few weeks I've been spending most of my forum helper time writing about table views and nav controllers. I sure hope I've been dispensing correct information. It's not like I have any knowlege of the internals. These puppies are black boxes to me, so I'm just going by the same docs you have and my own (growing!) collection of test beds.
    \- Ray

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

  • Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

    Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

    one of those days --- it's the PLACE dialogue box

  • Why is Fault Policy working only when the BPEL's transaction is requiresNew

    Hi All
    I've defined Fault policy & fault bindings files for faults in my BPEL process. I'm using Oracle SOA Suite 11g.
    But the fault management framework is properly working only when the transaction property(bpel.config.transaction) of the BPEL is set to "requiresNew" in composite.xml
    When i modify it ot required, its not working, i.e. it is waiting for some period and erroring out. I could not manage these errors from the EM as we do for those in Fault Management Framework.
    Why is this behavior?
    I went thru this article, but could not understand it
    Transaction and Fault Propagation Semantics in BPEL Processes(http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/soa_transactions.htm)
    Can someone pls explain this.
    Regards
    RaviKiran.

    Please refer http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/soa_transactions.htm
    Thanks,
    S

  • Web ADI works only when cache is cleared

    I have created a custom integrator and the web ADI component works only when I clear the cache from the functional administrator responsibility in Oracle Apps. The component has a lot of validations for the fields and is expected to insert upto 2000 lines, It works fines for a small number of lines but the web ADI hangs for a large number of lines (>500). But if I clear the cache, it works fine. Anyone has a solution for this, cause I cant clear the cache always and I cant tell my customer to do the same.
    G. Arun
    Oracle SSI

    The WebADI caching can be very confusing. I made a little summary of what you can do to avoid caching problems like:
    "ORA-06508: PL/SQL: Could not Find Program Unit being Called in Custom Web ADI" or
    "SQL exception occurred during PL/SQL upload"
    A) clear cache with http://<machine>:<port>/OA_HTML/BneAdminServlet
    B) clear IE cache & restart
    C) clear the cache from the functional administrator responsibility
    D) Bounce the Apache server
    E) SQL command: Alter system flush shared_pool
    F) Download another WebADI spreadsheet (but you can re-use your old spreadsheet)
    G) log out and log back in EBS
    H) login at another computer and try it there
    ...or sometimes just wait for a while till it works again.
    Jeroen

  • Foreing keys works only when created as CAPITAL?

    Hello,
    When working with HTML DB tutorial, I have noticed that foreign keys works only when I do create them as CAPITAL. I did create some foreign keys manually, and when I was trying "query by example" it did not work correctly unles I did re-create the foreign keys using all captials in their name. Why is it that?
    Thank you,
    DanielD

    I let it dry out more and it started working. It still has a quirk or two but I can live with it.

  • My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

    My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

    Try plugging the headphones in and gently wiggling them around for a few seconds. It may be that the sensor that tells the iPhone that headphones are plugged in has gotten stuck. If this doesn't work, they try a reset (hold down Sleep/Wake and Home all the way until the Apple logo appears on the screen).

  • USB OTG Work only When USB Debugging is On

    My USB OTG worked correctly. But Now it works only when USB debugging is turend on. What Should I do Now

    @ytheekshana
    what if you repair the phone with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT201401 Microphone works only when using the phone in hands-free

    Microphone works only when using the phone in hands-free (speaker on) mode.  Otherwise, only a constant buzz, accompanied by regular clicks (repeating 2-3 times/sec) can be heard by called persons or when recording a memo.  Makes Siri unusable, and cannot make private calls unless in a private area.  Does anybody have a fix for this?

    Okay I just solved the problem myself..
    For anyone that may have the same issue:
    The microphone used when recording video, is the little dot next to the jack on top of the iPhone 4S (maybe also iPhone 4, don't know). There was some dirt in this tiny little hole, and I simply just removed it with a very thin needle, and now it works great!

  • HT204088 The directions you provided above doesnt even work!  when I selected "Click to open your account", there is an ERROR message and takes me to no where!  when I try to access my itunes account, it says I have no history?

    The directions you provided above doesnt even work!  when I selected "Click to open your account", there is an ERROR message and takes me to no where!  when I try to access my itunes account, it says I have no history?

    You are not able to view purchase history on your iOS device.  You may only re-download previous purchases from the iOS device.
    To review your iTunes Store account's purchase history, follow the steps in this article from a computer only:
    Seeing your iTunes Store purchase history and order numbers
    http://support.apple.com/kb/HT2727

  • Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

    Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

    Oldcameraman
    Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
    I have answered your most recent of the duplicates
    Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
    It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
    longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
    am not sure can be used.
    Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
    above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
    ATR

  • I keep getting the same dialogue box upon opening Firefox but don't know what to do about it

    I keep getting the same dialogue box upon opening Firefox but don't know what to do about it "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features." I have gone to tools - general tab - browse files - but it wont let me browse or set a place to staore files. Any ideas?

    Try the procedures shown in this link - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

Maybe you are looking for